This patch add sysctl interface to support container environment
for SMC as we talk in the mail list.
Link: https://lore.kernel.org/netdev/20220224020253.GF5443@linux.alibaba.com
Co-developed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
WARN and bail if is_unsync_root() is passed a root for which there is no
shadow page, i.e. is passed the physical address of one of the special
roots, which do not have an associated shadow page. The current usage
squeaks by without bug reports because neither kvm_mmu_sync_roots() nor
kvm_mmu_sync_prev_roots() calls the helper with pae_root or pml4_root,
and 5-level AMD CPUs are not generally available, i.e. no one can coerce
KVM into calling is_unsync_root() on pml5_root.
Note, this doesn't fix the mess with 5-level nNPT, it just (hopefully)
prevents KVM from crashing.
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220225182248.3812651-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the now unused KVM_REQ_MMU_RELOAD, shift KVM_REQ_VM_DEAD into the
unoccupied space, and update vcpu-requests.rst, which was missing an
entry for KVM_REQ_VM_DEAD. Switching KVM_REQ_VM_DEAD to entry '1' also
fixes the stale comment about bits 4-7 being reserved.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220225182248.3812651-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an arch request, KVM_REQ_REFRESH_GUEST_PREFIX, to deal with guest
prefix changes instead of piggybacking KVM_REQ_MMU_RELOAD. This will
allow for the removal of the generic KVM_REQ_MMU_RELOAD, which isn't
actually used by generic KVM.
No functional change intended.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220225182248.3812651-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Zap only obsolete roots when responding to zapping a single root shadow
page. Because KVM keeps root_count elevated when stuffing a previous
root into its PGD cache, shadowing a 64-bit guest means that zapping any
root causes all vCPUs to reload all roots, even if their current root is
not affected by the zap.
For many kernels, zapping a single root is a frequent operation, e.g. in
Linux it happens whenever an mm is dropped, e.g. process exits, etc...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220225182248.3812651-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the generic kvm_reload_remote_mmus() and open code its
functionality into the two x86 callers. x86 is (obviously) the only
architecture that uses the hook, and is also the only architecture that
uses KVM_REQ_MMU_RELOAD in a way that's consistent with the name. That
will change in a future patch, as x86's usage when zapping a single
shadow page x86 doesn't actually _need_ to reload all vCPUs' MMUs, only
MMUs whose root is being zapped actually need to be reloaded.
s390 also uses KVM_REQ_MMU_RELOAD, but for a slightly different purpose.
Drop the generic code in anticipation of implementing s390 and x86 arch
specific requests, which will allow dropping KVM_REQ_MMU_RELOAD entirely.
Opportunistically reword the x86 TDP MMU comment to avoid making
references to functions (and requests!) when possible, and to remove the
rather ambiguous "this".
No functional change intended.
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220225182248.3812651-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a KVM_REQ_MMU_RELOAD request with a direct kvm_mmu_unload() call
when the guest's CR4.PCIDE changes. This will allow tweaking the logic
of KVM_REQ_MMU_RELOAD to free only obsolete/invalid roots, which is the
historical intent of KVM_REQ_MMU_RELOAD. The recent PCIDE behavior is
the only user of KVM_REQ_MMU_RELOAD that doesn't mark affected roots as
obsolete, needs to unconditionally unload the entire MMU, _and_ affects
only the current vCPU.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220225182248.3812651-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Document RZ/V2L SDHI bindings. RZ/V2L SDHI is almost identical to one
found on the R-Car Gen3. No driver changes are required as generic
compatible string "renesas,rcar-gen3-sdhi" will be used as a fallback.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220227212330.22262-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Outer-privilege level return is not implemented in emulator,
move the unhandled logic into __load_segment_descriptor to
make it easier to understand why the checks for RET are
incomplete.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <5b7188e6388ac9f4567d14eab32db9adf3e00119.1644292363.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Code segment descriptor can be loaded by jmp/call/ret, iret
and int. The privilege checks are different between those
instructions above realmode. Although, the emulator has
use x86_transfer_type enumerate to differentiate them, but
it is not really used in __load_segment_descriptor(). Note,
far jump/call to call gate, task gate or task state segment
are not implemented in emulator.
As for far jump/call to code segment, if DPL > CPL for conforming
code or (RPL > CPL or DPL != CPL) for non-conforming code, it
should trigger #GP. The current checks are ok.
As for far return, if RPL < CPL or DPL > RPL for conforming
code or DPL != RPL for non-conforming code, it should trigger #GP.
Outer level return is not implemented above virtual-8086 mode in
emulator. So it implies that RPL <= CPL, but the current checks
wouldn't trigger #GP if RPL < CPL.
As for code segment loading in task switch, if DPL > RPL for conforming
code or DPL != RPL for non-conforming code, it should trigger #TS. Since
segment selector is loaded before segment descriptor when load state from
tss, it implies that RPL = CPL, so the current checks are ok.
The only problem in current implementation is missing RPL < CPL check for
far return. However, change code to follow the manual is better.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <e01f5ea70fc1f18f23da1182acdbc5c97c0e5886.1644292363.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Per Intel's SDM on the "Instruction Set Reference", when
loading segment descriptor, not-present segment check should
be after all type and privilege checks. But the emulator checks
it first, then #NP is triggered instead of #GP if privilege fails
and segment is not present. Put not-present segment check after
type and privilege checks in __load_segment_descriptor().
Fixes: 38ba30ba51 (KVM: x86 emulator: Emulate task switch in emulator.c)
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <52573c01d369f506cadcf7233812427cf7db81a7.1644292363.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The main thing that the selftest verifies is that KVM copies x2APIC's
ICR[63:32] to/from ICR2 when userspace accesses the vAPIC page via
KVM_{G,S}ET_LAPIC. KVM previously split x2APIC ICR to ICR+ICR2 at the
time of write (from the guest), and so KVM must preserve that behavior
for backwards compatibility between different versions of KVM.
It will also test other invariants, e.g. that KVM clears the BUSY
flag on ICR writes, that the reserved bits in ICR2 are dropped on writes
from the guest, etc...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hide the lapic's "raw" write helper inside lapic.c to force non-APIC code
to go through proper helpers when modification the vAPIC state. Keep the
read helper visible to outsiders for now, refactoring KVM to hide it too
is possible, it will just take more work to do so.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Emulate the x2APIC ICR as a single 64-bit register, as opposed to forking
it across ICR and ICR2 as two 32-bit registers. This mirrors hardware
behavior for Intel's upcoming IPI virtualization support, which does not
split the access.
Previous versions of Intel's SDM and AMD's APM don't explicitly state
exactly how ICR is reflected in the vAPIC page for x2APIC, KVM just
happened to speculate incorrectly.
Handling the upcoming behavior is necessary in order to maintain
backwards compatibility with KVM_{G,S}ET_LAPIC, e.g. failure to shuffle
the 64-bit ICR to ICR+ICR2 and vice versa would break live migration if
IPI virtualization support isn't symmetrical across the source and dest.
Cc: Zeng Guang <guang.zeng@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add helpers to handle 64-bit APIC read/writes via MSRs to deduplicate the
x2APIC and Hyper-V code needed to service reads/writes to ICR. Future
support for IPI virtualization will add yet another path where KVM must
handle 64-bit APIC MSR reads/write (to ICR).
Opportunistically fix the comment in the write path; ICR2 holds the
destination (if there's no shorthand), not the vector.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make the low level read/write lapic helpers static, any accesses to the
local APIC from vendor code or non-APIC code should be routed through
proper helpers.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN if KVM emulates an IPI without clearing the BUSY flag, failure to do
so could hang the guest if it waits for the IPI be sent.
Opportunistically use APIC_ICR_BUSY macro instead of open coding the
magic number, and add a comment to clarify why kvm_recalculate_apic_map()
is unconditionally invoked (it's really, really confusing for IPIs due to
the existence of fast paths that don't trigger a potential recalc).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't bother rewriting the ICR value into the vAPIC page on an AVIC IPI
virtualization failure, the access is a trap, i.e. the value has already
been written to the vAPIC page. The one caveat is if hardware left the
BUSY flag set (which appears to happen somewhat arbitrarily), in which
case go through the "nodecode" APIC-write path in order to clear the BUSY
flag.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the common kvm_apic_write_nodecode() to handle AVIC/APIC-write traps
instead of open coding the same exact code. This will allow making the
low level lapic helpers inaccessible outside of lapic.c code.
Opportunistically clean up the params to eliminate a bunch of svm=>vcpu
reflection.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the "raw" helper to read the vAPIC register after an APIC-write trap
VM-Exit. Hardware is responsible for vetting the write, and the caller
is responsible for sanitizing the offset. This is a functional change,
as it means KVM will consume whatever happens to be in the vAPIC page if
the write was dropped by hardware. But, unless userspace deliberately
wrote garbage into the vAPIC page via KVM_SET_LAPIC, the value should be
zero since it's not writable by the guest.
This aligns common x86 with SVM's AVIC logic, i.e. paves the way for
using the nodecode path to handle APIC-write traps when AVIC is enabled.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the vAPIC offset adjustments done in the APIC-write trap path from
common x86 to VMX in anticipation of using the nodecode path for SVM's
AVIC. The adjustment reflects hardware behavior, i.e. it's technically a
property of VMX, no common x86. SVM's AVIC behavior is identical, so
it's a bit of a moot point, the goal is purely to make it easier to
understand why the adjustment is ok.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220204214205.3306634-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Emulating writes to SELF_IPI with a write to ICR has an unwanted side effect:
the value of ICR in vAPIC page gets changed. The lists SELF_IPI as write-only,
with no associated MMIO offset, so any write should have no visible side
effect in the vAPIC page.
Reported-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In emulation of writing to cr8, one of the lowest four bits in TPR[3:0]
is kept.
According to Intel SDM 10.8.6.1(baremetal scenario):
"APIC.TPR[bits 7:4] = CR8[bits 3:0], APIC.TPR[bits 3:0] = 0";
and SDM 28.3(use TPR shadow):
"MOV to CR8. The instruction stores bits 3:0 of its source operand into
bits 7:4 of VTPR; the remainder of VTPR (bits 3:0 and bits 31:8) are
cleared.";
and AMD's APM 16.6.4:
"Task Priority Sub-class (TPS)-Bits 3 : 0. The TPS field indicates the
current sub-priority to be used when arbitrating lowest-priority messages.
This field is written with zero when TPR is written using the architectural
CR8 register.";
so in KVM emulated scenario, clear TPR[3:0] to make a consistent behavior
as in other scenarios.
This doesn't impact evaluation and delivery of pending virtual interrupts
because processor does not use the processor-priority sub-class to
determine which interrupts to delivery and which to inhibit.
Sub-class is used by hardware to arbitrate lowest priority interrupts,
but KVM just does a round-robin style delivery.
Fixes: b93463aa59 ("KVM: Accelerated apic support")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220210094506.20181-1-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For both CR0 and CR4, disassociate the TLB flush logic from the
MMU role logic. Instead of relying on kvm_mmu_reset_context() being
a superset of various TLB flushes (which is not necessarily going to
be the case in the future), always call it if the role changes
but also set the various TLB flush requests according to what is
in the manual.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The function "drm_of_find_panel_or_bridge" has been deprecated in
favor of "devm_drm_of_get_bridge".
Switch to the new function and reduce boilerplate.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221074224.12920-1-jose.exposito89@gmail.com
Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian
2.37.90.20220207) the following build error shows up:
{standard input}: Assembler messages:
{standard input}:10576: Error: unrecognized opcode: `stbcx.'
{standard input}:10680: Error: unrecognized opcode: `lharx'
{standard input}:10694: Error: unrecognized opcode: `lbarx'
Rework to add assembler directives [1] around the instruction. The
problem with this might be that we can trick a power6 into
single-stepping through an stbcx. for instance, and it will execute that
in kernel mode.
[1] https://sourceware.org/binutils/docs/as/PowerPC_002dPseudo.html#PowerPC_002dPseudo
Fixes: 350779a29f ("powerpc: Handle most loads and stores in instruction emulation code")
Cc: stable@vger.kernel.org # v4.14+
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220224162215.3406642-3-anders.roxell@linaro.org
Building tinyconfig with gcc (Debian 11.2.0-16) and assembler (Debian
2.37.90.20220207) the following build error shows up:
{standard input}: Assembler messages:
{standard input}:1190: Error: unrecognized opcode: `stbcix'
{standard input}:1433: Error: unrecognized opcode: `lwzcix'
{standard input}:1453: Error: unrecognized opcode: `stbcix'
{standard input}:1460: Error: unrecognized opcode: `stwcix'
{standard input}:1596: Error: unrecognized opcode: `stbcix'
...
Rework to add assembler directives [1] around the instruction. Going
through them one by one shows that the changes should be safe. Like
__get_user_atomic_128_aligned() is only called in p9_hmi_special_emu(),
which according to the name is specific to power9. And __raw_rm_read*()
are only called in things that are powernv or book3s_hv specific.
[1] https://sourceware.org/binutils/docs/as/PowerPC_002dPseudo.html#PowerPC_002dPseudo
Cc: stable@vger.kernel.org
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
[mpe: Make commit subject more descriptive]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220224162215.3406642-2-anders.roxell@linaro.org
Looks like there been a copy paste mistake when added the instruction
'stbcx' twice and one was probably meant to be 'sthcx'. Changing to
'sthcx' from 'stbcx'.
Fixes: 350779a29f ("powerpc: Handle most loads and stores in instruction emulation code")
Cc: stable@vger.kernel.org # v4.14+
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220224162215.3406642-1-anders.roxell@linaro.org
When CONFIG_GENERIC_CPU=y (true for all our defconfigs) we pass
-mcpu=powerpc64 to the compiler, even when we're building a 32-bit
kernel.
This happens because we have an ifdef CONFIG_PPC_BOOK3S_64/else block in
the Makefile that was written before 32-bit supported GENERIC_CPU. Prior
to that the else block only applied to 64-bit Book3E.
The GCC man page says -mcpu=powerpc64 "[specifies] a pure ... 64-bit big
endian PowerPC ... architecture machine [type], with an appropriate,
generic processor model assumed for scheduling purposes."
It's unclear how that interacts with -m32, which we are also passing,
although obviously -m32 is taking precedence in some sense, as the
32-bit kernel only contains 32-bit instructions.
This was noticed by inspection, not via any bug reports, but it does
affect code generation. Comparing before/after code generation, there
are some changes to instruction scheduling, and the after case (with
-mcpu=powerpc64 removed) the compiler seems more keen to use r8.
Fix it by making the else case only apply to Book3E 64, which excludes
32-bit.
Fixes: 0e00a8c9fd ("powerpc: Allow CPU selection also on PPC32")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220215112858.304779-1-mpe@ellerman.id.au
Update btf_dump case for conflicting names caused by forward declaration.
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220301053250.1464204-3-xukuohai@huawei.com
Executing node_set_online() when nid = NUMA_NO_NODE results in an
undefined behavior. node_set_online() will call node_set_state(), into
__node_set(), into set_bit(), and since NUMA_NO_NODE is -1 we'll end up
doing a negative shift operation inside
arch/powerpc/include/asm/bitops.h. This potential UB was detected
running a kernel with CONFIG_UBSAN.
The behavior was introduced by commit 10f78fd0da ("powerpc/numa: Fix a
regression on memoryless node 0"), where the check for nid > 0 was
removed to fix a problem that was happening with nid = 0, but the result
is that now we're trying to online NUMA_NO_NODE nids as well.
Checking for nid >= 0 will allow node 0 to be onlined while avoiding
this UB with NUMA_NO_NODE.
Fixes: 10f78fd0da ("powerpc/numa: Fix a regression on memoryless node 0")
Reported-by: Ping Fang <pifang@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220224182312.1012527-1-danielhb413@gmail.com
Crash recovery (fadump) is setup in the userspace by some service. This
service rebuilds initrd with dump capture capability, if it is not
already dump capture capable before proceeding to register for firmware
assisted dump (echo 1 > /sys/kernel/fadump/registered). But arming the
kernel with crash recovery support does not have to wait for userspace
configuration. So, register for fadump while setting it up itself. This
can at worst lead to a scenario, where /proc/vmcore is ready afer crash
but the initrd does not know how/where to offload it, which is always
better than not having a /proc/vmcore at all due to incomplete
configuration in the userspace at the time of crash.
Commit 0823c68b05 ("powerpc/fadump: re-register firmware-assisted dump
if already registered") ensures this change does not break userspace.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
[mpe: Reword comment]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220201105305.155511-1-hbathini@linux.ibm.com
The testcase uses event code 0x35340401e0 to verify the settings for
different fields in Monitor Mode Control Register A (MMCRA). The fields
include thresh_start, thresh_stop thresh_select, sdar mode, sample and
marked bit. Checks if these fields are translated correctly via perf
interface to MMCRA.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-21-kjain@linux.ibm.com
Currently if a declaration appears in the BTF before the definition, the
definition is dumped as a conflicting name, e.g.:
$ bpftool btf dump file vmlinux format raw | grep "'unix_sock'"
[81287] FWD 'unix_sock' fwd_kind=struct
[89336] STRUCT 'unix_sock' size=1024 vlen=14
$ bpftool btf dump file vmlinux format c | grep "struct unix_sock"
struct unix_sock;
struct unix_sock___2 { <--- conflict, the "___2" is unexpected
struct unix_sock___2 *unix_sk;
This causes a compilation error if the dump output is used as a header file.
Fix it by skipping declaration when counting duplicated type names.
Fixes: 351131b51c ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220301053250.1464204-2-xukuohai@huawei.com
The testcase uses event code 0x1340000001c040 to verify the settings for
different src fields in Monitor Mode Control Register 3 (MMCR3). Checks
if these fields are translated correctly via perf interface to MMCR3 on
ISA v3.1 platform.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-20-kjain@linux.ibm.com
The testcases uses cycles event to verify the freeze counter settings in
Monitor Mode Control Register 2 (MMCR2). Event modifier (exclude_kernel)
setting is used for the event attribute to check the FCxS and FCxH (
Freeze counter in privileged and hypervisor state ) settings via perf
interface.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Add error checking, check MSR for MSR_HV, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-19-kjain@linux.ibm.com
The testcases uses event code 0x010000046080 to verify the l2l3 bit
setting for Monitor Mode Control Register 2 (MMCR2). check if this bit
is set correctly via perf interface in ISA v3.1 platform.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-18-kjain@linux.ibm.com
The testcase uses event code "0x26880" to verify the settings for
different fields in Monitor Mode Control Register 1 (MMCR1). The field
include PMCxCOMB. Checks if this field are translated correctly via perf
interface to MMCR1
Add selftest for mmcr1 comb field.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-16-kjain@linux.ibm.com
The testcase uses event code 0x500fa to verify the FC5-6 bit setting in
Monitor Mode Control Register 0 (MMCR0). Check if FC5-6 bit is not set
in MMCR0 when using Performance Monitor Counter 5 and 6 (PMC5 and PMC6).
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-15-kjain@linux.ibm.com
The testcase uses event code 0x1001e to verify two bit settings (FC5-6
and PMC1CE) in Monitor Mode Control Register 0 (MMCR0). Check if FC5-6
bit to be set in MMCR0 when not using Performance Monitor Counter 5 and
6 (PMC5 and PMC6). And also PMC1CE is expected to be set when using
PMC1. Test if these fields are programmed correctly via perf interface.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-14-kjain@linux.ibm.com
The testcase uses event code 0x500fa ("instructions") to verify the
PMCjCE bit setting in Monitor Mode Control Register 0 (MMCR0). This bit
is expected to be set in MMCR0 when using Performance Monitor Counter
5 (PMC5). Checks if perf interface sets this bit correctly.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-13-kjain@linux.ibm.com
The testcase uses cycles event to check the PMCCEXT bit setting in
Monitor Mode Control Register 0 (MMCR0). Check if perf interface sets
this control bit in MMCR0 on ISA v3.1 platform.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-12-kjain@linux.ibm.com
The testcase uses event code 0x500fa ("instructions") to check the
CC56RUN bit setting in Monitor Mode Control Register 0(MMCR0). In ISA
v3.1 platform, this bit is expected to be set in MMCR0 when using
Performance Monitor Counter 5 and 6 (PMC5 and PMC6). Verify this is done
correctly by perf interface.
CC56RUN bit makes PMC5 and PMC6 count regardless of the run latch state.
This bit is set in power10 since PMC5 and PMC6 is used in power10 for
counting instructions and cycles. Hence added a check to skip this test
in other platforms
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-11-kjain@linux.ibm.com
The testcase uses "instructions" event to verify two bits(PMAE and PMAO)
in Monitor Mode Control Register 0 (MMCR0). At the time of interrupt,
pmae bit ( which enables performance monitor exception ) is expected to
be cleared and pmao (which indicates performance monitor alert) bit is
expected to be set in MMCR0. And testcases handles these checks.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Add error checking, drop GET_MMCR_FIELD, add to .gitignore]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220127072012.662451-10-kjain@linux.ibm.com
