In preparation for adding an TRACE_IRQFLAGS dependent skip function to
check_redundant(), move it below the TRACE_IRQFLAGS #ifdef.
While there, provide a stub function to reduce #ifdef usage.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Some __bfs() walks will have additional iteration constraints (beyond
the path being strong). Provide an additional function to allow
terminating graph walks.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
The local_lock_t's are special, because they cannot form IRQ
inversions, make sure we can tell them apart from the rest of the
locks.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
These tests are added for two purposes:
* Test the implementation of wait context checks and related
annotations.
* Semi-document the rules for wait context nesting when
PROVE_RAW_LOCK_NESTING=y.
The test cases are only avaible for PROVE_RAW_LOCK_NESTING=y, as wait
context checking makes more sense for that configuration.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201208103112.2838119-5-boqun.feng@gmail.com
The registers used to determine which die a pci bus belongs to don't
contain enough information to uniquely specify more than 8 dies, so
when more than 8 dies are present, use NUMA information instead.
Continue to use the previous method for 8 or fewer because it
works there, and covers cases of NUMA being disabled.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lkml.kernel.org/r/20210108153549.108989-3-steve.wahl@hpe.com
The phys_id isn't really used other than to map to a logical die id.
Calculate the logical die id earlier, and store that instead of the
phys_id.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lkml.kernel.org/r/20210108153549.108989-2-steve.wahl@hpe.com
Use the task_current() function where appropriate.
No functional change.
Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/20201030173223.GA52339@rlk
Active balance is triggered for a number of voluntary cases like misfit
or pinned tasks cases but also after that a number of load balance
attempts failed to migrate a task. There is no need to use active load
balance when the group is overloaded because an overloaded state means
that there is at least one waiting task. Nevertheless, the waiting task
is not selected and detached until the threshold becomes higher than its
load. This threshold increases with the number of failed lb (see the
condition if ((load >> env->sd->nr_balance_failed) > env->imbalance) in
detach_tasks()) and the waiting task will end up to be selected after a
number of attempts.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20210107103325.30851-4-vincent.guittot@linaro.org
Setting LBF_ALL_PINNED during active load balance is only valid when there
is only 1 running task on the rq otherwise this ends up increasing the
balance interval whereas other tasks could migrate after the next interval
once they become cache-cold as an example.
LBF_ALL_PINNED flag is now always set it by default. It is then cleared
when we find one task that can be pulled when calling detach_tasks() or
during active migration.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20210107103325.30851-3-vincent.guittot@linaro.org
Don't waste time checking whether an idle cfs_rq could be the busiest
queue. Furthermore, this can end up selecting a cfs_rq with a high load
but being idle in case of migrate_load.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lkml.kernel.org/r/20210107103325.30851-2-vincent.guittot@linaro.org
CPU (root cfs_rq) estimated utilization (util_est) is currently used in
dequeue_task_fair() to drive frequency selection before it is updated.
with:
CPU_util : rq->cfs.avg.util_avg
CPU_util_est : rq->cfs.avg.util_est
CPU_utilization : max(CPU_util, CPU_util_est)
task_util : p->se.avg.util_avg
task_util_est : p->se.avg.util_est
dequeue_task_fair():
/* (1) CPU_util and task_util update + inform schedutil about
CPU_utilization changes */
for_each_sched_entity() /* 2 loops */
(dequeue_entity() ->) update_load_avg() -> cfs_rq_util_change()
-> cpufreq_update_util() ->...-> sugov_update_[shared\|single]
-> sugov_get_util() -> cpu_util_cfs()
/* (2) CPU_util_est and task_util_est update */
util_est_dequeue()
cpu_util_cfs() uses CPU_utilization which could lead to a false (too
high) utilization value for schedutil in task ramp-down or ramp-up
scenarios during task dequeue.
To mitigate the issue split the util_est update (2) into:
(A) CPU_util_est update in util_est_dequeue()
(B) task_util_est update in util_est_update()
Place (A) before (1) and keep (B) where (2) is. The latter is necessary
since (B) relies on task_util update in (1).
Fixes: 7f65ea42eb ("sched/fair: Add util_est on top of PELT")
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/1608283672-18240-1-git-send-email-xuewen.yan94@gmail.com
SCHED_SOFTIRQ is raised to trigger periodic load balancing. When CPU is not
active, CPU should not participate in load balancing.
The scheduler uses nohz.idle_cpus_mask to keep track of the CPUs which can
do idle load balancing. When bringing a CPU up the CPU is added to the mask
when it reaches the active state, but on teardown the CPU stays in the mask
until it goes offline and invokes sched_cpu_dying().
When SCHED_SOFTIRQ is raised on a !active CPU, there might be a pending
softirq when stopping the tick which triggers a warning in NOHZ code. The
SCHED_SOFTIRQ can also be raised by the scheduler tick which has the same
issue.
Therefore remove the CPU from nohz.idle_cpus_mask when it is marked
inactive and also prevent the scheduler_tick() from raising SCHED_SOFTIRQ
after this point.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/20201215104400.9435-1-anna-maria@linutronix.de
Several parts of the kernel are already using the effective CPU
utilization (as seen by the scheduler) to get the current load on the
CPU, do the same here instead of depending on the idle time of the CPU,
which isn't that accurate comparatively.
This is also the right thing to do as it makes the cpufreq governor
(schedutil) align better with the cpufreq_cooling driver, as the power
requested by cpufreq_cooling governor will exactly match the next
frequency requested by the schedutil governor since they are both using
the same metric to calculate load.
This was tested on ARM Hikey6220 platform with hackbench, sysbench and
schbench. None of them showed any regression or significant
improvements. Schbench is the most important ones out of these as it
creates the scenario where the utilization numbers provide a better
estimate of the future.
Scenario 1: The CPUs were mostly idle in the previous polling window of
the IPA governor as the tasks were sleeping and here are the details
from traces (load is in %):
Old: thermal_power_cpu_get_power: cpus=00000000,000000ff freq=1200000 total_load=203 load={{0x35,0x1,0x0,0x31,0x0,0x0,0x64,0x0}} dynamic_power=1339
New: thermal_power_cpu_get_power: cpus=00000000,000000ff freq=1200000 total_load=600 load={{0x60,0x46,0x45,0x45,0x48,0x3b,0x61,0x44}} dynamic_power=3960
Here, the "Old" line gives the load and requested_power (dynamic_power
here) numbers calculated using the idle time based implementation, while
"New" is based on the CPU utilization from scheduler.
As can be clearly seen, the load and requested_power numbers are simply
incorrect in the idle time based approach and the numbers collected from
CPU's utilization are much closer to the reality.
Scenario 2: The CPUs were busy in the previous polling window of the IPA
governor:
Old: thermal_power_cpu_get_power: cpus=00000000,000000ff freq=1200000 total_load=800 load={{0x64,0x64,0x64,0x64,0x64,0x64,0x64,0x64}} dynamic_power=5280
New: thermal_power_cpu_get_power: cpus=00000000,000000ff freq=1200000 total_load=708 load={{0x4d,0x5c,0x5c,0x5b,0x5c,0x5c,0x51,0x5b}} dynamic_power=4672
As can be seen, the idle time based load is 100% for all the CPUs as it
took only the last window into account, but in reality the CPUs aren't
that loaded as shown by the utilization numbers.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lkml.kernel.org/r/9c255c83d78d58451abc06848001faef94c87a12.1607400596.git.viresh.kumar@linaro.org
There is nothing schedutil specific in schedutil_cpu_util(), rename it
to effective_cpu_util(). Also create and expose another wrapper
sched_cpu_util() which can be used by other parts of the kernel, like
thermal core (that will be done in a later commit).
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/db011961fb3bb8bef1c0eda5cd64564637d3ef31.1607400596.git.viresh.kumar@linaro.org
Fix the following errors:
divers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c:
In function ‘hibmc_hw_map’:
drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.c:213:25:
error: ‘dev’ undeclared (first use in this function);
Fixes: 4d4dad21cc ("drm/hibmc: Remove references to struct drm_device.pdev")
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1610529568-25754-1-git-send-email-tiantao6@hisilicon.com
Commit c318840fb2 ("USB: Gadget: dummy-hcd: Fix shift-out-of-bounds
bug") messed up the way dummy-hcd handles requests to turn on the
RESET port feature (I didn't notice that the original switch case
ended with a fallthrough). The call to set_link_state() was
inadvertently removed, as was the code to set the USB_PORT_STAT_RESET
flag when the speed is USB2.
In addition, the original code never checked whether the port was
connected before handling the port-reset request. There was a check
for the port being powered, but it was removed by that commit! In
practice this doesn't matter much because the kernel doesn't try to
reset disconnected ports, but it's still bad form.
This patch fixes these problems by changing the fallthrough to break,
adding back in the missing set_link_state() call, setting the
port-reset status flag, adding a port-is-connected test, and removing
a redundant assignment statement.
Fixes: c318840fb2 ("USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug")
CC: <stable@vger.kernel.org>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20210113194510.GA1290698@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This new field was added to struct dwc3_scratchpad_array, but
a documentation for it was missed:
../drivers/usb/dwc3/core.h:1259: warning: Function parameter or member 'gadget_max_speed' not described in 'dwc3'
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Felipe Balbi <balbi@kernel.org>
Link: https://lore.kernel.org/r/e9332e31bec9bcead2c7ced2b25462120488ca85.1610610444.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some users questioned why Vendor Test LMP Received event was enabled.
The driver currently doesn't handle this event. Let's disable it to
avoid confusion.
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/4e785ba5d5e95801b6fcf96116f6090216e70760.1610596478.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function drm_need_swiotbl() needs mem_encrypt_active() from
<linux/mem_encrypt.h>. The include got lost when refactoring the
code recently.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 3abc667063 ("drm: Implement drm_need_swiotlb() in drm_cache.c")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210114080535.17132-1-tzimmermann@suse.de
There are a number of functions that "init" pps in various ways. Try to
find some more consistency in the naming.
Rename:
- intel_dp_init_panel_power_sequencer -> pps_init_delays
- intel_dp_init_panel_power_sequencer_registers -> pps_init_registers
- intel_dp_init_panel_power_timestamps -> pps_init_timestamps
as this is what the functions do. Skip the intel_ prefix here to
emphasize these are static and not exported.
No functional changes.
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/15260c28060f3f90276ab395da4d3999ccdb641f.1610127741.git.jani.nikula@intel.com
Add an "encoder reset" call to hide some more pps functions, and clean
up the callers. A minor functional change is not holding the pps lock
across the whole operation in intel_dp_encoder_reset, but instead doing
it in two steps.
v2: rename intel_pps_reinit to intel_pps_encoder_reset for clarity
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/84a50f2700b19c6719cd3e1e931c64f1e2027551.1610127741.git.jani.nikula@intel.com
A function has a different name between their prototype
and its kernel-doc markup:
../drivers/reset/core.c:888: warning: expecting prototype for device_reset(). Prototype was for __device_reset() instead
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
In a long overdue refactoring, split out all panel sequencer code from
intel_dp.c to new intel_pps.[ch].
The first part is mostly just code movement as-is, without cleanups or
functional changes.
We need to add a vlv_get_dpll() helper to get at the vlv/chv dpll from
pps code.
v2: Rebase.
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/14cc59d5734432ad976cd49ff8efce8fa413e5b2.1610127741.git.jani.nikula@intel.com
Always prefer the kernel types over stdint types in i915.
Cc: Imre Deak <imre.deak@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113141158.25513-1-jani.nikula@intel.com
The first member of struct tcan4x5x_map_buf is the struct tcan4x5x_buf_cmd,
which has a size of 4 bytes. It's followed by an array of u8. The compiler
places the array directly after the struct tcan4x5x_buf_cmd.
This patch removes the not needed attribute __packed from the struct
tcan4x5x_map_buf.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20210113203955.912916-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Call skb_tx_timestamp() within can_put_echo_skb() so that a software tx
timestamp gets attached to the skb.
There two main reasons to include this call in can_put_echo_skb():
* It easily allow to enable the tx timestamp on all devices with
just one small change.
* According to Documentation/networking/timestamping.rst, the tx
timestamps should be generated in the device driver as close as possible,
but always prior to passing the packet to the network interface. During the
call to can_put_echo_skb(), the skb gets cloned meaning that the driver
should not dereference the skb variable anymore after can_put_echo_skb()
returns. This makes can_put_echo_skb() the very last place we can use the
skb without having to access the echo_skb[] array.
Remark: by default, skb_tx_timestamp() does nothing. It needs to be activated
by passing the SOF_TIMESTAMPING_TX_SOFTWARE flag either through socket options
or control messages.
References:
* Support for the error queue in CAN RAW sockets (which is needed for
tx timestamps) was introduced in:
https://git.kernel.org//torvalds/c/eb88531bdbfaafb827192d1fc6c5a3fcc4fadd96
* Put the call to skb_tx_timestamp() just before adding it to the
array:
https://lore.kernel.org/r/043c3ea1-6bdd-59c0-0269-27b2b5b36cec@victronenergy.com
* About Tx hardware timestamps
https://lore.kernel.org/r/20210111171152.GB11715@hoboy.vegasvil.org
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20210112095437.6488-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In order to implement byte queue limits (bql) in CAN drivers, the length of the
CAN frame needs to be passed into the networking stack after queueing and after
transmission completion.
To avoid to calculate this length twice, extend can_rx_offload_get_echo_skb()
to return that value. Convert all users of this function, too.
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20210111141930.693847-15-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In order to implement byte queue limits (bql) in CAN drivers, the length of the
CAN frame needs to be passed into the networking stack after queueing and after
transmission completion.
To avoid to calculate this length twice, extend can_get_echo_skb() to return
that value. Convert all users of this function, too.
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20210111141930.693847-14-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add a frame_len argument to can_put_echo_skb() which is used to save length of
the CAN frame into field frame_len of struct can_skb_priv so that it can be
later used after transmission completion. Convert all users of this function,
too.
Drivers which implement BQL call can_put_echo_skb() with the output of
can_skb_get_frame_len(skb) and drivers which do not simply pass zero as an
input (in the same way that NULL would be given to can_get_echo_skb()). This
way, we have a nice symmetry between the two echo functions.
Link: https://lore.kernel.org/r/20210111061335.39983-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20210111141930.693847-13-mkl@pengutronix.de
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
In order to implement byte queue limits (bql) in CAN drivers, the length of the
CAN frame needs to be passed into the networking stack after queueing and after
transmission completion.
To avoid to calculate this length twice, extend the struct can_skb_priv to hold
the length of the CAN frame and extend __can_get_echo_skb() to return that
value.
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20210111141930.693847-12-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds the function can_skb_get_frame_len() which returns the length
of a CAN frame on the data link layer, including Start-of-frame, Identifier,
various other bits, the actual data, the CRC, the End-of-frame, the Inter frame
spacing.
Co-developed-by: Arunachalam Santhanam <arunachalam.santhanam@in.bosch.com>
Signed-off-by: Arunachalam Santhanam <arunachalam.santhanam@in.bosch.com>
Co-developed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Co-developed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20210111141930.693847-11-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>