Fix VDPA_ATTR_DEV_NET_CFG_MACADDR assignment to be explicit 64 bit
assignment.
No issue was seen since the value is well below 64 bit max value.
Nevertheless it needs to be fixed.
Fixes: a007d94004 ("vdpa/mlx5: Support configuration of MAC")
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-7-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add netlink support to configure the max virtqueue pairs for a device.
At least one pair is required. The maximum is dictated by the device.
Example:
$ vdpa dev add name vdpa-a mgmtdev auxiliary/mlx5_core.sf.1 max_vqp 4
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-6-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Avoid reading device configuration during feature negotiation. Read
device status and verify that VIRTIO_CONFIG_S_FEATURES_OK is set.
Protect the entire operation, including configuration read with cf_mutex
to ensure integrity of the results.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-5-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Add wrappers to get/set status and protect these operations with
cf_mutex to serialize these operations with respect to get/set config
operations.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-4-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Distribute the available rx virtqueues amongst the available RQT
entries.
RQTs require to have a power of two entries. When creating or modifying
the RQT, use the lowest number of power of two entries that is not less
than the number of rx virtqueues. Distribute them in the available
entries such that some virtqueus may be referenced twice.
This allows to configure any number of virtqueue pairs when multiqueue
is used.
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-3-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Provide an interface to read the negotiated features. This is needed
when building the netlink message in vdpa_dev_net_config_fill().
Also fix the implementation of vdpa_dev_net_config_fill() to use the
negotiated features instead of the device features.
To make APIs clearer, make the following name changes to struct
vdpa_config_ops so they better describe their operations:
get_features -> get_device_features
set_features -> set_driver_features
Finally, add get_driver_features to return the negotiated features and
add implementation to all the upstream drivers.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20220105114646.577224-2-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The return type of get_config_size is size_t so it makes
sense to change the type of the variable holding its result.
That said, this already got taken care of (differently, and arguably
not as well) by commit 3ed21c1451 ("vdpa: check that offsets are
within bounds").
The added 'c->off > size' test in that commit will be done as an
unsigned comparison on 32-bit (safe due to not being signed).
On a 64-bit platform, it will be done as a signed comparison, but in
that case the comparison will be done in 64-bit, and 'c->off' being an
u32 it will be valid thanks to the extended range (ie both values will
be positive in 64 bits).
So this was a real bug, but it was already addressed and marked for stable.
Signed-off-by: Laura Abbott <labbott@kernel.org>
Reported-by: Luo Likang <luolikang@nsfocus.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A recently added error path does not mark ring unused when exiting on
OOM, which will lead to BUG on the next entry in debug builds.
TODO: refactor code so we have START_USE and END_USE in the same function.
Fixes: fc6d70f40b ("virtio_ring: check desc == NULL when using indirect with packed")
Cc: "Xuan Zhuo" <xuanzhuo@linux.alibaba.com>
Cc: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Remove overriding of virtio_version_1_0 which forced the virtqueue
object to version 1.
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20211230142024.142979-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Function name "vp_modern_remove" in comments is written to
"vp_modern_probe" incorrectly. Change it.
Signed-off-by: Dapeng Mi <dapeng1.mi@intel.com>
Link: https://lore.kernel.org/r/20211210073546.700783-1-dapeng1.mi@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
The error message on the failure of pfn check should tell
virtio-pci rather than virtio-mmio, just fix it.
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/ae5e154e-ac59-f0fa-a7c7-091a2201f581@linux.alibaba.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Explicitly remove the file entries from sysfs before dropping the final
reference for symmetry reasons and for consistency with the rest of the
driver.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211201132528.30025-5-johan@kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make sure to always NUL-terminate file names retrieved from the firmware
to avoid accessing data beyond the entry slab buffer and exposing it
through sysfs in case the firmware data is corrupt.
Fixes: 75f3e8e47f ("firmware: introduce sysfs driver for QEMU's fw_cfg device")
Cc: stable@vger.kernel.org # 4.6
Cc: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211201132528.30025-4-johan@kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
An initialised kobject must be freed using kobject_put() to avoid
leaking associated resources (e.g. the object name).
Commit fe3c606843 ("firmware: Fix a reference count leak.") "fixed"
the leak in the first error path of the file registration helper but
left the second one unchanged. This "fix" would however result in a NULL
pointer dereference due to the release function also removing the never
added entry from the fw_cfg_entry_cache list. This has now been
addressed.
Fix the remaining kobject leak by restoring the common error path and
adding the missing kobject_put().
Fixes: 75f3e8e47f ("firmware: introduce sysfs driver for QEMU's fw_cfg device")
Cc: stable@vger.kernel.org # 4.6
Cc: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211201132528.30025-3-johan@kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit fe3c606843 ("firmware: Fix a reference count leak.") "fixed"
a kobject leak in the file registration helper by properly calling
kobject_put() for the entry in case registration of the object fails
(e.g. due to a name collision).
This would however result in a NULL pointer dereference when the
release function tries to remove the never added entry from the
fw_cfg_entry_cache list.
Fix this by moving the list-removal out of the release function.
Note that the offending commit was one of the benign looking umn.edu
fixes which was reviewed but not reverted. [1][2]
[1] https://lore.kernel.org/r/202105051005.49BFABCE@keescook
[2] https://lore.kernel.org/all/YIg7ZOZvS3a8LjSv@kroah.com
Fixes: fe3c606843 ("firmware: Fix a reference count leak.")
Cc: stable@vger.kernel.org # 5.8
Cc: Qiushi Wu <wu000273@umn.edu>
Cc: Kees Cook <keescook@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20211201132528.30025-2-johan@kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since vhost_vdpa_mmap checks for its existence before calling it.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Link: https://lore.kernel.org/r/20211104195248.2088904-1-eperezma@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
It has no sense to call get_status twice, since we already have a
variable for that.
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Link: https://lore.kernel.org/r/20211104195833.2089796-1-eperezma@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
When 'pcim_enable_device()' is used, some resources become automagically
managed.
There is no need to call 'pci_free_irq_vectors()' when the driver is
removed. The same will already be done by 'pcim_release()'.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/02045bdcbbb25f79bae4827f66029cfcddc90381.1636301587.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Make sure to offer VIRTIO_NET_F_MTU since we configure the MTU based on
what was queried from the device.
This allows the virtio driver to allocate large enough buffers based on
the reported MTU.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20211124170949.51725-1-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Let's prepare our fake page onlining code for subblock size smaller than
MAX_ORDER - 1: we might get called for ranges not covering properly
aligned MAX_ORDER - 1 pages. We have to detect the order to use
dynamically.
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20211126134209.17332-3-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Eric Ren <renzhengeek@gmail.com>
Let's prepare our page onlining code for subblock size smaller than
MAX_ORDER - 1: we'll get called for a MAX_ORDER - 1 page but might have
some subblocks in the range plugged and some unplugged. In that case,
fallback to subblock granularity to properly only expose the plugged
parts to the buddy.
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20211126134209.17332-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Eric Ren <renzhengeek@gmail.com>
`driver_override` allows to control which of the vDPA bus drivers
binds to a vDPA device.
If `driver_override` is not set, the previous behaviour is followed:
devices use the first vDPA bus driver loaded (unless auto binding
is disabled).
Tested on Fedora 34 with driverctl(8):
$ modprobe virtio-vdpa
$ modprobe vhost-vdpa
$ modprobe vdpa-sim-net
$ vdpa dev add mgmtdev vdpasim_net name dev1
# dev1 is attached to the first vDPA bus driver loaded
$ driverctl -b vdpa list-devices
dev1 virtio_vdpa
$ driverctl -b vdpa set-override dev1 vhost_vdpa
$ driverctl -b vdpa list-devices
dev1 vhost_vdpa [*]
Note: driverctl(8) integrates with udev so the binding is
preserved.
Suggested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211126164753.181829-3-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add missing documentation of sysfs ABI for vDPA bus in
the new Documentation/ABI/testing/sysfs-bus-vdpa file.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211126164753.181829-2-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This commit fixes a misuse of virtio-net device config size issue
for virtio-block devices.
A new member config_size in struct ifcvf_hw is introduced and would
be initialized through vdpa_dev_add() to record correct device
config size.
To be more generic, rename ifcvf_hw.net_config to ifcvf_hw.dev_config,
the helpers ifcvf_read/write_net_config() to ifcvf_read/write_dev_config()
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Reported-and-suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Fixes: 6ad31d162a ("vDPA/ifcvf: enable Intel C5000X-PL virtio-block for vDPA")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211201081255.60187-1-lingshan.zhu@intel.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
unregister after reset is clearly wrong - device
can be used while it's reset. There's an attempt to
protect against that using hwrng_removed but it
seems racy since access can be in progress
when the flag is set.
Just unregister, then reset seems simpler and cleaner.
NB: we might be able to drop hwrng_removed in a follow-up patch.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will enable cleanups down the road.
The idea is to disable cbs, then add "flush_queued_cbs" callback
as a parameter, this way drivers can flush any work
queued after callbacks have been disabled.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20211013105226.20225-1-mst@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The WA from commit 2a50edbf10 ("drm/amd/display: Apply w/a for hard hang
on HPD") and commit 1bd3bc745e ("drm/amd/display: Extend w/a for hard
hang on HPD to dcn20") causes a regression in s0ix where the system will
fail to resume properly on many laptops. Pull the workarounds out to
avoid that s0ix regression in the common case. This HPD hang happens with
an external device in special circumstances and a new W/A will need to be
developed for this in the future.
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reported-by: Scott Bruce <smbruce@gmail.com>
Reported-by: Chris Hixon <linux-kernel-bugs@hixontech.com>
Reported-by: spasswolf@web.de
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215436
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1821
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1852
Fixes: 2a50edbf10 ("drm/amd/display: Apply w/a for hard hang on HPD")
Fixes: 1bd3bc745e ("drm/amd/display: Extend w/a for hard hang on HPD to dcn20")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support for IP based discovery is in place now so this
check is no longer required.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
eb4fd29afd ("drm/amdgpu: bind to any 0x1002 PCI diplay class device") added
generic bindings to amdgpu so that that it binds to all display class devices
with VID 0x1002 and then rejects those in amdgpu_pci_probe.
Unfortunately it reuses a driver_data value of 0 to detect those new bindings,
which is already used to denote CHIP_TAHITI ASICs.
The driver_data value given to those new bindings was changed in
dd0761fd24ea1 ("drm/amdgpu: set CHIP_IP_DISCOVERY as the asic type by default")
to CHIP_IP_DISCOVERY (=36), but it seems that the check in amdgpu_pci_probe
was forgotten to be changed. Therefore, it still rejects Tahiti GPUs.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1860
Fixes: eb4fd29afd ("drm/amdgpu: bind to any 0x1002 PCI diplay class device")
Signed-off-by: Lukas Fink <lukas.fink1@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It can cause a hang. This is normally not enabled for GPU
hangs on these asics, but was recently enabled for handling
aborted suspends. This causes hangs on some platforms
on suspend.
Fixes: daf8de0874 ("drm/amdgpu: always reset the asic in suspend (v2)")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1858
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The WA from commit 2a50edbf10 ("drm/amd/display: Apply w/a for hard hang
on HPD") and commit 1bd3bc745e ("drm/amd/display: Extend w/a for hard
hang on HPD to dcn20") causes a regression in s0ix where the system will
fail to resume properly on many laptops. Pull the workarounds out to
avoid that s0ix regression in the common case. This HPD hang happens with
an external device in special circumstances and a new W/A will need to be
developed for this in the future.
Cc: stable@vger.kernel.org
Cc: Qingqing Zhuo <qingqing.zhuo@amd.com>
Reported-by: Scott Bruce <smbruce@gmail.com>
Reported-by: Chris Hixon <linux-kernel-bugs@hixontech.com>
Reported-by: spasswolf@web.de
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215436
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1821
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1852
Fixes: 2a50edbf10 ("drm/amd/display: Apply w/a for hard hang on HPD")
Fixes: 1bd3bc745e ("drm/amd/display: Extend w/a for hard hang on HPD to dcn20")
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support for IP based discovery is in place now so this
check is no longer required.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
eb4fd29afd ("drm/amdgpu: bind to any 0x1002 PCI diplay class device") added
generic bindings to amdgpu so that that it binds to all display class devices
with VID 0x1002 and then rejects those in amdgpu_pci_probe.
Unfortunately it reuses a driver_data value of 0 to detect those new bindings,
which is already used to denote CHIP_TAHITI ASICs.
The driver_data value given to those new bindings was changed in
dd0761fd24ea1 ("drm/amdgpu: set CHIP_IP_DISCOVERY as the asic type by default")
to CHIP_IP_DISCOVERY (=36), but it seems that the check in amdgpu_pci_probe
was forgotten to be changed. Therefore, it still rejects Tahiti GPUs.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1860
Fixes: eb4fd29afd ("drm/amdgpu: bind to any 0x1002 PCI diplay class device")
Cc: stable@vger.kernel.org
Signed-off-by: Lukas Fink <lukas.fink1@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It can cause a hang. This is normally not enabled for GPU
hangs on these asics, but was recently enabled for handling
aborted suspends. This causes hangs on some platforms
on suspend.
Fixes: daf8de0874 ("drm/amdgpu: always reset the asic in suspend (v2)")
Cc: stable@vger.kernel.org
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1858
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than opting into GPU recovery support, default to on, and
opt out if it's not working on a particular GPU. This avoids the
need to add new asics to this list since this is a core feature.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add yellow carp to devices which support recovery
Signed-off-by: CHANDAN VURDIGERE NATARAJ <chandan.vurdigerenataraj@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than opting into GPU recovery support, default to on, and
opt out if it's not working on a particular GPU. This avoids the
need to add new asics to this list since this is a core feature.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add yellow carp to devices which support recovery
Signed-off-by: CHANDAN VURDIGERE NATARAJ <chandan.vurdigerenataraj@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dpg_width is being initialized to width but this is never read
as dpg_width is overwritten later on. Remove the redundant
initialization.
Cleans up the following clang-analyzer warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dp.c:6020:8:
warning: Value stored to 'dpg_width' during its initialization is never
read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use "flexible array members" for these cases. The older
style of one-element or zero-length arrays should no longer be used.
Reference:
https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
check null ptr first before access its element
v2: check adev->pm.dpm_enabled early in amdgpu_debugfs_pm_init()
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use ARRAY_SIZE to get array length.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eliminate the following coccicheck warning:
./drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:2725:16-17: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No longer insert ras blocks into ras_list if it already exists in ras_list.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
