Residual underrun is not an interface error, hence no need to increment
that count.
Fixes: dbf1f53cfd ("scsi: qla2xxx: Implementation to get and manage host, target stats and initiator port")
Cc: stable@vger.kernel.org
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If after an adapter reset the appearance of link is not recovered, the
devices are not rediscovered. This is result of a race condition between
adapter reset (abort_isp) and the topology scan. During adapter reset, the
ABORT_ISP_ACTIVE flag is set. Topology scan usually occurred after adapter
reset. In this case, the topology scan came earlier than usual where it
ran into problem due to ABORT_ISP_ACTIVE flag was still set.
kernel: qla2xxx [0000:13:00.0]-1005:1: Cmd 0x6a aborted with timeout since ISP Abort is pending
kernel: qla2xxx [0000:13:00.0]-28a0:1: MBX_GET_PORT_NAME failed, No FL Port.
kernel: qla2xxx [0000:13:00.0]-286b:1: qla2x00_configure_loop: exiting normally. local port wwpn 51402ec0123d9a80 id 012300)
kernel: qla2xxx [0000:13:00.0]-8017:1: ADAPTER RESET SUCCEEDED nexus=1:0:15.
Allow adapter reset to complete before any scan can start.
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
FCF_ASYNC_SENT flag is used in session management. This flag is cleared in
task management path by accident. Remove unintended flag clearing.
Fixes: 388a49959e ("scsi: qla2xxx: Fix panic from use after free in qla2x00_async_tm_cmd")
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a login failed due to low FW resources, the session can stall and will
not be connected. Reset session state to allow relogin logic to redrive
the connection.
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In large environment, it is possible to experience command timeout and
escalation of path recovery. Currently the driver does not track the number
of exchanges/commands sent to FW. If there is a delay for commands at the
head of the queue, then this will create back pressure for commands at the
back of the queue.
Check for exchange availability before command submission.
Fixes: 89c72f4245 ("scsi: qla2xxx: Add IOCB resource tracking")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following message and call trace was seen with debug kernels:
DMA-API: qla2xxx 0000:41:00.0: device driver failed to check map
error [device address=0x00000002a3ff38d8] [size=1024 bytes] [mapped as
single]
WARNING: CPU: 0 PID: 2930 at kernel/dma/debug.c:1017
check_unmap+0xf42/0x1990
Call Trace:
debug_dma_unmap_page+0xc9/0x100
qla_nvme_ls_unmap+0x141/0x210 [qla2xxx]
Remove DMA mapping from the driver altogether, as it is already done by FC
layer. This prevents the warning.
Fixes: c85ab7d9e2 ("scsi: qla2xxx: Fix missed DMA unmap for NVMe ls requests")
Cc: stable@vger.kernel.org
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
User experienced symptoms of adapter failure in NPIV environment. NPIV
hosts were allowed to trigger chip reset back to back due to NPIV link
state being slow to come online.
Fix link failure in NPIV environment by removing NPIV host from directly
being able to perform chip reset.
kernel: qla2xxx [0000:04:00.1]-6009:261: Loop down - aborting ISP.
kernel: qla2xxx [0000:04:00.1]-6009:262: Loop down - aborting ISP.
kernel: qla2xxx [0000:04:00.1]-6009:281: Loop down - aborting ISP.
kernel: qla2xxx [0000:04:00.1]-6009:285: Loop down - aborting ISP
Fixes: 0d6e61bc6a ("[SCSI] qla2xxx: Correct various NPIV issues.")
Cc: stable@vger.kernel.org
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
CT Ping and ELS cmds fail for NVMe targets. Check if port is online before
sending ELS instead of sending login.
Cc: stable@vger.kernel.org
Signed-off-by: Shreyas Deodhar <sdeodhar@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add driver code for Unisoc UFS host controller, along with UFS
initialization.
Signed-off-by: Zhe Wang <zhe.wang1@unisoc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Magnus Karlsson says:
====================
This is a patch set of various performance improvements, fixes, and
the introduction of more than one XDP program to the xsk selftests
framework so we can test more things in the future such as upcoming
multi-buffer and metadata support for AF_XDP. The new programs just
reuse the framework that all the other eBPF selftests use. The new
feature is used to implement one new test that does XDP_DROP on every
other packet. More tests using this will be added in future commits.
Contents:
* The run-time of the test suite is cut by 10x when executing the
tests on a real NIC, by only attaching the XDP program once per mode
tested, instead of once per test program.
* Over 700 lines of code have been removed. The xsk.c control file was
moved straight over from libbpf when the xsk support was deprecated
there. As it is now not used as library code that has to work with
all kinds of versions of Linux, a lot of code could be dropped or
simplified.
* Add a new command line option "-d" that can be used when a test
fails and you want to debug it with gdb or some other debugger. The
option creates the two veth netdevs and prints them to the screen
without deleting them afterwards. This way these veth netdevs can be
used when running xskxceiver in a debugger.
* Implemented the possibility to load external XDP programs so we can
have more than the default one. This feature is used to implement a
test where every other packet is dropped. Good exercise for the
recycling mechanism of the xsk buffer pool used in zero-copy mode.
* Various clean-ups and small fixes in patches 1 to 5. None of these
fixes has any impact on the correct execution of the tests when they
pass, though they can be irritating when a test fails. IMHO, they do
not need to go to bpf as they will not fix anything there. The first
version of patches 1, 2, and 4 where previously sent to bpf, but has
now been included here.
v2 -> v3:
* Fixed compilation error for llvm [David]
* Made the function xsk_is_in_drv_mode(ifobj) more generic by changing
it to xsk_is_in_mode(ifobj, xdp_mode) [Maciej]
* Added Maciej's acks to all the patches
v1 -> v2:
* Fixed spelling error in commit message of patch #6 [Björn]
* Added explanation on why it is safe to use C11 atomics in patch #7
[Daniel]
* Put all XDP programs in the same file so that adding more XDP
programs to xskxceiver.c becomes more scalable in patches #11 and
#12 [Maciej]
* Removed more dead code in patch #8 [Maciej]
* Removed stale %s specifier in error print, patch #9 [Maciej]
* Changed name of XDP_CONSUMES_SOME_PACKETS to XDP_DROP_HALF to
hopefully make it clearer [Maciej]
* ifobj_rx and ifobj_tx name changes in patch #13 [Maciej]
* Simplified XDP attachment code in patch #15 [Maciej]
Patches:
1-5: Small fixes and clean-ups
6: New convenient debug option when using a debugger such as gdb
7-8: Removal of unnecessary code
9: Add the ability to load external XDP programs
10-11: Removal of more unnecessary code
12: Implement a new test where every other packet is XDP_DROP:ed
13: Unify the thread dispatching code
14-15: Simplify the way tests are written when using custom packet_streams
or custom XDP programs
Thanks: Magnus
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement automatic switching of XDP programs and execution modes if
needed by a test. This makes it much simpler to write a test as it
only has to say what XDP program it needs if it is not the default
one. This also makes it possible to remove the initial explicit
attachment of the XDP program as well as the explicit mode switch in
the code. These are now handled by the same code that just checks if a
switch is necessary, so no special cases are needed.
The default XDP program for all tests is one that sends all packets to
the AF_XDP socket. If you need another one, please use the new
function test_spec_set_xdp_prog() to specify what XDP programs and
maps to use for this test.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-16-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Automatically restore the default packet stream if needed at the end
of each test. This so that test writers do not forget to do this.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-15-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make the thread dispatching code common by unifying the dual and
single thread dispatcher code. This so we do not have to add code in
two places in upcoming commits.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-14-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new test where some of the packets are not passed to the AF_XDP
socket and instead get a XDP_DROP verdict. This is important as it
tests the recycling mechanism of the buffer pool. If a packet is not
sent to the AF_XDP socket, the buffer the packet resides in is instead
recycled so it can be used again without the round-trip to user
space. The test introduces a new XDP program that drops every other
packet.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-13-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Get rid of the built-in XDP program that was part of the old libbpf
code in xsk.c and replace it with an eBPF program build using the
framework by all the other bpf selftests. This will form the base for
adding more programs in later commits.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-12-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove unnecessary code in the control path. This is located in the
file xsk.c that was moved from libbpf when the xsk support there was
deprecated. Some of the code there is not needed anymore as the
selftests are only guaranteed to run on the kernel it is shipped
with. Therefore, all the code that has to deal with compatibility of
older kernels can be dropped and also any other function that is not
of any use for the tests.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-11-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Load and attach the XDP program only once per XDP mode that is being
executed. Today, the XDP program is loaded and attached for every
test, then unloaded, which takes a long time on real NICs, since they
have to reconfigure their HW, in contrast to veth. The test suite now
completes in 21 seconds, instead of 207 seconds previously on my
machine. This is a speed-up of around 10x.
This is accomplished by moving the XDP loading from the worker threads
to the main thread and replacing the XDP loading interfaces of xsk.c
that was taken from the xsk support in libbpf, with something more
explicit that is more useful for these tests. Instead, the relevant
file descriptors and ifindexes are just passed down to the new
functions.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-10-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove the namespaces used as they fill no function. This will
simplify the code for speeding up the tests in the following commits.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-9-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace our own homegrown assembly store/release and load/acquire
implementations with the HW agnositic atomic APIs C11 offers. This to
make the code more portable, easier to read, and reduce the
maintenance burden.
The original code used load-acquire and store-release barriers
hand-coded in assembly. Since C11, these kind of operations are
offered as built-ins in gcc and llvm. The load-acquire operation
prevents hoisting of non-atomic memory operations to before this
operation and it corresponds to the __ATOMIC_ACQUIRE operation in the
built-in atomics. The store-release operation prevents hoisting of
non-atomic memory operations to after this operation and it
corresponds to the __ATOMIC_RELEASE operation in the built-in atomics.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-8-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new option to the test_xsk.sh script that only creates the two
veth netdevs and the extra namespace, then exits without running any
tests. The failed test can then be executed in the debugger without
having to create the netdevs and namespace manually. For ease-of-use,
the veth netdevs to use are printed so they can be copied into the
debugger.
Here is an example how to use it:
> sudo ./test_xsk.sh -d
veth10 veth11
> gdb xskxceiver
In gdb:
run -i veth10 -i veth11
And now the test cases can be debugged with gdb.
If you want to debug the test suite on a real NIC in loopback mode,
there is no need to use this feature as you already know the netdev of
your NIC.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-7-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Print the correct error codes when exiting the test suite due to some
terminal error. Some of these had a switched sign and some of them
printed zero instead of errno.
Fixes: facb7cb2e9 ("selftests/bpf: Xsk selftests - SKB POLL, NOPOLL")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-5-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Submit the correct number of frames in the function
xsk_populate_fill_ring(). For the tests that set the flag
use_addr_for_fill, uninitialized buffers were sent to the fill ring
following the correct ones. This has no impact on the tests, since
they only use the ones that were initialized. But for correctness,
this should be fixed.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-4-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Do not close descriptors that have never been used. File descriptor
fields that are not in use are erroneously marked with the number 0,
which is a valid fd. Mark unused fds with -1 instead and do not close
these when deleting the socket.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-3-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Print the correct payload when the packet dump option is selected. The
network to host conversion was forgotten and the payload was
erronously declared to be an int instead of an unsigned int.
Fixes: facb7cb2e9 ("selftests/bpf: Xsk selftests - SKB POLL, NOPOLL")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-2-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The ability to subscript match result as an array is only available
since python 3.6. Existing code in bpf_doc uses the older group()
interface but commit 8a76145a2e adds code using the new interface.
Use the old interface consistently to avoid build error on older
distributions like the below:
+ make -j48 -s -C /dev/shm/kbuild/linux.33946/current ARCH=powerpc HOSTCC=gcc CROSS_COMPILE=powerpc64-suse-linux- clean
TypeError: '_sre.SRE_Match' object is not subscriptable
Fixes: 8a76145a2e ("bpf: explicitly define BPF_FUNC_xxx integer values")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230109113442.20946-1-msuchanek@suse.de
Fix the help text for the PRINTK_SAFE_LOG_BUF_SHIFT setting.
Link: https://lkml.kernel.org/r/20230109201837.23873-1-eliasfleckenstein@web.de
Signed-off-by: Lizzy Fleckenstein <eliasfleckenstein@web.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During the maple tree conversion of nommu, an error in counting the VMAs
was introduced by counting the existing VMA again. The counting used to
be decremented by one and incremented by two, but now it only increments
by two. Fix the counting error by moving the increment outside the
setup_vma_to_mm() function to the callers.
Link: https://lkml.kernel.org/r/20230109205809.956325-1-Liam.Howlett@oracle.com
Fixes: 8220543df1 ("nommu: remove uses of VMA linked list")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When removing a VMA from the tree fails due to no memory, do not free the
VMA since a reference still exists.
Link: https://lkml.kernel.org/r/20230109205708.956103-1-Liam.Howlett@oracle.com
Fixes: 8220543df1 ("nommu: remove uses of VMA linked list")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The preallocation of the maple tree nodes may leak if the error path to
"error_just_free" is taken. Fix this by moving the freeing of the maple
tree nodes to a shared location for all error paths.
Link: https://lkml.kernel.org/r/20230109205507.955577-1-Liam.Howlett@oracle.com
Fixes: 8220543df1 ("nommu: remove uses of VMA linked list")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update the email address for Robert's maintainer entries and fill in
.mailmap accordingly.
Link: https://lkml.kernel.org/r/20230106152151.115648-1-robert.foss@linaro.org
Signed-off-by: Robert Foss <rfoss@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Kirill Tkhai <tkhai@ya.ru>
Cc: Qais Yousef <qyousef@layalina.io>
Cc: Vasily Averin <vasily.averin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
vsyscall detection code uses direct call to the beginning of
the vsyscall page:
asm ("call %P0" :: "i" (0xffffffffff600000))
It generates "call rel32" instruction but it is not relocated if binary
is PIE, so binary segfaults into random userspace address and vsyscall
page status is detected incorrectly.
Do more direct:
asm ("call *%rax")
which doesn't do need any relocaltions.
Mark g_vsyscall as volatile for a good measure, I didn't find instruction
setting it to 0. Now the code is obviously correct:
xor eax, eax
mov rdi, rbp
mov rsi, rbp
mov DWORD PTR [rip+0x2d15], eax # g_vsyscall = 0
mov rax, 0xffffffffff600000
call rax
mov DWORD PTR [rip+0x2d02], 1 # g_vsyscall = 1
mov eax, DWORD PTR ds:0xffffffffff600000
mov DWORD PTR [rip+0x2cf1], 2 # g_vsyscall = 2
mov edi, [rip+0x2ceb] # exit(g_vsyscall)
call exit
Note: fixed proc-empty-vm test oopses 5.19.0-28-generic kernel
but this is separate story.
Link: https://lkml.kernel.org/r/Y7h2xvzKLg36DSq8@p183
Fixes: 5bc73bb345 ("proc: test how it holds up with mapping'less process")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The rename from mm->mmap_sem to mm->mmap_lock was performed in commit
da1c55f1b2 ("mmap locking API: rename mmap_sem to mmap_lock") and commit
c1e8d7c6a7 ("map locking API: convert mmap_sem comments"), however some
incorrect comments remain.
This patch simply corrects those comments which are obviously incorrect
within mm itself.
Link: https://lkml.kernel.org/r/33fba04389ab63fc4980e7ba5442f521df6dc657.1673048927.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 449c796768 ("mm: teach release_pages() to take an array of
encoded page pointers too") added the kernel doc comment for
release_pages() on top of 'union release_pages_arg', so making 'make
htmldocs' complains as below:
./include/linux/mm.h:1268: warning: cannot understand function prototype: 'typedef union '
The kernel doc comment for the function is already on top of the
function's definition in mm/swap.c, and the new comment is actually not
for the function but indeed release_pages_arg. Fixing the comment to
reflect the intent would be one option. But, kernel doc cannot parse
the union as below due to the attribute.
./include/linux/mm.h:1272: error: Cannot parse struct or union!
Modify the comment to reflect the intent but do not mark it as a kernel
doc comment.
Link: https://lkml.kernel.org/r/20230106203331.127532-1-sj@kernel.org
Fixes: 449c796768 ("mm: teach release_pages() to take an array of encoded page pointers too")
Signed-off-by: SeongJae Park <sj@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Don't use kernel-doc "/**" notation for non-kernel-doc comments.
Prevents a kernel-doc warning:
lib/win_minmax.c:31: warning: expecting prototype for lib/minmax.c(). Prototype was for minmax_subwin_update() instead
Link: https://lkml.kernel.org/r/20230102211614.26343-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mark kasan_kunit_executing as static, as it is only used within
mm/kasan/report.c.
Link: https://lkml.kernel.org/r/f64778a4683b16a73bba72576f73bf4a2b45a82f.1672794398.git.andreyknvl@google.com
Fixes: c8c7016f50 ("kasan: fail non-kasan KUnit tests on KASAN reports")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If nilfs2 reads a corrupted disk image and tries to reads a b-tree node
block by calling __nilfs_btree_get_block() against an invalid virtual
block address, it returns -ENOENT because conversion of the virtual block
address to a disk block address fails. However, this return value is the
same as the internal code that b-tree lookup routines return to indicate
that the block being searched does not exist, so functions that operate on
that b-tree may misbehave.
When nilfs_btree_insert() receives this spurious 'not found' code from
nilfs_btree_do_lookup(), it misunderstands that the 'not found' check was
successful and continues the insert operation using incomplete lookup path
data, causing the following crash:
general protection fault, probably for non-canonical address
0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
...
RIP: 0010:nilfs_btree_get_nonroot_node fs/nilfs2/btree.c:418 [inline]
RIP: 0010:nilfs_btree_prepare_insert fs/nilfs2/btree.c:1077 [inline]
RIP: 0010:nilfs_btree_insert+0x6d3/0x1c10 fs/nilfs2/btree.c:1238
Code: bc 24 80 00 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 28 00 74 08 4c 89
ff e8 4b 02 92 fe 4d 8b 3f 49 83 c7 28 4c 89 f8 48 c1 e8 03 <42> 80 3c
28 00 74 08 4c 89 ff e8 2e 02 92 fe 4d 8b 3f 49 83 c7 02
...
Call Trace:
<TASK>
nilfs_bmap_do_insert fs/nilfs2/bmap.c:121 [inline]
nilfs_bmap_insert+0x20d/0x360 fs/nilfs2/bmap.c:147
nilfs_get_block+0x414/0x8d0 fs/nilfs2/inode.c:101
__block_write_begin_int+0x54c/0x1a80 fs/buffer.c:1991
__block_write_begin fs/buffer.c:2041 [inline]
block_write_begin+0x93/0x1e0 fs/buffer.c:2102
nilfs_write_begin+0x9c/0x110 fs/nilfs2/inode.c:261
generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772
__generic_file_write_iter+0x176/0x400 mm/filemap.c:3900
generic_file_write_iter+0xab/0x310 mm/filemap.c:3932
call_write_iter include/linux/fs.h:2186 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x7dc/0xc50 fs/read_write.c:584
ksys_write+0x177/0x2a0 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
...
</TASK>
This patch fixes the root cause of this problem by replacing the error
code that __nilfs_btree_get_block() returns on block address conversion
failure from -ENOENT to another internal code -EINVAL which means that the
b-tree metadata is corrupted.
By returning -EINVAL, it propagates without glitches, and for all relevant
b-tree operations, functions in the upper bmap layer output an error
message indicating corrupted b-tree metadata via
nilfs_bmap_convert_error(), and code -EIO will be eventually returned as
it should be.
Link: https://lkml.kernel.org/r/000000000000bd89e205f0e38355@google.com
Link: https://lkml.kernel.org/r/20230105055356.8811-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+ede796cecd5296353515@syzkaller.appspotmail.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Writeback has been implemented for zsmalloc, so this warning no longer
holds.
Link: https://lkml.kernel.org/r/20230106220016.172303-1-nphamcs@gmail.com
Fixes: 9997bc0175 ("zsmalloc: implement writeback mechanism for zsmalloc")
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Userfaultfd-wp uses pte markers to mark wr-protected pages for both shmem
and hugetlb. Shmem has pre-allocation ready for markers, but hugetlb path
was overlooked.
Doing so by calling huge_pte_alloc() if the initial pgtable walk fails to
find the huge ptep. It's possible that huge_pte_alloc() can fail with
high memory pressure, in that case stop the loop immediately and fail
silently. This is not the most ideal solution but it matches with what we
do with shmem meanwhile it avoids the splat in dmesg.
Link: https://lkml.kernel.org/r/20230104225207.1066932-2-peterx@redhat.com
Fixes: 60dfaad65a ("mm/hugetlb: allow uffd wr-protect none ptes")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: James Houghton <jthoughton@google.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: James Houghton <jthoughton@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org> [5.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
PMD sharing can only be done in PUD_SIZE-aligned pieces of VMAs; however,
it is possible that HugeTLB VMAs are split without unsharing the PMDs
first.
Without this fix, it is possible to hit the uffd-wp-related WARN_ON_ONCE
in hugetlb_change_protection [1]. The key there is that
hugetlb_unshare_all_pmds will not attempt to unshare PMDs in
non-PUD_SIZE-aligned sections of the VMA.
It might seem ideal to unshare in hugetlb_vm_op_open, but we need to
unshare in both the new and old VMAs, so unsharing in hugetlb_vm_op_split
seems natural.
[1]: https://lore.kernel.org/linux-mm/CADrL8HVeOkj0QH5VZZbRzybNE8CG-tEGFshnA+bG9nMgcWtBSg@mail.gmail.com/
Link: https://lkml.kernel.org/r/20230104231910.1464197-1-jthoughton@google.com
Fixes: 6dfeaff93b ("hugetlb/userfaultfd: unshare all pmds for hugetlbfs when register wp")
Signed-off-by: James Houghton <jthoughton@google.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
free_anon_vma_name() is missing a check for anonymous shmem VMA which
leads to a memory leak due to refcount not being dropped. Fix this by
calling anon_vma_name_put() unconditionally. It will free vma->anon_name
whenever it's non-NULL.
Link: https://lkml.kernel.org/r/20230105000241.1450843-1-surenb@google.com
Fixes: d09e8ca6cb ("mm: anonymous shared memory naming")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reported-by: syzbot+91edf9178386a07d06a7@syzkaller.appspotmail.com
Cc: Hugh Dickins <hughd@google.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
SHMEM_HUGE_DENY is for emergency use by the admin, to disable allocation
of shmem huge pages if, for example, a dangerous bug is found in their
usage: see "deny" in Documentation/mm/transhuge.rst. An app using
madvise(,,MADV_COLLAPSE) should not be allowed to override it: restore its
precedence over shmem_huge_force.
Restore SHMEM_HUGE_DENY precedence over MADV_COLLAPSE.
Link: https://lkml.kernel.org/r/20221224082035.3197140-2-zokeefe@google.com
Fixes: 7c6c6cc4d3 ("mm/shmem: add flag to enforce shmem THP in hugepage_vma_check()")
Signed-off-by: Zach O'Keefe <zokeefe@google.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
MADV_COLLAPSE acts on one hugepage-aligned/sized region at a time, until
it has collapsed all eligible memory contained within the bounds supplied
by the user.
At the top of each hugepage iteration we (re)lock mmap_lock and
(re)validate the VMA for eligibility and update variables that might have
changed while mmap_lock was dropped. One thing that might occur is that
the VMA could be resized, and as such, we refetch vma->vm_end to make sure
we don't collapse past the end of the VMA's new end.
However, it's possible that when refetching vma->vm_end that we expand the
region acted on by MADV_COLLAPSE if vma->vm_end is greater than size+len
supplied by the user.
The consequence here is that we may attempt to collapse more memory than
requested, possibly yielding either "too much success" or "false failure"
user-visible results. An example of the former is if we MADV_COLLAPSE the
first 4MiB of a 2TiB mmap()'d file, the incorrect refetch would cause the
operation to block for much longer than anticipated as we attempt to
collapse the entire TiB region. An example of the latter is that applying
MADV_COLLPSE to a 4MiB file mapped to the start of a 6MiB VMA will
successfully collapse the first 4MiB, then incorrectly attempt to collapse
the last hugepage-aligned/sized region -- fail (since readahead/page cache
lookup will fail) -- and report a failure to the user.
I don't believe there is a kernel stability concern here as we always
(re)validate the VMA / region accordingly. Also as Hugh mentions, the
user-visible effects are: we try to collapse more memory than requested
by the user, and/or failing an operation that should have otherwise
succeeded. An example is trying to collapse a 4MiB file contained
within a 12MiB VMA.
Don't expand the acted-on region when refetching vma->vm_end.
Link: https://lkml.kernel.org/r/20221224082035.3197140-1-zokeefe@google.com
Fixes: 4d24de9425 ("mm: MADV_COLLAPSE: refetch vm_end after reacquiring mmap_lock")
Signed-off-by: Zach O'Keefe <zokeefe@google.com>
Reported-by: Hugh Dickins <hughd@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, we don't enable writenotify when enabling userfaultfd-wp on a
shared writable mapping (for now only shmem and hugetlb). The consequence
is that vma->vm_page_prot will still include write permissions, to be set
as default for all PTEs that get remapped (e.g., mprotect(), NUMA hinting,
page migration, ...).
So far, vma->vm_page_prot is assumed to be a safe default, meaning that we
only add permissions (e.g., mkwrite) but not remove permissions (e.g.,
wrprotect). For example, when enabling softdirty tracking, we enable
writenotify. With uffd-wp on shared mappings, that changed. More details
on vma->vm_page_prot semantics were summarized in [1].
This is problematic for uffd-wp: we'd have to manually check for a uffd-wp
PTEs/PMDs and manually write-protect PTEs/PMDs, which is error prone.
Prone to such issues is any code that uses vma->vm_page_prot to set PTE
permissions: primarily pte_modify() and mk_pte().
Instead, let's enable writenotify such that PTEs/PMDs/... will be mapped
write-protected as default and we will only allow selected PTEs that are
definitely safe to be mapped without write-protection (see
can_change_pte_writable()) to be writable. In the future, we might want
to enable write-bit recovery -- e.g., can_change_pte_writable() -- at more
locations, for example, also when removing uffd-wp protection.
This fixes two known cases:
(a) remove_migration_pte() mapping uffd-wp'ed PTEs writable, resulting
in uffd-wp not triggering on write access.
(b) do_numa_page() / do_huge_pmd_numa_page() mapping uffd-wp'ed PTEs/PMDs
writable, resulting in uffd-wp not triggering on write access.
Note that do_numa_page() / do_huge_pmd_numa_page() can be reached even
without NUMA hinting (which currently doesn't seem to be applicable to
shmem), for example, by using uffd-wp with a PROT_WRITE shmem VMA. On
such a VMA, userfaultfd-wp is currently non-functional.
Note that when enabling userfaultfd-wp, there is no need to walk page
tables to enforce the new default protection for the PTEs: we know that
they cannot be uffd-wp'ed yet, because that can only happen after enabling
uffd-wp for the VMA in general.
Also note that this makes mprotect() on ranges with uffd-wp'ed PTEs not
accidentally set the write bit -- which would result in uffd-wp not
triggering on later write access. This commit makes uffd-wp on shmem
behave just like uffd-wp on anonymous memory in that regard, even though,
mixing mprotect with uffd-wp is controversial.
[1] https://lkml.kernel.org/r/92173bad-caa3-6b43-9d1e-9a471fdbc184@redhat.com
Link: https://lkml.kernel.org/r/20221209080912.7968-1-david@redhat.com
Fixes: b1f9e87686 ("mm/uffd: enable write protection for shmem & hugetlbfs")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Ives van Hoorne <ives@codesandbox.io>
Debugged-by: Peter Xu <peterx@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
uprobe_write_opcode() uses collapse_pte_mapped_thp() to restore huge pmd,
when removing a breakpoint from hugepage text: vma->anon_vma is always set
in that case, so undo the prohibition. And MADV_COLLAPSE ought to be able
to collapse some page tables in a vma which happens to have anon_vma set
from CoWing elsewhere.
Is anon_vma lock required? Almost not: if any page other than expected
subpage of the non-anon huge page is found in the page table, collapse is
aborted without making any change. However, it is possible that an anon
page was CoWed from this extent in another mm or vma, in which case a
concurrent lookup might look here: so keep it away while clearing pmd (but
perhaps we shall go back to using pmd_lock() there in future).
Note that collapse_pte_mapped_thp() is exceptional in freeing a page table
without having cleared its ptes: I'm uneasy about that, and had thought
pte_clear()ing appropriate; but exclusive i_mmap lock does fix the
problem, and we would have to move the mmu_notification if clearing those
ptes.
What this fixes is not a dangerous instability. But I suggest Cc stable
because uprobes "healing" has regressed in that way, so this should follow
8d3c106e19 into those stable releases where it was backported (and may
want adjustment there - I'll supply backports as needed).
Link: https://lkml.kernel.org/r/b740c9fb-edba-92ba-59fb-7a5592e5dfc@google.com
Fixes: 8d3c106e19 ("mm/khugepaged: take the right locks for page table retraction")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: <stable@vger.kernel.org> [5.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We have to update the uffd-wp SWP PTE bit independent of the type of
migration entry. Currently, if we're unlucky and we want to install/clear
the uffd-wp bit just while we're migrating a read-only mapped hugetlb
page, we would miss to set/clear the uffd-wp bit.
Further, if we're processing a readable-exclusive migration entry and
neither want to set or clear the uffd-wp bit, we could currently end up
losing the uffd-wp bit. Note that the same would hold for writable
migrating entries, however, having a writable migration entry with the
uffd-wp bit set would already mean that something went wrong.
Note that the change from !is_readable_migration_entry ->
writable_migration_entry is harmless and actually cleaner, as raised by
Miaohe Lin and discussed in [1].
[1] https://lkml.kernel.org/r/90dd6a93-4500-e0de-2bf0-bf522c311b0c@huawei.com
Link: https://lkml.kernel.org/r/20221222205511.675832-3-david@redhat.com
Fixes: 60dfaad65a ("mm/hugetlb: allow uffd wr-protect none ptes")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/hugetlb: uffd-wp fixes for hugetlb_change_protection()".
Playing with virtio-mem and background snapshots (using uffd-wp) on
hugetlb in QEMU, I managed to trigger a VM_BUG_ON(). Looking into the
details, hugetlb_change_protection() seems to not handle uffd-wp correctly
in all cases.
Patch #1 fixes my test case. I don't have reproducers for patch #2, as it
requires running into migration entries.
I did not yet check in detail yet if !hugetlb code requires similar care.
This patch (of 2):
There are two problematic cases when stumbling over a PTE marker in
hugetlb_change_protection():
(1) We protect an uffd-wp PTE marker a second time using uffd-wp: we will
end up in the "!huge_pte_none(pte)" case and mess up the PTE marker.
(2) We unprotect a uffd-wp PTE marker: we will similarly end up in the
"!huge_pte_none(pte)" case even though we cleared the PTE, because
the "pte" variable is stale. We'll mess up the PTE marker.
For example, if we later stumble over such a "wrongly modified" PTE marker,
we'll treat it like a present PTE that maps some garbage page.
This can, for example, be triggered by mapping a memfd backed by huge
pages, registering uffd-wp, uffd-wp'ing an unmapped page and (a)
uffd-wp'ing it a second time; or (b) uffd-unprotecting it; or (c)
unregistering uffd-wp. Then, ff we trigger fallocate(FALLOC_FL_PUNCH_HOLE)
on that file range, we will run into a VM_BUG_ON:
[ 195.039560] page:00000000ba1f2987 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x0
[ 195.039565] flags: 0x7ffffc0001000(reserved|node=0|zone=0|lastcpupid=0x1fffff)
[ 195.039568] raw: 0007ffffc0001000 ffffe742c0000008 ffffe742c0000008 0000000000000000
[ 195.039569] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
[ 195.039569] page dumped because: VM_BUG_ON_PAGE(compound && !PageHead(page))
[ 195.039573] ------------[ cut here ]------------
[ 195.039574] kernel BUG at mm/rmap.c:1346!
[ 195.039579] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 195.039581] CPU: 7 PID: 4777 Comm: qemu-system-x86 Not tainted 6.0.12-200.fc36.x86_64 #1
[ 195.039583] Hardware name: LENOVO 20WNS1F81N/20WNS1F81N, BIOS N35ET50W (1.50 ) 09/15/2022
[ 195.039584] RIP: 0010:page_remove_rmap+0x45b/0x550
[ 195.039588] Code: [...]
[ 195.039589] RSP: 0018:ffffbc03c3633ba8 EFLAGS: 00010292
[ 195.039591] RAX: 0000000000000040 RBX: ffffe742c0000000 RCX: 0000000000000000
[ 195.039592] RDX: 0000000000000002 RSI: ffffffff8e7aac1a RDI: 00000000ffffffff
[ 195.039592] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffbc03c3633a08
[ 195.039593] R10: 0000000000000003 R11: ffffffff8f146328 R12: ffff9b04c42754b0
[ 195.039594] R13: ffffffff8fcc6328 R14: ffffbc03c3633c80 R15: ffff9b0484ab9100
[ 195.039595] FS: 00007fc7aaf68640(0000) GS:ffff9b0bbf7c0000(0000) knlGS:0000000000000000
[ 195.039596] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 195.039597] CR2: 000055d402c49110 CR3: 0000000159392003 CR4: 0000000000772ee0
[ 195.039598] PKRU: 55555554
[ 195.039599] Call Trace:
[ 195.039600] <TASK>
[ 195.039602] __unmap_hugepage_range+0x33b/0x7d0
[ 195.039605] unmap_hugepage_range+0x55/0x70
[ 195.039608] hugetlb_vmdelete_list+0x77/0xa0
[ 195.039611] hugetlbfs_fallocate+0x410/0x550
[ 195.039612] ? _raw_spin_unlock_irqrestore+0x23/0x40
[ 195.039616] vfs_fallocate+0x12e/0x360
[ 195.039618] __x64_sys_fallocate+0x40/0x70
[ 195.039620] do_syscall_64+0x58/0x80
[ 195.039623] ? syscall_exit_to_user_mode+0x17/0x40
[ 195.039624] ? do_syscall_64+0x67/0x80
[ 195.039626] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 195.039628] RIP: 0033:0x7fc7b590651f
[ 195.039653] Code: [...]
[ 195.039654] RSP: 002b:00007fc7aaf66e70 EFLAGS: 00000293 ORIG_RAX: 000000000000011d
[ 195.039655] RAX: ffffffffffffffda RBX: 0000558ef4b7f370 RCX: 00007fc7b590651f
[ 195.039656] RDX: 0000000018000000 RSI: 0000000000000003 RDI: 000000000000000c
[ 195.039657] RBP: 0000000008000000 R08: 0000000000000000 R09: 0000000000000073
[ 195.039658] R10: 0000000008000000 R11: 0000000000000293 R12: 0000000018000000
[ 195.039658] R13: 00007fb8bbe00000 R14: 000000000000000c R15: 0000000000001000
[ 195.039661] </TASK>
Fix it by not going into the "!huge_pte_none(pte)" case if we stumble over
an exclusive marker. spin_unlock() + continue would get the job done.
However, instead, make it clearer that there are no fall-through
statements: we process each case (hwpoison, migration, marker, !none,
none) and then unlock the page table to continue with the next PTE. Let's
avoid "continue" statements and use a single spin_unlock() at the end.
Link: https://lkml.kernel.org/r/20221222205511.675832-1-david@redhat.com
Link: https://lkml.kernel.org/r/20221222205511.675832-2-david@redhat.com
Fixes: 60dfaad65a ("mm/hugetlb: allow uffd wr-protect none ptes")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
stress_hpt_timer_fn() is only used in hash_utils.c, make it static.
Fixes: 6b34a099fa ("powerpc/64s/hash: add stress_hpt kernel boot option to increase hash faults")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221228093603.3166599-1-yangyingliang@huawei.com
