The current logic, regardless of whether CONFIG_BLK_DEV_ZONED
is enabled or not, will judge whether discard_unit is SECTION,
when f2fs_sb_has_blkzoned.
In fact, when CONFIG_BLK_DEV_ZONED is not enabled, this judgment
is a path that will never be accessed. At this time, -EINVAL will
be returned in the parse_options function, accompanied by the
message "Zoned block device support is not enabled".
Let's wrap this discard_unit judgment with CONFIG_BLK_DEV_ZONED.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We can start freeing cluster page(s) from which compression
is not used. It will get better performance.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The SA8540P PMICs are named PMM8540. Rename the devicetree source labels
to reflect this.
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Eric Chanudet <echanude@redhat.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111160335.7175-3-johan+linaro@kernel.org
Add the missing interrupt-controller include which is needed by the RTC
node.
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Eric Chanudet <echanude@redhat.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111160335.7175-2-johan+linaro@kernel.org
>From now on, f2fs also has its own patchwork link, thanks to Jaegeuk
for starting this tool!
Let's update it to f2fs entry.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Enable the eDP display on MDSS0 DP3, including backlight control.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111133128.31813-1-johan+linaro@kernel.org
The SA8295P ADP has, among other interfaces, six MiniDP connectors which
are connected to MDSS0 DP2 and DP3, and MDSS1 DP0 through DP3.
Enable Display Clock controllers, MDSS instanced, MDPs, DP controllers,
DP PHYs and link them all together.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111035906.2975494-4-quic_bjorande@quicinc.com
The SC8280XP CRD has a EDP display on MDSS0 DP3, enable relevant nodes
and link it together with the backlight control.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111035906.2975494-3-quic_bjorande@quicinc.com
The commit 79417d040f ("btrfs: zoned: disable metadata overcommit for
zoned") disabled the metadata over-commit to track active zones properly.
However, it also introduced a heavy overhead by allocating new metadata
block groups and/or flushing dirty buffers to release the space
reservations. Specifically, a workload (write only without any sync
operations) worsen its performance from 343.77 MB/sec (v5.19) to 182.89
MB/sec (v6.0).
The performance is still bad on current misc-next which is 187.95 MB/sec.
And, with this patch applied, it improves back to 326.70 MB/sec (+73.82%).
This patch introduces a new fs_info->flag BTRFS_FS_NO_OVERCOMMIT to
indicate it needs to disable the metadata over-commit. The flag is enabled
when a device with max active zones limit is loaded into a file-system.
Fixes: 79417d040f ("btrfs: zoned: disable metadata overcommit for zoned")
CC: stable@vger.kernel.org # 6.0+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There are some reports from the mailing list that since v6.1 kernel, the
WARN_ON() inside btrfs_qgroup_account_extent() gets triggered during
rescan:
WARNING: CPU: 3 PID: 6424 at fs/btrfs/qgroup.c:2756 btrfs_qgroup_account_extents+0x1ae/0x260 [btrfs]
CPU: 3 PID: 6424 Comm: snapperd Tainted: P OE 6.1.2-1-default #1 openSUSE Tumbleweed 05c7a1b1b61d5627475528f71f50444637b5aad7
RIP: 0010:btrfs_qgroup_account_extents+0x1ae/0x260 [btrfs]
Call Trace:
<TASK>
btrfs_commit_transaction+0x30c/0xb40 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6]
? start_transaction+0xc3/0x5b0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6]
btrfs_qgroup_rescan+0x42/0xc0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6]
btrfs_ioctl+0x1ab9/0x25c0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6]
? __rseq_handle_notify_resume+0xa9/0x4a0
? mntput_no_expire+0x4a/0x240
? __seccomp_filter+0x319/0x4d0
__x64_sys_ioctl+0x90/0xd0
do_syscall_64+0x5b/0x80
? syscall_exit_to_user_mode+0x17/0x40
? do_syscall_64+0x67/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fd9b790d9bf
</TASK>
[CAUSE]
Since commit e15e9f43c7 ("btrfs: introduce
BTRFS_QGROUP_RUNTIME_FLAG_NO_ACCOUNTING to skip qgroup accounting"), if
our qgroup is already in inconsistent state, we will no longer do the
time-consuming backref walk.
This can leave some qgroup records without a valid old_roots ulist.
Normally this is fine, as btrfs_qgroup_account_extents() would also skip
those records if we have NO_ACCOUNTING flag set.
But there is a small window, if we have NO_ACCOUNTING flag set, and
inserted some qgroup_record without a old_roots ulist, but then the user
triggered a qgroup rescan.
During btrfs_qgroup_rescan(), we firstly clear NO_ACCOUNTING flag, then
commit current transaction.
And since we have a qgroup_record with old_roots = NULL, we trigger the
WARN_ON() during btrfs_qgroup_account_extents().
[FIX]
Unfortunately due to the introduction of NO_ACCOUNTING flag, the
assumption that every qgroup_record would have its old_roots populated
is no longer correct.
Fix the false alerts and drop the WARN_ON().
Reported-by: Lukas Straub <lukasstraub2@web.de>
Reported-by: HanatoK <summersnow9403@gmail.com>
Fixes: e15e9f43c7 ("btrfs: introduce BTRFS_QGROUP_RUNTIME_FLAG_NO_ACCOUNTING to skip qgroup accounting")
CC: stable@vger.kernel.org # 6.1
Link: https://lore.kernel.org/linux-btrfs/2403c697-ddaf-58ad-3829-0335fc89df09@gmail.com/
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When test case btrfs/219 (aka, mount a registered device but with a lower
generation) failed, there is not any useful information for the end user
to find out what's going wrong.
The mount failure just looks like this:
# mount -o loop /tmp/219.img2 /mnt/btrfs/
mount: /mnt/btrfs: mount(2) system call failed: File exists.
dmesg(1) may have more information after failed mount system call.
While the dmesg contains nothing but the loop device change:
loop1: detected capacity change from 0 to 524288
[CAUSE]
In device_list_add() we have a lot of extra checks to reject invalid
cases.
That function also contains the regular device scan result like the
following prompt:
BTRFS: device fsid 6222333e-f9f1-47e6-b306-55ddd4dcaef4 devid 1 transid 8 /dev/loop0 scanned by systemd-udevd (3027)
But unfortunately not all errors have their own error messages, thus if
we hit something wrong in device_add_list(), there may be no error
messages at all.
[FIX]
Add errors message for all non-ENOMEM errors.
For ENOMEM, I'd say we're in a much worse situation, and there should be
some OOM messages way before our call sites.
CC: stable@vger.kernel.org # 6.0+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Use the irq_domain_alloc_irqs() wrapper instead of the full
__irq_domain_alloc_irqs() interface, which was only intended for some
legacy (x86) use cases.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221213140844.15470-2-johan+linaro@kernel.org
With the introduction of threaded interrupt handlers, it is virtually
never safe to call disable_irq() from non-premptible context.
Thus: Update the documentation, add an explicit might_sleep() to catch any
offenders. This is more obvious and straight forward than the implicit
might_sleep() check deeper down in the disable_irq() call chain.
Fixes: 3aa551c9b4 ("genirq: add threaded interrupt handler support")
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221216150441.200533-3-manfred@colorfullife.com
Documentation/virt/kvm/locking.rst tells us that kvm->lock is taken outside
vcpu->mutex. But that doesn't actually happen very often; it's only in
some esoteric cases like migration with AMD SEV. This means that lockdep
usually doesn't notice, and doesn't do its job of keeping us honest.
Ensure that lockdep *always* knows about the ordering of these two locks,
by briefly taking vcpu->mutex in kvm_vm_ioctl_create_vcpu() while kvm->lock
is held.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20230111180651.14394-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The kvm_xen_update_runstate_guest() function can be called when the vCPU
is being scheduled out, from a preempt notifier. It *opportunistically*
updates the runstate area in the guest memory, if the gfn_to_pfn_cache
which caches the appropriate address is still valid.
If there is *contention* when it attempts to obtain gpc->lock, then
locking inside the priority inheritance checks may cause a deadlock.
Lockdep reports:
[13890.148997] Chain exists of:
&gpc->lock --> &p->pi_lock --> &rq->__lock
[13890.149002] Possible unsafe locking scenario:
[13890.149003] CPU0 CPU1
[13890.149004] ---- ----
[13890.149005] lock(&rq->__lock);
[13890.149007] lock(&p->pi_lock);
[13890.149009] lock(&rq->__lock);
[13890.149011] lock(&gpc->lock);
[13890.149013]
*** DEADLOCK ***
In the general case, if there's contention for a read lock on gpc->lock,
that's going to be because something else is either invalidating or
revalidating the cache. Either way, we've raced with seeing it in an
invalid state, in which case we would have aborted the opportunistic
update anyway.
So in the 'atomic' case when called from the preempt notifier, just
switch to using read_trylock() and avoid the PI handling altogether.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20230111180651.14394-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In commit 5ec3289b31 ("KVM: x86/xen: Compatibility fixes for shared runstate
area") we declared it safe to obtain two gfn_to_pfn_cache locks at the same
time:
/*
* The guest's runstate_info is split across two pages and we
* need to hold and validate both GPCs simultaneously. We can
* declare a lock ordering GPC1 > GPC2 because nothing else
* takes them more than one at a time.
*/
However, we forgot to tell lockdep. Do so, by setting a subclass on the
first lock before taking the second.
Fixes: 5ec3289b31 ("KVM: x86/xen: Compatibility fixes for shared runstate area")
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20230111180651.14394-1-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Fix the PMCR_EL0 reset value after the PMU rework
- Correctly handle S2 fault triggered by a S1 page table walk
by not always classifying it as a write, as this breaks on
R/O memslots
- Document why we cannot exit with KVM_EXIT_MMIO when taking
a write fault from a S1 PTW on a R/O memslot
- Put the Apple M2 on the naughty step for not being able to
correctly implement the vgic SEIS feature, just liek the M1
before it
- Reviewer updates: Alex is stepping down, replaced by Zenghui
-----BEGIN PGP SIGNATURE-----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=XBtQ
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm64 fixes for 6.2, take #1
- Fix the PMCR_EL0 reset value after the PMU rework
- Correctly handle S2 fault triggered by a S1 page table walk
by not always classifying it as a write, as this breaks on
R/O memslots
- Document why we cannot exit with KVM_EXIT_MMIO when taking
a write fault from a S1 PTW on a R/O memslot
- Put the Apple M2 on the naughty step for not being able to
correctly implement the vgic SEIS feature, just liek the M1
before it
- Reviewer updates: Alex is stepping down, replaced by Zenghui
The nanosleep syscalls use the restart_block mechanism, with a quirk:
The `type` and `rmtp`/`compat_rmtp` fields are set up unconditionally on
syscall entry, while the rest of the restart_block is only set up in the
unlikely case that the syscall is actually interrupted by a signal (or
pseudo-signal) that doesn't have a signal handler.
If the restart_block was set up by a previous syscall (futex(...,
FUTEX_WAIT, ...) or poll()) and hasn't been invalidated somehow since then,
this will clobber some of the union fields used by futex_wait_restart() and
do_restart_poll().
If userspace afterwards wrongly calls the restart_syscall syscall,
futex_wait_restart()/do_restart_poll() will read struct fields that have
been clobbered.
This doesn't actually lead to anything particularly interesting because
none of the union fields contain trusted kernel data, and
futex(..., FUTEX_WAIT, ...) and poll() aren't syscalls where it makes much
sense to apply seccomp filters to their arguments.
So the current consequences are just of the "if userspace does bad stuff,
it can damage itself, and that's not a problem" flavor.
But still, it seems like a hazard for future developers, so invalidate the
restart_block when partly setting it up in the nanosleep syscalls.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230105134403.754986-1-jannh@google.com
kvm->srcu is taken in KVM_RUN and several other vCPU ioctls, therefore
vcpu->mutex is susceptible to the same deadlock that is documented
for kvm->slots_lock. The same holds for kvm->lock, since kvm->lock
is held outside vcpu->mutex. Fix the documentation and rearrange it
to highlight the difference between these locks and kvm->slots_arch_lock,
and how kvm->slots_arch_lock can be useful while processing a vmexit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Refactor i2s clock values based on hw_params and use srate and
bclk_ratio variables in clock enable API instead hard-code values.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20230109132104.1259479-4-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
when using same cpu dai for 2 different dai links
below error is reported.
error: can't find BE for DAI ACPHS_VIRTUAL1.OUT
To avoid this error add new cpu dai.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://lore.kernel.org/r/20230109132104.1259479-2-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the offset + length goes over the ethernet + vlan header, then the
length is adjusted to copy the bytes that are within the boundaries of
the vlan_ethhdr scratchpad area. The remaining bytes beyond ethernet +
vlan header are copied directly from the skbuff data area.
Fix incorrect arithmetic operator: subtract, not add, the size of the
vlan header in case of double-tagged packets to adjust the length
accordingly to address CVE-2023-0179.
Reported-by: Davide Ornaghi <d.ornaghi97@gmail.com>
Fixes: f6ae9f120d ("netfilter: nft_payload: add C-VLAN support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When first_ip is 0, last_ip is 0xFFFFFFFF, and netmask is 31, the value of
an arithmetic expression 2 << (netmask - mask_bits - 1) is subject
to overflow due to a failure casting operands to a larger data type
before performing the arithmetic.
Note that it's harmless since the value will be checked at the next step.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: b9fed74818 ("netfilter: ipset: Check and reject crazy /0 input parameters")
Signed-off-by: Ilia.Gavrilov <Ilia.Gavrilov@infotecs.ru>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The kselftest framework uses a default timeout of 45 seconds for
all test scripts.
Increase the timeout to two minutes for the netfilter tests, this
should hopefully be enough,
Make sure that, should the script be canceled, the net namespace and
the spawned ping instances are removed.
Fixes: 25d8bcedbf ("selftests: add script to stress-test nft packet path vs. control plane")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Convert MDIO bus multiplexer/glue of Amlogic G12a SoC family bindings
to dt-schema.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use
that instead and delete the custom DSI write macro defined in the driver.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-12-javierm@redhat.com
There are macros for these already in the <drm/drm_mipi_dsi.h> header, use
that instead and delete the custom DSI write macros defined in the driver.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-3-javierm@redhat.com
This is more efficient than iter_iov.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[axboe: fold in iovec assumption fix]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a match has been made to the nth duplicate symbol, return
success not error.
Example:
Before:
$ cat file.c
cat: file.c: No such file or directory
$ cat file1.c
#include <stdio.h>
static void func(void)
{
printf("First func\n");
}
void other(void);
int main()
{
func();
other();
return 0;
}
$ cat file2.c
#include <stdio.h>
static void func(void)
{
printf("Second func\n");
}
void other(void)
{
func();
}
$ gcc -Wall -Wextra -o test file1.c file2.c
$ perf record -e intel_pt//u --filter 'filter func @ ./test' -- ./test
Multiple symbols with name 'func'
#1 0x1149 l func
which is near main
#2 0x1179 l func
which is near other
Disambiguate symbol name by inserting #n after the name e.g. func #2
Or select a global symbol by inserting #0 or #g or #G
Failed to parse address filter: 'filter func @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
$ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
Failed to parse address filter: 'filter func #2 @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
After:
$ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
First func
Second func
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data ]
$ perf script --itrace=b -Ftime,flags,ip,sym,addr --ns
1231062.526977619: tr strt 0 [unknown] => 558495708179 func
1231062.526977619: tr end call 558495708188 func => 558495708050 _init
1231062.526979286: tr strt 0 [unknown] => 55849570818d func
1231062.526979286: tr end return 55849570818f func => 55849570819d other
Fixes: 1b36c03e35 ("perf record: Add support for using symbols in address filters")
Reported-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230110185659.15979-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
During kexec on ARM device, we notice that device_shutdown() only calls
pm_runtime_force_suspend() while shutting down the GPU. This means the GPU
kthread is still running and further, there maybe active submits.
This causes all kinds of issues during a kexec reboot:
Warning from shutdown path:
[ 292.509662] WARNING: CPU: 0 PID: 6304 at [...] adreno_runtime_suspend+0x3c/0x44
[ 292.509863] Hardware name: Google Lazor (rev3 - 8) with LTE (DT)
[ 292.509872] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 292.509881] pc : adreno_runtime_suspend+0x3c/0x44
[ 292.509891] lr : pm_generic_runtime_suspend+0x30/0x44
[ 292.509905] sp : ffffffc014473bf0
[...]
[ 292.510043] Call trace:
[ 292.510051] adreno_runtime_suspend+0x3c/0x44
[ 292.510061] pm_generic_runtime_suspend+0x30/0x44
[ 292.510071] pm_runtime_force_suspend+0x54/0xc8
[ 292.510081] adreno_shutdown+0x1c/0x28
[ 292.510090] platform_shutdown+0x2c/0x38
[ 292.510104] device_shutdown+0x158/0x210
[ 292.510119] kernel_restart_prepare+0x40/0x4c
And here from GPU kthread, an SError OOPs:
[ 192.648789] el1h_64_error+0x7c/0x80
[ 192.648812] el1_interrupt+0x20/0x58
[ 192.648833] el1h_64_irq_handler+0x18/0x24
[ 192.648854] el1h_64_irq+0x7c/0x80
[ 192.648873] local_daif_inherit+0x10/0x18
[ 192.648900] el1h_64_sync_handler+0x48/0xb4
[ 192.648921] el1h_64_sync+0x7c/0x80
[ 192.648941] a6xx_gmu_set_oob+0xbc/0x1fc
[ 192.648968] a6xx_hw_init+0x44/0xe38
[ 192.648991] msm_gpu_hw_init+0x48/0x80
[ 192.649013] msm_gpu_submit+0x5c/0x1a8
[ 192.649034] msm_job_run+0xb0/0x11c
[ 192.649058] drm_sched_main+0x170/0x434
[ 192.649086] kthread+0x134/0x300
[ 192.649114] ret_from_fork+0x10/0x20
Fix by calling adreno_system_suspend() in the device_shutdown() path.
[ Applied Rob Clark feedback on fixing adreno_unbind() similarly, also
tested as above. ]
Cc: Rob Clark <robdclark@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ricardo Ribalda <ribalda@chromium.org>
Cc: Ross Zwisler <zwisler@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/517633/
Link: https://lore.kernel.org/r/20230109222547.1368644-1-joel@joelfernandes.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Since commit 80b6093b55 ("kbuild: add -Wundef to KBUILD_CPPFLAGS
for W=1 builds"), building with W=1 detects -Wundef warnings for
assembly code.
$ make W=1 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- arch/arm/mm/
[snip]
AS arch/arm/mm/cache-v7.o
In file included from arch/arm/mm/cache-v7.S:17:
arch/arm/mm/proc-macros.S:109:5: warning: "L_PTE_SHARED" is not defined, evaluates to 0 [-Wundef]
109 | #if L_PTE_SHARED != PTE_EXT_SHARED
| ^~~~~~~~~~~~
arch/arm/mm/proc-macros.S:109:21: warning: "PTE_EXT_SHARED" is not defined, evaluates to 0 [-Wundef]
109 | #if L_PTE_SHARED != PTE_EXT_SHARED
| ^~~~~~~~~~~~~~
arch/arm/mm/proc-macros.S:113:10: warning: "L_PTE_XN" is not defined, evaluates to 0 [-Wundef]
113 | (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
| ^~~~~~~~
arch/arm/mm/proc-macros.S:113:19: warning: "L_PTE_USER" is not defined, evaluates to 0 [-Wundef]
113 | (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
| ^~~~~~~~~~
arch/arm/mm/proc-macros.S:113:30: warning: "L_PTE_RDONLY" is not defined, evaluates to 0 [-Wundef]
113 | (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
| ^~~~~~~~~~~~
arch/arm/mm/proc-macros.S:113:43: warning: "L_PTE_DIRTY" is not defined, evaluates to 0 [-Wundef]
113 | (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
| ^~~~~~~~~~~
arch/arm/mm/proc-macros.S:113:55: warning: "L_PTE_YOUNG" is not defined, evaluates to 0 [-Wundef]
113 | (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
| ^~~~~~~~~~~
arch/arm/mm/proc-macros.S:114:10: warning: "L_PTE_PRESENT" is not defined, evaluates to 0 [-Wundef]
114 | L_PTE_PRESENT) > L_PTE_SHARED
| ^~~~~~~~~~~~~
arch/arm/mm/proc-macros.S:114:27: warning: "L_PTE_SHARED" is not defined, evaluates to 0 [-Wundef]
114 | L_PTE_PRESENT) > L_PTE_SHARED
| ^~~~~~~~~~~~
Include <asm/pgtable.h> from proc-macros.S to fix the warnings.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
