Commit graph

1,169,205 commits

Author SHA1 Message Date
Scott Branden
7367e0ad77 misc: bcm-vk: add ioctl load_image
Add ioctl support to issue load_image operation to VK card.

Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Co-developed-by: James Hu <james.hu@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: James Hu <james.hu@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-8-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-25 18:44:44 +01:00
Scott Branden
22c30607d1 misc: bcm-vk: add open/release
Add open/release to replace private data with context for other methods
to use.  Reason for the context is because it is allowed for multiple
sessions to open sysfs.  For each file open, when upper layer queries the
response, only those that are tied to a specified open should be returned.

Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-7-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-25 18:44:44 +01:00
Scott Branden
af22527e82 misc: bcm-vk: add triggers when host panic or reboots to notify card
Pass down an interrupt to card in case of panic or reboot so
that card can take appropriate action to perform a clean reset.
Uses kernel notifier block either directly (register on panic list),
or implicitly (add shutdown method for PCI device).

Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-6-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-25 18:44:44 +01:00
Scott Branden
bfc53e01d2 misc: bcm-vk: add misc device to Broadcom VK driver
Add misc device base support to create and remove devnode.
Additional misc functions for open/read/write/release/ioctl/sysfs, etc
will be added in follow on commits to allow for individual review.

Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-5-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-25 18:44:44 +01:00
Scott Branden
064ffc7c39 misc: bcm-vk: add autoload support
Add support to load and boot images on card automatically.
The kernel module parameter auto_load can be passed in as false to disable
such support on probe.
As well, nr_scratch_pages can be specified to allocate more or less scratch
memory on init as needed for desired card operation.

Co-developed-by: Desmond Yan <desmond.yan@broadcom.com>
Co-developed-by: James Hu <james.hu@broadcom.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Desmond Yan <desmond.yan@broadcom.com>
Signed-off-by: James Hu <james.hu@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-4-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-25 18:44:44 +01:00
Scott Branden
522f692686 misc: bcm-vk: add Broadcom VK driver
Add initial version of Broadcom VK driver to enumerate PCI device IDs
of Valkyrie and Viper device IDs.

VK based cards provide real-time high performance, high throughput,
low latency offload compute engine operations.
They are used for multiple parallel offload tasks as:
audio, video and image processing and crypto operations.

Further commits add additional features to driver beyond probe/remove.

Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-3-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-25 18:44:44 +01:00
Scott Branden
8822276264 bcm-vk: add bcm_vk UAPI
Add user space api for bcm-vk driver.

Provide ioctl api to load images and issue reset command to card.
FW status registers in PCI BAR space also defined as part
of API so that user space is able to interpret these memory locations
as needed via direct PCIe access.

Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Link: https://lore.kernel.org/r/20210120175827.14820-2-scott.branden@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-25 18:44:44 +01:00
Josef Bacik
2f96e40212 btrfs: fix possible free space tree corruption with online conversion
While running btrfs/011 in a loop I would often ASSERT() while trying to
add a new free space entry that already existed, or get an EEXIST while
adding a new block to the extent tree, which is another indication of
double allocation.

This occurs because when we do the free space tree population, we create
the new root and then populate the tree and commit the transaction.
The problem is when you create a new root, the root node and commit root
node are the same.  During this initial transaction commit we will run
all of the delayed refs that were paused during the free space tree
generation, and thus begin to cache block groups.  While caching block
groups the caching thread will be reading from the main root for the
free space tree, so as we make allocations we'll be changing the free
space tree, which can cause us to add the same range twice which results
in either the ASSERT(ret != -EEXIST); in __btrfs_add_free_space, or in a
variety of different errors when running delayed refs because of a
double allocation.

Fix this by marking the fs_info as unsafe to load the free space tree,
and fall back on the old slow method.  We could be smarter than this,
for example caching the block group while we're populating the free
space tree, but since this is a serious problem I've opted for the
simplest solution.

CC: stable@vger.kernel.org # 4.9+
Fixes: a5ed918285 ("Btrfs: implement the free space B-tree")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-01-25 18:44:37 +01:00
Baoquan He
56c91a1843 kernel: kexec: remove the lock operation of system_transition_mutex
Function kernel_kexec() is called with lock system_transition_mutex
held in reboot system call. While inside kernel_kexec(), it will
acquire system_transition_mutex agin. This will lead to dead lock.

The dead lock should be easily triggered, it hasn't caused any
failure report just because the feature 'kexec jump' is almost not
used by anyone as far as I know. An inquiry can be made about who
is using 'kexec jump' and where it's used. Before that, let's simply
remove the lock operation inside CONFIG_KEXEC_JUMP ifdeffery scope.

Fixes: 55f2503c3b ("PM / reboot: Eliminate race between reboot and suspend")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Pingfan Liu <kernelfans@gmail.com>
Cc: 4.19+ <stable@vger.kernel.org> # 4.19+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-25 18:40:37 +01:00
Krzysztof Wilczyński
42814c438a PCI: mediatek: Add missing of_node_put() to fix reference leak
The for_each_available_child_of_node helper internally makes use of the
of_get_next_available_child() which performs an of_node_get() on each
iteration when searching for next available child node.

Should an available child node be found, then it would return a device
node pointer with reference count incremented, thus early return from
the middle of the loop requires an explicit of_node_put() to prevent
reference count leak.

To stop the reference leak, explicitly call of_node_put() before
returning after an error occurred.

Link: https://lore.kernel.org/r/20210120184810.3068794-1-kw@linux.com
Signed-off-by: Krzysztof Wilczyński <kw@linux.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-01-25 17:33:28 +00:00
Tian Tao
7d614ab2f2 drm/etnaviv: fix NULL check before some freeing functions is not needed
fixed the below warning:
drivers/gpu/drm/etnaviv/etnaviv_gem_prime.c:84:2-8: WARNING: NULL check
before some freeing functions is not needed.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
2021-01-25 18:29:48 +01:00
Pan Bian
ae191d2e51 PCI: xilinx-cpm: Fix reference count leak on error path
Also drop the reference count of the node on error path.

Link: https://lore.kernel.org/r/20210120143745.699-1-bianpan2016@163.com
Fixes: 508f610648 ("PCI: xilinx-cpm: Add Versal CPM Root Port driver")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2021-01-25 17:27:41 +00:00
Christoph Fritz
4288b4ccda
regulator: pf8x00: set ramp_delay for bucks
This patch sets ramp_delay for bucks to the max value given by the
datasheet.

Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Reviewed-by: Adrien Grassein <adrien.grassein@gmail.com>
Link: https://lore.kernel.org/r/60d8eb8feefd26380cc9c6503f835e569be90465.camel@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-25 17:17:56 +00:00
Dmitry Osipenko
ed9ce1ed22
ASoC: tegra: ahub: Reset hardware properly
Assert hardware resets before clocks are enabled and then de-assert them
after clocks are enabled. This brings hardware into a predictable state.

Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 audio works
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 boot-tested
Tested-by: Dmitry Osipenko <digetx@gmail.com> # Nexus7 T30 audio works
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # TK1 boot-tested
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210120003154.26749-7-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-25 17:17:55 +00:00
Dmitry Osipenko
6d8ac9b1dd
ASoC: tegra: ahub: Use clk_bulk helpers
Use clk_bulk helpers to make code cleaner.

Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 audio works
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 boot-tested
Tested-by: Dmitry Osipenko <digetx@gmail.com> # Nexus7 T30 audio works
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # TK1 boot-tested
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210120003154.26749-6-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-25 17:17:54 +00:00
Dmitry Osipenko
24a41a38dd
ASoC: tegra: ahub: Add missing resets
AHUB driver misses D_AUDIO and APBIF resets. CPU hangs on trying to
access hardware if resets aren't de-asserted. This problem is currently
masked by the tegra-clk driver which implicitly de-asserts the resets when
the corresponding clocks are enabled. Soon the implicit de-assertion will
be gone from the tegra-clk driver, thus we need to fix the AHUB driver.
Add the missing resets to the driver.

Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 audio works
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 boot-tested
Tested-by: Dmitry Osipenko <digetx@gmail.com> # Nexus7 T30 audio works
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # TK1 boot-tested
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210120003154.26749-5-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-25 17:17:53 +00:00
Steven J. Magnani
63c9e47a16 udf: fix silent AED tagLocation corruption
When extending a file, udf_do_extend_file() may enter following empty
indirect extent. At the end of udf_do_extend_file() we revert prev_epos
to point to the last written extent. However if we end up not adding any
further extent in udf_do_extend_file(), the reverting points prev_epos
into the header area of the AED and following updates of the extents
(in udf_update_extents()) will corrupt the header.

Make sure that we do not follow indirect extent if we are not going to
add any more extents so that returning back to the last written extent
works correctly.

Link: https://lore.kernel.org/r/20210107234116.6190-2-magnani@ieee.org
Signed-off-by: Steven J. Magnani <magnani@ieee.org>
Signed-off-by: Jan Kara <jack@suse.cz>
2021-01-25 18:09:25 +01:00
Pan Bian
0a6dc67a6a isofs: release buffer head before return
Release the buffer_head before returning error code in
do_isofs_readdir() and isofs_find_entry().

Fixes: 2deb1acc65 ("isofs: fix access to unallocated memory when reading corrupted filesystem")
Link: https://lore.kernel.org/r/20210118120455.118955-1-bianpan2016@163.com
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2021-01-25 17:57:38 +01:00
Robert Marko
e14775aa2f ARM: dts: qcom: ipq4019: add SDHCI VQMMC LDO node
Since we now have driver for the SDHCI VQMMC LDO needed
for I/0 voltage levels lets introduce the necessary node for it.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Link: https://lore.kernel.org/r/20200907101937.10155-1-robert.marko@sartura.hr
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-25 10:50:39 -06:00
Dmitry Osipenko
d17655759b reset: Add devm_reset_control_get_optional_exclusive_released()
NVIDIA Tegra DRM and media drivers will need a resource-managed-optional
variant of reset_control_get_exclusive_released() in order to switch away
from a legacy Tegra-specific PD API to a GENPD API without much hassle.
Add the new reset helper to the reset API.

Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-01-25 17:32:10 +01:00
Yanan Wang
509552e65a KVM: arm64: Mark the page dirty only if the fault is handled successfully
We now set the pfn dirty and mark the page dirty before calling fault
handlers in user_mem_abort(), so we might end up having spurious dirty
pages if update of permissions or mapping has failed. Let's move these
two operations after the fault handlers, and they will be done only if
the fault has been handled successfully.

When an -EAGAIN errno is returned from the map handler, we hope to the
vcpu to enter guest directly instead of exiting back to userspace, so
adjust the return value at the end of function.

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210114121350.123684-4-wangyanan55@huawei.com
2021-01-25 16:30:20 +00:00
Yanan Wang
694d071f8d KVM: arm64: Filter out the case of only changing permissions from stage-2 map path
(1) During running time of a a VM with numbers of vCPUs, if some vCPUs
access the same GPA almost at the same time and the stage-2 mapping of
the GPA has not been built yet, as a result they will all cause
translation faults. The first vCPU builds the mapping, and the followed
ones end up updating the valid leaf PTE. Note that these vCPUs might
want different access permissions (RO, RW, RX, RWX, etc.).

(2) It's inevitable that we sometimes will update an existing valid leaf
PTE in the map path, and we perform break-before-make in this case.
Then more unnecessary translation faults could be caused if the
*break stage* of BBM is just catched by other vCPUS.

With (1) and (2), something unsatisfactory could happen: vCPU A causes
a translation fault and builds the mapping with RW permissions, vCPU B
then update the valid leaf PTE with break-before-make and permissions
are updated back to RO. Besides, *break stage* of BBM may trigger more
translation faults. Finally, some useless small loops could occur.

We can make some optimization to solve above problems: When we need to
update a valid leaf PTE in the map path, let's filter out the case where
this update only change access permissions, and don't update the valid
leaf PTE here in this case. Instead, let the vCPU enter back the guest
and it will exit next time to go through the relax_perms path without
break-before-make if it still wants more permissions.

Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210114121350.123684-3-wangyanan55@huawei.com
2021-01-25 16:30:20 +00:00
Yanan Wang
8ed80051c8 KVM: arm64: Adjust partial code of hyp stage-1 map and guest stage-2 map
Procedures of hyp stage-1 map and guest stage-2 map are quite different,
but they are tied closely by function kvm_set_valid_leaf_pte().
So adjust the relative code for ease of code maintenance in the future.

Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210114121350.123684-2-wangyanan55@huawei.com
2021-01-25 16:30:20 +00:00
Jiaxun Yang
9d56653d14 ACPI: platform-profile: Drop const qualifier for cur_profile
Drop the const qualifier from the static global cur_profile
pointer declaration.

This is a preparation patch for passing the cur_profile pointer as
parameter to the profile_get() and profile_set() callbacks so that
drivers dynamically allocating their driver-data struct, with their
platform_profile_handler struct embedded, can use this pointer to
get to their driver-data.

Note this also requires dropping the const from the pprof
platform_profile_register() function argument. Dropping this
const is not a problem, non of the queued up consumers of
platform_profile_register() actually pass in a const pointer.

Link: https://lore.kernel.org/linux-acpi/5e7a4d87-52ef-e487-9cc2-8e7094beaa08@redhat.com/
Link: https://lore.kernel.org/r/20210114073429.176462-2-jiaxun.yang@flygoat.com
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
[ hdegoede@redhat.com: Also remove const from platform_profile_register() ]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-25 17:30:10 +01:00
Jan Höppner
ac55ad2b5f s390/dasd: Fix inconsistent kobject removal
Our intention was to only remove path kobjects whenever a device is
being set offline. However, one corner case was missing.

If a device is disabled and enabled (using the IOCTLs BIODASDDISABLE and
BIODASDENABLE respectively), the enabling process will call
dasd_eckd_reload_device() which itself calls dasd_eckd_read_conf() in
order to update path information. During that update,
dasd_eckd_clear_conf_data() clears all old data and also removes all
kobjects. This will leave us with an inconsistent state of path kobjects
and a subsequent path verification leads to a failing kobject creation.

Fix this by removing kobjects only in the context of offlining a device
as initially intended.

Fixes: 19508b2047 ("s390/dasd: Display FC Endpoint Security information via sysfs")
Reported-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25 09:22:16 -07:00
Rafael J. Wysocki
81b704d3e4 ACPI: thermal: Do not call acpi_thermal_check() directly
Calling acpi_thermal_check() from acpi_thermal_notify() directly
is problematic if _TMP triggers Notify () on the thermal zone for
which it has been evaluated (which happens on some systems), because
it causes a new acpi_thermal_notify() invocation to be queued up
every time and if that takes place too often, an indefinite number of
pending work items may accumulate in kacpi_notify_wq over time.

Besides, it is not really useful to queue up a new invocation of
acpi_thermal_check() if one of them is pending already.

For these reasons, rework acpi_thermal_notify() to queue up a thermal
check instead of calling acpi_thermal_check() directly and only allow
one thermal check to be pending at a time.  Moreover, only allow one
acpi_thermal_check_fn() instance at a time to run
thermal_zone_device_update() for one thermal zone and make it return
early if it sees other instances running for the same thermal zone.

While at it, fold acpi_thermal_check() into acpi_thermal_check_fn(),
as it is only called from there after the other changes made here.

[This issue appears to have been exposed by commit 6d25be5782
 ("sched/core, workqueues: Distangle worker accounting from rq
 lock"), but it is unclear why it was not visible earlier.]

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208877
Reported-by: Stephen Berman <stephen.berman@gmx.net>
Diagnosed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Stephen Berman <stephen.berman@gmx.net>
Cc: All applicable <stable@vger.kernel.org>
2021-01-25 17:20:16 +01:00
Andrew Scull
87b26801f0 KVM: arm64: Simplify __kvm_hyp_init HVC detection
The arguments for __do_hyp_init are now passed with a pointer to a
struct which means there are scratch registers available for use. Thanks
to this, we no longer need to use clever, but hard to read, tricks that
avoid the need for scratch registers when checking for the
__kvm_hyp_init HVC.

Tested-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210125145415.122439-2-ascull@google.com
2021-01-25 16:16:16 +00:00
Kai-Heng Feng
36af2d5c44 ACPI: sysfs: Prefer "compatible" modalias
Commit 8765c5ba19 ("ACPI / scan: Rework modalias creation when
"compatible" is present") may create two "MODALIAS=" in one uevent
file if specific conditions are met.

This breaks systemd-udevd, which assumes each "key" in one uevent file
to be unique. The internal implementation of systemd-udevd overwrites
the first MODALIAS with the second one, so its kmod rule doesn't load
the driver for the first MODALIAS.

So if both the ACPI modalias and the OF modalias are present, use the
latter to ensure that there will be only one MODALIAS.

Link: https://github.com/systemd/systemd/pull/18163
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Fixes: 8765c5ba19 ("ACPI / scan: Rework modalias creation when "compatible" is present")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: 4.1+ <stable@vger.kernel.org> # 4.1+
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-25 17:06:14 +01:00
Pavel Begunkov
c42bca92be bio: don't copy bvec for direct IO
The block layer spends quite a while in blkdev_direct_IO() to copy and
initialise bio's bvec. However, if we've already got a bvec in the input
iterator it might be reused in some cases, i.e. when new
ITER_BVEC_FLAG_FIXED flag is set. Simple tests show considerable
performance boost, and it also reduces memory footprint.

Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25 08:58:24 -07:00
Pavel Begunkov
3e1a88ec96 bio: add a helper calculating nr segments to alloc
Add a helper function calculating the number of bvec segments we need to
allocate to construct a bio. It doesn't change anything functionally,
but will be used to not duplicate special cases in the future.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25 08:58:24 -07:00
Pavel Begunkov
54c8195b4e iov_iter: optimise bvec iov_iter_advance()
iov_iter_advance() is heavily used, but implemented through generic
means. For bvecs there is a specifically crafted function for that, so
use bvec_iter_advance() instead, it's faster and slimmer.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25 08:58:24 -07:00
Christoph Hellwig
ecd7fba0ad target/file: allocate the bvec array as part of struct target_core_file_cmd
This saves one memory allocation, and ensures the bvecs aren't freed
before the AIO completion.  This will allow the lower level code to be
optimized so that it can avoid allocating another bvec array.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25 08:58:24 -07:00
Pavel Begunkov
0cf41e5e9b block/psi: remove PSI annotations from direct IO
Direct IO does not operate on the current working set of pages managed
by the kernel, so it should not be accounted as memory stall to PSI
infrastructure.

The block layer and iomap direct IO use bio_iov_iter_get_pages()
to build bios, and they are the only users of it, so to avoid PSI
tracking for them clear out BIO_WORKINGSET flag. Do same for
dio_bio_submit() because fs/direct_io constructs bios by hand directly
calling bio_add_page().

Reported-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25 08:58:24 -07:00
Pavel Begunkov
9b2e0016d0 bvec/iter: disallow zero-length segment bvecs
zero-length bvec segments are allowed in general, but not handled by bio
and down the block layer so filtered out. This inconsistency may be
confusing and prevent from optimisations. As zero-length segments are
useless and places that were generating them are patched, declare them
not allowed.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25 08:58:24 -07:00
Pavel Begunkov
0f1d344feb splice: don't generate zero-len segement bvecs
iter_file_splice_write() may spawn bvec segments with zero-length. In
preparation for prohibiting them, filter out by hand at splice level.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-25 08:58:24 -07:00
Andrew Scull
e500b805c3 KVM: arm64: Don't clobber x4 in __do_hyp_init
arm_smccc_1_1_hvc() only adds write contraints for x0-3 in the inline
assembly for the HVC instruction so make sure those are the only
registers that change when __do_hyp_init is called.

Tested-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210125145415.122439-3-ascull@google.com
2021-01-25 15:50:35 +00:00
Pan Bian
28a758c861 Bluetooth: Put HCI device if inquiry procedure interrupts
Jump to the label done to decrement the reference count of HCI device
hdev on path that the Inquiry procedure is interrupted.

Fixes: 3e13fa1e1f ("Bluetooth: Fix hci_inquiry ioctl usage")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25 16:14:58 +01:00
Pan Bian
5a3ef03afe Bluetooth: drop HCI device reference before return
Call hci_dev_put() to decrement reference count of HCI device hdev if
fails to duplicate memory.

Fixes: 0b26ab9dce ("Bluetooth: AMP: Handle Accept phylink command status evt")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25 16:13:52 +01:00
Howard Chung
bf6a4e30ff Bluetooth: disable advertisement filters during suspend
This adds logic to disable and reenable advertisement filters during
suspend and resume. After this patch, we would only receive packets from
devices in allow list during suspend.

Signed-off-by: Howard Chung <howardchung@google.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25 16:07:37 +01:00
Archie Pusaka
58ceb1e6d6 Bluetooth: advmon offload MSFT interleave scanning integration
When MSFT extension is supported, we don't have to interleave the scan
as we could just do allowlist scan.

Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25 16:07:36 +01:00
Archie Pusaka
394566bf1e Bluetooth: advmon offload MSFT handle filter enablement
Implements the feature to disable/enable the filter used for
advertising monitor on MSFT controller, effectively have the same
effect as "remove all monitors" and "add all previously removed
monitors".

This feature would be needed when suspending, where we would not want
to get packets from anything outside the allowlist. Note that the
integration with the suspending part is not included in this patch.

Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Yun-Hao Chung <howardchung@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25 16:07:36 +01:00
Archie Pusaka
4a37682c6b Bluetooth: advmon offload MSFT handle controller reset
When the controller is powered off, the registered advertising monitor
is removed from the controller. This patch handles the re-registration
of those monitors when the power is on.

Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Yun-Hao Chung <howardchung@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25 16:07:36 +01:00
Archie Pusaka
66bd095ab5 Bluetooth: advmon offload MSFT remove monitor
Implements the monitor removal functionality for advertising monitor
offloading to MSFT controllers. Supply handle = 0 to remove all
monitors.

Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Yun-Hao Chung <howardchung@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25 16:07:36 +01:00
Archie Pusaka
a2a4dedf88 Bluetooth: advmon offload MSFT add monitor
Enables advertising monitor offloading to the controller, if MSFT
extension is supported. The kernel won't adjust the monitor parameters
to match what the controller supports - that is the user space's
responsibility.

This patch only manages the addition of monitors. Monitor removal is
going to be handled by another patch.

Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Manish Mandlik <mmandlik@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Yun-Hao Chung <howardchung@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25 16:07:36 +01:00
Archie Pusaka
b4a221ea8a Bluetooth: advmon offload MSFT add rssi support
MSFT needs rssi parameter for monitoring advertisement packet,
therefore we should supply them from mgmt. This adds a new opcode
to add advertisement monitor with rssi parameters.

Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Manish Mandlik <mmandlik@chromium.org>
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Yun-Hao Chung <howardchung@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25 16:07:36 +01:00
Claire Chang
7f9f2c3f7d Bluetooth: hci_h5: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for btrtl
Realtek Bluetooth controllers can do both LE scan and BR/EDR inquiry
at once, need to set HCI_QUIRK_SIMULTANEOUS_DISCOVERY quirk.

Signed-off-by: Claire Chang <tientzu@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-01-25 16:02:09 +01:00
Stanislaw Gruszka
4832bb371c iwl4965: do not process non-QOS frames on txq->sched_retry path
We have already WARN_ON(!qc) for non-QOS frame on txq->sched_retry path,
but we continue to process, what makes no sense since tid is not
initialized. Non QOS frame should never happen when aggregation
is enabled on queue, so do not process that.

Patch should fix smatch warning:
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2822 il4965_hdl_tx() error: uninitialized symbol 'tid'.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210119100621.439134-1-stf_xl@wp.pl
2021-01-25 16:43:27 +02:00
Lorenzo Bianconi
f43fcaef87 mt7601u: process tx URBs with status EPROTO properly
Similar to commit 0e40dbd56d ("mt7601u: process URBs in status EPROTO
properly"), do not process tx URBs if marked with status set to EPROTO.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/72392e8341aa8591c0b9962661a6ca26b1198f32.1610919534.git.lorenzo@kernel.org
2021-01-25 16:42:41 +02:00
Tony Lindgren
cb88d01b67 wlcore: Fix command execute failure 19 for wl12xx
We can currently get a "command execute failure 19" error on beacon loss
if the signal is weak:

wlcore: Beacon loss detected. roles:0xff
wlcore: Connection loss work (role_id: 0).
...
wlcore: ERROR command execute failure 19
...
WARNING: CPU: 0 PID: 1552 at drivers/net/wireless/ti/wlcore/main.c:803
...
(wl12xx_queue_recovery_work.part.0 [wlcore])
(wl12xx_cmd_role_start_sta [wlcore])
(wl1271_op_bss_info_changed [wlcore])
(ieee80211_prep_connection [mac80211])

Error 19 is defined as CMD_STATUS_WRONG_NESTING from the wlcore firmware,
and seems to mean that the firmware no longer wants to see the quirk
handling for WLCORE_QUIRK_START_STA_FAILS done.

This quirk got added with commit 18eab43070 ("wlcore: workaround
start_sta problem in wl12xx fw"), and it seems that this already got fixed
in the firmware long time ago back in 2012 as wl18xx never had this quirk
in place to start with.

As we no longer even support firmware that early, to me it seems that it's
safe to just drop WLCORE_QUIRK_START_STA_FAILS to fix the error. Looks
like earlier firmware got disabled back in 2013 with commit 0e284c074e
("wl12xx: increase minimum singlerole firmware version required").

If it turns out we still need WLCORE_QUIRK_START_STA_FAILS with any
firmware that the driver works with, we can simply revert this patch and
add extra checks for firmware version used.

With this fix wlcore reconnects properly after a beacon loss.

Cc: Raz Bouganim <r-bouganim@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210115065613.7731-1-tony@atomide.com
2021-01-25 16:42:12 +02:00
Lorenzo Bianconi
2a9269b1cd mt7601u: use ieee80211_rx_list to pass frames to the network stack as a batch
Similar to mt76 driver, rely on ieee80211_rx_list in order to
improve icache footprint

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/5c72fa2dda45c1ae3f285af80c02f3db23341d85.1610580222.git.lorenzo@kernel.org
2021-01-25 16:41:44 +02:00