LLD always splits sections with LTO, which increases module sizes. This
change adds linker script rules to merge the split sections in the final
module.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-6-samitolvanen@google.com
This change limits function inlining across translation unit boundaries
in order to reduce the binary size with LTO. The -import-instr-limit
flag defines a size limit, as the number of LLVM IR instructions, for
importing functions from other TUs, defaulting to 100.
Based on testing with arm64 defconfig, we found that a limit of 5 is a
reasonable compromise between performance and binary size, reducing the
size of a stripped vmlinux by 11%.
Suggested-by: George Burgess IV <gbiv@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-5-samitolvanen@google.com
With CONFIG_MODVERSIONS, version information is linked into each
compilation unit that exports symbols. With LTO, we cannot use this
method as all C code is compiled into LLVM bitcode instead. This
change collects symbol versions into .symversions files and merges
them in link-vmlinux.sh where they are all linked into vmlinux.o at
the same time.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-4-samitolvanen@google.com
This change adds build system support for Clang's Link Time
Optimization (LTO). With -flto, instead of ELF object files, Clang
produces LLVM bitcode, which is compiled into native code at link
time, allowing the final binary to be optimized globally. For more
details, see:
https://llvm.org/docs/LinkTimeOptimization.html
The Kconfig option CONFIG_LTO_CLANG is implemented as a choice,
which defaults to LTO being disabled. To use LTO, the architecture
must select ARCH_SUPPORTS_LTO_CLANG and support:
- compiling with Clang,
- compiling all assembly code with Clang's integrated assembler,
- and linking with LLD.
While using CONFIG_LTO_CLANG_FULL results in the best runtime
performance, the compilation is not scalable in time or
memory. CONFIG_LTO_CLANG_THIN enables ThinLTO, which allows
parallel optimization and faster incremental builds. ThinLTO is
used by default if the architecture also selects
ARCH_SUPPORTS_LTO_CLANG_THIN:
https://clang.llvm.org/docs/ThinLTO.html
To enable LTO, LLVM tools must be used to handle bitcode files, by
passing LLVM=1 and LLVM_IAS=1 options to make:
$ make LLVM=1 LLVM_IAS=1 defconfig
$ scripts/config -e LTO_CLANG_THIN
$ make LLVM=1 LLVM_IAS=1
To prepare for LTO support with other compilers, common parts are
gated behind the CONFIG_LTO option, and LTO can be disabled for
specific files by filtering out CC_FLAGS_LTO.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201211184633.3213045-3-samitolvanen@google.com
Arnd found a randconfig that produces the warning:
arch/x86/entry/thunk_64.o: warning: objtool: missing symbol for insn at
offset 0x3e
when building with LLVM_IAS=1 (Clang's integrated assembler). Josh
notes:
With the LLVM assembler not generating section symbols, objtool has no
way to reference this code when it generates ORC unwinder entries,
because this code is outside of any ELF function.
The limitation now being imposed by objtool is that all code must be
contained in an ELF symbol. And .L symbols don't create such symbols.
So basically, you can use an .L symbol *inside* a function or a code
segment, you just can't use the .L symbol to contain the code using a
SYM_*_START/END annotation pair.
Fangrui notes that this optimization is helpful for reducing image size
when compiling with -ffunction-sections and -fdata-sections. I have
observed on the order of tens of thousands of symbols for the kernel
images built with those flags.
A patch has been authored against GNU binutils to match this behavior
of not generating unused section symbols ([1]), so this will
also become a problem for users of GNU binutils once they upgrade to 2.36.
Omit the .L prefix on a label so that the assembler will emit an entry
into the symbol table for the label, with STB_LOCAL binding. This
enables objtool to generate proper unwind info here with LLVM_IAS=1 or
GNU binutils 2.36+.
[ bp: Massage commit message. ]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Suggested-by: Borislav Petkov <bp@alien8.de>
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20210112194625.4181814-1-ndesaulniers@google.com
Link: https://github.com/ClangBuiltLinux/linux/issues/1209
Link: https://reviews.llvm.org/D93783
Link: https://sourceware.org/binutils/docs/as/Symbol-Names.html
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d1bcae833b32f1408485ce69f844dcd7ded093a8 [1]
The DRC02 has no use for the on-SoM touchscreen controller, and the
on-SoM touchscreen controller may not even be populated, which then
results in error messages in kernel log. Disable the touchscreen
controller in DT.
Fixes: fde180f06d ("ARM: dts: stm32: Add DHSOM based DRC02 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
DG1 is missing those two WA so instead of copy and paste it to the DG1
function, here calling the function that implements it.
While at it also renaming tgl_init_clock_gating to
gen12lp_init_clock_gating as it is also used by DG1, RKL and ADL-S.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113133759.72055-1-jose.souza@intel.com
The ORC unwinder showed a warning [1] which revealed the stack layout
didn't match what was expected. The problem was that paravirt patching
had replaced "CALL *pv_ops.irq.save_fl" with "PUSHF;POP". That changed
the stack layout between the PUSHF and the POP, so unwinding from an
interrupt which occurred between those two instructions would fail.
Part of the agreed upon solution was to rework the custom paravirt
patching code to use alternatives instead, since objtool already knows
how to read alternatives (and converging runtime patching infrastructure
is always a good thing anyway). But the main problem still remains,
which is that runtime patching can change the stack layout.
Making stack layout changes in alternatives was disallowed with commit
7117f16bf4 ("objtool: Fix ORC vs alternatives"), but now that paravirt
is going to be doing it, it needs to be supported.
One way to do so would be to modify the ORC table when the code gets
patched. But ORC is simple -- a good thing! -- and it's best to leave
it alone.
Instead, support stack layout changes by "flattening" all possible stack
states (CFI) from parallel alternative code streams into a single set of
linear states. The only necessary limitation is that CFI conflicts are
disallowed at all possible instruction boundaries.
For example, this scenario is allowed:
Alt1 Alt2 Alt3
0x00 CALL *pv_ops.save_fl CALL xen_save_fl PUSHF
0x01 POP %RAX
0x02 NOP
...
0x05 NOP
...
0x07 <insn>
The unwind information for offset-0x00 is identical for all 3
alternatives. Similarly offset-0x05 and higher also are identical (and
the same as 0x00). However offset-0x01 has deviating CFI, but that is
only relevant for Alt3, neither of the other alternative instruction
streams will ever hit that offset.
This scenario is NOT allowed:
Alt1 Alt2
0x00 CALL *pv_ops.save_fl PUSHF
0x01 NOP6
...
0x07 NOP POP %RAX
The problem here is that offset-0x7, which is an instruction boundary in
both possible instruction patch streams, has two conflicting stack
layouts.
[ The above examples were stolen from Peter Zijlstra. ]
The new flattened CFI array is used both for the detection of conflicts
(like the second example above) and the generation of linear ORC
entries.
BTW, another benefit of these changes is that, thanks to some related
cleanups (new fake nops and alt_group struct) objtool can finally be rid
of fake jumps, which were a constant source of headaches.
[1] https://lkml.kernel.org/r/20201111170536.arx2zbn4ngvjoov7@treble
Cc: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Create a new struct associated with each group of alternatives
instructions. This will help with the removal of fake jumps, and more
importantly with adding support for stack layout changes in
alternatives.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Decouple ORC entries from instructions. This simplifies the
control/data flow, and is going to make it easier to support alternative
instructions which change the stack layout.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
The initial change breaking the logic is
commit 3d1f08b032 ("mtd: spinand: Use the external ECC engine logic")
It inadvertently dropped proper OOB support while doing something
else.
Shortly later, half of it got re-integrated by
commit 868cbe2a6d ("mtd: spinand: Fix OOB read")
(pointing by the way to a more early change which had nothing to do
with the issue). Problem is, this commit failed to revert the faulty
change entirely and missed the logic handling MTD_OPS_AUTO_OOB
requests.
Let's fix this mess by re-inserting the missing part now.
Fixes: 868cbe2a6d ("mtd: spinand: Fix OOB read")
Reported-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210107083813.24283-1-miquel.raynal@bootlin.com
Move the check for mtd->name after the mtd variable has actually been
initialized.
While here, also drop the NULL assignment to the mtd variable as it's
overwritten later on anyways and the NULL value is never read.
Fixes: 0b1039f016 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210106140943.98072-1-martin.blumenstingl@googlemail.com
I have been fooled by the logic picking the right ECC engine which is
spread across two functions: *init_module() and *_attach(). I thought
this driver was not impacted by the recent changes around the ECC
engines DT parsing logic but in fact it is.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: d7157ff49a ("mtd: rawnand: Use the ECC framework user input parsing bits")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210104093057.31178-1-miquel.raynal@bootlin.com
Remove the extraneous inlines. The only split by the compiler that
looked dubious was execlists_schedule_out, so push the code around
slightly to move all the work into the out-of-line function.
In a normal build, bloat-o-meter shows that only the
execlists_schedule_out is contentious:
add/remove: 1/0 grow/shrink: 0/2 up/down: 803/-1532 (-729)
Function old new delta
__execlists_schedule_out - 803 +803
execlists_submission_tasklet 6488 5766 -722
execlists_reset_csb.constprop 1587 777 -810
Total: Before=1605815, After=1605086, chg -0.05%
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210113151112.15212-1-chris@chris-wilson.co.uk
The DHCOM SoM uSD slot card detect signal is connected to GPIO PG1,
describe it in the DT.
Fixes: 34e0c7847d ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The uSD card detect signal on the DH DRC02 is active-high, with
a default pull down resistor on the board. Invert the polarity.
Fixes: fde180f06d ("ARM: dts: stm32: Add DHSOM based DRC02 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
--
Note that this could not be tested on prototype SoMs, now that it is
tested, this issue surfaced, so it needs to be fixed.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Two carveout reserved memory nodes each have been added for each of the
R5F remote processor devices within both the MCU and MAIN domains on the
TI J7200 EVM boards. These nodes are assigned to the respective rproc
device nodes as well. The first region will be used as the DMA pool for
the rproc device, and the second region will furnish the static carveout
regions for the firmware memory.
An additional reserved memory node is also added to reserve a portion of
the DDR memory to be used for performing inter-processor communication
between all the remote processors running RTOS. 8 MB of memory is reserved
for this purpose, and this accounts for all the vrings and vring buffers
between all the possible pairs of remote processors.
The current carveout addresses and sizes are defined statically for each
device. The R5F processors do not have an MMU, and as such require the
exact memory used by the firmwares to be set-aside. The firmware images
do not require any RSC_CARVEOUT entries in their resource tables either
to allocate the memory for firmware memory segments.
NOTE:
1. The R5F1 carveouts are needed only if the R5F cluster is running in
Split (non-LockStep) mode. The reserved memory nodes can be disabled
later on if there is no use-case defined to use the corresponding
remote processor.
2. The J7200 SoCs have no DSPs and one less R5F cluster compared to J721E
SoCs. So, while the carveout memories reserved for the R5F clusters
present on the SoC match to those on J721E, the overall memory map
reserved for firmwares is quite different.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210111184554.6748-4-s-anna@ti.com
Add the required 'mboxes' property to all the R5F processors for the
TI J7200 common processor board. The mailboxes and some shared memory
are required for running the Remote Processor Messaging (RPMsg) stack
between the host processor and each of the R5Fs. The nodes are therefore
added in the common k3-j7200-som-p0.dtsi file so that all of these can
be co-located.
The chosen sub-mailboxes match the values used in the current firmware
images. This can be changed, if needed, as per the system integration
needs after making appropriate changes on the firmware side as well.
Note that any R5F Core1 resources are needed and used only when that
R5F cluster is configured for Split-mode.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210111184554.6748-3-s-anna@ti.com
The J7200 SoCs have 2 dual-core Arm Cortex-R5F processor (R5FSS)
subsystems/clusters. One R5F cluster is present within the MCU
domain (MCU_R5FSS0), and the other one is present within the MAIN
domain (MAIN_R5FSS0). Each of these can be configured at boot time
to be either run in a LockStep mode or in an Asymmetric Multi
Processing (AMP) fashion in Split-mode. These subsystems have 64 KB
each Tightly-Coupled Memory (TCM) internal memories for each core
split between two banks - ATCM and BTCM (further interleaved into
two banks). The TCMs of both Cores are combined in LockStep-mode
to provide a larger 128 KB of memory, but otherwise are functionally
similar to those on J721E SoCs.
Add the DT nodes for both the MCU and MAIN domain R5F cluster/subsystems,
the two R5F cores are added as child nodes to each of the R5F cluster
nodes. The clusters are configured to run in LockStep mode by default,
with the ATCMs enabled to allow the R5 cores to execute code from DDR
with boot-strapping code from ATCM. The inter-processor communication
between the main A72 cores and these processors is achieved through
shared memory and Mailboxes.
The following firmware names are used by default for these cores, and
can be overridden in a board dts file if desired:
MCU R5FSS0 Core0: j7200-mcu-r5f0_0-fw (both in LockStep and Split modes)
MCU R5FSS0 Core1: j7200-mcu-r5f0_1-fw (needed only in Split mode)
MAIN R5FSS0 Core0: j7200-main-r5f0_0-fw (both in LockStep & Split modes)
MAIN R5FSS0 Core1: j7200-main-r5f0_1-fw (needed only in Split mode)
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Link: https://lore.kernel.org/r/20210111184554.6748-2-s-anna@ti.com
Commit 766c6b63aa ("spi: fix client driver breakages when using GPIO
descriptors") broke fsl spi driver.
As now we fully rely on gpiolib for handling the polarity of
chip selects, the driver shall not alter the GPIO value anymore
when SPI_CS_HIGH is not set in spi->mode.
Fixes: 766c6b63aa ("spi: fix client driver breakages when using GPIO descriptors")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/6b51cc2bfbca70d3e9b9da7b7aa4c7a9d793ca0e.1610629002.git.christophe.leroy@csgroup.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
A function has a different name between their prototype
and its kernel-doc markup:
../include/drm/drm_crtc.h:1257: warning: expecting prototype for drm_crtc_alloc_with_planes(). Prototype was for drmm_crtc_alloc_with_planes() instead
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/2439fb6713e9b2aa27a81f3269a4b0e8e7dfcd36.1610610937.git.mchehab+huawei@kernel.org
No one checks the return value of memblock_free_all().
Make the return value void.
memblock_free_all() is used on mem_init() for each
architecture, and the total count of freed pages will be added
to _totalram_pages variable by calling totalram_pages_add().
so do not need to return total count of freed pages.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
The new PMIC BD9574MWF inherits features from BD9571MWV.
Add the support of new PMIC to existing bd9571mwv driver.
Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@renesas.com>
Co-developed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Since the driver supports BD9571MWV PMIC only, this patch makes
the functions and data structure become more generic so that
it can support other PMIC variants as well. Also remove printing
part name which Lee Jones suggested.
Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@renesas.com>
Co-developed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Use devm_regmap_add_irq_chip() to simplify the code.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Use the SPDX license identifier instead of a local description.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add support for BD9574MWF which is similar chip with BD9571MWV.
Note that BD9574MWF has additional features "RECOV_GPOUT",
"FREQSEL" and "RTC_IN", but supports GPIO function only.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
To simplify this driver, use dev_get_regmap() and
rid of using struct bd9571mwv.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Use the SPDX license identifier instead of a local description.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add support for BD9574MWF which is similar chip with BD9571MWV.
Note that we don't support voltage rails VD{09,18,25,33} by this
driver on BD9574. The VD09 voltage could be read from PMIC but that
is not supported by this commit.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
To simplify this driver, use dev_get_regmap() and
rid of using struct bd9571mwv.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add chip IDs for BD9571MWV and BD9574MWF.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Document other similar specification chip BD9574MWF.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
To remove mfd devices when unload this driver, should use
devm_mfd_add_devices() instead.
Fixes: d3ea212720 ("mfd: Add ROHM BD9571MWV-M MFD PMIC driver")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The asd allocated with v4l2_async_notifier_add_fwnode_subdev() must be
of size cal_v4l2_async_subdev, otherwise access to
cal_v4l2_async_subdev->phy will go to unallocated memory.
Fixes: 8fcb7576ad ("media: ti-vpe: cal: Allow multiple contexts per subdev notifier")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix the following sparse warning:
drivers/media/platform/ti-vpe/cal-camerarx.c:783:32: warning: symbol 'cal_camerarx_media_ops' was not declared. Should it be static?
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
We can not make the assumption that the bound subdev is always a CSI
mux, in i.MX6UL/i.MX6ULL that is not the case. So, just get the entity
selected by source directly upstream from the CSI.
Fixes: 86e02d0787 ("media: imx5/6/7: csi: Mark a bound video mux as a CSI mux")
Reported-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit 86e02d0787 ("media: imx5/6/7: csi: Mark a bound video mux as
a CSI mux") made an incorrect assumption that for imx7-media-csi,
the bound subdev must always be a CSI mux. On i.MX6UL/i.MX6ULL there
is no CSI mux at all, so do not return an error when the entity is not a
video mux and assign the IMX_MEDIA_GRP_ID_CSI_MUX group id only when
appropriate.
This is the same approach as done in imx-media-csi.c and it fixes the
csi probe regression on i.MX6UL.
Tested on a imx6ull-evk board.
Fixes: 86e02d0787 ("media: imx5/6/7: csi: Mark a bound video mux as a CSI mux")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add support for base layer priority ID control in encoder.
This is a preparation patch to support v6.
[hverkuil: changed 54 to 51 in v4l2_ctrl_handler_init]
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>