- Add interface to load SRIOV cap FW. If the FW does not
exist, simply skip this FW loading routine.
This FW will only be loaded under SRIOV. Other driver
configuration will not be affected.
By adding this interface, it will make us easier to
prepare SRIOV Linux guest driver for different users.
- Update sysfs interface to read cap FW version.
- Refactor PSP FW loading routine under SRIOV to use a
unified SWITCH statement instead of using IF statement
- Remove redundant amdgpu_sriov_vf() check in FW loading
routine
Acked-by: Monk Liu <monk.liu@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cases should be same indentation as switch. Also fix string spanning
across multiple lines.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some suggested cleanups to declutter ttm when doing debug VRAM access over
SDMA.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For better performance during VRAM access for debugged processes, do
read/write copies over SDMA.
In order to fulfill post mortem debugging on a broken device, fallback to
stable MMIO access when gpu recovery is disabled or when job submission
time outs are set to max. Failed SDMA access should automatically fall
back to MMIO access.
Use a pre-allocated GTT bounce buffer pre-mapped into GART to avoid
page-table updates and TLB flushes on access.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Move xgmi special error inject function from amdgpu_ras.c to xgmi block.
2. Support to use psp_ras_trigger_error as default error inject function in amdgpu_ras.c. If .ras_error_inject isn't defined in ras block, default error inject function will take effect.
v2: squash in warning fix (Alex)
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify mca block to fit for the unified ras block data and ops.
2.Define special .ras_block_match function for mca block to identify itself.
3.Change amdgpu_mca_ras_funcs to amdgpu_mca_ras_block(amdgpu_mca_ras had been used), and the corresponding variable name remove _funcs suffix.
4.Remove the const flag of cma ras variable so that cma ras block can be able to be inserted into amdgpu device ras block link list.
5.Invoke amdgpu_ras_register_ras_block function to register cma ras block into amdgpu device ras block link list.
6.Remove the redundant code about cma in amdgpu_ras.c after using the unified ras block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify sdma block to fit for the unified ras block data and ops.
2.Change amdgpu_sdma_ras_funcs to amdgpu_sdma_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of sdma ras variable so that sdma ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register sdma ras block into amdgpu device ras block link list.
5.Remove the redundant code about sdma in amdgpu_ras.c after using the unified ras block.
6.Fill unified ras block .name .block .ras_late_init and .ras_fini for all of sdma versions. If .ras_late_init and .ras_fini had been defined by the selected sdma version, the defined functions will take effect; if not defined, default fill them with amdgpu_sdma_ras_late_init and amdgpu_sdma_ras_fini.
v2: squash in warning fix (Alex)
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify umc block to fit for the unified ras block data and ops.
2.Change amdgpu_umc_ras_funcs to amdgpu_umc_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of umc ras variable so that umc ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register umc ras block into amdgpu device ras block link list.
5.Remove the redundant code about umc in amdgpu_ras.c after using the unified ras block.
6.Fill unified ras block .name .block .ras_late_init and .ras_fini for all of umc versions. If .ras_late_init and .ras_fini had been defined by the selected umc version, the defined functions will take effect; if not defined, default fill them with amdgpu_umc_ras_late_init and amdgpu_umc_ras_fini.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify nbio block to fit for the unified ras block data and ops.
2.Change amdgpu_nbio_ras_funcs to amdgpu_nbio_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of mmhub ras variable so that nbio ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register nbio ras block into amdgpu device ras block link list.
5.Remove the redundant code about nbio in amdgpu_ras.c after using the unified ras block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify mmhub block to fit for the unified ras block data and ops.
2.Change amdgpu_mmhub_ras_funcs to amdgpu_mmhub_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of mmhub ras variable so that mmhub ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register mmhub ras block into amdgpu device ras block link list. 5.Remove the redundant code about mmhub in amdgpu_ras.c after using the unified ras block.
5.Remove the redundant code about mmhub in amdgpu_ras.c after using the unified ras block.
6.Fill unified ras block .name .block .ras_late_init and .ras_fini for all of mmhub versions. If .ras_late_init and .ras_fini had been defined by the selected mmhub version, the defined functions will take effect; if not defined, default fill them with amdgpu_mmhub_ras_late_init and amdgpu_mmhub_ras_fini.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify hdp block to fit for the unified ras block data and ops.
2.Change amdgpu_hdp_ras_funcs to amdgpu_hdp_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of hdp ras variable so that hdp ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register hdp ras block into amdgpu device ras block link list.
5.Remove the redundant code about hdp in amdgpu_ras.c after using the unified ras block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify gmc block to fit for the unified ras block data and ops.
2.Change amdgpu_xgmi_ras_funcs to amdgpu_xgmi_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of gmc ras variable so that gmc ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register gmc ras block into amdgpu device ras block link list.
5.Remove the redundant code about gmc in amdgpu_ras.c after using the unified ras block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Modify gfx block to fit for the unified ras block data and ops.
2.Change amdgpu_gfx_ras_funcs to amdgpu_gfx_ras, and the corresponding variable name remove _funcs suffix.
3.Remove the const flag of gfx ras variable so that gfx ras block can be able to be inserted into amdgpu device ras block link list.
4.Invoke amdgpu_ras_register_ras_block function to register gfx ras block into amdgpu device ras block link list.
5.Remove the redundant code about gfx in amdgpu_ras.c after using the unified ras block.
6.Fill unified ras block .name .block .ras_late_init and .ras_fini for all of gfx versions. If .ras_late_init and .ras_fini had been defined by the selected gfx version, the defined functions will take effect; if not defined, default fill with amdgpu_gfx_ras_late_init and amdgpu_gfx_ras_fini.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Modify the compilation failed problem when other ras blocks' .h include amdgpu_ras.h.
v2: squash in forward declaration warning fix (Alex)
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. Define unified ops interface for each block.
2. Add ras_block_match function pointer in ops interface, each ras block can customize specail match function to identify itself.
3. Add amdgpu_ras_block_match_default new function. If a ras block doesn't define .ras_block_match, default execute amdgpu_ras_block_match_default to identify this ras block.
4. Define unified basic ras block data for each ras block.
5. Create dedicated amdgpu device ras block link list to manage all of the ras blocks.
6. Add amdgpu_ras_register_ras_block new function interface for each ras block to register itself to ras controlling block.
Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: John Clements <john.clements@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On functionality unsupported, -EOPNOTSUPP will be returned. And we rely
on that to determine the fan attributes support.
Fixes: 79c65f3fcb ("drm/amd/pm: do not expose power implementation details to amdgpu_pm.c")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is part of the forced performance level. Move it from
the sysfs handler into amdgpu_dpm_force_performance_level.
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As it's impossible the thermal sensor of KV is one of them.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to compile them on CONFIG_DRM_AMDGPU_SI disabled.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As the only entry point, it's now safe and reasonable to
enforce the lock protections in amdgpu_dpm.c. And with
this, we can drop other internal used power locks.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid cross callings which make lock protection enforcement
on amdgpu_dpm_force_performance_level() impossible.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Those gfxoff controls added for some specific ASICs are unnecessary.
The functionalities are not affected without them. Also to align with
other ASICs, they should also be dropped.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of centralizing all headers in the same folder. Separate them into
different folders and place them among those source files those who really
need them.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can cover the power implementation details. And as what did for
powerplay framework, we hook the smu_context to adev->powerplay.pp_handle.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop those unused APIs and data structures.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of putting them in amdgpu_dpm.c.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop cross callings and multi-function APIs. Also avoid exposing
internal implementations details.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As it lables an internal pm state and amdgpu_pm structure is the more
proper place than amdgpu_device structure for it.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Those APIs are used only by legacy ASICs(si/kv). They cannot be
shared by other ASICs. So, we create a new holder for them.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move it to kv_dpm.c instead.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move them to si_dpm.c instead.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move them to amdgpu_dpm.c instead.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Display is another client of our power APIs. It's not proper to spike
into power implementation details there.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_pm.c holds all the user sysfs/hwmon interfaces. It's another
client of our power APIs. It's not proper to spike into power
implementation details there.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Those implementation details(whether swsmu supported, some ppt_funcs supported,
accessing internal statistics ...)should be kept internally. It's not a good
practice and even error prone to expose implementation details.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Follow the amdgpu change made in
7611750784
and replace local radeon function with is_power_of_2().
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Freesync Video Mode is a experimental feature previously,
and need to be enabled by kernel parameter. We enable it
by default with removing module paramterter in amdgpu_dm.
v2: squash the patches together
Signed-off-by: Solomon Chiu <solomon.chiu@amd.com>
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Unused outside of the file.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fbdev layer is orphaned, but seems to need some care.
So I'd like to step up as new maintainer.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
This event is just specified for SCO and eSCO link types.
On the reception of a HCI_Synchronous_Connection_Complete for a BDADDR
of an existing LE connection, LE link type and a status that triggers the
second case of the packet processing a NULL pointer dereference happens,
as conn->link is NULL.
Signed-off-by: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This selftest covers two aspects of AMX. The first is triggering #NM
exception and checking the MSR XFD_ERR value. The second case is
loading tile config and tile data into guest registers and trapping to
the host side for a complete save/load of the guest state. TMM0
is also checked against memory data after save/restore.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20211223145322.2914028-4-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Those changes can avoid dereferencing pointer compile issue
when amx_test.c reference state->xsave.
Move struct kvm_x86_state definition to processor.h.
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20211223145322.2914028-3-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For AMX support it is recommended to load XCR0 after XFD, so
that KVM does not see XFD=0, XCR=1 for a save state that will
eventually be disabled (which would lead to premature allocation
of the space required for that save state).
It is also required to load XSAVE data after XCR0 and XFD, so
that KVM can trigger allocation of the extra space required to
store AMX state.
Adjust vcpu_load_state to obey these new requirements.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20211223145322.2914028-2-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Always intercepting IA32_XFD causes non-negligible overhead when this
register is updated frequently in the guest.
Disable r/w emulation after intercepting the first WRMSR(IA32_XFD)
with a non-zero value.
Disable WRMSR emulation implies that IA32_XFD becomes out-of-sync
with the software states in fpstate and the per-cpu xfd cache. This
leads to two additional changes accordingly:
- Call fpu_sync_guest_vmexit_xfd_state() after vm-exit to bring
software states back in-sync with the MSR, before handle_exit_irqoff()
is called.
- Always trap #NM once write interception is disabled for IA32_XFD.
The #NM exception is rare if the guest doesn't use dynamic
features. Otherwise, there is at most one exception per guest
task given a dynamic feature.
p.s. We have confirmed that SDM is being revised to say that
when setting IA32_XFD[18] the AMX register state is not guaranteed
to be preserved. This clarification avoids adding mess for a creative
guest which sets IA32_XFD[18]=1 before saving active AMX state to
its own storage.
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220105123532.12586-22-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM can disable the write emulation for the XFD MSR when the vCPU's fpstate
is already correctly sized to reduce the overhead.
When write emulation is disabled the XFD MSR state after a VMEXIT is
unknown and therefore not in sync with the software states in fpstate and
the per CPU XFD cache.
Provide fpu_sync_guest_vmexit_xfd_state() which has to be invoked after a
VMEXIT before enabling interrupts when write emulation is disabled for the
XFD MSR.
It could be invoked unconditionally even when write emulation is enabled
for the price of a pointless MSR read.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220105123532.12586-21-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When KVM_CAP_XSAVE2 is supported, userspace is expected to allocate
buffer for KVM_GET_XSAVE2 and KVM_SET_XSAVE using the size returned
by KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2).
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Guang Zeng <guang.zeng@intel.com>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220105123532.12586-20-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With KVM_CAP_XSAVE, userspace uses a hardcoded 4KB buffer to get/set
xstate data from/to KVM. This doesn't work when dynamic xfeatures
(e.g. AMX) are exposed to the guest as they require a larger buffer
size.
Introduce a new capability (KVM_CAP_XSAVE2). Userspace VMM gets the
required xstate buffer size via KVM_CHECK_EXTENSION(KVM_CAP_XSAVE2).
KVM_SET_XSAVE is extended to work with both legacy and new capabilities
by doing properly-sized memdup_user() based on the guest fpu container.
KVM_GET_XSAVE is kept for backward-compatible reason. Instead,
KVM_GET_XSAVE2 is introduced under KVM_CAP_XSAVE2 as the preferred
interface for getting xstate buffer (4KB or larger size) from KVM
(Link: https://lkml.org/lkml/2021/12/15/510)
Also, update the api doc with the new KVM_GET_XSAVE2 ioctl.
Signed-off-by: Guang Zeng <guang.zeng@intel.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Jing Liu <jing2.liu@intel.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yang Zhong <yang.zhong@intel.com>
Message-Id: <20220105123532.12586-19-yang.zhong@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
