Commit graph

1,169,205 commits

Author SHA1 Message Date
Takeshi Saito
d7aefb2887 mmc: renesas_sdhi_internal_dmac: Fix DMA buffer alignment from 8 to 128-bytes
According to the latest datasheet, the internal DMAC buffer alignment
R-Car Gen3 SDHI HW should be 128-bytes. So, fix it.

Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
[shimoda: revise commit description, rebase]
Fixes: 2a68ea7896 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/1608114572-1892-2-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-01 11:54:43 +01:00
Douglas Anderson
f16c8fd444 mmc: sdhci-msm: Actually set the actual clock
The MSM SDHCI driver always set the "actual_clock" field to 0.  It had
a comment about it not being needed because we weren't using the
standard SDHCI divider mechanism and we'd just fallback to
"host->clock".  However, it's still better to provide the actual
clock.  Why?

1. It will make timeout calculations slightly better.  On one system I
   have, the eMMC requets 200 MHz (for HS400-ES) but actually gets 192
   MHz.  These are close, but why not get the more accurate one.

2. If things are seriously off in the clock driver and it's missing
   rates or picking the wrong rate (maybe it's rounding up instead of
   down), this will make it much more obvious what's going on.

NOTE: we have to be a little careful here because the "actual_clock"
field shouldn't include the multiplier that sdhci-msm needs
internally.

Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Link: https://lore.kernel.org/r/20201214092048.v5.2.I7564620993acd4baa63fa0e3925ca879a86d3ee3@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-01 11:54:43 +01:00
Douglas Anderson
a8cd989e1a mmc: sdhci-msm: Warn about overclocking SD/MMC
As talked about in commit 5e4b7e82d4 ("clk: qcom: gcc-sdm845: Use
floor ops for sdcc clks"), most clocks handled by the Qualcomm clock
drivers are rounded _up_ by default instead of down.  We should make
sure SD/MMC clocks are always rounded down in the clock drivers.
Let's add a warning in the Qualcomm SDHCI driver to help catch the
problem.

This would have saved a bunch of time [1].

NOTE: this doesn't actually fix any problems, it just makes it obvious
to devs that there is a problem and that should be an indication to
fix the clock driver.

[1] http://lore.kernel.org/r/20201210102234.1.I096779f219625148900fc984dd0084ed1ba87c7f@changeid

Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20201214092048.v5.1.Iec3430c7d3c2a29262695edef7b82a14aaa567e5@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-01 11:54:42 +01:00
Yangtao Li
3536b82e58 mmc: sunxi: add support for A100 mmc controller
This patch adds support for A100 MMC controller, which use word address
for internal dma.

Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20201211011934.6171-10-andre.przywara@arm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-01 11:54:42 +01:00
Yangtao Li
b79ee3852c dt-bindings: mmc: sunxi: Add Allwinner A100 and H616 compatibles
Add binding for A100's and H616's mmc and emmc controller.

Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20201211011934.6171-9-andre.przywara@arm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-01 11:54:42 +01:00
Jisheng Zhang
5f7dfda4f2 mmc: sdhci-of-dwcmshc: set SDHCI_QUIRK2_PRESET_VALUE_BROKEN
The SDHCI_PRESET_FOR_* registers are not set(all read as zeros), so
set the quirk.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20201210165510.76b917e5@xhacker.debian
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-01 11:54:42 +01:00
Christophe JAILLET
6052b3c370 mmc: usdhi6rol0: Fix a resource leak in the error handling path of the probe
A call to 'ausdhi6_dma_release()' to undo a previous call to
'usdhi6_dma_request()' is missing in the error handling path of the probe
function.

It is already present in the remove function.

Fixes: 75fa9ea6e3 ("mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201217210922.165340-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-01 11:54:42 +01:00
Christophe JAILLET
c9c256a8b0 mmc: sdhci-sprd: Fix some resource leaks in the remove function
'sdhci_remove_host()' and 'sdhci_pltfm_free()' should be used in place of
'mmc_remove_host()' and 'mmc_free_host()'.

This avoids some resource leaks, is more in line with the error handling
path of the probe function, and is more consistent with other drivers.

Fixes: fb8bd90f83 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Orson Zhai <orson.zhai@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20201217204236.163446-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-01 11:54:42 +01:00
Christophe JAILLET
5d15cbf635 mmc: owl-mmc: Fix a resource leak in an error handling path and in the remove function
'dma_request_chan()' calls should be balanced by a corresponding
'dma_release_channel()' call.

Add the missing call both in the error handling path of the probe function
and in the remove function.

Fixes: ff65ffe46d ("mmc: Add Actions Semi Owl SoCs SD/MMC driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201209194202.54099-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-01 11:54:42 +01:00
Christophe JAILLET
0bb7e560f8 mmc: mxs-mmc: Fix a resource leak in an error handling path in 'mxs_mmc_probe()'
If 'mmc_of_parse()' fails, we must undo the previous 'dma_request_chan()'
call.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201208203527.49262-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-01 11:54:41 +01:00
Chao Song
18de2f72b7 soundwire: return earlier if no slave is attached
If there is no slave attached to soundwire bus, we
can return earlier from sdw_bus_prep_clk_stop() and
sdw_bus_exit_clk_stop(), this saves a redundant value
check.

Signed-off-by: Chao Song <chao.song@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210126085439.4349-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 16:10:40 +05:30
Pierre-Louis Bossart
f1b6902612 soundwire: bus: add better dev_dbg to track complete() calls
Add a dev_dbg() log for both enumeration and initialization completion
to better track suspend-resume issues.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210126085402.4264-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 16:10:40 +05:30
Thomas Zimmermann
8180cc3752 drm/gma500: Remove dependency on TTM
The gma500 driver does not use TTM.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-6-tzimmermann@suse.de
2021-02-01 11:28:15 +01:00
Thomas Zimmermann
6455af65e9 drm/gma500: Remove CONFIG_X86 conditionals from source files
Remove the CONFIG_X86 conditionals from the source code. The driver
already depends on X86 in the Kconfig file. Also, no one has been
trying to build it on a non-x86 platform recently, or they would have
noticed that drm_ttm_cache_flush() doesn't exist.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-5-tzimmermann@suse.de
2021-02-01 11:23:42 +01:00
Jani Nikula
6ee8d38125 drm/i915/bios: tidy up child device debug logging
Make the child device details easier to read by turning this:

[drm:parse_ddi_port [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
[drm:parse_ddi_port [i915]] VBT HDMI level shift for port B: 8
[drm:parse_ddi_port [i915]] VBT DP max link rate for port B: 810000
[drm:parse_ddi_port [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
[drm:parse_ddi_port [i915]] VBT HDMI level shift for port C: 8
[drm:parse_ddi_port [i915]] VBT (e)DP boost level for port C: 3
[drm:parse_ddi_port [i915]] VBT HDMI boost level for port C: 1
[drm:parse_ddi_port [i915]] VBT DP max link rate for port C: 810000

into this:

[drm:parse_ddi_port [i915]] Port B VBT info: CRT:0 DVI:1 HDMI:1 DP:0 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
[drm:parse_ddi_port [i915]] Port B VBT HDMI level shift: 8
[drm:parse_ddi_port [i915]] Port B VBT DP max link rate: 810000
[drm:parse_ddi_port [i915]] Port C VBT info: CRT:0 DVI:1 HDMI:1 DP:1 eDP:0 LSPCON:0 USB-Type-C:0 TBT:0 DSC:0
[drm:parse_ddi_port [i915]] Port C VBT HDMI level shift: 8
[drm:parse_ddi_port [i915]] Port C VBT (e)DP boost level: 3
[drm:parse_ddi_port [i915]] Port C VBT HDMI boost level: 1
[drm:parse_ddi_port [i915]] Port C VBT DP max link rate: 810000

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127084534.24406-1-jani.nikula@intel.com
2021-02-01 12:14:21 +02:00
Thomas Zimmermann
837f23bb4b drm/gma500: Drop DRM_GMA3600 config option
With support for the MID-related chips removed, only support for
desktop chips is left in the driver. So just build the complete
driver if DRM_GMA500 has been selected. Anyone who wants to enable
the Poulsbo code would probably also want the Cedarview code.

[Patrik: Fixed conflict due to Oaktrail not being dropped]

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210129095604.32423-4-tzimmermann@suse.de
2021-02-01 11:14:20 +01:00
Ulf Hansson
d7fb9c2420 mmc: sdhci-pltfm: Fix linking err for sdhci-brcmstb
The implementation of sdhci_pltfm_suspend() is only available when
CONFIG_PM_SLEEP is set, which triggers a linking error:

"undefined symbol: sdhci_pltfm_suspend" when building sdhci-brcmstb.c.

Fix this by implementing the missing stubs when CONFIG_PM_SLEEP is unset.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: 5b191dcba7 ("mmc: sdhci-brcmstb: Fix mmc timeout errors on S5 suspend")
Cc: stable@vger.kernel.org
Tested-By: Nicolas Schichan <nschichan@freeebox.fr>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-01 11:13:09 +01:00
Fengnan Chang
f92e04f764 mmc: core: Limit retries when analyse of SDIO tuples fails
When analysing tuples fails we may loop indefinitely to retry. Let's avoid
this by using a 10s timeout and bail if not completed earlier.

Signed-off-by: Fengnan Chang <fengnanchang@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210123033230.36442-1-fengnanchang@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-01 11:13:06 +01:00
Richard Fitzgerald
ba61c36920 dmaengine: xilinx_dma: Alloc tx descriptors GFP_NOWAIT
Use GFP_NOWAIT allocation in xilinx_dma_alloc_tx_descriptor().

This is necessary for compatibility with ALSA, which calls
dmaengine_prep_dma_cyclic() from an atomic context.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210129170800.31857-1-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 15:26:48 +05:30
Laurent Pinchart
55563399bb arm64: dts: zynqmp: Wire up the DisplayPort subsystem
Enable the dpsub device and wire it up to the PS-GTR PHY lanes routed to
the DisplayPort connector.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/9769d4d103b6eb75e3324825117f6832a746004e.1611232558.git.michal.simek@xilinx.com
2021-02-01 10:40:37 +01:00
Michal Simek
b0f89cf5b6 arm64: dts: zynqmp: Add DisplayPort subsystem
Add a DT node for the DisplayPort subsystem, a hard IP present in the
Zynq Ultrascale+ MPSoC.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/4d978aef852cacdfb35aa8e50d648a787e73b90c.1611232558.git.michal.simek@xilinx.com
2021-02-01 10:40:36 +01:00
Laurent Pinchart
7b6714b3ed arm64: dts: zynqmp: Add DPDMA node
Add a DT node for the DisplayPort DMA engine (DPDMA).

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/3d11015512a085592f2aca76eeddc04178d38bbe.1611232558.git.michal.simek@xilinx.com
2021-02-01 10:40:34 +01:00
Michal Simek
1cabd1181f dt-bindings: arm: Fix typo in zcu111 board
Trivial fix.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/13d064fc4850f96904a04e330cea5295d3751e46.1611226560.git.michal.simek@xilinx.com
2021-02-01 10:39:35 +01:00
Sia Jee Heng
f80f7c96f7 dmaengine: dw-axi-dmac: Virtually split the linked-list
AxiDMA driver exposed the dma_set_max_seg_size() to the DMAENGINE.
It shall helps the DMA clients to create size-optimized linked-list
for the controller.

However, there are certain situations where DMA client might not be
abled to benefit from the dma_get_max_seg_size() if the segment size
can't meet the nature of the DMA client's operation.

In the case of ALSA operation, ALSA application and driver expecting
to run in a period of larger than 10ms regardless of the bit depth.
With this large period, there is a strong request to split the linked-list
in the AxiDMA driver.

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-18-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 15:08:16 +05:30
Sia Jee Heng
78a90a1e48 dmaengine: dw-axi-dmac: Set constraint to the Max segment size
Add support for DMA Scatter-Gather (SG) constraint so that DMA clients can
handle the AxiDMA limitation.

Without supporting DMA constraint the default Max segment size reported by
dmaengine is 64KB, which is not supported by Intel KeemBay AxiDMA.

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-17-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 15:08:16 +05:30
Sia Jee Heng
f74b302550 dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA BYTE and HALFWORD registers
Add support for Intel KeemBay AxiDMA BYTE and HALFWORD registers
programming.

Intel KeemBay AxiDMA supports data transfer between device to memory
and memory to device operations.

This code is needed by I2C, I3C, I2S, SPI and UART which uses FIFO
size of 8bits and 16bits to perform memory to device data transfer
operation. 0-padding functionality is provided to avoid
pre-processing of data on CPU.

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-16-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 15:08:16 +05:30
Sia Jee Heng
425c8a53e8 dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA handshake
Add support for Intel KeemBay AxiDMA device handshake programming.
Device handshake number passed in to the AxiDMA shall be written to
the Intel KeemBay AxiDMA hardware handshake registers before DMA
operations are started.

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-15-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 15:08:15 +05:30
Sia Jee Heng
3df2d81f87 dmaengine: dw-axi-dmac: Add Intel KeemBay AxiDMA support
Add support for Intel KeemBay AxiDMA to the .compatible field.
The AxiDMA Apb region will be accessible if the compatible string
matches the "intel,kmb-axi-dma".

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-14-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 15:08:15 +05:30
Sia Jee Heng
cd0f00c39f dmaengine: drivers: Kconfig: add HAS_IOMEM dependency to DW_AXI_DMAC
If HAS_IOMEM is not defined and DW_AXI_DMAC is enabled under COMPILE_TEST,
the build fails with the following error:
dw-axi-dmac-platform.c:(.text+0xc4): undefined reference to
`devm_ioremap_resource'
Link: https://www.spinics.net/lists/dmaengine/msg25188.html

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Link: https://lore.kernel.org/r/20210125013255.25799-13-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 15:08:15 +05:30
Sia Jee Heng
8fb1dae090 dmaengine: dw-axi-dmac: Add Intel KeemBay DMA register fields
Add support for Intel KeemBay DMA registers. These registers are required
to run data transfer between device to memory and memory to device on Intel
KeemBay SoC.

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-12-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 15:08:15 +05:30
Sia Jee Heng
0a35c9a017 dt-binding: dma: dw-axi-dmac: Add support for Intel KeemBay AxiDMA
Add support for Intel KeemBay AxiDMA to the dw-axi-dmac
Schemas DT binding.

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210125013255.25799-11-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 15:08:15 +05:30
Sia Jee Heng
8e55444da6 dmaengine: dw-axi-dmac: Support burst residue granularity
Add support for DMA_RESIDUE_GRANULARITY_BURST so that AxiDMA can report
DMA residue.

Existing AxiDMA driver only support data transfer between
memory to memory operation, therefore reporting DMA residue
to the DMA clients is not supported.

Reporting DMA residue to the DMA clients is important as DMA clients
shall invoke dmaengine_tx_status() to understand the number of bytes
been transferred so that the buffer pointer can be updated accordingly.

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-10-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 15:08:15 +05:30
Sia Jee Heng
b428c6fa41 dmaengine: dw-axi-dmac: Support of_dma_controller_register()
Add support for of_dma_controller_register() so that DMA clients
can pass in device handshake number to the AxiDMA driver.

DMA clients shall code the device handshake number in the Device tree.
When DMA activities are needed, DMA clients shall invoke OF helper
function to pass in the device handshake number to the AxiDMA.

Without register to the of_dma_controller_register(), data transfer
between memory to device and device to memory operations would failed.

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-9-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 15:08:15 +05:30
Sia Jee Heng
1deb96c0fa dmaegine: dw-axi-dmac: Support device_prep_dma_cyclic()
Add support for device_prep_dma_cyclic() callback function to benefit
DMA cyclic client, for example ALSA.

Existing AxiDMA driver only support data transfer between memory to memory.
Data transfer between device to memory and memory to device in cyclic mode
would failed if this interface is not supported by the AxiDMA driver.

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-8-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 15:08:15 +05:30
Sia Jee Heng
eec9176053 dmaengine: dw-axi-dmac: Support device_prep_slave_sg
Add device_prep_slave_sg() callback function so that DMA_MEM_TO_DEV
and DMA_DEV_TO_MEM operations in single mode can be supported.

Existing AxiDMA driver only support data transfer between
memory to memory. Data transfer between device to memory and
memory to device in single mode would failed if this interface
is not supported by the AxiDMA driver.

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-7-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 15:08:15 +05:30
Sia Jee Heng
66c6c9455e dmaengine: dw-axi-dmac: Add device_config operation
Add device_config() callback function so that the device address
can be passed to the dma driver.

DMA clients use this interface to pass in the device address to the
AxiDMA. Without this interface, data transfer between device to memory
and memory to device would failed.

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-6-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 15:08:15 +05:30
Sia Jee Heng
67b2e39f4a dmaengine: dw-axi-dmac: Add device_synchronize() callback
Add support for device_synchronize() callback function to sync with
dmaengine_terminate_sync().

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-5-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 15:08:15 +05:30
Sia Jee Heng
0b9d2fb368 dmaengine: dw-axi-dmac: move dma_pool_create() to alloc_chan_resources()
The DMA memory block is created at driver load time and exist for
device lifetime. Move the dma_pool_create() to the ->chan_resource()
callback function allowing the DMA memory blocks to be created as needed
and destroyed when the channel is freed.

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-4-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 15:08:14 +05:30
Sia Jee Heng
ef6fb2d6f1 dmaengine: dw-axi-dmac: simplify descriptor management
Simplify and refactor the descriptor management by removing the redundant
Linked List Item (LLI) queue control logic from the AxiDMA driver.
The descriptor is split into virtual descriptor and hardware LLI so that
only hardware LLI memories are allocated from the DMA memory pool.

Up to 64 descriptors can be allocated within a PAGE_SIZE compare to 16
descriptors in previous version. This solves the problem where an
ALSA driver expects more than 16 DMA descriptors to run.

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Tested-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://lore.kernel.org/r/20210125013255.25799-3-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 15:08:14 +05:30
Sia Jee Heng
8c70fb7e0a dt-bindings: dma: Add YAML schemas for dw-axi-dmac
YAML schemas Device Tree (DT) binding is the new format for DT to replace
the old format. Introduce YAML schemas DT binding for dw-axi-dmac and
remove the old version.

Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210125013255.25799-2-jee.heng.sia@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-02-01 15:08:14 +05:30
Michal Simek
127b856f67 arm64: dts: zynqmp: Add description for zcu104 revC
Xilinx ZynqMP zcu104 revC and newer board revisions have different i2c
structure compare to revA. The rest of the board is the same from software
perspective.
Also enable DMAs and QSPI.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/17f68c235ea1ce96c3293ca0cf3178951d6663f7.1611224800.git.michal.simek@xilinx.com
2021-02-01 10:37:53 +01:00
Michal Simek
8ac47837f0 arm64: dts: zynqmp: Add missing iommu IDs
Add missing iommu IDs to all IPs which have IDs assigned.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/78afdafdc60c3182318894f2808f7f337a798278.1611224800.git.michal.simek@xilinx.com
2021-02-01 10:36:36 +01:00
Michal Simek
1f9fcf6573 arm64: dts: zynqmp: Add missing lpd watchdog node
Xilinx ZynqMP SoC has FPD (Full Power Domain) and LPD (Low Power Domain)
watchdogs. There are cases where also LPD WDT should be used by Arm cores
that's why list it with disabled status.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/0489a1d5528614f1d570ea153d38b813f0c1eb9f.1611224800.git.michal.simek@xilinx.com
2021-02-01 10:36:35 +01:00
Michal Simek
cbf8bed0e3 arm64: dts: zynqmp: Wire zynqmp qspi controller
Add missing ZynqMP qspi IP. It works in single mode only.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/5cebbc59a452f282c4ce0f0e1dffecadac8f126a.1611224800.git.michal.simek@xilinx.com
2021-02-01 10:36:34 +01:00
Michal Simek
41b452a570 arm64: dts: zynqmp: Wire arasan nand controller
Add missing arasan controller with clocks. Disable it by default. Every
board can enable it with specifying others properties.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/05cc1ce7973ac5200aeca428c137b422c827c5e8.1611224800.git.michal.simek@xilinx.com
2021-02-01 10:36:32 +01:00
Michal Simek
63481699d6 arm64: dts: zynqmp: Add missing mio-bank properties to sdhcis
Add missing xlnx,mio-bank property to sdhci nodes. Also add properties with
0 value to have it listed in case that files are copied to different
projects where default case doesn't need to be handled in the same way.
That's why explicitly list them too.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/dbdfcc1b25af8b28fc658a37ce18902978cb410d.1611224800.git.michal.simek@xilinx.com
2021-02-01 10:36:30 +01:00
Michal Simek
002002c0ad arm64: dts: zynqmp: Add label for zynqmp_ipi
Add label which is used by bootloader for adding bootloader specific flag.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/3dc8416abdd3498e61edcd83830a12af295c5c6d.1611224800.git.michal.simek@xilinx.com
2021-02-01 10:36:28 +01:00
Michal Simek
51733f16c6 arm64: dts: zynqmp: Enable phy driver for Sata on zcu102/zcu104/zcu106
Enable psgtr driver and write clocks property to get sata to work.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/80b52ef97501968ee97fc152363bc4b9b7bb2cff.1611224800.git.michal.simek@xilinx.com
2021-02-01 10:36:26 +01:00
Michal Simek
42cb66dcd5 arm64: dts: zynqmp: Enable reset controller driver
Enable reset controller to be prepared for use.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/4fb62952f61e5046d750fff0e3e469c7abd1d0d0.1611224800.git.michal.simek@xilinx.com
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-01 10:36:13 +01:00
Michal Simek
928a574759 arm64: dts: zynqmp: Enable si5341 driver for zcu102/106/111
Enable si5341 driver is the main chip for providing preprogrammed clocks
for the whole platform.

 # cat /sys/kernel/debug/clk/clk_summary
...
 refhdmi                              1        1        0   114285000          0     0  50000
    xtal_0                            0        0        0   114285000          0     0  50000
       pll_0                          0        0        0 40731174000000          0     0  50000
          clk1_0                      0        0        0    27000000          0     0  50000
          clk0_0                      0        0        0    27000000          0     0  50000
 ref48M                               1        2        0    48000000          0     0  50000
    si5341                            0        4        0    14000000          0     0  50000
       clock-generator.N4             0        0        0           0          0     0  50000
       clock-generator.N3             0        1        0   733260000          0     0  50000
          clock-generator.9           0        1        0    33330000          0     0  50000
       clock-generator.N2             0        1        0   104000000          0     0  50000
          clock-generator.2           0        1        0    26000000          0     0  50000
       clock-generator.N1             0        2        0   594000000          0     0  50000
          clock-generator.7           0        1        0    74250000          0     0  50000
          clock-generator.0           0        1        0    27000000          0     0  50000
       clock-generator.N0             0        4        0  1000000000          0     0  50000
          clock-generator.8           0        0        0           0          0     0  50000
          clock-generator.6           0        1        0   125000000          0     0  50000
          clock-generator.5           0        1        0   100000000          0     0  50000
          clock-generator.4           0        1        0   100000000          0     0  50000
          clock-generator.3           0        1        0   125000000          0     0  50000
          clock-generator.1           0        0        0           0          0     0  50000
...

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/b93f13297684704a60e8d7274009a20aa98d14f7.1611224800.git.michal.simek@xilinx.com
2021-02-01 10:36:09 +01:00