Add mt8186 adda dai driver.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220523132858.22166-5-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mt8186 audio cg control. Audio clock gates are registered to
CCF for reference count and clock parent management.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220523132858.22166-4-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Mt6366 is a new version of mt6358, and they are same about audio part.
So we can reuse the driver of mt6358 that add a new compatible string
inside of the mt6358 driver.
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Link: https://lore.kernel.org/r/20220523132858.22166-2-jiaxin.yu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While using SCMI iterators helpers a few local automatic variables are
defined but then used only as input for sizeof operators.
cppcheck is fooled to complain about this with:
| drivers/firmware/arm_scmi/sensors.c:341:48: warning: Variable 'msg' is
| not assigned a value. [unassignedVariable]
| struct scmi_msg_sensor_list_update_intervals *msg;
Even though this is an innocuos warning, since the uninitialized variable
is at the end never used in the reported cases, fix these occurences all
over SCMI stack to avoid keeping unneeded objects on the stack.
Link: https://lore.kernel.org/r/20220530115237.277077-1-cristian.marussi@arm.com
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Even though malformed replies from firmware must be treated carefully to
avoid memory corruption in the kernel, some out-of-spec SCMI replies can
be tolerated to avoid breaking existing deployed system, as long as they
won't cause memory issues.
Relax the sanity checks on the recieved protocol list in the base protocol
to avoid breaking one of the deployed platform whose firmware is not easily
upgradable currently.
Link: https://lore.kernel.org/r/20220523171559.472112-1-cristian.marussi@arm.com
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Reported-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Tested-By: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Michael Riesch <michael.riesch@wolfvision.net>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Upstream commit 9f73f1aef9 ("btrfs: force v2 space cache usage for
subpage mount") forces subpage mount to use v2 cache, to avoid
deprecated v1 cache which doesn't support subpage properly.
But there is a loophole that user can still remount to v1 cache.
The existing check will only give users a warning, but does not really
prevent to do the remount.
Although remounting to v1 will not cause any problems since the v1 cache
will always be marked invalid when mounted with a different page size,
it's still better to prevent v1 cache at all for subpage mounts.
Fixes: 9f73f1aef9 ("btrfs: force v2 space cache usage for subpage mount")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we start an unmount, at close_ctree(), if we have the reclaim task
running and in the middle of a data block group relocation, we can trigger
a deadlock when stopping an async reclaim task, producing a trace like the
following:
[629724.498185] task:kworker/u16:7 state:D stack: 0 pid:681170 ppid: 2 flags:0x00004000
[629724.499760] Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs]
[629724.501267] Call Trace:
[629724.501759] <TASK>
[629724.502174] __schedule+0x3cb/0xed0
[629724.502842] schedule+0x4e/0xb0
[629724.503447] btrfs_wait_on_delayed_iputs+0x7c/0xc0 [btrfs]
[629724.504534] ? prepare_to_wait_exclusive+0xc0/0xc0
[629724.505442] flush_space+0x423/0x630 [btrfs]
[629724.506296] ? rcu_read_unlock_trace_special+0x20/0x50
[629724.507259] ? lock_release+0x220/0x4a0
[629724.507932] ? btrfs_get_alloc_profile+0xb3/0x290 [btrfs]
[629724.508940] ? do_raw_spin_unlock+0x4b/0xa0
[629724.509688] btrfs_async_reclaim_metadata_space+0x139/0x320 [btrfs]
[629724.510922] process_one_work+0x252/0x5a0
[629724.511694] ? process_one_work+0x5a0/0x5a0
[629724.512508] worker_thread+0x52/0x3b0
[629724.513220] ? process_one_work+0x5a0/0x5a0
[629724.514021] kthread+0xf2/0x120
[629724.514627] ? kthread_complete_and_exit+0x20/0x20
[629724.515526] ret_from_fork+0x22/0x30
[629724.516236] </TASK>
[629724.516694] task:umount state:D stack: 0 pid:719055 ppid:695412 flags:0x00004000
[629724.518269] Call Trace:
[629724.518746] <TASK>
[629724.519160] __schedule+0x3cb/0xed0
[629724.519835] schedule+0x4e/0xb0
[629724.520467] schedule_timeout+0xed/0x130
[629724.521221] ? lock_release+0x220/0x4a0
[629724.521946] ? lock_acquired+0x19c/0x420
[629724.522662] ? trace_hardirqs_on+0x1b/0xe0
[629724.523411] __wait_for_common+0xaf/0x1f0
[629724.524189] ? usleep_range_state+0xb0/0xb0
[629724.524997] __flush_work+0x26d/0x530
[629724.525698] ? flush_workqueue_prep_pwqs+0x140/0x140
[629724.526580] ? lock_acquire+0x1a0/0x310
[629724.527324] __cancel_work_timer+0x137/0x1c0
[629724.528190] close_ctree+0xfd/0x531 [btrfs]
[629724.529000] ? evict_inodes+0x166/0x1c0
[629724.529510] generic_shutdown_super+0x74/0x120
[629724.530103] kill_anon_super+0x14/0x30
[629724.530611] btrfs_kill_super+0x12/0x20 [btrfs]
[629724.531246] deactivate_locked_super+0x31/0xa0
[629724.531817] cleanup_mnt+0x147/0x1c0
[629724.532319] task_work_run+0x5c/0xa0
[629724.532984] exit_to_user_mode_prepare+0x1a6/0x1b0
[629724.533598] syscall_exit_to_user_mode+0x16/0x40
[629724.534200] do_syscall_64+0x48/0x90
[629724.534667] entry_SYSCALL_64_after_hwframe+0x44/0xae
[629724.535318] RIP: 0033:0x7fa2b90437a7
[629724.535804] RSP: 002b:00007ffe0b7e4458 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[629724.536912] RAX: 0000000000000000 RBX: 00007fa2b9182264 RCX: 00007fa2b90437a7
[629724.538156] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000555d6cf20dd0
[629724.539053] RBP: 0000555d6cf20ba0 R08: 0000000000000000 R09: 00007ffe0b7e3200
[629724.539956] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[629724.540883] R13: 0000555d6cf20dd0 R14: 0000555d6cf20cb0 R15: 0000000000000000
[629724.541796] </TASK>
This happens because:
1) Before entering close_ctree() we have the async block group reclaim
task running and relocating a data block group;
2) There's an async metadata (or data) space reclaim task running;
3) We enter close_ctree() and park the cleaner kthread;
4) The async space reclaim task is at flush_space() and runs all the
existing delayed iputs;
5) Before the async space reclaim task calls
btrfs_wait_on_delayed_iputs(), the block group reclaim task which is
doing the data block group relocation, creates a delayed iput at
replace_file_extents() (called when COWing leaves that have file extent
items pointing to relocated data extents, during the merging phase
of relocation roots);
6) The async reclaim space reclaim task blocks at
btrfs_wait_on_delayed_iputs(), since we have a new delayed iput;
7) The task at close_ctree() then calls cancel_work_sync() to stop the
async space reclaim task, but it blocks since that task is waiting for
the delayed iput to be run;
8) The delayed iput is never run because the cleaner kthread is parked,
and no one else runs delayed iputs, resulting in a hang.
So fix this by stopping the async block group reclaim task before we
park the cleaner kthread.
Fixes: 18bb8bbf13 ("btrfs: zoned: automatically reclaim zones")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix warnings reported by checkpatch tool. Below are the errors fixed,
drivers/net/wireless/ath/ath11k/hal_rx.c:760: 'recevied' may be misspelled - perhaps 'received?
drivers/net/wireless/ath/ath11k/qmi.c:2232: Prefer strscpy over strlcpy
drivers/net/wireless/ath/ath11k/qmi.c:2238: Prefer strscpy over strlcpy
drivers/net/wireless/ath/ath11k/qmi.c:2662: Prefer strscpy over strlcpy
drivers/net/wireless/ath/ath11k/mac.c:7836: 'atleast' may be misspelled - perhaps 'at least'?
drivers/net/wireless/ath/ath11k/wmi.c:6566: 'succeded' may be misspelled - perhaps 'succeeded'?
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220602131350.29486-1-quic_mpubbise@quicinc.com
Currently ar->ht_cap_info is not set anywhere in the code, this could
result in LDPC config computed wrongly in the set_bitrate_mask() hook
and eventually sending wrong config to the target. Fix this by checking
the LDPC support from the band HT capabilities of the radio instead.
Furthermore, it looks like firmwares running on the ath11k hardware
do not set WMI_HT_CAP_LDPC for advertising the TX LDPC capability,
WMI_HT_CAP_TX_LDPC is set instead and this should be checked for
getting hardware's TX LDPC support. This is true for QCA6390, WCN6855
& WCN6750 hardware.
Also, remove unused variables ht_cap_info & vht_cap_info from
struct ath11k{}.
Found this during code review.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220602124142.29909-1-quic_mpubbise@quicinc.com
Currently when firmware recovery is in progress, we do not queue REO
commands to the firmware, instead -ESHUTDOWN will be returned to the
caller leading to a failure print on the console. The REO command in
the problem scenario is sent for all tids of a peer in which case we
will have 16 failure prints on the console for a single peer. For an
AP usecase, this count would be even higher in a worst case scenario.
Since these commands are bound to fail during firmware recovery, it
is better to avoid printing these failures and thereby avoid message
flooding on the console.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Fixes: 8ee8d38ca4 ("ath11k: Fix crash during firmware recovery on reo cmd ring access")
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220602122929.18896-1-quic_mpubbise@quicinc.com
Currently a couple of debug_mask entries are mapped to the same value,
this could enable unintended driver logging. If enabling DP_TX logs was
the intention, then this could also enable PCI logs flooding the dmesg
buffer or vice versa. Fix this by correctly assigning the debug masks.
Found during code review.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00887-QCAMSLSWPLZ-1
Fixes: aa2092a9ba ("ath11k: add raw mode and software crypto support")
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220602115621.15339-1-quic_mpubbise@quicinc.com
By assigning xen-grant DMA ops we will restrict memory access for
passed device using Xen grant mappings. This is needed for using any
virtualized device (e.g. virtio) in Xen guests in a safe manner.
Please note, for the virtio devices the XEN_VIRTIO config should
be enabled (it forces ARCH_HAS_RESTRICTED_VIRTIO_MEMORY_ACCESS).
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/1654197833-25362-9-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Use the presence of "iommus" property pointed to the IOMMU node with
recently introduced "xen,grant-dma" compatible as a clear indicator
of enabling Xen grant mappings scheme for that device and read the ID
of Xen domain where the corresponding backend is running. The domid
(domain ID) is used as an argument to the Xen grant mapping APIs.
To avoid the deferred probe timeout which takes place after reusing
generic IOMMU device tree bindings (because the IOMMU device never
becomes available) enable recently introduced stub IOMMU driver by
selecting XEN_GRANT_DMA_IOMMU.
Also introduce xen_is_grant_dma_device() to check whether xen-grant
DMA ops need to be set for a passed device.
Remove the hardcoded domid 0 in xen_grant_setup_dma_ops().
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/1654197833-25362-8-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
In order to reuse generic IOMMU device tree bindings by Xen grant
DMA-mapping layer we need to add this stub driver from a fw_devlink
perspective (grant-dma-ops cannot be converted into the proper
IOMMU driver).
Otherwise, just reusing IOMMU bindings (without having a corresponding
driver) leads to the deferred probe timeout afterwards, because
the IOMMU device never becomes available.
This stub driver does nothing except registering empty iommu_ops,
the upper layer "of_iommu" will treat this as NO_IOMMU condition
and won't return -EPROBE_DEFER.
As this driver is quite different from the most hardware IOMMU
implementations and only needed in Xen guests, place it in drivers/xen
directory. The subsequent commit will make use of it.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/1654197833-25362-7-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
The main purpose of this binding is to communicate Xen specific
information using generic IOMMU device tree bindings (which is
a good fit here) rather than introducing a custom property.
Introduce Xen specific IOMMU for the virtualized device (e.g. virtio)
to be used by Xen grant DMA-mapping layer in the subsequent commit.
The reference to Xen specific IOMMU node using "iommus" property
indicates that Xen grant mappings need to be enabled for the device,
and it specifies the ID of the domain where the corresponding backend
resides. The domid (domain ID) is used as an argument to the Xen grant
mapping APIs.
This is needed for the option to restrict memory access using Xen grant
mappings to work which primary goal is to enable using virtio devices
in Xen guests.
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1654197833-25362-6-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
In order to support virtio in Xen guests add a config option XEN_VIRTIO
enabling the user to specify whether in all Xen guests virtio should
be able to access memory via Xen grant mappings only on the host side.
Also set PLATFORM_VIRTIO_RESTRICTED_MEM_ACCESS feature from the guest
initialization code on Arm and x86 if CONFIG_XEN_VIRTIO is enabled.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/1654197833-25362-5-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
On htc_tx_completion error the skb is not dropped. This is wrong since
the completion_handler logic expect the skb to be consumed anyway even
when an error is triggered. Not freeing the skb on error is a memory
leak since the skb won't be freed anywere else. Correctly free the
packet on eid >= ATH11K_HTC_EP_COUNT before returning.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
Fixes: f951380a60 ("ath11k: Disabling credit flow for WMI path")
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220528142516.20819-2-ansuelsmth@gmail.com
My Bootlin address is preferred from now on.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220603155727.1232061-2-luca@lucaceresoli.net
Two old boards use "atheros" prefix instead of already documented "qca".
Document it as deprecated to fix warnings like:
at91-gatwick.dtb: atheros@0: 'atheros,board-id' does not match any of the regexes
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220601135222.205035-1-krzysztof.kozlowski@linaro.org
spi-max-frequency property is supposed to be a per SPI peripheral device
property, not a SPI controller property, so remove it.
Reported-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/lkml/20220526014141.2872567-1-robh@kernel.org/
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Because mt8195 vdosys0 has 2 DITHER components,
so the suffix 0 need to be added to DDP_COMPONENT_DITHER.
Then DITHER enum will become:
DDP_COMPONENT_DITHER0 and DDP_COMPONENT_DITHER1.
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220526102126.19756-5-jason-jh.lin@mediatek.com/
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
1. Add driver data of mt8195 vdosys0 to mediatek-drm and the sub driver.
2. Add get driver data function to identify which vdosys by io_start.
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220526102126.19756-4-jason-jh.lin@mediatek.com/
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
DSC is designed for real-time systems with real-time compression,
transmission, decompression and display.
The DSC standard is a specification of the algorithms used for
compressing and decompressing image display streams, including
the specification of the syntax and semantics of the compressed
video bit stream.
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220526102126.19756-2-jason-jh.lin@mediatek.com/
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
With unevaluatedProperties issues fixed, 'nand-bus-width' and
'nand-ecc-mode' are flagged as undocumented. Removing them from the example
is the easiest solution to silence the warnings.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220525205947.2487165-1-robh@kernel.org
When meson_nfc_nand_chip_cleanup() is called, it will call:
meson_nfc_free_buffer(&meson_chip->nand);
nand_cleanup(&meson_chip->nand);
nand_cleanup() in turn will call nand_detach() which calls the
.detach_chip() which is here meson_nand_detach_chip().
meson_nand_detach_chip() already calls meson_nfc_free_buffer(), so we
could double free some memory.
Fix it by removing the unneeded explicit call to meson_nfc_free_buffer().
Fixes: 8fae856c53 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Liang Yang <liang.yang@amlogic.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/ec15c358b8063f7c50ff4cd628cf0d2e14e43f49.1653064877.git.christophe.jaillet@wanadoo.fr
Driver should call pci_disable_device() if it returns from
cafe_nand_probe() with error.
Meanwhile, the driver calls pci_enable_device() in
cafe_nand_probe(), but never calls pci_disable_device()
during removal.
Signed-off-by: Peng Wu <wupeng58@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220520084425.116686-1-wupeng58@huawei.com
of_find_matching_node() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: b0afd44bc1 ("mtd: physmap_of: add a hook for Versatile write protection")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220523143255.4376-1-linmq006@gmail.com
of_find_matching_node_and_match() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: b0afd44bc1 ("mtd: physmap_of: add a hook for Versatile write protection")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220523140205.48625-1-linmq006@gmail.com
As part of moving to remove the old style defines for the bus clocks update
the tlv320dac3x driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602135316.3554400-21-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the tlv320aic33 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602135316.3554400-20-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the tlv320aic32x4 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602135316.3554400-19-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the tlv320aic31xx driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602135316.3554400-18-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the tlv320aic26 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220602135316.3554400-17-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the tlv320aic23 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220602135316.3554400-16-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the tlv320adcx140 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602135316.3554400-15-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the tlv320aic3xxx driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602135316.3554400-14-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the uda1334 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602135316.3554400-13-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the tas6424 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602135316.3554400-12-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the tas5720 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602135316.3554400-11-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the tas5086 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602135316.3554400-10-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the tas2770 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602135316.3554400-9-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the tas2552 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602135316.3554400-8-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the sti-sas driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602135316.3554400-7-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the sta350 driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602135316.3554400-6-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of moving to remove the old style defines for the bus clocks update
the sta32x driver to use more modern terminology for clocking.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602135316.3554400-5-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
