Pull yet more updates from Andrew Morton:
"54 patches.
Subsystems affected by this patch series: lib, mm (slub, secretmem,
cleanups, init, pagemap, and mremap), and debug"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (54 commits)
powerpc/mm: enable HAVE_MOVE_PMD support
powerpc/book3s64/mm: update flush_tlb_range to flush page walk cache
mm/mremap: allow arch runtime override
mm/mremap: hold the rmap lock in write mode when moving page table entries.
mm/mremap: use pmd/pud_poplulate to update page table entries
mm/mremap: don't enable optimized PUD move if page table levels is 2
mm/mremap: convert huge PUD move to separate helper
selftest/mremap_test: avoid crash with static build
selftest/mremap_test: update the test to handle pagesize other than 4K
mm: rename p4d_page_vaddr to p4d_pgtable and make it return pud_t *
mm: rename pud_page_vaddr to pud_pgtable and make it return pmd_t *
kdump: use vmlinux_build_id to simplify
buildid: fix kernel-doc notation
buildid: mark some arguments const
scripts/decode_stacktrace.sh: indicate 'auto' can be used for base path
scripts/decode_stacktrace.sh: silence stderr messages from addr2line/nm
scripts/decode_stacktrace.sh: support debuginfod
x86/dumpstack: use %pSb/%pBb for backtrace printing
arm64: stacktrace: use %pSb for backtrace printing
module: add printk formats to add module build ID to stacktraces
...
Improve the bindings and make them more usable:
- Pick in spi-cpha and spi-cpol from the SPI node parent,
this will specify that we are "type 3" in the device tree
rather than hardcoding it in the operating system.
- Drop the u32 ref from the SPI frequency: comes in from
the SPI host bindings.
- Make spi-cpha, spi-cpol and port compulsory.
- Update the example with a real-world SPI controller,
spi-gpio.
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701213618.3818821-1-linus.walleij@linaro.org
As of commit c7289b1c8a ("arm64: tegra: Enable SMMU support on
Tegra194"), SMMU support is enabled system-wide on Tegra194. However,
there was a bit of overlap between the SMMU enablement and the USB
support addition, so the USB device tree nodes are missing the iommus
and interconnects properties. This in turn leads to SMMU faults for
these devices, since by default the ARM SMMU will fault.
Add the iommus and interconnects properties to the XUSB and XUDC device
tree nodes to restore their functionality.
Fixes: c7289b1c8a ("arm64: tegra: Enable SMMU support on Tegra194")
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add iommus and interconnects properties to the sound device tree node on
Tegra194. This ensures that the correct SID is used for translation of
physical to I/O virtual addresses and that the path to system memory is
properly described, which in turn can impact the range of memory that
the device can address.
Fixes: c7289b1c8a ("arm64: tegra: Enable SMMU support on Tegra194")
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Data transfers are not required to be block aligned in memory, so they
span two pages. Fix this by splitting the call to >sff_data_xfer into
two for that case.
This has been broken since the initial libata import before the damn
of git, but was uncovered by the legacy ide driver removal.
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210709130237.3730959-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Colin reports that Coverity complains about checking for poll being
non-zero after having dereferenced it multiple times. This is a valid
complaint, and actually a leftover from back when this code was based
on the aio poll code.
Kill the redundant check.
Link: https://lore.kernel.org/io-uring/fe70c532-e2a7-3722-58a1-0fa4e5c5ff2c@canonical.com/
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Do not give a warning for the eDP panels if the "bus_format" is
not specified, since most eDP panels can support more than one
bus formats and this can be auto-detected.
Also, update the check to include bpc=10 for the eDP panel.
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1624726268-14869-5-git-send-email-rajeevny@codeaurora.org
If there is no backlight specified in the device tree and the panel
has access to the DP AUX channel then create a DP AUX backlight if
supported by the panel.
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1624726268-14869-3-git-send-email-rajeevny@codeaurora.org
Some panels support backlight control over DP AUX channel using
VESA's standard backlight control interface.
Using new DRM eDP backlight helpers, add support to create and
register a backlight for those panels in drm_panel to simplify
the panel drivers.
The panel driver with access to "struct drm_dp_aux" can create and
register a backlight device using following code snippet in its
probe() function:
err = drm_panel_dp_aux_backlight(panel, aux);
if (err)
return err;
Then drm_panel will handle backlight_(enable|disable) calls
similar to the case when drm_panel_of_backlight() is used.
Currently, we are not supporting one feature where the source
device can combine the backlight brightness levels set through
DP AUX and the BL_PWM_DIM eDP connector pin. Since it's not
required for the basic backlight controls, it can be added later.
Signed-off-by: Rajeev Nandan <rajeevny@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[dianders: added blank line for warning when applying]
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1624726268-14869-2-git-send-email-rajeevny@codeaurora.org
- Fix a MIPS bug where irqdomain loopkups could occur in a context
where RCU is not allowed
- Fix a documentation bug for handle_domain_irq
-----BEGIN PGP SIGNATURE-----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=eTw3
-----END PGP SIGNATURE-----
Merge tag 'irqchip-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Fix a MIPS bug where irqdomain loopkups could occur in a context
where RCU is not allowed
- Fix a documentation bug for handle_domain_irq
Accessing raw timers (currently only CLOCK_MONOTONIC_RAW) through VDSO
doesn't return the correct time when using the GIC as clock source.
The address of the GIC mapped page is in this case not calculated
correctly. The GIC mapped page is calculated from the VDSO data by
subtracting PAGE_SIZE:
void *get_gic(const struct vdso_data *data) {
return (void __iomem *)data - PAGE_SIZE;
}
However, the data pointer is not page aligned for raw clock sources.
This is because the VDSO data for raw clock sources (CS_RAW = 1) is
stored after the VDSO data for coarse clock sources (CS_HRES_COARSE = 0).
Therefore, only the VDSO data for CS_HRES_COARSE is page aligned:
+--------------------+
| |
| vd[CS_RAW] | ---+
| vd[CS_HRES_COARSE] | |
+--------------------+ | -PAGE_SIZE
| | |
| GIC mapped page | <--+
| |
+--------------------+
When __arch_get_hw_counter() is called with &vd[CS_RAW], get_gic returns
the wrong address (somewhere inside the GIC mapped page). The GIC counter
values are not returned which results in an invalid time.
Fixes: a7f4df4e21 ("MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime()")
Signed-off-by: Martin Fäcknitz <faecknitz@hotsplots.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When allocations fails that can be NULL now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Tested-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Tested-by: Roberto Sassu <roberto.sassu@huawei.com>
Fixes: bfa3357ef9 ("drm/ttm: allocate resource object instead of embedding it v2")
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708114710.8186-1-christian.koenig@amd.com
This adds some extra noise to the tailcall_bpf2bpf4 tests that will cause
verify to patch insns. This then moves around subprog start/end insn
index and poke descriptor insn index to ensure that verify and JIT will
continue to track these correctly.
If done correctly verifier should pass this program same as before and
JIT should emit tail call logic.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210707223848.14580-3-john.fastabend@gmail.com
Subprograms are calling map_poke_track(), but on program release there is no
hook to call map_poke_untrack(). However, on program release, the aux memory
(and poke descriptor table) is freed even though we still have a reference to
it in the element list of the map aux data. When we run map_poke_run(), we then
end up accessing free'd memory, triggering KASAN in prog_array_map_poke_run():
[...]
[ 402.824689] BUG: KASAN: use-after-free in prog_array_map_poke_run+0xc2/0x34e
[ 402.824698] Read of size 4 at addr ffff8881905a7940 by task hubble-fgs/4337
[ 402.824705] CPU: 1 PID: 4337 Comm: hubble-fgs Tainted: G I 5.12.0+ #399
[ 402.824715] Call Trace:
[ 402.824719] dump_stack+0x93/0xc2
[ 402.824727] print_address_description.constprop.0+0x1a/0x140
[ 402.824736] ? prog_array_map_poke_run+0xc2/0x34e
[ 402.824740] ? prog_array_map_poke_run+0xc2/0x34e
[ 402.824744] kasan_report.cold+0x7c/0xd8
[ 402.824752] ? prog_array_map_poke_run+0xc2/0x34e
[ 402.824757] prog_array_map_poke_run+0xc2/0x34e
[ 402.824765] bpf_fd_array_map_update_elem+0x124/0x1a0
[...]
The elements concerned are walked as follows:
for (i = 0; i < elem->aux->size_poke_tab; i++) {
poke = &elem->aux->poke_tab[i];
[...]
The access to size_poke_tab is a 4 byte read, verified by checking offsets
in the KASAN dump:
[ 402.825004] The buggy address belongs to the object at ffff8881905a7800
which belongs to the cache kmalloc-1k of size 1024
[ 402.825008] The buggy address is located 320 bytes inside of
1024-byte region [ffff8881905a7800, ffff8881905a7c00)
The pahole output of bpf_prog_aux:
struct bpf_prog_aux {
[...]
/* --- cacheline 5 boundary (320 bytes) --- */
u32 size_poke_tab; /* 320 4 */
[...]
In general, subprograms do not necessarily manage their own data structures.
For example, BTF func_info and linfo are just pointers to the main program
structure. This allows reference counting and cleanup to be done on the latter
which simplifies their management a bit. The aux->poke_tab struct, however,
did not follow this logic. The initial proposed fix for this use-after-free
bug further embedded poke data tracking into the subprogram with proper
reference counting. However, Daniel and Alexei questioned why we were treating
these objects special; I agree, its unnecessary. The fix here removes the per
subprogram poke table allocation and map tracking and instead simply points
the aux->poke_tab pointer at the main programs poke table. This way, map
tracking is simplified to the main program and we do not need to manage them
per subprogram.
This also means, bpf_prog_free_deferred(), which unwinds the program reference
counting and kfrees objects, needs to ensure that we don't try to double free
the poke_tab when free'ing the subprog structures. This is easily solved by
NULL'ing the poke_tab pointer. The second detail is to ensure that per
subprogram JIT logic only does fixups on poke_tab[] entries it owns. To do
this, we add a pointer in the poke structure to point at the subprogram value
so JITs can easily check while walking the poke_tab structure if the current
entry belongs to the current program. The aux pointer is stable and therefore
suitable for such comparison. On the jit_subprogs() error path, we omit
cleaning up the poke->aux field because these are only ever referenced from
the JIT side, but on error we will never make it to the JIT, so its fine to
leave them dangling. Removing these pointers would complicate the error path
for no reason. However, we do need to untrack all poke descriptors from the
main program as otherwise they could race with the freeing of JIT memory from
the subprograms. Lastly, a748c6975d ("bpf: propagate poke descriptors to
subprograms") had an off-by-one on the subprogram instruction index range
check as it was testing 'insn_idx >= subprog_start && insn_idx <= subprog_end'.
However, subprog_end is the next subprogram's start instruction.
Fixes: a748c6975d ("bpf: propagate poke descriptors to subprograms")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210707223848.14580-2-john.fastabend@gmail.com
Since d4a45c68dc ("irqdomain: Protect the linear revmap with RCU"),
any irqdomain lookup requires the RCU read lock to be held.
This assumes that the architecture code will be structured such as
irq_enter() will be called *before* the interrupt is looked up
in the irq domain. However, this isn't the case for MIPS, and a number
of drivers are structured to do it the other way around when handling
an interrupt in their root irqchip (secondary irqchips are OK by
construction).
This results in a RCU splat on a lockdep-enabled kernel when the kernel
takes an interrupt from idle, as reported by Guenter Roeck.
Note that this could have fired previously if any driver had used
tree-based irqdomain, which always had the RCU requirement.
To solve this, provide a MIPS-specific helper (do_domain_IRQ())
as the pendent of do_IRQ() that will do thing in the right order
(and maybe save some cycles in the process).
Ideally, MIPS would be moved over to using handle_domain_irq(),
but that's much more ambitious.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
[maz: add dependency on CONFIG_IRQ_DOMAIN after report from the kernelci bot]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20210705172352.GA56304@roeck-us.net
Link: https://lore.kernel.org/r/20210706110647.3979002-1-maz@kernel.org
For discrete, users of pin_map() needs to obey the same rules at the TTM
backend, where we map system only objects as WB, and everything else as
WC. The simplest for now is to just force the correct mapping type as
per the new rules for discrete.
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705135310.1502437-1-matthew.auld@intel.com
The list_for_each_entry() iterator, "connector" in this code, can never be
NULL. If we exit the loop without finding the correct connector then
"connector" points invalid memory that is an offset from the list head.
This will eventually lead to memory corruption and presumably a kernel
crash.
Fixes: 9bd81acdb6 ("gma500: Convert Oaktrail to work with new output handling")
Signed-off-by: Harshvardhan Jha <harshvardhan.jha@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210709073959.11443-1-harshvardhan.jha@oracle.com
On XELPD platforms, color management support is not yet enabled.
Fix wrongly reporting the same through platform info, which was
resulting in incorrect initialization and usage.
Cc: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Swati Sharma <swati2.sharma@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707095253.23848-1-uma.shankar@intel.com
Make sure that we disable each of the TX and RX queues in the TDMA and
RDMA control registers. This is a correctness change to be symmetrical
with the code that enables the TX and RX queues.
Tested-by: Maxime Ripard <maxime@cerno.tech>
Fixes: 1c1008c793 ("net: bcmgenet: add main driver file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the nice helpers to initialize and the uid/gid/cred_uid when passed as mount arguments.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch change data type of volatile/persistent id to u64 to make
issue from idr_find and idr_remove(). !HAS_FILE_ID check will protect
integer overflow issue from idr_find and idr_remove().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
[Why]
The original logic is to update eDP's backlight level
on every amdgpu dm atomic commit, which causes excessive
DMUB write. As a result, when playing game or moving window
around, DMUB timeout and system lagging are observed.
[How]
We only need to update eDP's backlight level when current level
doesn't match requested level.
Signed-off-by: Zhan Liu <zhan.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
support umc ras function initialization for aldebaran
v2: squash in compile fix
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
prange is NULL if vm fault retry on invalid address, for this case, can
not use prange to get pdd, use adev to get gpuidx and then get pdd
instead, then increase pdd vm fault counter.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The irq number should be decided by num_crtc, and the num_crtc could change
by parameter.
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since there's nothing special in smu implementation for yellow carp,
it's better to reuse the common smu_v13_0 interfaces and drop the
specific smu_v13_0_1.c|h files.
v2: remove the duplicate register offset and shift mask header files as
well.
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To suppress the annoying warning about version mismatch.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Due to the structure layout change: "uint32_t ThrottlerStatus" -> "
uint8_t ThrottlingPercentage[THROTTLER_COUNT]".
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Due to the structure layout change: "uint32_t ThrottlerStatus" -> "
uint8_t ThrottlingPercentage[THROTTLER_COUNT]".
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If copy_to_user() fails then this should return -EFAULT instead of
-EINVAL.
Fixes: c65b0805e7 ("drm/amdgpu: RAS EEPROM table is now in debugfs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This error path needs to unlock before returning. While we're at it,
the correct error code from copy_to_user() failure is -EFAULT, not
-EINVAL.
Fixes: c65b0805e7 ("drm/amdgpu: RAS EEPROM table is now in debugfs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ivan Mikhaylov says:
====================
net/ncsi: Add NCSI Intel OEM command to keep PHY link up
Add NCSI Intel OEM command to keep PHY link up and prevents any channel
resets during the host load on i210. Also includes dummy response handler for
Intel manufacturer id.
Changes from v1:
1. sparse fixes about casts
2. put it after ncsi_dev_state_probe_cis instead of
ncsi_dev_state_probe_channel because sometimes channel is not ready
after it
3. inl -> intel
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the dummy response handler for Intel boards to prevent incorrect
handling of OEM commands.
Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows to keep PHY link up and prevents any channel resets during
the host load.
It is KEEP_PHY_LINK_UP option(Veto bit) in i210 datasheet which
block PHY reset and power state changes.
Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sparse reports:
net/ncsi/ncsi-rsp.c:406:24: warning: cast to restricted __be32
net/ncsi/ncsi-manage.c:732:33: warning: cast to restricted __be32
net/ncsi/ncsi-manage.c:756:25: warning: cast to restricted __be32
net/ncsi/ncsi-manage.c:779:25: warning: cast to restricted __be32
Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PHY_SPARX5_SERDES depends on OF so SPARX5_SWITCH should also depend
on OF since 'select' does not follow any dependencies.
WARNING: unmet direct dependencies detected for PHY_SPARX5_SERDES
Depends on [n]: (ARCH_SPARX5 || COMPILE_TEST [=n]) && OF [=n] && HAS_IOMEM [=y]
Selected by [y]:
- SPARX5_SWITCH [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_MICROCHIP [=y] && NET_SWITCHDEV [=y] && HAS_IOMEM [=y]
Fixes: 3cfa11bac9 ("net: sparx5: add the basic sparx5 driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Lars Povlsen <lars.povlsen@microchip.com>
Cc: Steen Hegelund <Steen.Hegelund@microchip.com>
Cc: UNGLinuxDriver@microchip.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Creating a vkms_config debugfs file in vkms_drv.c to get/track vkms config
data, for the long-term plan of making vkms configurable and have multiple
different instances.
Reviewed-by: Melissa Wen <melissa.srw@gmail.com>
Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708092002.11847-1-martinsdecarvalhobeatriz@gmail.com
IRQs are requested during driver's ndo_open() and then later
freed up in disable_interrupts() during driver unload.
A race exists where driver can set the CXGB4_FULL_INIT_DONE
flag in ndo_open() after the disable_interrupts() in driver
unload path checks it, and hence misses calling free_irq().
Fix by unregistering netdevice first and sync with driver's
ndo_open(). This ensures disable_interrupts() checks the flag
correctly and frees up the IRQs properly.
Fixes: b37987e8db ("cxgb4: Disable interrupts and napi before unregistering netdev")
Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com>
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When reboot system, no power cycles, firmware is already downloaded,
return -EIO will break driver as error:
mt7921e: probe of 0000:03:00.0 failed with error -5
Skip firmware download and continue to probe.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Fixes: 1c099ab447 ("mt76: mt7921: add MCU support")
Signed-off-by: David S. Miller <davem@davemloft.net>
Since Mikrotik 10/25G NIC MDIO op emulation is not 100% reliable,
on rare occasions it can happen that some physical functions of
the NIC do not get initialized due to timeouted early MDIO op.
This changes the atl1c probe on Mikrotik 10/25G NIC not to
depend on MDIO op emulation.
Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
S390's init_idle_preempt_count(p, cpu) doesn't actually let us initialize the
preempt_count of the requested CPU's idle task: it unconditionally writes
to the current CPU's. This clearly conflicts with idle_threads_init(),
which intends to initialize *all* the idle tasks, including their
preempt_count (or their CPU's, if the arch uses a per-CPU preempt_count).
Unfortunately, it seems the way s390 does things doesn't let us initialize
every possible CPU's preempt_count early on, as the pages where this
resides are only allocated when a CPU is brought up and are freed when it
is brought down.
Let the arch-specific code set a CPU's preempt_count when its lowcore is
allocated, and turn init_idle_preempt_count() into an empty stub.
Fixes: f1a0a376ca ("sched/core: Initialize the idle task with preemption disabled")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210707163338.1623014-1-valentin.schneider@arm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Both clang and gcc (for -march=z13 and later) align functions to 16
bytes at -O2 to benefit branch prediction.
Make asm symbols alignment consistent with that.
This also benefits potential ftrace code patching, which is currently
able to patch 8 aligned bytes at once.
With defconfig this currently increases .text size by 4104 bytes.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Lower case matches the call_on_stack() macro and is easier to read.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Make sure the to be called function takes no arguments (and returns void).
Otherwise usage of CALL_ON_STACK_NORETURN() would generate broken code.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>