What for? To improve the script maintainability.
1. License
As stated by Jonathan Corbet in the reply to my version 1, the SPDX line
is enough.
2. The to-do list comment
As suggested by Jonathan Corbet in reply to my version 3, this section
doesn't need to be transitioned. And so it is removed for clarity.
3. The historical changelog comments
As suggested by Jonathan Corbet in a reply to v3, this section can go.
I wanted to keep it, but since it doesn't contain copyright notices,
let's just have it clean and simple.
4. The "format of comments" comment block
As suggested by Jani Nikula in a reply to my first version of this
transformation, Documentation/doc-guide/kernel-doc.rst can serve as the
information hub for comment formatting. The section DESCRIPTION already
points there, so the original comment block can just be removed.
Suggested-by: Jonathan Corbet <corbet@lwn.net>
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Disliked-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220218181628.1411551-11-tomasz.warniello@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Aim: unified POD, user more satisfied, script better structured
You can see the results with:
$ scripts/kernel-doc -help
Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Disliked-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220218181628.1411551-10-tomasz.warniello@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Aim: unified POD, user more satisfied, script better structured
Notes:
- The -help token is added.
- The entries are sorted alphbetically.
Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Disliked-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220218181628.1411551-9-tomasz.warniello@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Aim: unified POD, user more satisfied, script better structured
A subsection "reStructuredText only" is added for -enable-lineno.
Other notes:
- paragraphing correction
Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Disliked-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220218181628.1411551-8-tomasz.warniello@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Aim: unified POD, user more satisfied, script better structured
The plurals in -function and -nosymbol are corrected to singulars.
That's how the script works now. I think this describes the syntax better.
The plurar suggests multiple FILE arguments might be possible. So this
seems more coherent.
Other notes:
- paragraphing correction
- article correction
Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Disliked-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220218181628.1411551-7-tomasz.warniello@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Aim: unified POD, user more happy
This section is renamed to "Output format modifiers" to make it simple.
To make it even more simple, a subsection is added:
"reStructuredText only".
Other notes:
- paragraphing correction
- article correction
Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Disliked-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220218181628.1411551-6-tomasz.warniello@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Another step in the direction of a uniform POD documentation, which will
make users happier.
Options land at the end of the script, not to clutter the file top.
The default output format is corrected to rst. That's what it is now.
A POD delimiting comment is added to the script head, which improves
the script logical structure.
Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Disliked-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220218181628.1411551-5-tomasz.warniello@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Transition the description section into POD. This is one of the standard
documentation sections. This adjustment makes the section available for
POD and makes it look better.
Notes:
- an article addition
- paragraphing correction
Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Disliked-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220218181628.1411551-4-tomasz.warniello@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The former usage function is substituted, although not as the -h and -help
parameter handler yet.
Purpose: Use Pod::Usage to handle documentation printing in an integrated
way.
Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Disliked-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220218181628.1411551-3-tomasz.warniello@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The NAME section provides the doc title, while SYNOPSIS contains
the basic syntax and usage description, which will be printed
in the help document and in the error output produced on wrong script
usage.
The rationale is to give users simple and succinct enlightment,
at the same time structuring the script internally for the maintainers.
In the synopsis, Rst-only options are grouped around rst, and the rest is
arranged as in the OPTIONS subsections (yet to be translated into POD,
check at the end of the series).
The third of the basic sections, DESCRIPTION, is added separately.
Signed-off-by: Tomasz Warniełło <tomasz.warniello@gmail.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Disliked-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/r/20220218181628.1411551-2-tomasz.warniello@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
We have newer renoir platforms with different codecs combinations.
Add struct in legacy machine driver and add to list of supported
renoir machine to support sound card registration on platform with
rt5682s as primary headset codec and max98360 and rt1019 as speaker
amp codec.
This also fixes error reported by kernel robot:
"error: 'EN_SPKR_GPIO_DW' undeclared here"
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20220222124213.721224-3-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Change sound card name for guybrush machine with rt5682 as primary
codec and rt1019 amp to align with names given in UCM config.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20220222124213.721224-2-AjitKumar.Pandey@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are 2 duplicated words found in osnoise tracer documentation.
This patch removes them.
Signed-off-by: Oscar Shiang <oscar0225@livemail.tw>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Link: https://lore.kernel.org/r/TYCP286MB1913117487F390E3BCE38B15A1399@TYCP286MB1913.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
As Jakub noticed, prints should be avoided on the datapath.
Also, as packets would never come to the else branch in
ping_lookup(), remove pr_err() from ping_lookup().
Fixes: 35a79e64de ("ping: fix the dif and sdif check in ping_lookup")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/1ef3f2fcd31bd681a193b1fcf235eee1603819bd.1645674068.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Revert of a patch that instead of fixing a AQ error when trying
to reset BW limit introduced several regressions related to
creation and managing TC. Currently there are errors when creating
a TC on both PF and VF.
Error log:
[17428.783095] i40e 0000:3b:00.1: AQ command Config VSI BW allocation per TC failed = 14
[17428.783107] i40e 0000:3b:00.1: Failed configuring TC map 0 for VSI 391
[17428.783254] i40e 0000:3b:00.1: AQ command Config VSI BW allocation per TC failed = 14
[17428.783259] i40e 0000:3b:00.1: Unable to configure TC map 0 for VSI 391
This reverts commit 3d2504663c.
Fixes: 3d2504663c (i40e: Fix reset bw limit when DCB enabled with 1 TC)
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220223175347.1690692-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
valid_lft, prefered_lft and tstamp are always accessed under the lock
"lock" in other places. Reading these without taking the lock may result
in inconsistencies regarding the calculation of the valid and preferred
variables since decisions are taken on these fields for those variables.
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Niels Dossche <niels.dossche@ugent.be>
Link: https://lore.kernel.org/r/20220223131954.6570-1-niels.dossche@ugent.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
smc_pnetid_by_table_ib() uses read_lock() and then it calls smc_pnet_apply_ib()
which, in turn, calls mutex_lock(&smc_ib_devices.mutex).
read_lock() disables preemption. Therefore, the code acquires a mutex while in
atomic context and it leads to a SAC bug.
Fix this bug by replacing the rwlock with a mutex.
Reported-and-tested-by: syzbot+4f322a6d84e991c38775@syzkaller.appspotmail.com
Fixes: 64e28b52c7 ("net/smc: add pnet table namespace support")
Confirmed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20220223100252.22562-1-fmdefrancesco@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit b7a49f7305 ("bnx2x: Utilize firmware 7.13.21.0") added
new firmware support in the driver with maintaining older firmware
compatibility. However, older firmware was not added in MODULE_FIRMWARE()
which caused missing firmware files in initrd image leading to driver load
failure from initrd. This patch adds MODULE_FIRMWARE() for older firmware
version to have firmware files included in initrd.
Fixes: b7a49f7305 ("bnx2x: Utilize firmware 7.13.21.0")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215627
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220223085720.12021-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 2afeec08ab.
The reasoning in the commit was wrong - the code expected to setup the
watch even if 'hotplug-status' didn't exist. In fact, it relied on the
watch being fired the first time - to check if maybe 'hotplug-status' is
already set to 'connected'. Not registering a watch for non-existing
path (which is the case if hotplug script hasn't been executed yet),
made the backend not waiting for the hotplug script to execute. This in
turns, made the netfront think the interface is fully operational, while
in fact it was not (the vif interface on xen-netback side might not be
configured yet).
This was a workaround for 'hotplug-status' erroneously being removed.
But since that is reverted now, the workaround is not necessary either.
More discussion at
https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe.org/T/#u
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Michael Brown <mbrown@fensystems.co.uk>
Link: https://lore.kernel.org/r/20220222001817.2264967-2-marmarek@invisiblethingslab.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 1f2565780e.
The 'hotplug-status' node should not be removed as long as the vif
device remains configured. Otherwise the xen-netback would wait for
re-running the network script even if it was already called (in case of
the frontent re-connecting). But also, it _should_ be removed when the
vif device is destroyed (for example when unbinding the driver) -
otherwise hotplug script would not configure the device whenever it
re-appear.
Moving removal of the 'hotplug-status' node was a workaround for nothing
calling network script after xen-netback module is reloaded. But when
vif interface is re-created (on xen-netback unbind/bind for example),
the script should be called, regardless of who does that - currently
this case is not handled by the toolstack, and requires manual
script call. Keeping hotplug-status=connected to skip the call is wrong
and leads to not configured interface.
More discussion at
https://lore.kernel.org/xen-devel/afedd7cb-a291-e773-8b0d-4db9b291fa98@ipxe.org/T/#u
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Link: https://lore.kernel.org/r/20220222001817.2264967-1-marmarek@invisiblethingslab.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sparse is picky about casts between different address spaces. A cast to
plain void * needs to be accompanied by a __force modifier and casting
back to void __iomem * needs to be explicit to avoid warnings.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 88724b78a8 ("soc/tegra: fuse: Use resource-managed helpers")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Update tegra_fuse_cells with below entries:
- gcplex-config-fuse:
Configuration bits for GPU, used to enable/disable write protected
region used for storing GPU firmware.
- pdi0:
Unique per chip public identifier.
- pdi1:
Unique per chip public identifier.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Kartik <kkartik@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
All device drivers got runtime PM and OPP support. Flip the core domain
support status for Tegra20 and Tegra30 SoCs.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Replace dev_printk() with a generic dev_err_probe() helper which silences
noisy error messages about deferred probe and makes easy to debug failing
deferred probe by printing notification about the failure to KMSG in the
end of kernel booting process and by adding failing device and the reason
of deferred probe to devices_deferred of debugfs. This was proven to be
useful in the case of eDP driver regression by immediately showing why
display driver was failing when user asked for help, otherwise it would've
been much more difficult to debug such problems on a third party device
that doesn't have developer setup.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Extend the example with:
- an array where each element has constraints (min/max value),
- property not allowed in case of different compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220223073547.8746-2-krzysztof.kozlowski@canonical.com
Installing dtschema from github.com/devicetree-org is not needed anymore
because dtschema is now part of regular PyPI repository. In certain
cases it might cause some troubles as it brings latest master version,
not the stable release:
$ pip3 show dtschema
Version: 2020.8.2.dev4+g341f3e3
$ make dt_binding_check
dtschema minimum version is v2020.8.1
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220223073547.8746-1-krzysztof.kozlowski@canonical.com
Add MMC aliases to ensure that the /dev/mmcblk IDs won't change depending
on the probe order of the MMC drivers.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Rename DSI bridge node to match the requirement of the DSI DT schema.
This silences DTB-check warning about the incorrect name.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When the Tegra High-Speed UART is used instead of the regular UART, the
reg-shift property is implied from the compatible string and should not
be explicitly listed.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Enable S/PDIF controller to enable HDMI audio support on ASUS TF101.
Use nvidia,fixed-parent-rate property that prevents audio rate conflict
between S/PDIF and I2S.
Tested-by: Robert Eckelmann <longnoserob@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Drop the locks around most primary plane register writes.
The lock isn't needed since each plane's register are neatly
contained on their own cachelines.
The one exception we have to make is DSPADDR/DSPSURF which is
(ab)used to also trigger FBC nukes on pre-snb (since the
hardware doesn't seem to have any dedicated mechanism to
trigger nukes). So we need to keep the lock around it to
protect against the rmw performed by the fbc code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220210062403.18690-5-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Drop the locks around cursor plane register writes. The
lock isn't needed since each plane's register are neatly
contained on their own cachelines.
The locking did have a secondary effect of disabling
interrupts around the cursor registers writes though.
If we drop that then we open outselves up for sceduling
delays and whatnot while on the middle of the register
writes. That increases the chance of not all the register
writes land during the same frame. For normal atomic
commits this is not a concern as the vblank evade mechanism
anyway disables interrupts around the update, but the legacy
cursor codepath does not. Technically we should do a vblank
evade there as well, but so far no one has bothered to hook
that up. So in the meantime let's put an explicit local irq
disable/enable around the legacy cursor update to keep the
race window minimal.
v2: local_irq_{disable,enable}() for legacy cursor ioctl
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211092604.393-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
On icl+ all plane registers are armed by PLANE_SURF, so we can
move almost everything over into the update_noarm() hook.
The PLANE_CTL write has to stay in the icl_update_arm() hook though
as it still exhibits the somewhat annoying self-arming behaviour
when the plane transitioning from disabled to enabled.
We could either do a full split for skl+ vs. icl+, or we could try
some other kind of split where we'd eg. keep most things in the skl+
functions and call them from the icl+ functions. I think a full split
is probably the cleaner approach since we've anyway accumulated quite
a bit of icl+ specific things, so that is what I opted to do.
Some i915_update_info stats for tgl:
before: after:
Updates: 5043 Updates: 5043
| |
1us | 1us |
|** |***
4us |****** 4us |********
|********** |***********
16us |*********** 16us |**********
|**** |*
66us | 66us |
| |
262us | 262us |
| |
1ms | 1ms |
| |
4ms | 4ms |
| |
17ms | 17ms |
| |
Min update: 3494ns Min update: 2983ns
Max update: 49491ns Max update: 39986ns
Average update: 18031ns Average update: 13423ns
Overruns > 100us: 0 Overruns > 100us: 0
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220210062403.18690-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
On the Lenovo Yoga Tablet 2 830 / 1050 / 1051 models the 32KHz PMU clk,
which can be muxed externally to SUS pin 5 and/or 6 is used as a clock
for the audio codec.
On the 830 and 1050 models, with ship with Android as factory OS the
pin-muxing for this is not setup by the BIOS.
Add a pinconf group + function for the pmu_clk on SUS pin 5 and 6 to
allow setting the pinmux up from within the x86-android-tablets
platform code.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220223133153.730337-2-hdegoede@redhat.com
Tile4 in bspec format is 4K tile organized into
64B subtiles with same basic shape as for legacy TileY
which will be supported by Display13.
v2: - Moved Tile4 associating struct for modifier/display to
the beginning(Imre Deak)
- Removed unneeded case I915_FORMAT_MOD_4_TILED modifier
checks(Imre Deak)
- Fixed I915_FORMAT_MOD_4_TILED to be 9 instead of 12
(Imre Deak)
v3: - Rebased patch on top of new changes related to plane_caps.
- Added static assert to check that PLANE_CTL_TILING_YF
matches PLANE_CTL_TILING_4(Nanley Chery)
- Fixed naming and layout description for Tile 4 in drm uapi
header(Nanley Chery)
v4: - Extracted drm_fourcc changes to separate patch(Nanley Chery)
Reviewed-by: Imre Deak <imre.deak@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220118115544.15116-3-stanislav.lisovskiy@intel.com
The only time that we need to wake up /dev/random writers on
RNDCLEARPOOL/RNDZAPPOOL is when we're changing from a value that is
greater than or equal to POOL_MIN_BITS to zero, because if we're
changing from below POOL_MIN_BITS to zero, the writers are already
unblocked.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
When the interrupt handler does not have a valid cycle counter, it calls
get_reg() to read a register from the irq stack, in round-robin.
Currently it does this assuming that registers are 32-bit. This is
_probably_ the case, and probably all platforms without cycle counters
are in fact 32-bit platforms. But maybe not, and either way, it's not
quite correct. This commit fixes that to deal with `unsigned long`
rather than `u32`.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This tiling layout uses 4KB tiles in a row-major layout. It has the same
shape as Tile Y at two granularities: 4KB (128B x 32) and 64B (16B x 4). It
only differs from Tile Y at the 256B granularity in between. At this
granularity, Tile Y has a shape of 16B x 32 rows, but this tiling has a shape
of 64B x 8 rows.
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Nanley Chery <nanley.g.chery@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220118115544.15116-2-stanislav.lisovskiy@intel.com
There is a big gap between inode_should_defrag() and autodefrag extent
size threshold. For inode_should_defrag() it has a flexible
@small_write value. For compressed extent is 16K, and for non-compressed
extent it's 64K.
However for autodefrag extent size threshold, it's always fixed to the
default value (256K).
This means, the following write sequence will trigger autodefrag to
defrag ranges which didn't trigger autodefrag:
pwrite 0 8k
sync
pwrite 8k 128K
sync
The latter 128K write will also be considered as a defrag target (if
other conditions are met). While only that 8K write is really
triggering autodefrag.
Such behavior can cause extra IO for autodefrag.
Close the gap, by copying the @small_write value into inode_defrag, so
that later autodefrag can use the same @small_write value which
triggered autodefrag.
With the existing transid value, this allows autodefrag really to scan
the ranges which triggered autodefrag.
Although this behavior change is mostly reducing the extent_thresh value
for autodefrag, I believe in the future we should allow users to specify
the autodefrag extent threshold through mount options, but that's an
other problem to consider in the future.
CC: stable@vger.kernel.org # 5.16+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This patch implements a combo phy driver for Rockchip SoCs
with NaNeng IP block. This phy can be used as pcie-phy, usb3-phy,
sata-phy or sgmii-phy.
Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20220208091326.12495-4-yifeng.zhao@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the compatible strings for the Naneng combo PHY found on rockchip SoC.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20220208091326.12495-3-yifeng.zhao@rock-chips.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
