The first bug is that reading the 5 alarm registers results in a read
operation of 20 bytes. The reason is because the destination buffer is
defined as an array of "unsigned int", and we use the sizeof()
operator on this array to define the bulk read count.
The second bug is that the read value is invalid, because we are
indexing the destination buffer as integers (4 bytes), instead of
indexing it as u8.
Changing the destination buffer type to u8 fixes both problems.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220208162908.3182581-1-hugo@hugovil.com
If the interrupt pin of the PCF2127 is routed to the input of a GPIO
expander using the pca953x driver, the later will only accept an IRQ
of type IRQ_TYPE_EDGE_FALLING or IRQ_TYPE_EDGE_RISING, and the IRQ
request will fail.
Therefore, allow the IRQ type to be passed from the device tree data
if available.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220117225742.1252362-1-hugo@hugovil.com
When building with automatic stack variable initialization, GCC 12
complains about variables defined outside of switch case statements.
Move variables outside the switch, which silences warnings:
./drivers/rtc/rtc-pcf8523.c:284:20: error: statement will never be executed [-Werror=switch-unreachable]
284 | u8 mode;
|
./drivers/rtc/rtc-pcf8523.c:245:21: error: statement will never be executed [-Werror=switch-unreachable]
245 | u32 value;
| ^~~~~
Signed-off-by: Victor Erminpour <victor.erminpour@oracle.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1644453027-886-1-git-send-email-victor.erminpour@oracle.com
H6 and newer variants of the RTC hardware have a bus clock gate in the
PRCM CCU. This was not known at the time H6 support was added, so it was
not included in the H6 RTC binding, nor in the H6 PRCM CCU driver. Now
that this clock gate is documented, it is included in the A100 and D1
PRCM CCU drivers. Therefore, the RTC driver needs to have a consumer for
the clock gate to prevent Linux from disabling it.
Patch-changes: 3
- New patch for compatibility with new CCU drivers
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220203021736.13434-4-samuel@sholland.org
These new RTC variants all have a single alarm, like the R40 variant.
For the new SoCs, start requiring a complete list of input clocks. The
H616 has three required clocks. The R329 also has three required clocks
(but one is different), plus an optional crystal oscillator input. The
D1 RTC is identical to the one in the R329.
And since these new SoCs will have a well-defined output clock order as
well, they do not need the clock-output-names property.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220203021736.13434-3-samuel@sholland.org
- Use "enum" for compatibles instead of several "const" alternatives.
- Merge the H6 clock-output-names minItems/maxItems constraint into the
identical block above.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220203021736.13434-2-samuel@sholland.org
If the irqwork is still scheduled or running while the RTC device is
removed, a use-after-free occurs in rtc_timer_do_work(). Cleanup the
timerqueue and ensure the work is stopped to fix this.
BUG: KASAN: use-after-free in mutex_lock+0x94/0x110
Write of size 8 at addr ffffff801d846338 by task kworker/3:1/41
Workqueue: events rtc_timer_do_work
Call trace:
mutex_lock+0x94/0x110
rtc_timer_do_work+0xec/0x630
process_one_work+0x5fc/0x1344
...
Allocated by task 551:
kmem_cache_alloc_trace+0x384/0x6e0
devm_rtc_allocate_device+0xf0/0x574
devm_rtc_device_register+0x2c/0x12c
...
Freed by task 572:
kfree+0x114/0x4d0
rtc_device_release+0x64/0x80
device_release+0x8c/0x1f4
kobject_put+0x1c4/0x4b0
put_device+0x20/0x30
devm_rtc_release_device+0x1c/0x30
devm_action_release+0x54/0x90
release_nodes+0x124/0x310
devres_release_group+0x170/0x240
i2c_device_remove+0xd8/0x314
...
Last potentially related work creation:
insert_work+0x5c/0x330
queue_work_on+0xcc/0x154
rtc_set_time+0x188/0x5bc
rtc_dev_ioctl+0x2ac/0xbd0
...
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211210160951.7718-1-vincent.whitchurch@axis.com
Don't need to do blkg_iostat_set for top blkg iostat on each CPU,
so move it after percpu stat aggregation.
Fixes: ef45fe470e ("blk-cgroup: show global disk stats in root cgroup io.stat")
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220213085902.88884-1-zhouchengming@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
atafb_probe() overrides the atafb_ops.fb_setcolreg() method to match the
actual graphics hardware. Besides, the shifts by 8 were bogus, as the
individual .fb_setcolreg() implementations already take care of that.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Remove the custom macro up(), and convert the code to use the standard
round_up() helper instead.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
The horizontal resolution (640) for the TT High video mode (1280x960) is
definitely bogus. While fixing that, correct the timings to match the
TTM195 service manual.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
When testing metric expressions we fake counter values from 1 going
upward. For some metrics this can yield negative values that are clipped
to zero, and then cause divide by zero failures.
Such clipping is questionable but may be a result of tools automatically
generating metrics. A workaround for this case is to try a second time
with counter values going in the opposite direction.
This case was seen in a metric like:
event1 / max(event2 - event3, 0)
But it may also happen in more sensible metrics like:
event1 / (event2 + event3 - 1 - event4)
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211223185622.3435128-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that a config flag for branch broadcast has been added, take it into
account when trying to deduce what the driver would have programmed the
TRCCONFIGR register to.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki Poulouse <suzuki.poulose@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/20220113091056.1297982-4-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some code in builtin-c2c.c calls bitmap_weight() to check if any bit of
a given bitmap is set.
It's better to use bitmap_empty() in that case because bitmap_empty()
stops traversing the bitmap as soon as it finds first set bit, while
bitmap_weight() counts all bits unconditionally.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Klimov <aklimov@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: David Laight <david.laight@aculab.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: http://lore.kernel.org/lkml/20220123183925.1052919-13-yury.norov@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the --tui command line flags dependent HAVE_SLANG_SUPPORT. This was
reported as confusing in:
https://lore.kernel.org/linux-perf-users/YevaTkzdXmFKdGpc@zx-spectrum.none/
Reported-by: xaizek <xaizek@posteo.net>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: xaizek <xaizek@posteo.net>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220123191849.3655855-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add documentation for Event Trace and TNT disable to the perf Intel PT man
page.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-26-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add sample flags to the PostgreSQL database definition and export.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-25-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add sample flags to the SQLite database definition and export.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-24-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, the transaction flag (x) is kept separate from branch flags.
Instead of doing the same for the interrupt disabled flags (D and t), add
all flags so that new flags will not need to be handled separately in the
future.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-23-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add Event Trace to the intel-pt-events.py script. This shows how to unpack
the raw data from the new sample events in a Python script.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-22-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Amend the display to include D and t flags in the same way as the x flag.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-21-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Similar to other Intel PT synth events, display changes to the interrupt
flag represented by the MODE.Exec packet.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-20-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Similar to other Intel PT synth events, display Event Trace events recorded
by CFE / EVD packets.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-19-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is not possible to walk the executable code without TNT packets, so
force 'quick' mode when TNT is disabled, because 'quick' mode does not walk
the code.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-18-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Update sample flags to represent the state and changes to the interrupt
flag.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-17-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Synthesize an attribute event and sample events for changes to the
interrupt flag represented by the MODE.Exec packet.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-16-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Synthesize an attribute event and sample events for Intel PT Event Trace
events represented by CFE and EVD packets.
Committer notes:
Make 'struct perf_synth_intel_evd evd[]' evd[0] at the end of 'struct
perf_synth_intel_evt' as it is breaking the build with in many compilers
with (e.g. clang version 13.0.0 (Fedora 13.0.0-3.fc35)):
util/intel-pt.c:2213:31: error: field 'cfe' with variable sized type 'struct perf_synth_intel_evt' not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end]
struct perf_synth_intel_evt cfe;
^
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-15-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The change to the MODE.Exec packet means processing must distinguish
between the old and new cases. Record the Event Trace capability flag to
make that possible.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-14-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add itrace option "I" to synthesize interrupt or similar (asynchronous)
events. This will be used for Intel PT Event Trace events.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-13-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Define 2 new flags to represent:
- when interrupts are disabled (D)
- when interrupt disabling toggles (t)
This gives 4 combinations:
no flag, interrupts enabled
t interrupts were enabled but become disabled
D interrupts are disabled
Dt interrupts were disabled but become enabled
Committer notes:
Those are control flow flags, as per 'tools/perf/Documentation/perf-intel-pt.txt:
<quote>
An interesting field that is not printed by default is 'flags' which can be
displayed as follows:
perf script --itrace=ibxwpe -F+flags
The flags are "bcrosyiABExgh" which stand for branch, call, return, conditional,
system, asynchronous, interrupt, transaction abort, trace begin, trace end,
in transaction, VM-entry, and VM-exit respectively.
</quote>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-12-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Similar to other Intel PT synth events, define a structure to hold
information about a change to the interrupt flag.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Similar to other Intel PT synth events, define structures to hold CFE
and EVD data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As of Intel SDM (https://www.intel.com/sdm) version 076, there is a new
Intel PT feature called Event Trace which adds a bit to the existing
MODE.Exec packet to record the interrupt flag.
Previously, the MODE.Exec packet did not generate any events, so the
new processing required is practically the same as a new packet.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As of Intel SDM (https://www.intel.com/sdm) version 076, there is a new
Intel PT feature called Event Trace which requires 2 new packets CFE
(Control Flow Event) and EVD (Event Data).
Each Event Trace event is represented by a CFE packet that is preceded
by zero or more EVD packets. It may be bound to a following FUP (Flow
Update) packet that provides the IP.
Event Trace exposes details about asynchronous events. The CFE packet
contains a type field to identify one of the following:
1 INTR interrupt, fault, exception, NMI
2 IRET interrupt return
3 SMI system management interrupt
4 RSM resume from system management mode
5 SIPI startup interprocessor interrupt
6 INIT INIT signal
7 VMENTRY VM-Entry
8 VMEXIT VM-Entry
9 VMEXIT_INTR VM-Exit due to interrupt
10 SHUTDOWN Shutdown
For more details, refer to the Intel SDM, Intel Processor Trace chapter.
Add processing to the decoder for the new packets.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out clearing of FUP (Flow Update) event variables, to avoid code duplication.
Committer Notes:
From the Intel documentation:
<quote>
Flow Update Packets (FUP): FUPs provide the source IP addresses for
asynchronous events (interrupt and exceptions), as well as other cases
where the source address cannot be determined from the binary.
</quote>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Do this by extracting the peer labeling per-association logic from
selinux_sctp_assoc_request() into a new helper
selinux_sctp_process_new_assoc() and use this helper in both
selinux_sctp_assoc_request() and selinux_sctp_assoc_established(). This
ensures that the peer labeling behavior as documented in
Documentation/security/SCTP.rst is applied both on the client and server
side:
"""
An SCTP socket will only have one peer label assigned to it. This will be
assigned during the establishment of the first association. Any further
associations on this socket will have their packet peer label compared to
the sockets peer label, and only if they are different will the
``association`` permission be validated. This is validated by checking the
socket peer sid against the received packets peer sid to determine whether
the association should be allowed or denied.
"""
At the same time, it also ensures that the peer label of the association
is set to the correct value, such that if it is peeled off into a new
socket, the socket's peer label will then be set to the association's
peer label, same as it already works on the server side.
While selinux_inet_conn_established() (which we are replacing by
selinux_sctp_assoc_established() for SCTP) only deals with assigning a
peer label to the connection (socket), in case of SCTP we need to also
copy the (local) socket label to the association, so that
selinux_sctp_sk_clone() can then pick it up for the new socket in case
of SCTP peeloff.
Careful readers will notice that the selinux_sctp_process_new_assoc()
helper also includes the "IPv4 packet received over an IPv6 socket"
check, even though it hadn't been in selinux_sctp_assoc_request()
before. While such check is not necessary in
selinux_inet_conn_request() (because struct request_sock's family field
is already set according to the skb's family), here it is needed, as we
don't have request_sock and we take the initial family from the socket.
In selinux_sctp_assoc_established() it is similarly needed as well (and
also selinux_inet_conn_established() already has it).
Fixes: 72e89f5008 ("security: Add support for SCTP security hooks")
Reported-by: Prashanth Prahlad <pprahlad@redhat.com>
Based-on-patch-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Tested-by: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Tidy up config bit constants to use #define.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As of Intel SDM (https://www.intel.com/sdm) version 076, there is a new
Intel PT feature called Event Trace which adds a bit to the existing
MODE.Exec packet to record the interrupt flag. Amend the packet decoder and
packet decoder test accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As of Intel SDM (https://www.intel.com/sdm) version 076, there is a new
Intel PT feature called Event Trace which requires 2 new packets CFE and
EVD. Add them to the packet decoder and packet decoder test.
Committer notes:
I got the "Intel® 64 and IA-32 architectures software developer’s manual
combined volumes: 1, 2A, 2B, 2C, 2D, 3A, 3B, 3C, 3D, and 4" PDF at:
https://cdrdv2.intel.com/v1/dl/getContent/671200
And these new packets are described in page 3951:
<quote>
32.2.4
Event Trace is a capability that exposes details about the asynchronous
events, when they are generated, and when their corresponding software
event handler completes execution. These include:
o Interrupts, including NMI and SMI, including the interrupt vector when
defined.
o Faults, exceptions including the fault vector.
— Page faults additionally include the page fault address, when in context.
o Event handler returns, including IRET and RSM.
o VM exits and VM entries.¹
— VM exits include the values written to the “exit reason” and “exit qualification” VMCS fields.
INIT and SIPI events.
o TSX aborts, including the abort status returned for the RTM instructions.
o Shutdown.
Additionally, it provides indication of the status of the Interrupt Flag
(IF), to indicate when interrupts are masked.
</quote>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make test_data 'static' otherwise it will conflict with any global
variable of the same name.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
security_sctp_assoc_established() is added to replace
security_inet_conn_established() called in
sctp_sf_do_5_1E_ca(), so that asoc can be accessed in security
subsystem and save the peer secid to asoc->peer_secid.
Fixes: 72e89f5008 ("security: Add support for SCTP security hooks")
Reported-by: Prashanth Prahlad <pprahlad@redhat.com>
Based-on-patch-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Tested-by: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Printing the devicetree unittest pass message for each passed test
creates much console verbosity. The existing pass messages are
printed at loglevel KERN_DEBUG so they will not print by default.
Change default to print the pass messages at loglevel PR_INFO so
they will print with the default console loglevel.
The test community expects either a pass or a fail message for each
test in a test suite. The messages are typically post-processed to
report pass/fail results.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220210230819.3303212-1-frowand.list@gmail.com
In cros_typec_remove_partner(), we call
cros_typec_usb_disconnect_state() which sets the switches/muxes to be in
a disconnected state. This also happens in cros_typec_configure_mux().
However, unlike there, here the mux_flags variable hasn't been updated
to reflect that a disconnection has occurred. Update the flag here
accordingly.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/chrome-platform/20220208184721.1697194-5-pmalani@chromium.org/
There are situations where the mux state reported by the Embedded
Controller (EC), might lag the partner "connected" state. So, the mux
state might still suggest that a partner is connected, while the PD
"connected" state, being in Try.SNK (for example) suggests that the
partner is disconnected.
In such a scenario, we will end up sending a disconnect command to the
mux driver, followed by a connect command, since the mux is configured
later. Avoid this by configuring the mux before
registering/disconnecting a partner.
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/chrome-platform/20220208184721.1697194-4-pmalani@chromium.org/
Move the function which gets current mux state inside the
cros_typec_configure_mux() function. It is better to group those
bits of functionality together, and it makes it easier to move around
cros_typec_configure_mux() later.
While we are doing this, also inline the cros_typec_get_mux_info() inside
of cros_typec_configure_mux().
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/chrome-platform/20220208184721.1697194-3-pmalani@chromium.org/
* Read HW interrupt pending state from the HW
x86:
* Don't truncate the performance event mask on AMD
* Fix Xen runstate updates to be atomic when preempting vCPU
* Fix for AMD AVIC interrupt injection race
* Several other AMD fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmIL4G4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNkQQf/Z75dnmdRl8sHHnGjwH2IhWHwAg+h
5O+mJphYt4cvVMexP5dj69b7mHtKMeg/0TxPvPfwCLlhzKkW1gQFwwBAq/YuBCKw
cnMuVPeCSWo6znpS+jYUF4FAJgPKkzfFR9UwYAR5UexSWyOwU8rLcvSxj8vJjO/l
sIke+f767Ks2KgcTMIudObg+vDcgnQXI8n8ztI7hF1WJKYHdTKFkYN7BYRxQ9BW6
4fq51218DhRMv6S7so5dhYC473f+D0t8b5S/Mygur/x6mzsdQJKeOmi8aWGoDa/B
Bmse+X0lHoOkdXaxqpBgQCYeyrXohNcXx7cpGRVFnS45Jf7MLG4OfVHWNQ==
=kD2l
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Read HW interrupt pending state from the HW
x86:
- Don't truncate the performance event mask on AMD
- Fix Xen runstate updates to be atomic when preempting vCPU
- Fix for AMD AVIC interrupt injection race
- Several other AMD fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW
KVM: x86/pmu: Don't truncate the PerfEvtSeln MSR when creating a perf event
KVM: SVM: fix race between interrupt delivery and AVIC inhibition
KVM: SVM: set IRR in svm_deliver_interrupt
KVM: SVM: extract avic_ring_doorbell
selftests: kvm: Remove absent target file
KVM: arm64: vgic: Read HW interrupt pending state from the HW
KVM: x86/xen: Fix runstate updates to be atomic when preempting vCPU
KVM: x86: SVM: move avic definitions from AMD's spec to svm.h
KVM: x86: lapic: don't touch irr_pending in kvm_apic_update_apicv when inhibiting it
KVM: x86: nSVM: deal with L1 hypervisor that intercepts interrupts but lets L2 control them
KVM: x86: nSVM: expose clean bit support to the guest
KVM: x86: nSVM/nVMX: set nested_run_pending on VM entry which is a result of RSM
KVM: x86: nSVM: mark vmcb01 as dirty when restoring SMM saved state
KVM: x86: nSVM: fix potential NULL derefernce on nested migration
KVM: x86: SVM: don't passthrough SMAP/SMEP/PKE bits in !NPT && !gCR0.PG case
Revert "svm: Add warning message for AVIC IPI invalid target"
Paul reports that the ACPI core complains on every boot about a missing
CEDT table. Unlike the standard NUMA tables (SRAT, MADT, and SLIT) that
are critical to NUMA init, CEDT is only expected on CXL platforms. Given
the notice is not actionable lower its severity to debug.
Link: https://lore.kernel.org/r/55f5c077-061c-7e53-b02d-53dde1dd654f@molgen.mpg.de
Fixes: fd49f99c18 ("ACPI: NUMA: Add a node and memblk for each CFMWS not in SRAT")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
