Possible page table entries (or pointers) on non-zero page table levels are
dependent on a single page size i.e PAGE_SIZE and size required for each
individual page table entry i.e 8 bytes. PTRS_PER_[PMD|PUD] as such are not
related to PTRS_PER_PTE in any manner, as being implied currently. So lets
just make this very explicit and compute these macros independently.
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220408041009.1259701-1-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Couple of patches fixing the hibernation issue seen on MHI endpoint devices like
SDX65 modems:
- During hibernation, the host puts the device into D3cold after thaw() stage.
But at that time, the device would be in M0 state. So the device emits a
warning (not visible to the host but to device firmware only) stating invalid
transition. This is fixed by adding a poweroff() callback that puts the device
into M3 before D3cold.
- There is a possibility that the recovery worker might be running while trying
to powerdown the device. So flush the recovery worker before that.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAmJWjlgACgkQVZ8R5v6R
zvVCBAf+IbM923JOgGtevCqvStFSEBsHUqr8XZSAhNLD6MdeITlNGbkd3Esf/Tl7
09+mn6mXX5Y0vKKyXqO9g52MBaiaVeTKdoqreYQjAVQVxFAFX1n3+WF/oh7E915Q
WnTYmJ/XEcM+v1XZNWlrmc9pzbvLzr7c+1aWav7/cn90MXDa1uTIudX1Unjzt9E0
SWmyVgIFgLDU7oNznp1O7G9kpimu9IAntZOtkUl/r6c66bR4nrb3X6w1yicp7mvj
wLamYc8iaHohxpfCApKo+yXuvAKdib98W71a39UdbJ32fj9duORMGjC4pnckL+dx
JmGQ3nENuSdJcZjNCudlOH3G6a156g==
=9xW7
-----END PGP SIGNATURE-----
Merge tag 'mhi-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-linus
Manivannan writes:
MHI fixes for v5.18
Couple of patches fixing the hibernation issue seen on MHI endpoint devices like
SDX65 modems:
- During hibernation, the host puts the device into D3cold after thaw() stage.
But at that time, the device would be in M0 state. So the device emits a
warning (not visible to the host but to device firmware only) stating invalid
transition. This is fixed by adding a poweroff() callback that puts the device
into M3 before D3cold.
- There is a possibility that the recovery worker might be running while trying
to powerdown the device. So flush the recovery worker before that.
* tag 'mhi-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: pci_generic: Flush recovery worker during freeze
bus: mhi: host: pci_generic: Add missing poweroff() PM callback
Make sure not to set run_stop bit or link state change request while
initiating soft-reset. Register read-modify-write operation may
unintentionally start the controller before the initialization completes
with its previous DCTL value, which can cause initialization failure.
Fixes: f59dcab176 ("usb: dwc3: core: improve reset sequence")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/6aecbd78328f102003d40ccf18ceeebd411d3703.1650594792.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch converts the existing mediatek-net.txt binding file
in yaml format.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mmsys routing table of mt8195 vdosys0 has 2 DITHER components,
so mmsys need to add DDP_COMPONENT_DITHER1 and change all usages of
DITHER enum form DDP_COMPONENT_DITHER to DDP_COMPONENT_DITHER0.
But its header need to keep DDP_COMPONENT_DITHER enum
until drm/mediatek also changed it.
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220419094143.9561-7-jason-jh.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
1. Add mt8195 mmsys compatible for 2 vdosys.
2. Add io_start into each driver data of mt8195 vdosys.
3. Add get match data function to identify mmsys by io_start.
4. Add mt8195 routing table settings of vdosys0.
Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://lore.kernel.org/r/20220419094143.9561-2-jason-jh.lin@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
of_node_put() will check for NULL value.
Fixes: a20f997010 ("net: dsa: Don't instantiate phylink for CPU/DSA ports unless needed")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault says:
====================
ipv4: First steps toward removing RTO_ONLINK
RTO_ONLINK is a flag that allows to reduce the scope of route lookups.
It's stored in a normally unused bit of the ->flowi4_tos field, in
struct flowi4. However it has several problems:
* This bit is also used by ECN. Although ECN bits are supposed to be
cleared before doing a route lookup, it happened that some code
paths didn't properly sanitise their ->flowi4_tos. So this mechanism
is fragile and we had bugs in the past where ECN bits slipped in and
could end up being erroneously interpreted as RTO_ONLINK.
* A dscp_t type was recently introduced to ensure ECN bits are cleared
during route lookups. ->flowi4_tos is the most important structure
field to convert, but RTO_ONLINK prevents such conversion, as dscp_t
mandates that ECN bits (where RTO_ONLINK is stored) be zero.
Therefore we need to stop using RTO_ONLINK altogether. Fortunately
RTO_ONLINK isn't a necessity. Instead of passing a flag in ->flowi4_tos
to tell the route lookup function to restrict the scope, we can simply
initialise the scope correctly.
Patch 1 does some preparatory work: it stops resetting ->flowi4_scope
automatically before a route lookup, thus allowing callers to set their
desired scope without having to rely on the RTO_ONLINK flag.
Patch 2-3 convert a few code paths to avoid relying on RTO_ONLINK.
More conversions will have to take place before we can eventually
remove this flag.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
All the *_redirect() and *_update_pmtu() functions initialise their
struct flowi4 variable with either __build_flow_key() or
build_sk_flow_key(). When sk is provided, these functions use
RT_CONN_FLAGS() to set ->flowi4_tos and always use RT_SCOPE_UNIVERSE
for ->flowi4_scope. Then they rely on ip_rt_fix_tos() to adjust the
scope based on the RTO_ONLINK bit and to mask the tos with
IPTOS_RT_MASK.
This patch modifies __build_flow_key() and build_sk_flow_key() to
properly initialise ->flowi4_tos and ->flowi4_scope, so that the
ICMP redirects and PMTU handlers don't need an extra call to
ip_rt_fix_tos() before doing a fib lookup. That is, we:
* Drop RT_CONN_FLAGS(): use ip_sock_rt_tos() and ip_sock_rt_scope()
instead, so that we don't have to rely on ip_rt_fix_tos() to adjust
the scope anymore.
* Apply IPTOS_RT_MASK to the tos, so that we don't need
ip_rt_fix_tos() to do it for us.
* Drop the ip_rt_fix_tos() calls that now become useless.
The only remaining ip_rt_fix_tos() caller is ip_route_output_key_hash()
which needs it as long as external callers still use the RTO_ONLINK
flag.
Note:
This patch also drops some useless RT_TOS() calls as IPTOS_RT_MASK is
a stronger mask.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that ip_rt_fix_tos() doesn't reset ->flowi4_scope unconditionally,
we don't have to rely on the RTO_ONLINK bit to properly set the scope
of a flowi4 structure. We can just set ->flowi4_scope explicitly and
avoid using RTO_ONLINK in ->flowi4_tos.
This patch converts callers of ip_route_connect(). Instead of setting
the tos parameter with RT_CONN_FLAGS(sk), as all callers do, we can:
1- Drop the tos parameter from ip_route_connect(): its value was
entirely based on sk, which is also passed as parameter.
2- Set ->flowi4_scope depending on the SOCK_LOCALROUTE socket option
instead of always initialising it with RT_SCOPE_UNIVERSE (let's
define ip_sock_rt_scope() for this purpose).
3- Avoid overloading ->flowi4_tos with RTO_ONLINK: since the scope is
now properly initialised, we don't need to tell ip_rt_fix_tos() to
adjust ->flowi4_scope for us. So let's define ip_sock_rt_tos(),
which is the same as RT_CONN_FLAGS() but without the RTO_ONLINK
bit overload.
Note:
In the original ip_route_connect() code, __ip_route_output_key()
might clear the RTO_ONLINK bit of fl4->flowi4_tos (because of
ip_rt_fix_tos()). Therefore flowi4_update_output() had to reuse the
original tos variable. Now that we don't set RTO_ONLINK any more,
this is not a problem and we can use fl4->flowi4_tos in
flowi4_update_output().
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
All callers already initialise ->flowi4_scope with RT_SCOPE_UNIVERSE,
either by manual field assignment, memset(0) of the whole structure or
implicit structure initialisation of on-stack variables
(RT_SCOPE_UNIVERSE actually equals 0).
Therefore, we don't need to always initialise ->flowi4_scope in
ip_rt_fix_tos(). We only need to reduce the scope to RT_SCOPE_LINK when
the special RTO_ONLINK flag is present in the tos.
This will allow some code simplification, like removing
ip_rt_fix_tos(). Also, the long term idea is to remove RTO_ONLINK
entirely by properly initialising ->flowi4_scope, instead of
overloading ->flowi4_tos with a special flag. Eventually, this will
allow to convert ->flowi4_tos to dscp_t.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Learning about the DRM subsystem could be quite overwhelming for newcomers
but there are lots of useful talks, slides and articles available that can
help to understand the needed concepts and ease the learning curve.
There are also simple DRM drivers that can be used as example about how a
DRM driver should look like.
Add sections to the introduction page, that contains references to these.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220420072411.15104-1-javierm@redhat.com
Radhey Shyam Pandey says:
====================
net: macb: Make ZynqMP SGMII phy configuration optional
This patchset drop phy-names property from MACB node and also make
SGMII Phy configuration optional. The motivation for this change
is to support traditional usescase in which first stage bootloader
does PS-GT configuration, and should still be supported in macb
driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In the macb binding documentation "phys" is an optional property. Make
implementation in line with it. This change allows the traditional flow
in which first stage bootloader does PS-GT configuration to work along
with newer use cases in which PS-GT configuration is managed by the
phy-zynqmp driver.
It fixes below macb probe failure when macb DT node doesn't have SGMII
phys handle.
"macb ff0b0000.ethernet: error -ENODEV: failed to get PS-GTR PHY"
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In zynqmp SGMII initialization, there is a single PHY so remove phy-names
property as there is no real need of having it.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kuniyuki Iwashima says:
====================
ipv6: Use ipv6_only_sock helper function.
The first patch removes __ipv6_only_sock(), and the second replaces
ipv6only tests with ipv6_only_sock().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch replaces some sk_ipv6only tests with ipv6_only_sock().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 9fe516ba3f ("inet: move ipv6only in sock_common"),
ipv6_only_sock() and __ipv6_only_sock() are the same macro. Let's
remove the one.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Smatch reports this issue
sr9800.h:166:53: warning: symbol 'SR9800_BULKIN_SIZE' was not declared. Should it be static?
Global variables should not be defined in header files.
This only works because sr9800.h in only included by sr9800.c
Change the storage-class specifier to static.
And since it does not change add type qualifier const.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the device is already in a runtime PM enabled state
pm_runtime_get_sync() will return 1, so a test for negative
value should be used to check for errors.
Fixes: deba25800a ("spi: Add driver for IMG SPFI controller")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20220422062641.10486-1-zhengyongjun3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to assign spcm to NULL. Removing this assignment also
removes a false alarm reported by cppcheck.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220421162600.302230-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add PCI DID for Intel Raptor Lake P.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421163358.319489-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add PCI DID for Intel Alder Lake PS.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Muralidhar Reddy <muralidhar.reddy@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220421163358.319489-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a kernel module parameter for select the non-default IPC type.
This should only be used by developers with access to firmware and
topology files, typically Intel and partners.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220421163358.319489-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As suggested by MrChromebox, the SOF driver can be used with the SOF
firmware binary signed with the production key. This patch adds an
additional check for the ApolloLake SoC before modifying the default
firmware path.
Note that ApolloLake Chromebooks officially ship with the Skylake
driver, so to use SOF the users have to explicitly opt-in with
'options intel-dspcfg dsp_driver=3'. There is no plan to change the
default selection.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220421163358.319489-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The '--lto' option is a confusing way of telling objtool to do stack
validation despite it being a linked object. It's no longer needed now
that an explicit '--stackval' option exists. The '--vmlinux' option is
also redundant.
Remove both options in favor of a straightforward '--link' option which
identifies a linked object.
Also, implicitly set '--link' with a warning if the user forgets to do
so and we can tell that it's a linked object. This makes it easier for
manual vmlinux runs.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/dcd3ceffd15a54822c6183e5766d21ad06082b45.1650300597.git.jpoimboe@redhat.com
CONFIG_VMLINUX_VALIDATION is just the validation of the "noinstr" rules.
That name is a misnomer, because now objtool actually does vmlinux
validation for other reasons.
Rename CONFIG_VMLINUX_VALIDATION to CONFIG_NOINSTR_VALIDATION.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/173f07e2d6d1afc0874aed975a61783207c6a531.1650300597.git.jpoimboe@redhat.com
Objtool has some hacks in place to workaround toolchain limitations
which otherwise would break no-instrumentation rules. Make the hacks
explicit (and optional for other arches) by turning it into a cmdline
option and kernel config option.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/b326eeb9c33231b9dfbb925f194ed7ee40edcd7c.1650300597.git.jpoimboe@redhat.com
Objtool secretly does a jump label hack to overcome the limitations of
the toolchain. Make the hack explicit (and optional for other arches)
by turning it into a cmdline option and kernel config option.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/3bdcbfdd27ecb01ddec13c04bdf756a583b13d24.1650300597.git.jpoimboe@redhat.com
Now that CONFIG_STACK_VALIDATION is frame-pointer specific, do the same
for the '--stackval' option. Now the '--no-fp' option is redundant and
can be removed.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/f563fa064b3b63d528de250c72012d49e14742a3.1650300597.git.jpoimboe@redhat.com
Now that stack validation is an optional feature of objtool, add
CONFIG_OBJTOOL and replace most usages of CONFIG_STACK_VALIDATION with
it.
CONFIG_STACK_VALIDATION can now be considered to be frame-pointer
specific. CONFIG_UNWINDER_ORC is already inherently valid for live
patching, so no need to "validate" it.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/939bf3d85604b2a126412bf11af6e3bd3b872bcb.1650300597.git.jpoimboe@redhat.com
Extricate ibt from validate_branch() so they can be executed (or ported)
independently from each other.
While shuffling code around, simplify and improve the ibt logic:
- Ignore an explicit list of known sections which reference functions
for reasons other than indirect branching to them. This helps prevent
unnnecesary sealing.
- Warn on missing !ENDBR for all other sections, not just .data and
.rodata. This finds additional warnings, because there are sections
other than .[ro]data which reference function pointers. For example,
the ksymtab sections which are used for exporting symbols.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/fd1435e46bb95f81031b8fb1fa360f5f787e4316.1650300597.git.jpoimboe@redhat.com
To help prevent objtool users from having to do math to convert function
addresses to section addresses, and to help out with finding data
addresses reported by IBT validation, add an option to print the section
address in addition to the function address.
Normal:
vmlinux.o: warning: objtool: fixup_exception()+0x2d1: unreachable instruction
With '--sec-address':
vmlinux.o: warning: objtool: fixup_exception()+0x2d1 (.text+0x76c51): unreachable instruction
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/2cea4d5299d53d1a4c09212a6ad7820aa46fda7a.1650300597.git.jpoimboe@redhat.com
The parentheses in the "func()+off" address output are inconsistent with
how the kernel prints function addresses, breaking Peter's scripts.
Remove them.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/f2bec70312f62ef4f1ea21c134d9def627182ad3.1650300597.git.jpoimboe@redhat.com
Objtool has a fairly singular focus. It runs on object files and does
validations and transformations which can be combined in various ways.
The subcommand model has never been a good fit, making it awkward to
combine and remove options.
Remove the "check" and "orc" subcommands in favor of a more traditional
cmdline option model. This makes it much more flexible to use, and
easier to port individual features to other arches.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/5c61ebf805e90aefc5fa62bc63468ffae53b9df6.1650300597.git.jpoimboe@redhat.com
Split the existing options into two groups: actions, which actually do
something; and options, which modify the actions in some way.
Also there's no need to have short flags for all the non-action options.
Reserve short flags for the more important actions.
While at it:
- change a few of the short flags to be more intuitive
- make option descriptions more consistently descriptive
- sort options in the source like they are when printed
- move options to a global struct
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/9dcaa752f83aca24b1b21f0b0eeb28a0c181c0b0.1650300597.git.jpoimboe@redhat.com
The OPTION_GROUP option type is a way of grouping certain options
together in the printed usage text. It happens to be completely broken,
thanks to the fact that the subcmd option sorting just sorts everything,
without regard for grouping. Luckily, nobody uses this option anyway,
though that will change shortly.
Fix it by sorting each group individually.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/e167ea3a11e2a9800eb062c1fd0f13e9cd05140c.1650300597.git.jpoimboe@redhat.com
The pmd_leaf() is used to test a leaf mapped PMD, however, it misses
the PROT_NONE mapped PMD on arm64. Fix it. A real world issue [1]
caused by this was reported by Qian Cai. Also fix pud_leaf().
Link: https://patchwork.kernel.org/comment/24798260/ [1]
Fixes: 8aa82df3c1 ("arm64: mm: add p?d_leaf() definitions")
Reported-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Link: https://lore.kernel.org/r/20220422060033.48711-1-songmuchun@bytedance.com
Signed-off-by: Will Deacon <will@kernel.org>
Tegra194 and Tegra234 SoCs have the erratum that causes walk cache
entries to not be invalidated correctly. The problem is that the walk
cache index generated for IOVA is not same across translation and
invalidation requests. This is leading to page faults when PMD entry is
released during unmap and populated with new PTE table during subsequent
map request. Disabling large page mappings avoids the release of PMD
entry and avoid translations seeing stale PMD entry in walk cache.
Fix this by limiting the page mappings to PAGE_SIZE for Tegra194 and
Tegra234 devices. This is recommended fix from Tegra hardware design
team.
Acked-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Krishna Reddy <vdumpa@nvidia.com>
Co-developed-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Pritesh Raithatha <praithatha@nvidia.com>
Signed-off-by: Ashish Mhetre <amhetre@nvidia.com>
Link: https://lore.kernel.org/r/20220421081504.24678-1-amhetre@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
