The callback .set_channel cannot be used to enable and
disable multiple channels at once as they are presented
in the active_scan_mask.
By adding an update_scan_mode callback, every time the
continuous mode is activated, channels will be
enabled/disabled accordingly.
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20220322105029.86389-3-alexandru.tachici@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The 24 bits data is stored in 32 bits in BE. There
is no need to shift it. This confuses user-space apps.
Fixes: b3af341bbd ("iio: adc: Add ad7124 support")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20220322105029.86389-2-alexandru.tachici@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The difference between the ICM-20608-D and the other ICM-20608
variants is the addition of a DMP (Digital Motion Processor) core.
This difference is deemed substantial enough to change the WHOAMI
register value.
Since this driver doesn't currently acknowledge the exisence of
something like a DMP core, simply copy ICM-20608 except for the
aforementioned WHOAMI register.
Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20220323121550.16096-3-michael.srba@seznam.cz
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ICM-20608-D differs from the other ICM-20608 variants by having
a DMP (Digital Motion Processor) core tacked on.
Despite having a different WHOAMI register, this variant is
completely interchangeable with the other ICM-20608 variants
by simply pretending the DMP core doesn't exist.
Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20220323121550.16096-2-michael.srba@seznam.cz
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
The conversion slightly changes the logic behind property reading for
the configuration values. Original code allocates just as much memory
as needed. Then for each separate 32- or 64-bit value it reads it from
the property and converts to a raw one which will be fed to the sensor.
In the new code we allocate the amount of memory needed to retrieve all
values at once from the property and then convert them as required.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Tested-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220307203606.87258-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There are several, possibly copied'n'pasted, places in the functions,
where OF node is put and error returned directly, while the common
exit point exists. Unify all these cases to use a single error path.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220307203606.87258-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In a couple of messages the constants, which have their definitions,
are hard coded into the message text. Unhardcode them.
While at it, add a trailing \n where it's currently missing.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220307203606.87258-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
kstrdup() is also a memory allocation-related function, it returns NULL
when some memory errors happen. So it is better to check the return
value of it so to catch the memory error in time. Besides, there should
have a kfree() to clear up the allocation if we get a failure later in
this function to prevent memory leak.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_C920CFCC33B9CC1C63141FE1334A39FF8508@qq.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Peter Rosin <peda@axentia.se>
Link: https://lore.kernel.org/r/20220302160025.54348-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The st_accel_type enum is not used anywhere else in the code, and can be
removed
Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220307132502.73854-3-absicsz@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The NanoPi4 boards have the RK808's always-on 32KHz clock wired to the
SoC, so have it claim the relevant pinctrl to actually enable the
CLK32K_IN input. The RK808's SLEEP pin is also wired to the SoC's
AP_PWROFF output, so we may as well claim that too.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/e870284a872567f163868b77267c01b77ed6f22a.1647381986.git.robin.murphy@arm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
RK356x supports up to 3 sata controllers which were compatible with the
existing snps,dwc-ahci binding.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20220311210357.222830-7-linux@fw-web.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Fix the dts to match board's reference design:
- update the maximum SDIO frequency to match 3.3v regulator (Wi-Fi SDIO module)
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220326075110.1462301-5-adeep@lexina.in
Fix the dts to match board's reference design:
- update vddio_boot regulator to 3.3v (Wi-Fi SDIO module)
- add vccq_1v8 regulator with 1.8v for eMMC SDIO
In the first revision of JetHub D1 the vccq_1v8 regulator was 3.3v.
All installed eMMC modules were tested to work in HS200 mode at 3.3v
supply voltage. In the next revisions of the board eMMC will be
powered with 1.8v according to the standard.
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220326075110.1462301-4-adeep@lexina.in
Change zigbee serial port alias to ttyAML2 for backward compatibility.
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220326075110.1462301-3-adeep@lexina.in
Add bluetooth node for RTL8822CS uart to JetHub H1 dts file.
Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220326075110.1462301-2-adeep@lexina.in
The node names should be generic, so fix this for the rk3036 and
rk322x dma node and rename it to "dma-controller".
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220331125644.6841-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Without active_discharge_on setting, the SWITCH1 discharge enable control
is always disabled. Fix it.
Fixes: 3b15ccac16 ("regulator: Add regulator driver for ATC260x PMICs")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20220403132235.123727-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
Correct the interrupt flags without affecting the code:
ACTIVE_HIGH => IRQ_TYPE_NONE
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200917185211.5483-1-krzk@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Amlogic SM1 devices experience CPU stalls and random board wedges when
the system idles and CPU cores clock down to lower opp points. Recent
vendor kernels include a change to remove 100-250MHz and other distro
sources also remove the 500/667MHz points. Unless all 100-667Mhz opps
are removed or the CPU governor forced to performance stalls are still
observed, so let's remove them to improve stability and uptime.
Fixes: 3d9e764830 ("arm64: dts: meson-sm1-sei610: enable DVFS")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220210100638.19130-3-christianshewitt@gmail.com
Amlogic G12B devices experience CPU stalls and random board wedges when
the system idles and CPU cores clock down to lower opp points. Recent
vendor kernels include a change to remove 100-250MHz and other distro
sources also remove the 500/667MHz points. Unless all 100-667Mhz opps
are removed or the CPU governor forced to performance stalls are still
observed, so let's remove them to improve stability and uptime.
Fixes: b96d4e9270 ("arm64: dts: meson-g12b: support a311d and s922x cpu operating points")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220210100638.19130-2-christianshewitt@gmail.com
While we currently assume that regulators with no control available are
just uncontionally enabled this isn't always as clearly displayed to
users as is desirable, for example the code for disabling unused
regulators will log that it is about to disable them. Clean this up a
bit by setting always_on during constraint evaluation if we have no
available mechanism for controlling the regualtor so things that check
the constraint will do the right thing.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220325144637.1543496-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
this patch support hclk for AHB bus.
Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220321013922.24067-3-leilk.liu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
this patch adds hclk support.
Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220321013922.24067-4-leilk.liu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
this patch add the support of spi-mem for ipm design.
Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220321013922.24067-2-leilk.liu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct grammar in 'enable-gpios' description and remove useless comment
about regulator nodes, because these are obvious from patternProperties.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220401153711.1057853-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If spi_register_master() fails, we must undo a previous
mxic_spi_mem_ecc_probe() call, as already done in the remove function.
Fixes: 00360ebae4 ("spi: mxic: Add support for pipelined ECC operations")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/09c81f751241f6ec0bac7a48d4ec814a742e0d17.1648980664.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
Add buck_vcore_sshub and ldo_vsram_others_sshub
regulators to binding document for MT6358 and MT6366.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220317030402.24894-3-johnson.wang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MT6366 is a regulator found on boards based on MediaTek MT8186 and
probably other SoCs. It is a so called pmic and connects as a slave to
SoC using SPI, wrapped inside the pmic-wrapper.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220317030402.24894-2-johnson.wang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The only usage of these is to pass their address to __regmap_init() or
__devm_regmap_init(), both which takes pointers to const struct
regmap_bus. Make them const to allow the compiler to put them in
read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20220330214110.36337-1-rikard.falkeborn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds compatible string "mediatek,mt8195-mt6359-max98390-rt5682"
to support mt8195 board with mt6359, max98390 and rt5682.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220324053851.27350-7-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for mt8195 board with mt6359, max98390 and
rt5682.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220324053851.27350-6-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to be able to reuse the same configurations in user space,
rename the controls to generic names.
"Headphone Jack" -> "Headphone"
"Speakers" -> "Ext Spk"
"Left Speaker" -> "Left Spk"
"Right Speaker" -> "Right SPk"
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220324053851.27350-5-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because the same binding components can be shared by all codecs
combinations, we only reserve one binding file for mt8195 machine driver
and rename to a generic name.
We use compatible string to separate different codec combination instead
of creating a new binding file for new codec combination.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220324053851.27350-4-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because most functions can be reused in different codec combinations,
mt8195 machine drivers are combined to one common file.
The model and compatible string are used to decide which codecs are
being used.
As a result, We can prevent from copy-paste functions when new codec
combination is introduced.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220324053851.27350-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Revise driver for the coming driver combination.
There are two major parts including in the patch.
1. Apply some suggested changes used in mt8195-mt6359-rt1011-rt5682.c.
2. Reorder the layout for centralizing the codec related code.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220324053851.27350-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The WM8731 driver has been refactored so the I2C and SPI bus code is
separate modules. Refresh multi_v5_defconfig to reflect this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: soc@kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220325153121.1598494-8-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the WM8731 DT bindings to YAML format, including addition of
documentation for the regulator and clock bindings which the driver has
had for some time but which were not covered in the bindings document.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220325153121.1598494-7-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
