Clear the RTS bits of the flow-control request before determining the
new value when updating the settings.
Signed-off-by: Johan Hovold <johan@kernel.org>
Clearing TIOCM_RTS should always deassert RTS and setting the same bit
should enable auto-RTS if hardware flow control is enabled.
This allows user space to throttle input directly at the source also
when hardware-assisted flow control is enabled and makes dtr_rts()
always deassert both lines during close (when HUPCL is set).
Signed-off-by: Johan Hovold <johan@kernel.org>
Shorten the flow-control debug message by abbreviating the field names
and reducing the value width to two characters. The latter improves
readability since all but the least significant byte will almost always
be zero anyway.
Signed-off-by: Johan Hovold <johan@kernel.org>
Drop the macros used to shift the flow-control settings to make the code
more readable for consistency with the other requests.
Signed-off-by: Johan Hovold <johan@kernel.org>
The vendor request used to set the flow-control settings also sets the
state of the modem-control lines.
Add state variables to keep track of the modem-control lines to avoid
always asserting the lines whenever the flow-control settings are
updated.
This specifically also avoids asserting DTR/RTS when opening a port with
the line speed set to B0.
Signed-off-by: Johan Hovold <johan@kernel.org>
The CP210X_SET_MHS request cannot be used to control RTS when hardware
flow control (auto-RTS) is enabled and instead returns an error which is
currently logged as:
cp210x ttyUSB0: failed set request 0x7 status: -32
when opening and closing a port (and on TIOCMSET requests).
Add a crtscts flag to keep track of the hardware flow-control setting
and use it to suppress any request to change RTS when auto-RTS is
enabled.
Note that RTS is still deasserted when disabling the UART as part of
close.
Reported-by: Pho Tran <pho.tran@silabs.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
The header file of GCE should be for MT8183 SoC instead of MT8173.
Fixes: 91f9c963ce ("arm64: dts: mt8183: Add display nodes for MT8183")
Reported-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20210131101726.804-1-matthias.bgg@kernel.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
When device_type == DEVICE_ALI, we should also check the return
value of pci_iomap() to avoid potential null pointer dereference.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20210131100916.7915-1-dinghao.liu@zju.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Like the patch to disable QSES for HDCP 1.4 over MST
https://patchwork.freedesktop.org/patch/415297/ the HDCP2.2 spec
doesn't require QSES as well and we've seen QSES not supported on a
couple HDCP2.2 docks so far (Dell WD19 and Lenovo LDC-G2)
Remove it for now until we get a better idea of how widely supported
QSES is and how to support it optionally.
Signed-off-by: Juston Li <juston.li@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210127065034.2501119-4-juston.li@intel.com
Nothing too major here, I actually thought I'd sent most of these
right before the new year, but that apparently got lost in the bustle:
- Turing MMU fault recovery fixes
- Fix mDP connectors being reported as eDP to userspace
- Fixes for audio locking, and other bit-rot from DRM changes since
atomic support was written
- Misc other minor fixes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv7yLfhuVbYa-4g0vxVt93OaC7Sodiz2R-TDHu-MoofEdw@mail.gmail.com
The Intel Lightning Mountain (LGM) DMA controller is only present on
Intel Lightning Mountain SoCs. Hence add a dependency on X86, to
prevent asking the user about this driver when configuring a kernel
without Intel Lightning Mountain platform support.
While at it, fix a misspelling of "Intel".
Fixes: 32d31c79a1 ("dmaengine: Add Intel LGM SoC DMA support.")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210129131702.2656060-1-geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DMACs (both SYS-DMAC and RT-DMAC) on R-Car V3U differ slightly from
the DMACs on R-Car Gen2 and other R-Car Gen3 SoCs:
1. The per-channel registers are located in a second register block.
Add support for mapping the second block, using the appropriate
offsets and stride.
2. The common Channel Clear Register (DMACHCLR) was replaced by a
per-channel register.
Update rcar_dmac_chan_clear{,_all}() to handle this.
As rcar_dmac_init() needs to clear the status before the individual
channels are probed, channel index and base address initialization
are moved forward.
Inspired by a patch in the BSP by Phong Hoang
<phong.hoang.wz@renesas.com>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210128084455.2237256-5-geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Extract the code to clear the status of one or all channels into their
own helpers, to prepare for the different handling of the R-Car V3U SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210128084455.2237256-4-geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a helper macro for iterating over all DMAC channels, taking into
account the channel mask. Use it where appropriate, to simplify code.
Restore "reverse Christmas tree" order of local variables while adding a
new variable.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210128084455.2237256-3-geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the compatible value for the Direct Memory Access Controller
blocks in the Renesas R-Car V3U (R8A779A0) SoC.
The most visible difference with DMAC blocks on other R-Car SoCs is the
move of the per-channel registers to a separate register block.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210128084455.2237256-2-geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Simplify the retrieval of getting the match data in the probe
function by directly using of_device_get_match_data() instead
of using of_match_node() and getting data.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
The CFG sub-module is not present on some earlier SoCs like the
DA850/OMAPL-138 in the TI Davinci family. Refactor out the CFG
sub-module parse and initialization logic into a separate function
to make it easier to add logic for the PRUSS IP on the above legacy
SoC families.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Commit db68ce10c4 ("new helper: uaccess_kernel()") replaced
segment_eq(get_fs(), KERNEL_DS) with uaccess_kernel(). But the correct
method for tomoyo to check whether current is a kernel thread in order
to assume that kernel threads are privileged for socket operations was
(current->flags & PF_KTHREAD). Now that uaccess_kernel() became 0 on x86,
tomoyo has to fix this problem. Do like commit 942cb357ae ("Smack:
Handle io_uring kernel thread privileges") does.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
syzbot is reporting that tomoyo's quota check is racy [1]. But this check
is tolerant of some degree of inaccuracy. Thus, teach KCSAN to ignore
this data race.
[1] https://syzkaller.appspot.com/bug?id=999533deec7ba6337f8aa25d8bd1a4d5f7e50476
Reported-by: syzbot <syzbot+0789a72b46fd91431bd8@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Python retired in 2020, and some distributions do not provide the
'python' command any more.
As in commit 51839e29cb ("scripts: switch explicitly to Python 3"),
we need to use more specific 'python3' to invoke scripts even if they
are written in a way compatible with both Python 2 and 3.
This commit removes the variable 'PYTHON', and switches the existing
users to 'PYTHON3'.
BTW, PEP 394 (https://www.python.org/dev/peps/pep-0394/) is a helpful
material.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
An upcoming Dell platform is causing a NULL pointer dereference
in dell-wmi-sysman initialization. Validate that the input from
BIOS matches correct ACPI types and abort module initialization
if it fails.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Tested-by: Perry Yuan <perry_yuan@dell.com>
Link: https://lore.kernel.org/r/20210129172654.2326751-1-mario.limonciello@dell.com
[hdegoede@redhat.com: Drop redundant release_attributes_data() call]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
An upcoming Dell platform is causing a NULL pointer dereference
in dell-wmi-sysman initialization. Validate that the input from
BIOS matches correct ACPI types and abort module initialization
if it fails.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Tested-by: Perry Yuan <perry_yuan@dell.com>
Link: https://lore.kernel.org/r/20210129172654.2326751-1-mario.limonciello@dell.com
[hdegoede@redhat.com: Drop redundant release_attributes_data() call]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
- handle boolean device properties imported from Apple firmware
correctly.
-----BEGIN PGP SIGNATURE-----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=jRKO
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fix from Borislav Petkov:
"A single fix from Lukas: handle boolean device properties imported
from Apple firmware correctly"
* tag 'efi-urgent-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/apple-properties: Reinstate support for boolean properties
toolchains which do not generate section symbols anymore. And a cleanup
ontop.
-----BEGIN PGP SIGNATURE-----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=VV7d
-----END PGP SIGNATURE-----
Merge tag 'x86_entry_for_v5.11_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
"A single fix for objtool to generate proper unwind info for newer
toolchains which do not generate section symbols anymore. And a
cleanup ontop.
This was originally going to go during the next merge window but
people can already trigger a build error with binutils-2.36 which
doesn't emit section symbols - something which objtool relies on - so
let's expedite it"
* tag 'x86_entry_for_v5.11_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Remove put_ret_addr_in_rdi THUNK macro argument
x86/entry: Emit a symbol for register restoring thunk
the recent UIP handling changes the time readout of non-existent RTCs hangs
forever as the read returns always 0xFF which means the UIP bit is
set. Sanity check the RTC before registering by checking the RTC_VALID
register for correctness.
-----BEGIN PGP SIGNATURE-----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=Q1FX
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A fix for handling advertised, but non-existent 146818 RTCs correctly.
With the recent UIP handling changes the time readout of non-existent
RTCs hangs forever as the read returns always 0xFF which means the UIP
bit is set.
Sanity check the RTC before registering by checking the RTC_VALID
register for correctness"
* tag 'timers-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rtc: mc146818: Detect and handle broken RTCs
condition wrong when moving SYSCALL_EMU away from TIF flags.
-----BEGIN PGP SIGNATURE-----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=WMj1
-----END PGP SIGNATURE-----
Merge tag 'core-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull single stepping fix from Thomas Gleixner:
"A single fix for the single step reporting regression caused by
getting the condition wrong when moving SYSCALL_EMU away from TIF
flags"
[ There's apparently another problem too, fix pending ]
* tag 'core-urgent-2021-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Unbreak single step reporting behaviour
One fix for a bug in our soft interrupt masking, which could lead to interrupt
replaying recursing, causing spurious interrupts.
Thanks to:
Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----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=hC+4
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"One fix for a bug in our soft interrupt masking, which could lead to
interrupt replaying recursing, causing spurious interrupts.
Thanks to Nicholas Piggin"
* tag 'powerpc-5.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: prevent recursive replay_soft_interrupts causing superfluous interrupt
1. Trigger the unplug event in msm_dp_display_disable() to shutdown audio
properly.
2. Reset the completion before signal the disconnect event.
Fixes: 158b9aa744 ("drm/msm/dp: wait for audio notification before disabling clocks")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
fix semicolon.cocci warnings:
drivers/gpu/drm/msm/dp/dp_ctrl.c:1161:2-3: Unneeded semicolon
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Rob Clark <robdclark@chromium.org>
fix semicolon.cocci warnings:
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:752:2-3: Unneeded semicolon
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fix below warnings reported by coccicheck:
./drivers/gpu/drm/msm/msm_gem.c:991:3-9: WARNING: NULL check before some
freeing functions is not needed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Lockdep complains about an AA deadlock when rebooting the device.
base-commit: 19c329f680
============================================
WARNING: possible recursive locking detected
5.4.91 #1 Not tainted
--------------------------------------------
reboot/5213 is trying to acquire lock:
ffffff80d13391b0 (&kms->commit_lock[i]){+.+.}, at: lock_crtcs+0x60/0xa4
but task is already holding lock:
ffffff80d1339110 (&kms->commit_lock[i]){+.+.}, at: lock_crtcs+0x60/0xa4
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&kms->commit_lock[i]);
lock(&kms->commit_lock[i]);
*** DEADLOCK ***
May be due to missing lock nesting notation
6 locks held by reboot/5213:
__arm64_sys_reboot+0x148/0x2a0
device_shutdown+0x10c/0x2c4
drm_atomic_helper_shutdown+0x48/0xfc
modeset_lock+0x120/0x24c
lock_crtcs+0x60/0xa4
stack backtrace:
CPU: 4 PID: 5213 Comm: reboot Not tainted 5.4.91 #1
Hardware name: Google Pompom (rev1) with LTE (DT)
Call trace:
dump_backtrace+0x0/0x1dc
show_stack+0x24/0x30
dump_stack+0xfc/0x1a8
__lock_acquire+0xcd0/0x22b8
lock_acquire+0x1ec/0x240
__mutex_lock_common+0xe0/0xc84
mutex_lock_nested+0x48/0x58
lock_crtcs+0x60/0xa4
msm_atomic_commit_tail+0x348/0x570
commit_tail+0xdc/0x178
drm_atomic_helper_commit+0x160/0x168
drm_atomic_commit+0x68/0x80
This is because lockdep thinks all the locks taken in lock_crtcs() are
the same lock, when they actually aren't. That's because we call
mutex_init() in msm_kms_init() and that assigns one static key for every
lock initialized in this loop. Let's allocate a dynamic number of
lock_class_keys and assign them to each lock so that lockdep can figure
out an AA deadlock isn't possible here.
Fixes: b3d91800d9 ("drm/msm: Fix race condition in msm driver with async layer updates")
Cc: Krishna Manikandan <mkrishn@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Now that the bug is fixed in the minimal way for stable, go make the
code table-driven.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Now that we're not racing with GPU setup, also fix races of timestamps
against other timestamps. In freedreno CI, we were seeing this path trigger
timeouts on setting the GMU bit, producing:
[drm:_a6xx_gmu_set_oob] *ERROR* Timeout waiting for GMU OOB set GPU_SET: 0x0
and this triggered especially on the first set of tests right after
boot (it's probably easier to lose the race than one might think,
given that we start many tests in parallel, and waiting for NFS to
page in code probably means that lots of tests hit the same point of
screen init at the same time). As of this patch, the message seems to
have completely gone away.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 4b565ca5a2 ("drm/msm: Add A6XX device support")
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
We were using the same force-poweron bit in the two codepaths, so they
could race to have one of them lose GPU power early.
freedreno CI was seeing intermittent errors like:
[drm:_a6xx_gmu_set_oob] *ERROR* Timeout waiting for GMU OOB set GPU_SET: 0x0
and this issue could have contributed to it.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 4b565ca5a2 ("drm/msm: Add A6XX device support")
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Before the offending commit in msm_atomic_commit_tail wait_flush was
called once per frame, after the commit was submitted. After it
wait_flush is also called at the beginning to ensure previous
potentially async commits are done.
For cmd panels the source of wait_flush is a ping-pong irq notifying
a completion. The completion needs to be notified with complete_all so
multiple waiting parties (new async committers) can proceed.
Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com>
Suggested-by: Rob Clark <robdclark@gmail.com>
Fixes: 2d99ced787 ("drm/msm: async commit support")
Signed-off-by: Rob Clark <robdclark@chromium.org>
The previous registers were *almost* correct, but instead of
PHYs, they were pointing at DSI PLLs, resulting in the PHY id
autodetection failing miserably.
Fixes: dcefc117cc ("drm/msm/dsi: Add support for msm8x94")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
SM8250 has quite unique qseed lut type: qseed3lite, which is a
lightweight version of qseed3 scaler.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
There is HPD unplug interrupts missed at scenario of an irq_hpd
followed by unplug interrupts with around 10 ms in between.
Since both AUX_SW_RESET and DP_SW_RESET clear pending HPD interrupts,
irq_hpd handler should not issues either aux or sw reset to avoid
following unplug interrupt be cleared accidentally. This patch
also postpone handling of irq_hpd until connected state if it
happened at connection pending state.
Changes in V2:
-- add postpone handling of irq_hpd until connected state
-- check DP_TRAINING_1 instead of DP_TRAINING_NONE
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The call to dpu_encoder_phys_cmd_prepare_for_kickoff is useless as
it's unused because the serialize_wait4pp variable is never set to
true by .. anything, literally: remove the call.
While at it, also reduce indentation by inverting the check for
dpu_encoder_phys_cmd_is_master.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
When configuring the tearcheck, the parameters for the engine were
being set mostly as they should've been, but then it wasn't getting
configured to get the vsync indication from the TE GPIO input
because it was assumed that autorefresh could be enabled:
since a previous commit makes sure to disable the autorefresh bit
when committing to the cmd engine, it is now safe to just enable
the vsync pin input at tearcheck setup time (instead of erroneously
never enabling it).
Also, set the right sync_cfg_height to enable the DPU auto-generated
TE signal in order to avoid stalls in the event that we miss one
external TE signal: this will still trigger recovery mechanisms in
case the display is really unreachable.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>