Fixes gcc '-Wunused-function' warning:
‘update_dsc_caps’ and ‘apply_dsc_policy_for_stream’ are only used
if 'CONFIG_DRM_AMD_DC_DCN' is defined,
however, it's defined even if 'CONFIG_DRM_AMD_DC_DCN' is not defined.
Thus gcc will report following warning
if 'CONFIG_DRM_AMD_DC_DCN' is not defined:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5572:13: warning:
‘apply_dsc_policy_for_stream’ defined but not used [-Wunused-function]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5556:13: warning:
‘update_dsc_caps’ defined but not used [-Wunused-function]
Thus move the definition of ‘update_dsc_caps’ and
‘apply_dsc_policy_for_stream’ inside define macro to fix it.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Local variable 'i' and 'j' will be initialized in the for loop, so
remove the redundant initialization.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
define a new macro for_each_new_plane_in_state_reverse to replace
for_each_oldnew_plane_in_state_reverse, so that the unused variable
'old_plane_state' can be removed.
Fix gcc warning:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:10066:26: warning:
variable ‘old_plane_state’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of reading the desired 5 bytes of the actual target field,
the code was reading 8. This could result in a corrupted value if the
trailing 3 bytes were non-zero, so instead use an appropriately sized
and zero-initialized bounce buffer, and read only 5 bytes before casting
to u64.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the function amdgpu_uvd_cs_msg(), every branch in the switch
statement will have a return, so the code below the switch statement
will not be executed.
Eliminate the follow smatch warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c:845 amdgpu_uvd_cs_msg() warn:
ignoring unreachable code.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows to tie the log message to a specific DRM device.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
table_freed will be always true when mapping a memory with size
bigger than 2MB. The problem is page table's entries are always
existed, but existing mapping depends on page talbe's bo, so
using a check of page table's bo existed will resolve the issue.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the memset() and snprintf() is not necessary.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-adjust the function return order to avoid empty sdma version in the
sriov environment. (read amdgpu_firmware_info)
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
enable smart shift on dGPU if it is part of HG system and
the platform supports ATCS method to handle power shift.
V2: avoid psc updates in baco enter and exit (Lijo)
fix alignment (Shashank)
V3: rebased on unified ATCS handling. (Alex)
V4: check for return value and warn on failed update (Shashank)
return 0 if device does not support smart shift. (Lizo)
V5: rebased on ATPX/ATCS structures global (Alex)
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Don't flush gart changes after recovering each BO instead
do it after recovering all the BOs. Flishing gart also needed
for amdgpu_ttm_alloc_gart().
v4: use containerof to retrieve adev struct.
v3: rename amdgpu_gart_tlb_flush() -> amdgpu_gart_invalidate_tlb().
v2: abstract out gart tlb flushing logic to amdgpu_gart.c
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allocate PD/PT entries while allocating VM BOs and use that
instead of allocating those entries separately.
v2: create a new var for num entries.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove unused code related to shadow BO.
v2: removing shadow bo ptr from base class.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The subclass, amdgpu_bo_vm is intended for PT/PD BOs which are also
shadowed, so switch to amdgpu_bo_vm BO for PT/PD BOs.
v4: update amdgpu_vm_update_funcs to accept amdgpu_bo_vm.
v3: simplify code.
check also if shadow bo exist instead of checking bo only type.
v2: squash three related patches.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add amdgpu_bo_add_to_shadow_list() to handle shadow list
additions and amdgpu_bo_shadowed() to check if a BO is shadowed.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do the shadow bo validation in the VM code as
VM code knows/owns shadow BOs.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new BO subclass that will be used by amdgpu vm code.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Releasing pinned BOs is illegal now. UVD 6 was missing from:
commit 2f40801dc5 ("drm/amdgpu: make sure we unpin the UVD BO")
Fixes: 2f40801dc5 ("drm/amdgpu: make sure we unpin the UVD BO")
Cc: stable@vger.kernel.org
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch is to retain the fine grain tuning parameters after resume for
legacy APU, it will cover Raven/Raven2/Picasso.
Signed-off-by: Xiaojian Du <Xiaojian.Du@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use WARN_ON() inside if-condition when possible.
v2: Squash in coding style fix (Alex)
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
WARN_ON() will not kill the process so the second WARN_ON()
will try to dereference NULL pointer.
Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add support to handle ATCS method for power shift control.
used to communicate dGPU device state to SBIOS.
V2: use defined acpi func for checking psc support (Lijo)
fix alignment (Shashank)
V3: rebased on unified ATCS handling (Alex)
V4: rebased on ATPX/ATCS structures global (Alex)
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
use attr_update if its available as part of the attribute.
default_attr_update was used even if attr->attr_update is true.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Shashank Sharma <Shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since both sg and device type BOs have metadata buffer, free
the buffer in both cases when to destroy BOs
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Acked-by: Nirmoy Das <Nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Although the kfd_ioctl_get_dmabuf_info() still fail it will indicate
the caller right metadat_size useful for the same kfd ioctl next time.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Flow table that contains flow pointing to multiple flow tables or multiple
TIRs must have a level lower than 64. In our case it applies to muli-
destination flow table.
Fix the level of the created table to comply with HW Spec definitions, and
still make sure that its level lower than SW-owned tables, so that it
would be possible to point from the multi-destination FW table to SW
tables.
Fixes: 34583beea4 ("net/mlx5: DR, Create multi-destination table for SW-steering use")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When a driver's profile doesn't support a dedicated PTP-RQ,
configuration of CQE compression while HW TS is configured should fail.
Fixes: 885b8cfb16 ("net/mlx5e: Update ethtool setting of CQE compression")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
On some devices the ignore flow level cap is not supported and we
shouldn't use it. Setting the dest ft with mlx5_chains_get_tc_end_ft()
already gives the correct end ft if ignore flow level cap is supported
or not.
Fixes: 39ac237ce0 ("net/mlx5: E-Switch, Refactor chains and priorities")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
If not supported show an error and return instead of trying to offload
to the hardware and fail.
Fixes: 699e96ddf4 ("net/mlx5e: Support offloading tc double vlan headers match")
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In case driver sent NACK to firmware on sync reset request, it will get
sync reset abort event while it didn't set sync reset requested mode.
Thus, on abort sync reset event handler, driver should check reset
requested is set before trying to stop sync reset poll.
Fixes: 7dd6df329d ("net/mlx5: Handle sync reset abort event")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
TLS offload is not supported in switchdev mode.
Fixes: 7a9fb35e8c ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Device supports setting of a single fec mode at a time, enforce this
by bitmap_weight == 1. Input from fec command is in u32, avoid cast to
unsigned long and use bitmap_from_arr32 to populate bitmap safely.
Fixes: 4bd9d5070b ("net/mlx5e: Enforce setting of a single FEC mode")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
It is now possible to build a modular kernel for vexpress by
not setting CONFIG_ARCH_VEXPRESS=y and instead setting =m on the
drivers that it normally implies. This is with the exception of
CLK_VEXPRESS_OSC which is currently hidden behind a dependency on
one of several ARCH_* variables. Remove that dependency so that
CLK_VEXPRESS_OSC may be enabled without it.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/I435a21e2e5f6187db54f4ef2079b60028ab2ea69
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210520161702.3746174-1-lee.jones@linaro.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Almost unused, gets rid of another typedef.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Unlinked lists are held in the perag, and freeing of inodes needs to
be passed a perag, too, so look up the perag early in the unlink
processing and use it throughout.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Because it's a mess.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Now that we've internalised the two-phase inode allocation, we can
now easily make the AG selection and allocation atomic from the
perspective of a single perag context. This will ensure AGs going
offline/away cannot occur between the selection and allocation
steps.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
This is just a simple wrapper around the per-ag inode allocation
that doesn't need to exist. The internal mechanism to select and
allocate within an AG does not need to be exposed outside
xfs_ialloc.c, and it being exposed simply makes it harder to follow
the code and simplify it.
This is simplified by internalising xf_dialloc_select_ag() and
xfs_dialloc_ag() into a single xfs_dialloc() function and then
xfs_dir_ialloc() can go away.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
xfs_dialloc_select_ag() does a lot of repetitive work. It first
calls xfs_ialloc_ag_select() to select the AG to start allocation
attempts in, which can do up to two entire loops across the perags
that inodes can be allocated in. This is simply checking if there is
spce available to allocate inodes in an AG, and it returns when it
finds the first candidate AG.
xfs_dialloc_select_ag() then does it's own iterative walk across
all the perags locking the AGIs and trying to allocate inodes from
the locked AG. It also doesn't limit the search to mp->m_maxagi,
so it will walk all AGs whether they can allocate inodes or not.
Hence if we are really low on inodes, we could do almost 3 entire
walks across the whole perag range before we find an allocation
group we can allocate inodes in or report ENOSPC.
Because xfs_ialloc_ag_select() returns on the first candidate AG it
finds, we can simply do these checks directly in
xfs_dialloc_select_ag() before we lock and try to allocate inodes.
This reduces the inode allocation pass down to 2 perag sweeps at
most - one for aligned inode cluster allocation and if we can't
allocate full, aligned inode clusters anywhere we'll do another pass
trying to do sparse inode cluster allocation.
This also removes a big chunk of duplicate code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
The only caller of xfs_dialloc_select_ag() will always return
-ENOSPC to it's caller if the agbp returned from
xfs_dialloc_select_ag() is NULL. IOWs, failure to find a candidate
AGI we can allocate inodes from is always an ENOSPC condition, so
move this logic up into xfs_dialloc_select_ag() so we can simplify
the return logic in this function.
xfs_dialloc_select_ag() now only ever returns 0 with a locked
agbp, or an error with no agbp.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Now that everything passes a perag, the agno is not needed anymore.
Convert all the users to use pag->pag_agno instead and remove the
agno from the cursor. This was largely done as an automated search
and replace.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Which will eventually completely replace the agno in it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>