Commit graph

1,169,205 commits

Author SHA1 Message Date
Christina Jacob
cff713ce6c octeontx2-pf: ethtool physical link configuration
Register set_link_ksetting callback with driver such that
link configurations parameters like advertised mode,speed, duplex
and autoneg can be configured.

below command
ethtool -s eth0 advertise 0x1 speed 10 duplex full autoneg on

Signed-off-by: Christina Jacob <cjacob@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10 15:19:53 -08:00
Christina Jacob
1a50280c25 octeontx2-pf: ethtool physical link status
Register get_link_ksettings callback to get link status information
from the driver. As virtual function (vf) shares same physical link
same API is used for both the drivers and for loop back drivers
simply returns the fixed values as its does not have physical link.

ethtool eth3
Settings for eth3:
        Supported ports: [ ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Half 1000baseT/Full
                                10000baseKR/Full
                                1000baseX/Full
        Supports auto-negotiation: No
        Supported FEC modes: BaseR RS
        Advertised link modes:  Not reported
        Advertised pause frame use: No
        Advertised auto-negotiation: No
        Advertised FEC modes: None

ethtool lbk0
Settings for lbk0:
	Speed: 100000Mb/s
        Duplex: Full

Signed-off-by: Christina Jacob <cjacob@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10 15:19:53 -08:00
Christina Jacob
9d8711b255 octeontx2-af: advertised link modes support on cgx
CGX supports setting advertised link modes on physical link.
This patch adds support to derive cgx mode from ethtool
link mode and pass it to firmware to configure the same.

Signed-off-by: Christina Jacob <cjacob@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10 15:19:53 -08:00
Christina Jacob
56b6d53986 octeontx2-af: Physical link configuration support
CGX LMAC, the physical interface support link configuration parameters
like speed, auto negotiation, duplex  etc. Firmware saves these into
memory region shared between firmware and this driver.

This patch adds mailbox handler set_link_mode, fw_data_get to
configure and read these parameters.

Signed-off-by: Christina Jacob <cjacob@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10 15:19:53 -08:00
Christina Jacob
d0cf9503e9 octeontx2-pf: ethtool fec mode support
Add ethtool support to configure fec modes baser/rs and
support to fecth FEC stats from CGX as well PHY.

Configure fec mode
	- ethtool --set-fec eth0 encoding rs/baser/off/auto
Query fec mode
	- ethtool --show-fec eth0

Signed-off-by: Christina Jacob <cjacob@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10 15:19:53 -08:00
Felix Manlunas
bd74d4ea29 octeontx2-af: Add new CGX_CMD to get PHY FEC statistics
This patch adds support to fetch fec stats from PHY. The stats are
put in the shared data struct fwdata.  A PHY driver indicates
that it has FEC stats by setting the flag fwdata.phy.misc.has_fec_stats

Besides CGX_CMD_GET_PHY_FEC_STATS, also add CGX_CMD_PRBS and
CGX_CMD_DISPLAY_EYE to enum cgx_cmd_id so that Linux's enum list is in sync
with firmware's enum list.

Signed-off-by: Felix Manlunas <fmanlunas@marvell.com>
Signed-off-by: Christina Jacob <cjacob@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10 15:19:53 -08:00
Christina Jacob
84c4f9cab4 octeontx2-af: forward error correction configuration
CGX block supports forward error correction modes baseR
and RS. This patch adds support to set encoding mode
and to read corrected/uncorrected block counters

Adds new mailbox handlers set_fec to configure encoding modes
and fec_stats to read counters and also increase mbox timeout
to accomdate firmware command response timeout.

Along with new CGX_CMD_SET_FEC command add other commands to
sync with kernel enum list with firmware.

Signed-off-by: Christina Jacob <cjacob@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10 15:19:53 -08:00
Kevin Hao
1fb3ca7675 net: octeontx2: Fix the confusion in buffer alloc failure path
Pavel pointed that the return of dma_addr_t in
otx2_alloc_rbuf/__otx2_alloc_rbuf() seem suspicious because a negative
error code may be returned in some cases. For a dma_addr_t, the error
code such as -ENOMEM does seem a valid value, so we can't judge if the
buffer allocation fail or not based on that value. Add a parameter for
otx2_alloc_rbuf/__otx2_alloc_rbuf() to store the dma address and make
the return value to indicate if the buffer allocation really fail or
not.

Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Tested-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10 15:16:35 -08:00
David S. Miller
d816f2a9cb Merge branch 'Add-MBIM-over-MHI-support'
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10 15:11:51 -08:00
Loic Poulain
163c5e6262 net: mhi: Add mbim proto
MBIM has initially been specified by USB-IF for transporting data (IP)
between a modem and a host over USB. However some modern modems also
support MBIM over PCIe (via MHI). In the same way as QMAP(rmnet), it
allows to aggregate IP packets and to perform context multiplexing.

This change adds minimal MBIM data transport support to MHI, allowing
to support MBIM only modems. MBIM being based on USB NCM, it reuses
and copy some helpers/functions from the USB stack (cdc-ncm, cdc-mbim).

Note that is a subset of the CDC-MBIM specification, supporting only
transport of network data (IP), there is no support for DSS. Moreover
the multi-session (for multi-pdn) is not supported in this initial
version, but will be added latter, and aligned with the cdc-mbim
solution (VLAN tags).

This code has been inspired from the mhi_mbim downstream implementation
(Carl Yin <carl.yin@quectel.com>).

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10 15:11:51 -08:00
Loic Poulain
84c55f16dc net: mhi: Add rx_length_errors stat
This can be used by proto when packet len is incorrect.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10 15:11:51 -08:00
Loic Poulain
77e8080e12 net: mhi: Create mhi.h
Move mhi-net shared structures to mhi header, that will be used by
upcoming proto(s).

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10 15:11:51 -08:00
Loic Poulain
b6ec6b8942 net: mhi: Add dedicated folder
Create a dedicated mhi directory for mhi-net, mhi-net is going to
be split into differente files (for additional protocol support).

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10 15:11:51 -08:00
Loic Poulain
ddeb9bfa59 net: mhi: Add protocol support
MHI can transport different protocols, some are handled at upper level,
like IP and QMAP(rmnet/netlink), but others will need to be inside MHI
net driver, like mbim. This change adds support for protocol rx and
tx_fixup callbacks registration, that can be used to encode/decode the
targeted protocol.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10 15:11:50 -08:00
wenxu
1bcc51ac07 net/sched: cls_flower: Reject invalid ct_state flags rules
Reject the unsupported and invalid ct_state flags of cls flower rules.

Fixes: e0ace68af2 ("net/sched: cls_flower: Add matching on conntrack info")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10 15:07:45 -08:00
Rahul Lakkireddy
24a1720a08 cxgb4: collect serial config version from register
Collect serial config version information directly from an internal
register, instead of explicitly resizing VPD.

v2:
- Add comments on info stored in PCIE_STATIC_SPARE2 register.

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10 15:05:40 -08:00
Bhaskar Chowdhury
7cbe89398a dt-bindings: usb: Change descibe to describe in usbmisc-imx.txt
s/descibe/describe/

Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210203153315.15170-1-unixbhaskar@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
2021-02-10 16:55:46 -06:00
Sebastian Andrzej Siewior
9a14712221 PCI: Remove WARN_ON(in_interrupt())
WARN_ON(in_interrupt()) is used for historic reasons to ensure proper usage
of down_read() and predates might_sleep() and lockdep.

down_read() has might_sleep() which also catches users from preemption
disabled regions while in_interrupt() does not.

Remove WARN_ON(in_interrupt()) because there are now better debugging
facilities.

Link: https://lore.kernel.org/r/20210208194400.384003-1-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-02-10 16:46:29 -06:00
Thomas Gleixner
72f40a2823 x86/softirq/64: Inline do_softirq_own_stack()
There is no reason to have this as a seperate function for a single caller.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210210002513.382806685@linutronix.de
2021-02-10 23:34:17 +01:00
Thomas Gleixner
db1cc7aede softirq: Move do_softirq_own_stack() to generic asm header
To avoid include recursion hell move the do_softirq_own_stack() related
content into a generic asm header and include it from all places in arch/
which need the prototype.

This allows architectures to provide an inline implementation of
do_softirq_own_stack() without introducing a lot of #ifdeffery all over the
place.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210210002513.289960691@linutronix.de
2021-02-10 23:34:16 +01:00
Thomas Gleixner
cd1a41ceba softirq: Move __ARCH_HAS_DO_SOFTIRQ to Kconfig
To prepare for inlining do_softirq_own_stack() replace
__ARCH_HAS_DO_SOFTIRQ with a Kconfig switch and select it in the affected
architectures.

This allows in the next step to move the function prototype and the inline
stub into a seperate asm-generic header file which is required to avoid
include recursion.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210210002513.181713427@linutronix.de
2021-02-10 23:34:16 +01:00
Thomas Gleixner
624db9eabc x86: Select CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK
Now that all invocations of irq_exit_rcu() happen on the irq stack, turn on
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK which causes the core code to invoke
__do_softirq() directly without going through do_softirq_own_stack().

That means do_softirq_own_stack() is only invoked from task context which
means it can't be on the irq stack. Remove the conditional from
run_softirq_on_irqstack_cond() and rename the function accordingly.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210210002513.068033456@linutronix.de
2021-02-10 23:34:16 +01:00
Thomas Gleixner
52d743f3b7 x86/softirq: Remove indirection in do_softirq_own_stack()
Use the new inline stack switching and remove the old ASM indirect call
implementation.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210210002512.972714001@linutronix.de
2021-02-10 23:34:15 +01:00
Thomas Gleixner
359f01d181 x86/entry: Use run_sysvec_on_irqstack_cond() for XEN upcall
To avoid yet another macro implementation reuse the existing
run_sysvec_on_irqstack_cond() and move the set_irq_regs() handling into the
called function. Makes the code even simpler.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210210002512.869753106@linutronix.de
2021-02-10 23:34:15 +01:00
Thomas Gleixner
5b51e1db9b x86/entry: Convert device interrupts to inline stack switching
Convert device interrupts to inline stack switching by replacing the
existing macro implementation with the new inline version. Tweak the
function signature of the actual handler function to have the vector
argument as u32. That allows the inline macro to avoid extra intermediates
and lets the compiler be smarter about the whole thing.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210210002512.769728139@linutronix.de
2021-02-10 23:34:15 +01:00
Thomas Gleixner
569dd8b4eb x86/entry: Convert system vectors to irq stack macro
To inline the stack switching and to prepare for enabling
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK provide a macro template for system
vectors and device interrupts and convert the system vectors over to it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210210002512.676197354@linutronix.de
2021-02-10 23:34:15 +01:00
Thomas Gleixner
a0cfc74d0b x86/irq: Provide macro for inlining irq stack switching
The effort to make the ASM entry code slim and unified moved the irq stack
switching out of the low level ASM code so that the whole return from
interrupt work and state handling can be done in C and the ASM code just
handles the low level details of entry and exit.

This ended up being a suboptimal implementation for various reasons
(including tooling). The main pain points are:

 - The indirect call which is expensive thanks to retpoline

 - The inability to stay on the irq stack for softirq processing on return
   from interrupt

 - The fact that the stack switching code ends up being an easy to target
   exploit gadget.

Prepare for inlining the stack switching logic into the C entry points by
providing a ASM macro which contains the guts of the switching mechanism:

  1) Store RSP at the top of the irq stack
  2) Switch RSP to the irq stack
  3) Invoke code
  4) Pop the original RSP back

Document the unholy asm() logic while at it to reduce the amount of head
scratching required a half year from now.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210210002512.578371068@linutronix.de
2021-02-10 23:34:14 +01:00
Thomas Gleixner
3c5e0267ec x86/apic: Split out spurious handling code
sysvec_spurious_apic_interrupt() calls into the handling body of
__spurious_interrupt() which is not obvious as that function is declared
inside the DEFINE_IDTENTRY_IRQ(spurious_interrupt) macro.

As __spurious_interrupt() is currently always inlined this ends up with two
copies of the same code for no reason.

Split the handling function out and invoke it from both entry points.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210210002512.469379641@linutronix.de
2021-02-10 23:34:14 +01:00
Thomas Gleixner
951c2a51ae x86/irq/64: Adjust the per CPU irq stack pointer by 8
The per CPU hardirq_stack_ptr contains the pointer to the irq stack in the
form that it is ready to be assigned to [ER]SP so that the first push ends
up on the top entry of the stack.

But the stack switching on 64 bit has the following rules:

    1) Store the current stack pointer (RSP) in the top most stack entry
       to allow the unwinder to link back to the previous stack

    2) Set RSP to the top most stack entry

    3) Invoke functions on the irq stack

    4) Pop RSP from the top most stack entry (stored in #1) so it's back
       to the original stack.

That requires all stack switching code to decrement the stored pointer by 8
in order to be able to store the current RSP and then set RSP to that
location. That's a pointless exercise.

Do the -8 adjustment right when storing the pointer and make the data type
a void pointer to avoid confusion vs. the struct irq_stack data type which
is on 64bit only used to declare the backing store. Move the definition
next to the inuse flag so they likely end up in the same cache
line. Sticking them into a struct to enforce it is a seperate change.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210210002512.354260928@linutronix.de
2021-02-10 23:34:14 +01:00
Thomas Gleixner
e7f8900179 x86/irq: Sanitize irq stack tracking
The recursion protection for hard interrupt stacks is an unsigned int per
CPU variable initialized to -1 named __irq_count. 

The irq stack switching is only done when the variable is -1, which creates
worse code than just checking for 0. When the stack switching happens it
uses this_cpu_add/sub(1), but there is no reason to do so. It simply can
use straight writes. This is a historical leftover from the low level ASM
code which used inc and jz to make a decision.

Rename it to hardirq_stack_inuse, make it a bool and use plain stores.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210210002512.228830141@linutronix.de
2021-02-10 23:34:13 +01:00
Thomas Gleixner
15f720aabe x86/entry: Fix instrumentation annotation
Embracing a callout into instrumentation_begin() / instrumentation_begin()
does not really make sense. Make the latter instrumentation_end().

Fixes: 2f6474e463 ("x86/entry: Switch XEN/PV hypercall entry to IDTENTRY")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210210002512.106502464@linutronix.de
2021-02-10 23:34:13 +01:00
Kaixu Xia
bfe2e5c44d i40e: remove the useless value assignment in i40e_clean_adminq_subtask
The variable ret is overwritten by the following call
i40e_clean_arq_element() and the assignment is useless, so remove it.

Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10 14:28:40 -08:00
Przemyslaw Patynowski
a9219b332f i40e: VLAN field for flow director
Allow user to specify VLAN field and add it to flow director. Show VLAN
field in "ethtool -n ethx" command.
Handle VLAN type and tag field provided by ethtool command. Refactored
filter addition, by replacing static arrays with runtime dummy packet
creation, which allows specifying VLAN field.
Previously, VLAN field was omitted.

Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10 14:28:40 -08:00
Przemyslaw Patynowski
efca91e89b i40e: Add flow director support for IPv6
Flow director for IPv6 is not supported.
1) Implementation of support for IPv6 flow director.
2) Added handlers for addition of TCP6, UDP6, SCTP6, IPv6.
3) Refactored legacy code to make it more generic.
4) Added packet templates for TCP6, UDP6, SCTP6, IPv6.
5) Added handling of IPv6 source and destination address for flow director.
6) Improved argument passing for source and destination portin TCP6, UDP6
   and SCTP6.
7) Added handling of ethtool -n for IPv6, TCP6,UDP6, SCTP6.
8) Used correct bit flag regarding FLEXOFF field of flow director data
   descriptor.

Without this patch, there would be no support for flow director on IPv6,
TCP6, UDP6, SCTP6.
Tested based on x710 datasheet by using:
ethtool -N enp133s0f0 flow-type tcp4 src-port 13 dst-port 37 user-def 0x44142 action 1
ethtool -N enp133s0f0 flow-type tcp6 src-port 13 dst-port 40 user-def 0x44142 action 2
ethtool -N enp133s0f0 flow-type udp4 src-port 20 dst-port 40 user-def 0x44142 action 3
ethtool -N enp133s0f0 flow-type udp6 src-port 25 dst-port 40 user-def 0x44142 action 4
ethtool -N enp133s0f0 flow-type sctp4 src-port 55 dst-port 65 user-def 0x44142 action 5
ethtool -N enp133s0f0 flow-type sctp6 src-port 60 dst-port 40 user-def 0x44142 action 6
ethtool -N enp133s0f0 flow-type ip4 src-ip 1.1.1.1 dst-ip 1.1.1.4 user-def 0x44142 action 7
ethtool -N enp133s0f0 flow-type ip6 src-ip fe80::3efd:feff:fe6f:bbbb dst-ip fe80::3efd:feff:fe6f:aaaa user-def 0x44142 action 8
Then send traffic from client which matches the criteria provided to ethtool.
Observe that packets are redirected to user set queues with ethtool -S <interface>

Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10 14:28:40 -08:00
Aleksandr Loktionov
95f352dca1 i40e: Add EEE status getting & setting implementation
Implement Energy Efficient Ethernet (EEE) status getting & setting.
The i40e_get_eee() requesting PHY EEE capabilities from firmware.
The i40e_set_eee() function requests PHY EEE capabilities
from firmware and sets PHY EEE advertising to full abilities or 0
depending whether EEE is to be enabled or disabled.

Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10 14:28:40 -08:00
Arkadiusz Kubalewski
5effa78e7c i40e: Add netlink callbacks support for software based DCB
Add callbacks used by software based LLDP agent, which allows to
configure DCB feature from userspace.

Update copyright dates as appropriate.

If LLDP agent is turned off in BIOS, or after setting private flag
("disable-fw-lldp on"). The driver initialized DCB functionality with
default values, one traffic class with 100% bandwidth allocated.

The new netlink callbacks are required for software LLDP agent, it
must be able to acquire current DCB configuration of a network port
and apply DCB configuration changes, if required.

Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10 14:28:40 -08:00
Arkadiusz Kubalewski
4b208eaa80 i40e: Add init and default config of software based DCB
Add extra handling on changing the "disable-fw-lldp" private
flag to properly initialize software based DCB feature.

Add default configuration of DCB functionality when Firmware
LLDP agent is turned off, in case of driver probe and device
reset on reconfiguration.

Update copyright dates as appropriate.

Software based DCB is a brand-new feature in i40e driver.
Before, DCB was implemented by Firmware LLDP agent only. The agent was
responsible for handling incoming DCB-related LLDP frames and
applying received DCB configuration to hardware.

Default configuration and new initialization flow for software based
DCB is required. If LLDP agent is turned off in BIOS, or after
setting private flag ("disable-fw-lldp on"). The driver initializes
DCB functionality with default values, one traffic class with 100%
bandwidth allocated.

Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10 14:28:40 -08:00
Arkadiusz Kubalewski
90bc8e003b i40e: Add hardware configuration for software based DCB
Add registers and definitions required for applying
DCB related hardware configuration.

Add functions responsible for calculating and setting proper
hardware configuration values for software based DCB functionality.

Add function responsible for invoking Admin Queue command, which
results in applying new DCB configuration to the hardware.

Update copyright dates as appropriate.

Software based DCB is a brand-new feature in i40e driver.
Before, DCB was implemented by Firmware LLDP agent only. The agent was
responsible for handling incoming DCB-related LLDP frames and
applying received DCB configuration to hardware.

New communication channel between software and hardware is required
for software driver. It must be able to calculate and configure all
the registers related for DCB feature.

Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-10 14:28:39 -08:00
Mimi Zohar
cccb0efdef Merge branch 'ima-kexec-fixes' into next-integrity 2021-02-10 16:34:06 -05:00
David S. Miller
dc9d87581d Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2021-02-10 13:30:12 -08:00
Jacopo Mondi
ce79aecf60 media: i2c: max9271: Add MODULE_* macros
Since commit 7f03d9fefc ("media: i2c: Kconfig: Make MAX9271
a module") the max9271 library is built as a module but no
MODULE_*() attributes were specified, causing a build error
due to missing license information.

ERROR: modpost: missing MODULE_LICENSE() in drivers/media/i2c/max9271.o

Fix this by adding MODULE attributes to the driver.

Fixes: 7f03d9fefc ("media: i2c: Kconfig: Make MAX9271 a module")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-10 22:26:04 +01:00
Thomas Gleixner
70245f86c1 x86/pci: Create PCI/MSI irqdomain after x86_init.pci.arch_init()
Invoking x86_init.irqs.create_pci_msi_domain() before
x86_init.pci.arch_init() breaks XEN PV.

The XEN_PV specific pci.arch_init() function overrides the default
create_pci_msi_domain() which is obviously too late.

As a consequence the XEN PV PCI/MSI allocation goes through the native
path which runs out of vectors and causes malfunction.

Invoke it after x86_init.pci.arch_init().

Fixes: 6b15ffa07d ("x86/irq: Initialize PCI/MSI domain at PCI init time")
Reported-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87pn18djte.fsf@nanos.tec.linutronix.de
2021-02-10 22:06:47 +01:00
Lakshmi Ramasubramanian
f31e3386a4 ima: Free IMA measurement buffer after kexec syscall
IMA allocates kernel virtual memory to carry forward the measurement
list, from the current kernel to the next kernel on kexec system call,
in ima_add_kexec_buffer() function.  This buffer is not freed before
completing the kexec system call resulting in memory leak.

Add ima_buffer field in "struct kimage" to store the virtual address
of the buffer allocated for the IMA measurement list.
Free the memory allocated for the IMA measurement list in
kimage_file_post_load_cleanup() function.

Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Fixes: 7b8589cc29 ("ima: on soft reboot, save the measurement list")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-02-10 15:49:38 -05:00
Lakshmi Ramasubramanian
6d14c65178 ima: Free IMA measurement buffer on error
IMA allocates kernel virtual memory to carry forward the measurement
list, from the current kernel to the next kernel on kexec system call,
in ima_add_kexec_buffer() function.  In error code paths this memory
is not freed resulting in memory leak.

Free the memory allocated for the IMA measurement list in
the error code paths in ima_add_kexec_buffer() function.

Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Fixes: 7b8589cc29 ("ima: on soft reboot, save the measurement list")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-02-10 15:49:35 -05:00
wanghongzhe
a381b70a1c seccomp: Improve performace by optimizing rmb()
According to Kees's suggest, we started with the patch that just replaces
rmb() with smp_rmb() and did a performance test with UnixBench. The
results showed the overhead about 2.53% in rmb() test compared to the
smp_rmb() one, in a x86-64 kernel with CONFIG_SMP enabled running inside a
qemu-kvm vm. The test is a "syscall" testcase in UnixBench, which executes
5 syscalls in a loop during a certain timeout (100 second in our test) and
counts the total number of executions of this 5-syscall sequence. We set
a seccomp filter with all allow rule for all used syscalls in this test
(which will go bitmap path) to make sure the rmb() will be executed. The
details for the test:

with rmb():
/txm # ./syscall_allow_min 100
COUNT|35861159|1|lps
/txm # ./syscall_allow_min 100
COUNT|35545501|1|lps
/txm # ./syscall_allow_min 100
COUNT|35664495|1|lps

with smp_rmb():
/txm # ./syscall_allow_min 100
COUNT|36552771|1|lps
/txm # ./syscall_allow_min 100
COUNT|36491247|1|lps
/txm # ./syscall_allow_min 100
COUNT|36504746|1|lps

For a x86-64 kernel with CONFIG_SMP enabled, the smp_rmb() is just a
compiler barrier() which have no impact in runtime, while rmb() is a
lfence which will prevent all memory access operations (not just load
according the recently claim by Intel) behind itself. We can also figure
it out in disassembly:

with rmb():
0000000000001430 <__seccomp_filter>:
    1430:   41 57                   push   %r15
    1432:   41 56                   push   %r14
    1434:   41 55                   push   %r13
    1436:   41 54                   push   %r12
    1438:   55                      push   %rbp
    1439:   53                      push   %rbx
    143a:   48 81 ec 90 00 00 00    sub    $0x90,%rsp
    1441:   89 7c 24 10             mov    %edi,0x10(%rsp)
    1445:   89 54 24 14             mov    %edx,0x14(%rsp)
    1449:   65 48 8b 04 25 28 00    mov    %gs:0x28,%rax
    1450:   00 00
    1452:   48 89 84 24 88 00 00    mov    %rax,0x88(%rsp)
    1459:   00
    145a:   31 c0                   xor    %eax,%eax
*   145c:   0f ae e8                lfence
    145f:   48 85 f6                test   %rsi,%rsi
    1462:   49 89 f4                mov    %rsi,%r12
    1465:   0f 84 42 03 00 00       je     17ad <__seccomp_filter+0x37d>
    146b:   65 48 8b 04 25 00 00    mov    %gs:0x0,%rax
    1472:   00 00
    1474:   48 8b 98 80 07 00 00    mov    0x780(%rax),%rbx
    147b:   48 85 db                test   %rbx,%rbx

with smp_rmb();
0000000000001430 <__seccomp_filter>:
    1430:   41 57                   push   %r15
    1432:   41 56                   push   %r14
    1434:   41 55                   push   %r13
    1436:   41 54                   push   %r12
    1438:   55                      push   %rbp
    1439:   53                      push   %rbx
    143a:   48 81 ec 90 00 00 00    sub    $0x90,%rsp
    1441:   89 7c 24 10             mov    %edi,0x10(%rsp)
    1445:   89 54 24 14             mov    %edx,0x14(%rsp)
    1449:   65 48 8b 04 25 28 00    mov    %gs:0x28,%rax
    1450:   00 00
    1452:   48 89 84 24 88 00 00    mov    %rax,0x88(%rsp)
    1459:   00
    145a:   31 c0                   xor    %eax,%eax
    145c:   48 85 f6                test   %rsi,%rsi
    145f:   49 89 f4                mov    %rsi,%r12
    1462:   0f 84 42 03 00 00       je     17aa <__seccomp_filter+0x37a>
    1468:   65 48 8b 04 25 00 00    mov    %gs:0x0,%rax
    146f:   00 00
    1471:   48 8b 98 80 07 00 00    mov    0x780(%rax),%rbx
    1478:   48 85 db                test   %rbx,%rbx

Signed-off-by: wanghongzhe <wanghongzhe@huawei.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/1612496049-32507-1-git-send-email-wanghongzhe@huawei.com
2021-02-10 12:40:11 -08:00
Colin Ian King
4a245479c2 io_uring: remove redundant initialization of variable ret
The variable ret is being initialized with a value that is never read
and it is being updated later with a new value.  The initialization is
redundant and can be removed.

Addresses-Coverity: ("Unused value")
Fixes: b63534c41e ("io_uring: re-issue block requests that failed because of resources")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-10 13:28:41 -07:00
Pavel Begunkov
34343786ec io_uring: unpark SQPOLL thread for cancelation
We park SQPOLL task before going into io_uring_cancel_files(), so the
task won't run task_works including those that might be important for
the cancellation passes. In this case it's io_poll_remove_one(), which
frees requests via io_put_req_deferred().

Unpark it for while waiting, it's ok as we disable submissions
beforehand, so no new requests will be generated.

INFO: task syz-executor893:8493 blocked for more than 143 seconds.
Call Trace:
 context_switch kernel/sched/core.c:4327 [inline]
 __schedule+0x90c/0x21a0 kernel/sched/core.c:5078
 schedule+0xcf/0x270 kernel/sched/core.c:5157
 io_uring_cancel_files fs/io_uring.c:8912 [inline]
 io_uring_cancel_task_requests+0xe70/0x11a0 fs/io_uring.c:8979
 __io_uring_files_cancel+0x110/0x1b0 fs/io_uring.c:9067
 io_uring_files_cancel include/linux/io_uring.h:51 [inline]
 do_exit+0x2fe/0x2ae0 kernel/exit.c:780
 do_group_exit+0x125/0x310 kernel/exit.c:922
 __do_sys_exit_group kernel/exit.c:933 [inline]
 __se_sys_exit_group kernel/exit.c:931 [inline]
 __x64_sys_exit_group+0x3a/0x50 kernel/exit.c:931
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Cc: stable@vger.kernel.org # 5.5+
Reported-by: syzbot+695b03d82fa8e4901b06@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-02-10 13:28:41 -07:00
Thomas Gleixner
4dc1d28ce2 Merge branch 'objtool/core' into x86/entry
to base the irq stack modifications on.
2021-02-10 21:16:44 +01:00
Jiapeng Chong
bd2d4e6c6e selftests/bpf: Simplify the calculation of variables
Fix the following coccicheck warnings:

./tools/testing/selftests/bpf/xdpxceiver.c:954:28-30: WARNING !A || A &&
B is equivalent to !A || B.

./tools/testing/selftests/bpf/xdpxceiver.c:932:28-30: WARNING !A || A &&
B is equivalent to !A || B.

./tools/testing/selftests/bpf/xdpxceiver.c:909:28-30: WARNING !A || A &&
B is equivalent to !A || B.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1612860398-102839-1-git-send-email-jiapeng.chong@linux.alibaba.com
2021-02-10 12:14:27 -08:00
Mark Brown
b165457c50
Merge series "ASoC: dapm/pins: handle component prefix" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
SoundWire machine drivers make a heavy use of component prefixes to
uniquify control names. This however results in errors when looking
for widgets or pins. This patchset suggests two solutions but feedback
or suggestions on how to take the prefix into account would be
welcome.

Bard Liao (1):
  ASoC: Intel: boards: max98373: get dapm from cpu_dai

Shuming Fan (1):
  ASoC: dapm: use component prefix when checking widget names

 sound/soc/intel/boards/sof_maxim_common.c |  5 +++--
 sound/soc/soc-dapm.c                      | 13 ++++++++++++-
 2 files changed, 15 insertions(+), 3 deletions(-)

--
2.25.1
2021-02-10 20:10:03 +00:00