Since commit eb445a15fa ("phy: tusb1210: use bitmasks to set
VENDOR_SPECIFIC2") tusb->vendor_specific2 always contains a valid value
so there no need to check that it is set.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220213130524.18748-8-hdegoede@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
ulpi_read() and ulpi_write() calls can fail. Add wrapper functions to log
errors when this happens and add error checking to the read + write of
the phy parameters from the TUSB1210_VENDOR_SPECIFIC2 register.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220213130524.18748-7-hdegoede@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
According to the comment of the function phy_mipi_dphy_get_default_config(),
it uses minimum D-PHY timings based on MIPI D-PHY specification. They are
derived from the valid ranges specified in Section 6.9, Table 14, Page 41
of the D-PHY specification (v1.2). The table 14 explicitly mentions that
the minimum T-LPX parameter is 50 nanoseconds and the minimum TA-SURE
parameter is T-LPX nanoseconds. Likewise, the kernel doc of the 'lpx' and
'ta_sure' members of struct phy_configure_opts_mipi_dphy mentions that
the minimum values are 50000 picoseconds and @lpx picoseconds respectively.
Also, the function phy_mipi_dphy_config_validate() checks if cfg->lpx is
less than 50000 picoseconds and if cfg->ta_sure is less than cfg->lpx,
which hints the same minimum values.
Without this patch, the function phy_mipi_dphy_get_default_config()
wrongly sets cfg->lpx to 60000 picoseconds and cfg->ta_sure to 2 * cfg->lpx.
So, let's correct them to 50000 picoseconds and cfg->lpx respectively.
Note that I've only tested the patch with RM67191 DSI panel on i.MX8mq EVK.
Help is needed to test with other i.MX8mq, Meson and Rockchip platforms,
as I don't have the hardwares.
Fixes: dddc97e823 ("phy: dphy: Add configuration helpers")
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20220216071257.1647703-1-victor.liu@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add "wake on" support for the newer Synopsis based XHCI only controller.
This works on the 72165 and 72164 and newer chips and does not work
on 7216 based systems. Also switch the USB sysclk to a slower clock
on suspend to save additional power in S2. The clock switch will only
save power on the 72165b0 and newer chips and is a nop on older chips.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220215032422.5179-1-f.fainelli@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There are no remaining callers of set_fs(), so CONFIG_SET_FS
can be removed globally, along with the thread_info field and
any references to it.
This turns access_ok() into a cheaper check against TASK_SIZE_MAX.
As CONFIG_SET_FS is now gone, drop all remaining references to
set_fs()/get_fs(), mm_segment_t, user_addr_max() and uaccess_kernel().
Acked-by: Sam Ravnborg <sam@ravnborg.org> # for sparc32 changes
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Tested-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com> # for arc changes
Acked-by: Stafford Horne <shorne@gmail.com> # [openrisc, asm-generic]
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ia64 only uses set_fs() in one file to handle unaligned access for
both user space and kernel instructions. Rewrite this to explicitly
pass around a flag about which one it is and drop the feature from
the architecture.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
sh uses set_fs/get_fs only in one file, to handle address
errors in both user and kernel memory.
It already has an abstraction to differentiate between I/O
and memory, so adding a third class for kernel memory fits
into the same scheme and lets us kill off CONFIG_SET_FS.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
sparc64 uses address space identifiers to differentiate between kernel
and user space, using ASI_P for kernel threads but ASI_AIUS for normal
user space, with the option of changing between them.
As nothing really changes the ASI any more, just hardcode ASI_AIUS
everywhere. Kernel threads are not allowed to access __user pointers
anyway.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
test_kernel_ptr() uses access_ok() to figure out if a given address
points to user space instead of kernel space. However on architectures
that set CONFIG_ALTERNATE_USER_ADDRESS_SPACE, a pointer can be valid
for both, and the check always fails because access_ok() returns true.
Make the check for user space pointers conditional on the type of
address space layout.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are many different ways that access_ok() is defined across
architectures, but in the end, they all just compare against the
user_addr_max() value or they accept anything.
Provide one definition that works for most architectures, checking
against TASK_SIZE_MAX for user processes or skipping the check inside
of uaccess_kernel() sections.
For architectures without CONFIG_SET_FS(), this should be the fastest
check, as it comes down to a single comparison of a pointer against a
compile-time constant, while the architecture specific versions tend to
do something more complex for historic reasons or get something wrong.
Type checking for __user annotations is handled inconsistently across
architectures, but this is easily simplified as well by using an inline
function that takes a 'const void __user *' argument. A handful of
callers need an extra __user annotation for this.
Some architectures had trick to use 33-bit or 65-bit arithmetic on the
addresses to calculate the overflow, however this simpler version uses
fewer registers, which means it can produce better object code in the
end despite needing a second (statically predicted) branch.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Mark Rutland <mark.rutland@arm.com> [arm64, asm-generic]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On some architectures, access_ok() does not do any argument type
checking, so replacing the definition with a generic one causes
a few warnings for harmless issues that were never caught before.
Fix the ones that I found either through my own test builds or
that were reported by the 0-day bot.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
arm64 has an inline asm implementation of access_ok() that is derived from
the 32-bit arm version and optimized for the case that both the limit and
the size are variable. With set_fs() gone, the limit is always constant,
and the size usually is as well, so just using the default implementation
reduces the check into a comparison against a constant that can be
scheduled by the compiler.
On a defconfig build, this saves over 28KB of .text.
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
While most m68k platforms use separate address spaces for user
and kernel space, at least coldfire does not, and the other
ones have a TASK_SIZE that is less than the entire 4GB address
range.
Using the default implementation of __access_ok() stops coldfire
user space from trivially accessing kernel memory.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Before unifying the mips version of __access_ok() with the generic
code, this converts it to the same algorithm. This is a change in
behavior on mips64, as now address in the user segment, the lower
2^62 bytes, is taken to be valid, relying on a page fault for
addresses that are within that segment but not valid on that CPU.
The new version should be the most effecient way to do this, but
it gets rid of the special handling for size=0 that most other
architectures ignore as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Address errors have always been treated as unaliged accesses and handled
as such. But address errors are also issued for illegal accesses like
user to kernel space or accesses outside of implemented spaces. This
change implements Linux exception handling for accesses to the illegal
space above the CPU implemented maximum virtual user address and the
MIPS 64bit architecture maximum. With this we can now use a fixed value
for the maximum task size on every MIPS CPU and get a more optimized
access_ok().
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Nine architectures are still missing __{get,put}_kernel_nofault:
alpha, ia64, microblaze, nds32, nios2, openrisc, sh, sparc32, xtensa.
Add a generic version that lets everything use the normal
copy_{from,to}_kernel_nofault() code based on these, removing the last
use of get_fs()/set_fs() from architecture-independent code.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Unlike other architectures, the nios2 version of __put_user() has an
extra check for access_ok(), preventing it from being used to implement
__put_kernel_nofault().
Split up put_user() along the same lines as __get_user()/get_user()
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The way that access_ok() is defined on x86 is slightly different from
most other architectures, and a bit more complex.
The generic version tends to result in the best output on all
architectures, as it results in single comparison against a constant
limit for calls with a known size.
There are a few callers of __range_not_ok(), all of which use TASK_SIZE
as the limit rather than TASK_SIZE_MAX, but I could not see any reason
for picking this. Changing these to call __access_ok() instead uses the
default limit, but keeps the behavior otherwise.
x86 is the only architecture with a WARN_ON_IN_IRQ() checking
access_ok(), but it's probably best to leave that in place.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The __range_not_ok() helper is an x86 (and sparc64) specific interface
that does roughly the same thing as __access_ok(), but with different
calling conventions.
Change this to use the normal interface in order for consistency as we
clean up all access_ok() implementations.
This changes the limit from TASK_SIZE to TASK_SIZE_MAX, which Al points
out is the right thing do do here anyway.
The callers have to use __access_ok() instead of the normal access_ok()
though, because on x86 that contains a WARN_ON_IN_IRQ() check that cannot
be used inside of NMI context while tracing.
The check in copy_code() is not needed any more, because this one is
already done by copy_from_user_nmi().
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/lkml/YgsUKcXGR7r4nINj@zeniv-ca.linux.org.uk/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
sparc64 is one of the architectures that uses separate address
spaces for kernel and user addresses, so __get_kernel_nofault()
can not just call into the normal __get_user() without the
access_ok() check.
Instead duplicate __get_user() and __put_user() into their
in-kernel versions, with minor changes for the calling conventions
and leaving out the address space modifier on the assembler
instruction.
This could surely be written more elegantly, but duplicating it
gets the job done.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The get_user()/put_user() functions are meant to check for
access_ok(), while the __get_user()/__put_user() functions
don't.
This broke in 4.19 for nds32, when it gained an extraneous
check in __get_user(), but lost the check it needs in
__put_user().
Fixes: 487913ab18 ("nds32: Extract the checking and getting pointer to a macro")
Cc: stable@vger.kernel.org @ v4.19+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
These two architectures implement 8-byte get_user() through
a memcpy() into a four-byte variable, which won't fit.
Use a temporary 64-bit variable instead here, and use a double
cast the way that risc-v and openrisc do to avoid compile-time
warnings.
Fixes: 6a090e9797 ("arch/microblaze: support get_user() of size 8 bytes")
Fixes: 5ccc6af5e8 ("nios2: Memory management")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
D1 has a register layout like A100 and H616, with the moved SIDDQ bit.
Unlike H616 it does not have any dependencies between PHY instances.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220203013558.11490-4-samuel@sholland.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
As Icenowy pointed out, newer manuals (starting with H6) actually
document the register block at offset 0x800 as "HCI controller and PHY
interface", also describe the bits in our "PMU_UNK1" register.
Let's put proper names to those "unknown" variables and symbols.
While we are at it, generalise the existing code by allowing a bitmap
of bits to clear and set, to cover newer SoCs: The A100 and H616 use a
different bit for the SIDDQ control.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220203013558.11490-3-samuel@sholland.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
D1 features one OTG port and one host port, like the A64 SoC, so its
USB PHY supports the same set of properties. Add the new compatible to
the existing binding.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220203013558.11490-1-samuel@sholland.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver uses an atomic_t variable: gs_usb:active_channels to keep
track of the number of opened channels in order to only allocate
memory for the URBs when this count changes from zero to one.
However, the driver does not decrement the counter when an error
occurs in gs_can_open(). This issue is fixed by changing the type from
atomic_t to u8 and by simplifying the logic accordingly.
It is safe to use an u8 here because the network stack big kernel lock
(a.k.a. rtnl_mutex) is being hold. For details, please refer to [1].
[1] https://lore.kernel.org/linux-can/CAMZ6Rq+sHpiw34ijPsmp7vbUpDtJwvVtdV7CvRZJsLixjAFfrg@mail.gmail.com/T/#t
Fixes: d08e973a77 ("can: gs_usb: Added support for the GS_USB CAN devices")
Link: https://lore.kernel.org/all/20220214234814.1321599-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The driver uses an atomic_t variable: struct
es58x_device::opened_channel_cnt to keep track of the number of opened
channels in order to only allocate memory for the URBs when this count
changes from zero to one.
While the intent was to prevent race conditions, the choice of an
atomic_t turns out to be a bad idea for several reasons:
- implementation is incorrect and fails to decrement
opened_channel_cnt when the URB allocation fails as reported in
[1].
- even if opened_channel_cnt were to be correctly decremented,
atomic_t is insufficient to cover edge cases: there can be a race
condition in which 1/ a first process fails to allocate URBs
memory 2/ a second process enters es58x_open() before the first
process does its cleanup and decrements opened_channed_cnt. In
which case, the second process would successfully return despite
the URBs memory not being allocated.
- actually, any kind of locking mechanism was useless here because
it is redundant with the network stack big kernel lock
(a.k.a. rtnl_lock) which is being hold by all the callers of
net_device_ops:ndo_open() and net_device_ops:ndo_close(). c.f. the
ASSERST_RTNL() calls in __dev_open() [2] and __dev_close_many()
[3].
The atmomic_t is thus replaced by a simple u8 type and the logic to
increment and decrement es58x_device:opened_channel_cnt is simplified
accordingly fixing the bug reported in [1]. We do not check again for
ASSERST_RTNL() as this is already done by the callers.
[1] https://lore.kernel.org/linux-can/20220201140351.GA2548@kili/T/#u
[2] https://elixir.bootlin.com/linux/v5.16/source/net/core/dev.c#L1463
[3] https://elixir.bootlin.com/linux/v5.16/source/net/core/dev.c#L1541
Fixes: 8537257874 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces")
Link: https://lore.kernel.org/all/20220212112713.577957-1-mailhol.vincent@wanadoo.fr
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
To avoid name clashes unify all the function and static object names and
use one of the following prefixes which should be sufficiently unique:
- <vendor>_nor_
- <flash_family>_nor_
- <flash_part>_
There are no functional changes.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220223134358.1914798-17-michael@walle.cc
To avoid name clashes unify all the function and static object names and
use one of the following prefixes which should be sufficiently unique:
- <vendor>_nor_
- <flash_family>_nor_
- <flash_part>_
There are no functional changes.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220223134358.1914798-16-michael@walle.cc
To avoid name clashes unify all the function and static object names and
use one of the following prefixes which should be sufficiently unique:
- <vendor>_nor_
- <flash_family>_nor_
- <flash_part>_
There are no functional changes.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220223134358.1914798-15-michael@walle.cc
To avoid name clashes unify all the function and static object names and
use one of the following prefixes which should be sufficiently unique:
- <vendor>_nor_
- <flash_family>_nor_
- <flash_part>_
There are no functional changes.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220223134358.1914798-14-michael@walle.cc
To avoid name clashes unify all the function and static object names and
use one of the following prefixes which should be sufficiently unique:
- <vendor>_nor_
- <flash_family>_nor_
- <flash_part>_
There are no functional changes.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220223134358.1914798-13-michael@walle.cc
To avoid name clashes unify all the function and static object names and
use one of the following prefixes which should be sufficiently unique:
- <vendor>_nor_
- <flash_family>_nor_
- <flash_part>_
There are no functional changes.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220223134358.1914798-12-michael@walle.cc
To avoid name clashes unify all the function and static object names and
use one of the following prefixes which should be sufficiently unique:
- <vendor>_nor_
- <flash_family>_nor_
- <flash_part>_
There are no functional changes.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220223134358.1914798-11-michael@walle.cc
To avoid name clashes unify all the function and static object names and
use one of the following prefixes which should be sufficiently unique:
- <vendor>_nor_
- <flash_family>_nor_
- <flash_part>_
There are no functional changes.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220223134358.1914798-10-michael@walle.cc
To avoid name clashes unify all the function and static object names and
use one of the following prefixes which should be sufficiently unique:
- <vendor>_nor_
- <flash_family>_nor_
- <flash_part>_
There are no functional changes.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220223134358.1914798-9-michael@walle.cc
To avoid name clashes unify all the function and static object names and
use one of the following prefixes which should be sufficiently unique:
- <vendor>_nor_
- <flash_family>_nor_
- <flash_part>_
There are no functional changes.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220223134358.1914798-8-michael@walle.cc
To avoid name clashes unify all the function and static object names and
use one of the following prefixes which should be sufficiently unique:
- <vendor>_nor_
- <flash_family>_nor_
- <flash_part>_
There are no functional changes.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220223134358.1914798-7-michael@walle.cc
To avoid name clashes unify all the function and static object names and
use one of the following prefixes which should be sufficiently unique:
- <vendor>_nor_
- <flash_family>_nor_
- <flash_part>_
There are no functional changes.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220223134358.1914798-6-michael@walle.cc
To avoid name clashes unify all the function and static object names and
use one of the following prefixes which should be sufficiently unique:
- <vendor>_nor_
- <flash_family>_nor_
- <flash_part>_
There are no functional changes.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220223134358.1914798-5-michael@walle.cc
To avoid name clashes unify all the function and static object names and
use one of the following prefixes which should be sufficiently unique:
- <vendor>_nor_
- <flash_family>_nor_
- <flash_part>_
There are no functional changes.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220223134358.1914798-4-michael@walle.cc
To avoid name clashes unify all the function and static object names and
use one of the following prefixes which should be sufficiently unique:
- <vendor>_nor_
- <flash_family>_nor_
- <flash_part>_
There are no functional changes.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220223134358.1914798-3-michael@walle.cc
To avoid name clashes unify all the function and static object names and
use one of the following prefixes which should be sufficiently unique:
- <vendor>_nor_
- <flash_family>_nor_
- <flash_part>_
There are no functional changes.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220223134358.1914798-2-michael@walle.cc
Mat Martineau says:
====================
mptcp: Fixes for 5.17
Patch 1 fixes an issue with the SIOCOUTQ ioctl in MPTCP sockets that
have performed a fallback to TCP.
Patch 2 is a selftest fix to correctly remove temp files.
Patch 3 fixes a shift-out-of-bounds issue found by syzkaller.
====================
Link: https://lore.kernel.org/r/20220225005259.318898-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Syzkaller with UBSAN uncovered a scenario where a large number of
DATA_FIN retransmits caused a shift-out-of-bounds in the DATA_FIN
timeout calculation:
================================================================================
UBSAN: shift-out-of-bounds in net/mptcp/protocol.c:470:29
shift exponent 32 is too large for 32-bit type 'unsigned int'
CPU: 1 PID: 13059 Comm: kworker/1:0 Not tainted 5.17.0-rc2-00630-g5fbf21c90c60 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Workqueue: events mptcp_worker
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
ubsan_epilogue+0xb/0x5a lib/ubsan.c:151
__ubsan_handle_shift_out_of_bounds.cold+0xb2/0x20e lib/ubsan.c:330
mptcp_set_datafin_timeout net/mptcp/protocol.c:470 [inline]
__mptcp_retrans.cold+0x72/0x77 net/mptcp/protocol.c:2445
mptcp_worker+0x58a/0xa70 net/mptcp/protocol.c:2528
process_one_work+0x9df/0x16d0 kernel/workqueue.c:2307
worker_thread+0x95/0xe10 kernel/workqueue.c:2454
kthread+0x2f4/0x3b0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
================================================================================
This change limits the maximum timeout by limiting the size of the
shift, which keeps all intermediate values in-bounds.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/259
Fixes: 6477dd39e6 ("mptcp: Retransmit DATA_FIN")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 05be5e273c ("selftests: mptcp: add disconnect tests")
the mptcp selftests leave behind a couple of tmp files after
each run. run_tests_disconnect() misnames a few variables used to
track them. Address the issue setting the appropriate global variables
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MPTCP SIOCOUTQ implementation is not very accurate in
case of fallback: it only measures the data in the MPTCP-level
write queue, but it does not take in account the subflow
write queue utilization. In case of fallback the first can be
empty, while the latter is not.
The above produces sporadic self-tests issues and can foul
legit user-space application.
Fix the issue additionally querying the subflow in case of fallback.
Fixes: 644807e3e4 ("mptcp: add SIOCINQ, OUTQ and OUTQNSD ioctls")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/260
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Horman says:
====================
nfp: flow-independent tc action hardware offload
Baowen Zheng says:
Allow nfp NIC to offload tc actions independent of flows.
The motivation for this work is to offload tc actions independent of flows
for nfp NIC. We allow nfp driver to provide hardware offload of OVS
metering feature - which calls for policers that may be used by multiple
flows and whose lifecycle is independent of any flows that use them.
When nfp driver tries to offload a flow table using the independent action,
the driver will search if the action is already offloaded to the hardware.
If not, the flow table offload will fail.
When the nfp NIC successes to offload an action, the user can check
in_hw_count when dumping the tc action.
Tc cli command to offload and dump an action:
# tc actions add action police rate 100mbit burst 10000k index 200 skip_sw
# tc -s -d actions list action police
total acts 1
action order 0: police 0xc8 rate 100Mbit burst 10000Kb mtu 2Kb action reclassify
overhead 0b linklayer ethernet
ref 1 bind 0 installed 142 sec used 0 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
skip_sw in_hw in_hw_count 1
used_hw_stats delayed
====================
Link: https://lore.kernel.org/r/20220223162302.97609-1-simon.horman@corigine.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
