[why]
Currently the amdgpu DM psr configuration parameters are hardcoded
before feeding into the DC helper to setup PSR. We would define a
helper which is to calculate parts of the psr config fields to
avoid hard-coding.
[how]
To make helper shareable, declare and define the helper in the
module_helper, to set/update below fields:
- psr remote buffer setup time
- sdp tx line number deadline
- line time in us
- su_y_granularity
- su_granularity_required
- psr_frame_capture_indication_req
- psr_exit_link_training_required
add another helper to check given the stream context, if there is
only one stream and the output is eDP panel connected.
changes in v2:
------------------
- add detailed comment for how psr setup time is calculated as per
eDP 1.5 spec
Cc: Chandan Vurdigerenataraj <chandan.vurdigerenataraj@amd.com>
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some specific TCON chip has HW limitation to support PSRSU+DSC.
[how]
Force ffu mode when DSC enabled if we detect it is the specific
model from sink OUI DPCD. And disable ABM update for this case.
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Feature requires synchronization of dig, pipe, and cursor locking
between driver and DMUB fw for PSR-SU
[how]
return True if PSR-SU in the checker should_use_dmub_lock()
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
While support ALPM, do ALPM state transition while PSR entry/exit.
ALPM is needed for PSR-SU feature, and since the function is ready,
we'd enable it by default.
- Add psr level definition to enable/disable ALPM and set ALPM
powerdone mode.
- Enable ALPM by default
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
When DC driver send PSR exit dmub command to DMUB FW, it might not
wait until PSR exit. Then it may hit the following deadlock situation.
1. DC driver send HW LOCK command to DMUB FW due to frame update
2. DMUB FW Set the HW lock
3. DMUB execute PSR exit sequence and stuck at polling DPG Pending
register due to the HW Lock is set
4. DC driver ask DMUB FW to unlock HW lock, but DMUB FW is polling
DPG pending register
[how]
The reason why DC driver doesn't wait until PSR exit is because some of
the PSR state machine state is not update the dc driver. So when DC
driver read back the PSR state, it take the state for PSR inactive.
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The current PSR SU programming margin is fixed base on FHD 60HZ
panel. If the resolution and refresh rate become higher, the time
of current margin might not cover the programming SU time.
[how]
Notice that the programming SU time is the same among different
panels.
Instead of fixing the margin with target line number, change the
margin unit to micro second which indicate the time needed for
programming SU. Then FW set the margin line number base on the
line time and margin time.
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & how]
We only support line capture indication as 0 for PSRSU
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The Y-granularity panel parameter indicate the grid
pattern granularity in the Y direction for PSRSU.
[How]
Send the Y-granularity data by PSR_COPY_SETTINGS dmub command.
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable pipe1 support starting from SIENNA CICHLID asic
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Starting from SIENNA CICHLID asic supports two gfx pipes, enabling
two graphics queues, 1 on each pipe, pipe0 queue0 would be the normal
piority queue and pipe1 queue0 would be the high priority queue
Only one queue per pipe is visble to SPI, SPI looks at the priority
value assigned to CP_GFX_HQD_QUEUE_PRIORITY from each of the queue's
HQD/MQD.
Create contexts applying AMDGPU_CTX_PRIORITY_HIGH which submits job
to the high priority queue on GFX pipe1. There would be starvation
of LP workload if HP workload is always available.
v2:
- remove unnecessary check(Nirmoy)
- make pipe1 hardware support a separate patch(Nirmoy)
- remove duplicate code(Shashank)
- add CSA support for second gfx pipe(Alex)
v3(Christian):
- fix incorrect indentation
- merge COMPUTE and GFX switch cases as both calls the same function.
v4:
- rebase w/ latest code base
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allocate memory for register value and use the same values for devcoredump.
v1 -> v2: Change krealloc_array() to kmalloc_array()
v2 -> v3: Fix alignment
Signed-off-by: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Reviewed-by: Shashank Sharma <Shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
To support PSR2 Source DPCD configuration
[How]
Update the PSR2 Source DPCD settings while the PSR2 enabled
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
We need to implement the VSC packet rev4 that is required by PSRSU.
Follow the eDP 1.5 spec pg. 257
changes in v2:
-------------------
- set vsc packet rev2 for PSR1
Cc: Chandan Vurdigerenataraj <chandan.vurdigerenataraj@amd.com>
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Based on PSRSU specification, every selective update frame need to use
two SDP to indicate the frame active range. So we occupy another GSP1
for PSRSU execution.
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In PSR-SU design, the DMUB FW handles the combination of multiple
dirty rectangles.
[how]
- create DC dmub update dirty rectangle helper which sends the
dirty rectangles per pipe from DC to DMUB, and DMUB FW will
handle to combine the dirty RECTs
- call the helper from DC commit plane update function.
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
set psr version as PSR-SU in kernel-FW interface function to ensure
the correct dmub command parameter is fed into FW.
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The PS/2 bus defines data and clock line to be open drain, this should
be reflected in the gpio flags set in the binding.
Especially, this is important since the clock line sometimes is driven
by the host while being used as interrupt source.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220529132638.13420-2-danilokrummrich@dk-develop.de
Convert the ps2-gpio dt-binding documentation to DT schema format using
the json-schema.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Danilo Krummrich <danilokrummrich@dk-develop.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220529132638.13420-1-danilokrummrich@dk-develop.de
If user requests for NFT_CHAIN_HW_OFFLOAD, then check if either device
provides the .ndo_setup_tc interface or there is an indirect flow block
that has been registered. Otherwise, bail out early from the preparation
phase. Moreover, validate that family == NFPROTO_NETDEV and hook is
NF_NETDEV_INGRESS.
Fixes: c9626a2cbd ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The three commits:
36fd2a65bc ("dt-bindings: display: convert Arm HDLCD to DT schema")
0f6983509e ("dt-bindings: display: convert Arm Komeda to DT schema")
2c8b082a3a ("dt-bindings: display: convert Arm Mali-DP to DT schema")
convert the arm display dt-bindings, arm,*.txt to arm,*.yaml, but miss to
adjust its reference in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about
broken references.
Repair these file references in ARM HDLCD DRM DRIVER, ARM KOMEDA DRM-KMS
DRIVER and ARM MALI-DP DRM DRIVER.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220601041746.22986-1-lukas.bulwahn@gmail.com
There is a limitation in TI DP83867 PHY device where SGMII AN is only
triggered once after the device is booted up. Even after the PHY TPI is
down and up again, SGMII AN is not triggered and hence no new in-band
message from PHY to MAC side SGMII.
This could cause an issue during power up, when PHY is up prior to MAC.
At this condition, once MAC side SGMII is up, MAC side SGMII wouldn`t
receive new in-band message from TI PHY with correct link status, speed
and duplex info.
As suggested by TI, implemented a SW solution here to retrigger SGMII
Auto-Neg whenever there is a link change.
v2: Add Fixes tag in commit message.
Fixes: 2a10154abc ("net: phy: dp83867: Add TI dp83867 phy")
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Sit, Michael Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220526090347.128742-1-tee.min.tan@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Focusrite Saffire 6 has fixed audioformat quirks with multiple
endpoints assigned to a single altsetting. Unfortunately the generic
parser couldn't detect the sync endpoint correctly as the implicit
sync due to the missing EP attribute bits. In the former kernels, it
used to work somehow casually, but it's been broken for a while after
the large code change in 5.11.
This patch cures the regression by the following:
- Allow the static quirk table to provide the sync EP information;
we just need to fill the fields and let the generic parser skipping
parsing if sync_ep is already set.
- Add the sync endpoint information to the entry for Saffire 6.
Fixes: 7b0efea4ba ("ALSA: usb-audio: Add missing ep_idx in fixed EP quirks")
Reported-and-tested-by: André Kapelrud <a.kapelrud@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220606160910.6926-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When ep_idx is already non-zero, it means usually a capture stream
that is set up explicity by a fixed-format quirk, and applying the
check for generic (non-implicit-fb) sync EPs might hit incorrectly,
resulting in a bogus sync endpoint for the capture stream.
This patch adds a check for the ep_idx and skip if it's a secondary
endpoint. It's a part of the fixes for regressions on Saffire 6.
Fixes: 7b0efea4ba ("ALSA: usb-audio: Add missing ep_idx in fixed EP quirks")
Reported-and-tested-by: André Kapelrud <a.kapelrud@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220606160910.6926-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If we're about to send the first layoutget for an empty layout, we want
to make sure that we drain out the existing pending layoutget calls
first. The reason is that these layouts may have been already implicitly
returned to the server by a recall to which the client gave a
NFS4ERR_NOMATCHING_LAYOUT response.
The problem is that wait_var_event_killable() could in principle see the
plh_outstanding count go back to '1' when the first process to wake up
starts sending a new layoutget. If it fails to get a layout, then this
loop can continue ad infinitum...
Fixes: 0b77f97a7e ("NFSv4/pnfs: Fix layoutget behaviour after invalidation")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the server tells us that a pNFS layout is not available for a
specific file, then we should not keep pounding it with further
layoutget requests.
Fixes: 183d9e7b11 ("pnfs: rework LAYOUTGET retry handling")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There is null pointer dereference because i_op == NULL.
The bug happens because we don't initialize i_op for records in $Extend.
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Reported-by: Liangbin Lian <jjm2473@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Now we save a copy of primary record for restoration.
Also now we remove all attributes from subrecords.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Pointer to options was freed twice on remount
Fixes xfstest generic/361
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
This commit makes function a bit more readable
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Abort path release flow rule object, however, commit path does not.
Update code to destroy these objects before releasing the transaction.
Fixes: c9626a2cbd ("netfilter: nf_tables: add hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Release the list of new hooks that are pending to be registered in case
that unsupported flowtable flags are provided.
Fixes: 78d9f48f7f ("netfilter: nf_tables: add devices to existing flowtable")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add mt8186 hw gain dai driver.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220523132858.22166-7-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mt8186 hostless dai driver.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220523132858.22166-6-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
