De-duplicate some code that is used by both READDIR and READDIRPLUS
to build the dirlist in the Reply. Because this code is not related
to decoding READ arguments, it is moved to a more appropriate spot.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Code inspection shows that the server's NFSv3 READDIR implementation
handles offset cookies slightly differently than the NFSv2 READDIR,
NFSv3 READDIRPLUS, and NFSv4 READDIR implementations,
and there doesn't seem to be any need for this difference.
As a clean up, I copied the logic from nfsd3_proc_readdirplus().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
As part of the update, open code that sanity-checks the size of the
data payload against the length of the RPC Call message has to be
re-implemented to use xdr_stream infrastructure.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The code that sets up rq_vec is refactored so that it is now
adjacent to the nfsd_read() call site where it is used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Clean up: The unit of XDR alignment is defined by RFC 4506,
not as part of the RPC message header. Thus it belongs in
include/linux/sunrpc/xdr.h.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The next few patches will employ these strings to help make server-
side trace logs more human-readable. A similar technique is already
in use in kernel RPC client code.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
There are certain conditional expressions in rtl8821ae, where a boolean
variable is compared with true/false, in forms such as (foo == true) or
(false != bar), which does not comply with checkpatch.pl (CHECK:
BOOL_COMPARISON), according to which boolean variables should be
themselves used in the condition, rather than comparing with true/false
E.g., in drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c,
"if (rtlefuse->autoload_failflag == false)" can be replaced with
"if (!rtlefuse->autoload_failflag)"
Replace all such expressions with the bool variables appropriately
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210110121525.2407-6-yashsri421@gmail.com
There are certain conditional expressions in rtl8192se, where a boolean
variable is compared with true/false, in forms such as (foo == true) or
(false != bar), which does not comply with checkpatch.pl (CHECK:
BOOL_COMPARISON), according to which boolean variables should be
themselves used in the condition, rather than comparing with true/false
Replace all such expressions with the bool variables appropriately
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210110121525.2407-5-yashsri421@gmail.com
There are certain conditional expressions in rtl8188ee, where a boolean
variable is compared with true/false, in forms such as (foo == true) or
(false != bar), which does not comply with checkpatch.pl (CHECK:
BOOL_COMPARISON), according to which boolean variables should be
themselves used in the condition, rather than comparing with true/false
E.g., in drivers/net/wireless/realtek/rtlwifi/rtl8188ee/dm.c,
"if (mac->act_scanning == true)" can be replaced with
"if (mac->act_scanning)"
Replace all such expressions with the bool variables appropriately
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210110121525.2407-4-yashsri421@gmail.com
There are certain conditional expressions in rtl8192c-common, where a
boolean variable is compared with true/false, in forms such as
(foo == true) or (false != bar), which does not comply with checkpatch.pl
(CHECK: BOOL_COMPARISON), according to which boolean variables should be
themselves used in the condition, rather than comparing with true/false
E.g., in drivers/net/wireless/realtek/rtlwifi/rtl8192c/dm_common.c,
"else if (initialized == false) {" can be replaced with
"else if (!initialized) {"
Replace all such expressions with the bool variables appropriately
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210110121525.2407-3-yashsri421@gmail.com
There are certain conditional expressions in rtl_pci, where a boolean
variable is compared with true/false, in forms such as (foo == true) or
(false != bar), which does not comply with checkpatch.pl (CHECK:
BOOL_COMPARISON), according to which boolean variables should be
themselves used in the condition, rather than comparing with true/false
E.g., in drivers/net/wireless/realtek/rtlwifi/ps.c,
"if (find_p2p_ie == true)" can be replaced with "if (find_p2p_ie)"
Replace all such expressions with the bool variables appropriately
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210110121525.2407-2-yashsri421@gmail.com
Sometimes regulator_get() gets called twice for the same supply on the
same device. This may happen e.g. when a framework / library is used
which uses the regulator; and the driver itself also needs to enable
the regulator in some cases where the framework will not enable it.
Commit ff268b56ce ("regulator: core: Don't spew backtraces on
duplicate sysfs") already takes care of the backtrace which would
trigger when creating a duplicate consumer symlink under
/sys/class/regulator/regulator.%d in this scenario.
Commit c33d442328 ("debugfs: make error message a bit more verbose")
causes a new error to get logged in this scenario:
[ 26.938425] debugfs: Directory 'wm5102-codec-MICVDD' with parent 'spi-WM510204:00-MICVDD' already present!
There is no _nowarn variant of debugfs_create_dir(), but we can detect
and avoid this problem by checking the return value of the earlier
sysfs_create_link_nowarn() call.
Add a check for the earlier sysfs_create_link_nowarn() failing with
-EEXIST and skip the debugfs_create_dir() call in that case, avoiding
this error getting logged.
Fixes: c33d442328 ("debugfs: make error message a bit more verbose")
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210122183250.370571-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DHCOM SoM uSD slot has an optional voltage level translator, add
DT bindings which permit the MMCI driver to detect the translator
automatically.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Ludovic Barre <ludovic.barre@st.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-stm32@st-md-mailman.stormreply.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add "init" mux option for SDMMC1, where the CMD, CK, CKIN lines are not
configured, so they can be claimed as GPIOs early on in driver probe().
This is used for probing optional voltage level translator.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Ludovic Barre <ludovic.barre@st.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-stm32@st-md-mailman.stormreply.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
We've had several reports of broken dependencies. The 'right' fix is
to revisit the module dependencies as suggested by Arnd Bergmann. This
is WIP at https://github.com/thesofproject/linux/pull/2683. Since this
is taking longer than expected, I am only sharing quick fixes for now.
Pierre-Louis Bossart (2):
ASoC: SOF: Intel: soundwire: fix select/depend unmet dependencies
ASoC: SOF: SND_INTEL_DSP_CONFIG dependency
sound/soc/sof/intel/Kconfig | 3 ++-
sound/soc/sof/sof-acpi-dev.c | 11 ++++++-----
sound/soc/sof/sof-pci-dev.c | 10 ++++++----
3 files changed, 14 insertions(+), 10 deletions(-)
--
2.25.1
If we find an entry without an SKB, we currently continue, but
that will just result in an infinite loop since we won't increment
the read pointer, and will try the same thing over and over again.
Fix this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.abe2dedcc3ac.Ia6b03f9eeb617fd819e56dd5376f4bb8edc7b98a@changeid
If we get into a problem severe enough to attempt a reprobe,
we schedule a worker to do that. However, if the problem gets
more severe and the device is actually destroyed before this
worker has a chance to run, we use a free device. Bump up the
reference count of the device until the worker runs to avoid
this situation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.871f0892e4b2.I94819e11afd68d875f3e242b98bef724b8236f1e@changeid
In D3 resume flow, avoid the following race where sending
packets before updating the sequence number (sequence
number received from the wowlan status command response):
Thread 1:
__iwl_mvm_resume clears IWL_MVM_STATUS_IN_D3 and is cut
by thread 2 before reaching iwl_mvm_query_wakeup_reasons.
Thread 2:
iwl_mvm_mac_itxq_xmit calls iwl_mvm_tx_skb since
IWL_MVM_STATUS_IN_D3 is not set using a wrong sequence number.
Thread 1:
__iwl_mvm_resume continues and calls iwl_mvm_query_wakeup_reasons
updating the sequence number received from the firmware.
The next packet that will be sent now will cause sysassert 0x1096.
Fix the bug by moving 'clear IWL_MVM_STATUS_IN_D3' to after
sending the wowlan status command and updating the sequence
number.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.fe927ec939c6.I103d3321fb55da7e6c6c51582cfadf94eb8b6c58@changeid
Having sta_id not set for aux_sta and snif_sta can potentially lead to a
hard to debug issue in case remove station is called without an add. In
this case sta_id 0, an unrelated regular station, will be removed.
In fact, we do have a FW assert that occures rarely and from the debug
data analysis it looks like sta_id 0 is removed by mistake, though it's
hard to pinpoint the exact flow. The WARN_ON in this patch should help
to find it.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.5dc6dd9b22d5.I2add1b5ad24d0d0a221de79d439c09f88fcaf15d@changeid
The return type value of functions 1 and 2 were considered to be an
integer inside a buffer, but they can also be only an integer, without
the buffer. Fix the code in iwl_acpi_get_dsm_u8() to handle it as a
single integer value, as well as packed inside a buffer.
Signed-off-by: Matt Chen <matt.chen@intel.com>
Fixes: 9db93491f2 ("iwlwifi: acpi: support device specific method (DSM)")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210122144849.5757092adcd6.Ic24524627b899c9a01af38107a62a626bdf5ae3a@changeid
Information pid/vid of WSDA-200-USB, Lord corporation company:
vid: 199b
pid: ba30
Signed-off-by: Pho Tran <pho.tran@silabs.com>
[ johan: amend comment with product name ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
If we spin for a long time in memory reads that (for some reason in
hardware) take a long time, then we'll eventually get messages such
as
watchdog: BUG: soft lockup - CPU#2 stuck for 24s! [kworker/2:2:272]
This is because the reading really does take a very long time, and
we don't schedule, so we're hogging the CPU with this task, at least
if CONFIG_PREEMPT is not set, e.g. with CONFIG_PREEMPT_VOLUNTARY=y.
Previously I misinterpreted the situation and thought that this was
only going to happen if we had interrupts disabled, and then fixed
this (which is good anyway, however), but that didn't always help;
looking at it again now I realized that the spin unlock will only
reschedule if CONFIG_PREEMPT is used.
In order to avoid this issue, change the code to cond_resched() if
we've been spinning for too long here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 04516706bb ("iwlwifi: pcie: limit memory read spin time")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130253.217a9d6a6a12.If964cb582ab0aaa94e81c4ff3b279eaafda0fd3f@changeid
There's no reason to use ktime_get() since we don't need any better
precision than jiffies, and since we no longer disable interrupts
around this code (when grabbing NIC access), jiffies will work fine.
Use jiffies instead of ktime_get().
This cleanup is preparation for the following patch "iwlwifi: pcie: reschedule
in long-running memory reads". The code gets simpler with the weird clock use
etc. removed before we add cond_resched().
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130253.621c948b1fad.I3ee9f4bc4e74a0c9125d42fb7c35cd80df4698a1@changeid
To avoid completion timeouts during device boot, set up the
LTR timeouts on more devices - similar to what we had before
for AX210.
This also corrects the AX210 workaround to be done only on
discrete (non-integrated) devices, otherwise the registers
have no effect.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: edb625208d ("iwlwifi: pcie: set LTR to avoid completion timeout")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.fb819e19530b.I0396f82922db66426f52fbb70d32a29c8fd66951@changeid
The code was really awkward, we would first dereference
txq->entries when calling iwl_txq_genX_tfd_unmap and then
we would check that txq->entries is non-NULL.
Fix that by exiting if txq->entries is NULL.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.173359fc236d.I75c7c2397d20df8d7fbc24cb16a5232d5c551889@changeid
I noticed that the flow that triggers an NMI on the firmware
for old devices (tested on 7265) doesn't work.
Apparently, the firmware / device is still in low power when
we write the register that triggers the NMI. We call the
"grab_nic_access" function to make sure the device is awake
but that wasn't enough. I played with this and noticed that
if we wait 1 ms after the device reports it is awake before
we write to the NMI register, the device always sees our
write and the firmware gets properly asserted.
Triggering an NMI to the firmware can be done with the
debugfs hook:
echo 1 > /sys/kernel/debug/iwlwifi/0000\:00\:03.0/iwlmvm/fw_nmi
What happened before is that the firmware would just stall
without running its NMI routine. Because of that the driver
wouldn't get the "firmware crashed" interrupt. After a while
the driver would notice that the firmware is not responding
to some command and it would read the error data from the
firmware, but this data is populated in the NMI service
routine in the firmware which was not called. So in the logs
it looked like:
iwlwifi 0000:00:03.0: Error sending REPLY_ERROR: time out after 2000ms.
iwlwifi 0000:00:03.0: Current CMD queue read_ptr 33 write_ptr 34
iwlwifi 0000:00:03.0: Loaded firmware version: 29.09bd31e1.0 7265D-29.ucode
iwlwifi 0000:00:03.0: 0x00000000 | ADVANCED_SYSASSERT
iwlwifi 0000:00:03.0: 0x00000000 | trm_hw_status0
iwlwifi 0000:00:03.0: 0x00000000 | trm_hw_status1
iwlwifi 0000:00:03.0: 0x00000000 | branchlink2
iwlwifi 0000:00:03.0: 0x00000000 | interruptlink1
iwlwifi 0000:00:03.0: 0x00000000 | interruptlink2
iwlwifi 0000:00:03.0: 0x00000000 | data1
iwlwifi 0000:00:03.0: 0x00000000 | data2
iwlwifi 0000:00:03.0: 0x00000000 | data3
iwlwifi 0000:00:03.0: 0x00000000 | beacon time
iwlwifi 0000:00:03.0: 0x00000000 | tsf low
...
With this fix, immediately after we trigger the NMI to the
firmware, we get the expected:
iwlwifi 0000:00:03.0: Microcode SW error detected. Restarting 0x2000000.
iwlwifi 0000:00:03.0: Start IWL Error Log Dump:
iwlwifi 0000:00:03.0: Status: 0x00000040, count: 6
iwlwifi 0000:00:03.0: Loaded firmware version: 29.09bd31e1.0 7265D-29.ucode
iwlwifi 0000:00:03.0: 0x00000084 | NMI_INTERRUPT_UNKNOWN
iwlwifi 0000:00:03.0: 0x000002F1 | trm_hw_status0
iwlwifi 0000:00:03.0: 0x00000000 | trm_hw_status1
iwlwifi 0000:00:03.0: 0x00043D6C | branchlink2
iwlwifi 0000:00:03.0: 0x0004AFD6 | interruptlink1
iwlwifi 0000:00:03.0: 0x000008C4 | interruptlink2
iwlwifi 0000:00:03.0: 0x00000000 | data1
iwlwifi 0000:00:03.0: 0x00000080 | data2
iwlwifi 0000:00:03.0: 0x07030000 | data3
iwlwifi 0000:00:03.0: 0x003FD4C3 | beacon time
iwlwifi 0000:00:03.0: 0x00C22AC3 | tsf low
iwlwifi 0000:00:03.0: 0x00000000 | tsf hi
iwlwifi 0000:00:03.0: 0x00000000 | time gp1
iwlwifi 0000:00:03.0: 0x00C22AC3 | time gp2
iwlwifi 0000:00:03.0: 0x00000001 | uCode revision type
iwlwifi 0000:00:03.0: 0x0000001D | uCode version major
Notice the first line: "Microcode SW error detected:" which
is printed in the driver's ISR, which means that the driver
actually got an interrupt from the firmware saying that it
crashed. And then we have the properly populated error data.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.70e67cc75d88.I6615cad4361862e7f3c9f2d3cafb6a8c61e16781@changeid
If loading the PNVM file failed on the first try during the
interface up, the file is unlikely to show up later, and we
already don't try to reload it if it changes, so just don't
try loading it again and again.
This also fixes some issues where we may try to load it at
resume time, which may not be possible yet.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 6972592850 ("iwlwifi: read and parse PNVM file")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.5ac6828a0bbe.I7d308358b21d3c0c84b1086999dbc7267f86e219@changeid
If we erroneously try to set the PNVM data again after it has
already been set, we could leak the old DMA memory. Avoid that
and warn, we shouldn't be doing this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: 6972592850 ("iwlwifi: read and parse PNVM file")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.929c2d680429.I086b9490e6c005f3bcaa881b617e9f61908160f3@changeid
In the new CSA flow, we remain associated during CSA, but
still do a unbind-bind to the vif. However, sending the power
command right after when vif is unbound but still associated
causes FW to assert (0x3400) since it cannot tell the LMAC id.
Just skip this command, we will send it again in a bit, when
assigning the new context.
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20210115130252.64a2254ac5c3.Iaa3a9050bf3d7c9cd5beaf561e932e6defc12ec3@changeid
Smatch complains that "count" is not clamped when "ff->dev_lock_changed"
and it leads to an information leak. Fortunately, that's not actually
possible and the condition can be deleted.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/YA6n6I8EcNAO5ZFs@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Smatch complains that "count" isn't clamped properly and
"oxfw->dev_lock_changed" is false then it leads to an information
leak. But it turns out that "oxfw->dev_lock_changed" is always
set and the condition can be removed.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/YA6ntkBxT/4DJ4YK@mwanda
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds suspend/resume support so that it is possible to
configure the LDOs and BUCKs as on or off during suspend phase as
well as to configure suspend specific voltages.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Link: https://lore.kernel.org/r/4c2e79d4fa96befdc9a6c59c3ff27b0a34f9fb56.camel@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The recovery func can recover multiple journals, but they were all using
the same bio. This resulted in use-after-free related to sdp->sd_log_bio.
This patch moves the variable to the journal descriptor, jd, so that
every recovery can operate on its own bio. And hopefully we never run out.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
If go_free is defined, function signal_our_withdraw is supposed to
synchronize on the GLF_FREEING flag of the inode glock, but it
accidentally does that on the live glock. Fix that and disambiguate
the glock variables.
Fixes: 601ef0d52e ("gfs2: Force withdraw to replay journals and wait for it to finish")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
This reverts commit 428fd95d85.
Patch 428fd95d85b2 added a call to log_flush_wait to function
gfs2_log_flush. Then gfs2_log_flush calls log_write_header which submits
a write request with the REQ_PREFLUSH flag which also forces it to wait.
This patch removes the unnecessary call to log_flush_wait.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>