"name below" is not part of the /proc path and should not be formatted
in monospace.
"doesn``t" is rendered in HTML with a double backtick. Revert it back to
"doesn't".
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20210101211447.1021412-1-j.neuschaefer@gmx.net
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
We removed ENABLE_MUST_CHECK in 1967939462 ("Compiler Attributes:
remove CONFIG_ENABLE_MUST_CHECK"), so let's remove docs' mentions.
At the same time, fix the outdated text related to
ENABLE_WARN_DEPRECATED that wasn't removed in 3337d5cfe5
("configs: get rid of obsolete CONFIG_ENABLE_WARN_DEPRECATED").
Finally, reflow the paragraph.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20210105055815.GA5173@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
In the next^W future patch, we remove the strict priority system and
continuously re-evaluate the relative priority of tasks. As such we need
to enable the timeslice whenever there is more than one context in the
pipeline. This simplifies the decision and removes some of the tweaks to
suppress timeslicing, allowing us to lift the timeslice enabling to a
common spot at the end of running the submission tasklet.
One consequence of the suppression is that it was reducing fairness
between virtual engines on an over saturated system; undermining the
principle for timeslicing.
v2: Commentary
v3: Commentary for the right cancel_timer()
v4: Add tracing for why we need a timeslice
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2802
Testcase: igt/gem_exec_balancer/fairslice
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210107132322.28373-1-chris@chris-wilson.co.uk
udp_tunnel_nic: post conversion cleanup
It has been two releases since we added the common infra for UDP
tunnel port offload, and we have not heard of any major issues.
Remove the old direct driver NDOs completely, and perform minor
simplifications in the tunnel drivers.
Link: https://lore.kernel.org/r/20210106210637.1839662-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the NETIF_F_RX_UDP_TUNNEL_PORT feature check into
udp_tunnel_nic_*_port() helpers, since they're always
done right before the call.
Add similar checks before calling the notifier.
udp_tunnel_nic invokes the notifier without checking
features which could result in some wasted cycles.
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All UDP tunnel port management is now routed via udp_tunnel_nic
infra directly. Remove the old callbacks.
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
udp_tunnel_nic handles REGISTER and UNREGISTER event, now that all
drivers use that infra we can drop the event handling in the tunnel
drivers.
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All drivers use udp_tunnel_nic_*_port() helpers, prepare for
NDO removal by invoking those helpers directly.
The helpers are safe to call on all devices, they check if
device has the UDP tunnel state initialized.
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All of the OF code that is used has stubbed and will compile and link
just fine, keeping COMPILE_TEST is enough.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210106191546.1358324-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 80b9414832 ("docs: octeontx2: Add Documentation for NPA health
reporters") added new documentation with improper formatting for rst, and
caused a few new warnings for make htmldocs in octeontx2.rst:169--202.
Tune markup and formatting for better presentation in the HTML view.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: George Cherian <george.cherian@marvell.com>
Link: https://lore.kernel.org/r/20210106161735.21751-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sieng Piaw Liew says:
====================
bcm63xx_enet: major makeover of driver
This patch series aim to improve the bcm63xx_enet driver by integrating the
latest networking features, i.e. batched rx processing, BQL, build_skb,
etc.
The newer enetsw SoCs are found to be able to do unaligned rx DMA by adding
NET_IP_ALIGN padding which, combined with these patches, improved packet
processing performance by ~50% on BCM6328.
Older non-enetsw SoCs still benefit mainly from rx batching. Performance
improvement of ~30% is observed on BCM6333.
The BCM63xx SoCs are designed for routers. As such, having BQL is
beneficial as well as trivial to add.
v3:
* Simplify xmit_more patch by not moving around the code needlessly.
* Fix indentation in xmit_more patch.
* Fix indentation in build_skb patch.
* Split rx ring cleanup patch from build_skb patch and precede build_skb
patch for better understanding, as suggested by Florian Fainelli.
v2:
* Add xmit_more support and rx loop improvisation patches.
* Moved BQL netdev_reset_queue() to bcm_enet_stop()/bcm_enetsw_stop()
functions as suggested by Florian Fainelli.
* Improved commit messages.
====================
Link: https://lore.kernel.org/r/20210106144208.1935-1-liew.s.piaw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use existing rx processed count to track against budget, thereby making
budget decrement operation redundant.
rx_desc_count can be calculated outside the rx loop, making the loop a
bit smaller.
Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We can increase the efficiency of rx path by using buffers to receive
packets then build SKBs around them just before passing into the network
stack. In contrast, preallocating SKBs too early reduces CPU cache
efficiency.
Check if we're in NAPI context when refilling RX. Normally we're almost
always running in NAPI context. Dispatch to napi_alloc_frag directly
instead of relying on netdev_alloc_frag which does the same but
with the overhead of local_bh_disable/enable.
Tested on BCM6328 320 MHz and iperf3 -M 512 to measure packet/sec
performance. Included netif_receive_skb_list and NET_IP_ALIGN
optimizations.
Before:
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-10.00 sec 49.9 MBytes 41.9 Mbits/sec 197 sender
[ 4] 0.00-10.00 sec 49.3 MBytes 41.3 Mbits/sec receiver
After:
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-30.00 sec 171 MBytes 47.8 Mbits/sec 272 sender
[ 4] 0.00-30.00 sec 170 MBytes 47.6 Mbits/sec receiver
Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rx SKB ring use the same code for cleanup at various points.
Combine them into a function to reduce lines of code.
Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In ocrdma_dealloc_ucontext_pd() uctx->cntxt_pd is assigned to the variable
pd and then after uctx->cntxt_pd is freed, the variable pd is passed to
function _ocrdma_dealloc_pd() which dereferences pd directly or through
its call to ocrdma_mbx_dealloc_pd().
Reorder the free using the variable pd.
Cc: stable@vger.kernel.org
Fixes: 21a428a019 ("RDMA: Handle PD allocations by IB/core")
Link: https://lore.kernel.org/r/20201230024653.1516495-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When mlx5_create_flow_group() fails, ft->g should be
freed just like when kvzalloc() fails. The caller of
mlx5e_create_l2_table_groups() does not catch this
issue on failure, which leads to memleak.
Fixes: 33cfaaa8f3 ("net/mlx5e: Split the main flow steering table")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
mlx5e_create_ttc_table_groups() frees ft->g on failure of
kvzalloc(), but such failure will be caught by its caller
in mlx5e_create_ttc_table() and ft->g will be freed again
in mlx5e_destroy_flow_table(). The same issue also occurs
in mlx5e_create_ttc_table_groups(). Set ft->g to NULL after
kfree() to avoid double free.
Fixes: 7b3722fa9e ("net/mlx5e: Support RSS for GRE tunneled packets")
Fixes: 33cfaaa8f3 ("net/mlx5e: Split the main flow steering table")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Prior to this patch, configuring speed to 50G with autoneg off over
devices supporting 50G per lane failed.
Support for 50G per lane introduced a new set of link-modes, on which
driver always performed a speed validation as if only legacy link-modes
were configured. Fix driver speed validation to force setting autoneg
over 56G only if in legacy link-mode.
Fixes: 3d7cadae51 ("net/mlx5e: ethtool, Fix analysis of speed setting")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
sop_drop_qpn field in the cqe is used by two features, in SWITCHDEV mode
to restore the chain id in case of a miss and in LEGACY mode to support
skbedit mark action. In build RX skb, the skb mark field is set regardless
of the configured mode which cause a corruption of the mark field in case
of switchdev mode.
Fix by overriding the mark value back to 0 in the representor tc update
skb flow.
Fixes: 8f1e0b97cc ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping")
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Adding vf VLANID for the first time, or after having cleared previously
defined VLANID works fine, however, attempting to change an existing vf
VLANID clears the rules on the firmware, but does not add new rules for
the new vf VLANID.
Fix this by changing the logic in function esw_acl_egress_lgcy_setup()
so that it will always configure egress rules.
Fixes: ea651a86d4 ("net/mlx5: E-Switch, Refactor eswitch egress acl codes")
Signed-off-by: Alaa Hleihel <alaa@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In case WQE includes inline header the vlan is inserted by driver even
if vlan offload is set. On geneve over vlan interface where software
parser is used the SWP offsets should be updated according to the added
vlan.
Fixes: e3cfc7e6b7 ("net/mlx5e: TX, Add geneve tunnel stateless offload support")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Connection counters may be shared for both directions when the counter
is used for connection aging purposes. However, if TC flow
accounting is enabled then a unique counter is required per direction.
Instantiate a unique counter per direction if the conntrack accounting
extension is enabled. Use a shared counter when the connection accounting
extension is disabled.
Fixes: 1edae2335a ("net/mlx5e: CT: Use the same counter for both directions")
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In multi-port mode, FW reports syndrome 0x2ea48 (invalid vhca_port_number)
if the port_num is not 1 or 2.
Fixes: 80f09dfc23 ("net/mlx5: Eswitch, enable RoCE loopback traffic")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Expose firmware indication that it supports setting eswitch uplink state
to follow (follow the physical link). Condition setting the eswitch
uplink admin-state with this capability bit. Older FW may not support
the uplink state setting.
Fixes: 7d0314b11c ("net/mlx5e: Modify uplink state on interface up/down")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
A couple of core fixes here, both to do with handling of drivers which
don't report their maximum speed since we factored some of the handling
for transfer speeds out into the core in the previous release. There's
also some driver specific fixes, including a relatively large set for
some races around timeouts in spi-geni-qcom.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl/3NqwACgkQJNaLcl1U
h9C04gf8DHM+rGA6XsQfxjlqPmu0KOq+QVfDEYvXEbpWIQ1YWyB3kK3H6ftvFMJz
bWW1xBjJL6nav9pZwRllLu2P1hkXek0MpZFFRp00MrUbUW06ct103xiIGVmVPUMQ
A4w44nt7WJj/k9fRyvAjrAp1LQ8pGl0H1m6kifZLpNm8GlUMrCyFz7kfWs6ojHOo
uBfru37WFiSfgQeDVTBd9v0A7Nu/dEnMlHCbikifpwsB/Q0GTfs8GG4pIo+QehwQ
VhOCi/x+p7JW3Tksp4DM6jawzpBCoTRt5EzNzbprIyPde3vzUj4rjiqkcAxgW3hu
oiwkkjM5e3/0oVHebSkmRVuG2qlT8w==
=hP9t
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of core fixes here, both to do with handling of drivers which
don't report their maximum speed since we factored some of the
handling for transfer speeds out into the core in the previous
release.
There's also some driver specific fixes, including a relatively large
set for some races around timeouts in spi-geni-qcom"
* tag 'spi-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fix the divide by 0 error when calculating xfer waiting time
spi: Fix the clamping of spi->max_speed_hz
spi: altera: fix return value for altera_spi_txrx()
spi: stm32: FIFO threshold level - fix align packet size
spi: spi-geni-qcom: Print an error when we timeout setting the CS
spi: spi-geni-qcom: Don't try to set CS if an xfer is pending
spi: spi-geni-qcom: Fail new xfers if xfer/cancel/abort pending
spi: spi-geni-qcom: Fix geni_spi_isr() NULL dereference in timeout case
A few minor driver specific fixes, mostly DT bindings document bits,
plus a new device ID.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl/3Pe0ACgkQJNaLcl1U
h9Cigwf/QVwn08GK8+fsRCRWT/VffFeK2u9QlgUvqRLy8gFoU/GE2GczbU7yOBmy
ELYHxuXBBGXU2tX5o0xE280KzPsRN5IFHRpj5HOGvdtpzaL4ch2xomVttzXoPaCQ
i16YcTD5AR+yzYhnY/SWExgVpNx5qbYdYEuYBHf0v1jTF/L+eH5YKYBJibgzMooy
tfSNFM8Ie6d1b8UUbMETdaA7UHd0QIqphJj11DFsNJ4wfH+CqjMqI11hTImADTJK
tng15k+I9R3kE57I79Cdzpcd2/yl4eyTNbRbqx7non1nMQMx0tsN/wQk5mD2JVXM
uYY6Xb2enz2lloNCcGiQLFmgRvXWBw==
=sZgX
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A few minor driver specific fixes, mostly DT bindings document bits,
plus a new device ID"
* tag 'regulator-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: qcom-rpmh: add QCOM_COMMAND_DB dependency
regulator: qcom-rpmh-regulator: correct hfsmps515 definition
dt-bindings: regulator: qcom,rpmh-regulator: add pm8009 revision
regulator: bd718x7: Add enable times
regulator: pf8x00: Use specific compatible strings for devices
If usnic_ib_qp_grp_create() fails at the first call, dev_list
will not be freed on error, which leads to memleak.
Fixes: e3cf00d0a8 ("IB/usnic: Add Cisco VIC low-level hardware driver")
Link: https://lore.kernel.org/r/20201226074248.2893-1-dinghao.liu@zju.edu.cn
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This is just a maintenance patch to update font_ter16x32.c with changes
and minor fixes added in new upstream Terminus v4.49.
>From release notes of new version 4.49, this brings:
- Altered ascii grave in some sizes to be more useful as a back quote.
- Fixed 21B5, added 21B2 and 21B3.
Just as my initial submission of the font, above changes were obtained from
new ter-i32b.psf font source.
Terminus font sources are available for download at SourceForge:
https://sourceforge.net/projects/terminus-font/files/terminus-font-4.49/
Simply running `make` in source directory will build the .psf font files.
Signed-off-by: Amanoel Dawod <kernel@amanoeldawod.com>
Link: https://lore.kernel.org/r/20201226235840.26290-1-kernel@amanoeldawod.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When measuring the throughput (iperf3 + TCP) while routing on a
not-so-powerful device (Mediatek MT7621, 880MHz CPU), I noticed that I
achieved significantly lower speeds with QMI-based modems than for
example a USB LAN dongle. The CPU was saturated in all of my tests.
With the dongle I got ~300 Mbit/s, while I only measured ~200 Mbit/s
with the modems. All offloads, etc. were switched off for the dongle,
and I configured the modems to use QMAP (16k aggregation). The tests
with the dongle were performed in my local (gigabit) network, while the
LTE network the modems were connected to delivers 700-800 Mbit/s.
Profiling the kernel revealed the cause of the performance difference.
In qmimux_rx_fixup(), an SKB is allocated for each packet contained in
the URB. This SKB has too little headroom, causing the check in
skb_cow() (called from ip_forward()) to fail. pskb_expand_head() is then
called and the SKB is reallocated. In the output from perf, I see that a
significant amount of time is spent in pskb_expand_head() + support
functions.
In order to ensure that the SKB has enough headroom, this commit
increases the amount of memory allocated in qmimux_rx_fixup() by
LL_MAX_HEADER. The reason for using LL_MAX_HEADER and not a more
accurate value, is that we do not know the type of the outgoing network
interface. After making this change, I achieve the same throughput with
the modems as with the dongle.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20210106122403.1321180-1-kristian.evensen@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cyclic dependencies in some firmware was one of the last remaining
reasons fw_devlink=on couldn't be set by default. Now that cyclic
dependencies don't block probing, set fw_devlink=on by default.
Setting fw_devlink=on by default brings a bunch of benefits (currently,
only for systems with device tree firmware):
* Significantly cuts down deferred probes.
* Device probe is effectively attempted in graph order.
* Makes it much easier to load drivers as modules without having to
worry about functional dependencies between modules (depmod is still
needed for symbol dependencies).
If this patch prevents some devices from probing, it's very likely due
to the system having one or more device drivers that "probe"/set up a
device (DT node with compatible property) without creating a struct
device for it. If we hit such cases, the device drivers need to be
fixed so that they populate struct devices and probe them like normal
device drivers so that the driver core is aware of the devices and their
status. See [1] for an example of such a case.
[1] - https://lore.kernel.org/lkml/CAGETcx9PiX==mLxB9PO8Myyk6u2vhPVwTMsA5NkD-ywH5xhusw@mail.gmail.com/
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201218031703.3053753-6-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sometimes, firmware can have cyclic dependencies between devices. But
one or more of those dependencies in the cycle are false dependencies
that don't affect the probing of the device.
fw_devlink can detect some of these false dependencies using logic. But
when it can't, we don't want to block probing of the devices in this
cyclic dependency.
So, instead of using normal device links for the devices in this cycle,
we need to switch to SYNC_STATE_ONLY device links between these devices.
This is so that sync_state() callback correctness is still maintained
while we allow these device to probe.
This is functionally similar to switching to fw_devlink=permissive just
for the devices in the cycle.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201218031703.3053753-5-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds new 2 new tests to the PTMU script: pmtu_ipv4/6_route_change.
These tests explicitly test for a recently discovered problem in the
IPv6 routing framework where PMTU exceptions were not properly released
when replacing a route via "ip route change ...".
After creating PMTU exceptions, the route from the device A to R1 will be
replaced with a new route, then device A will be deleted. If the PMTU
exceptions were properly cleaned up by the kernel, this device deletion
will succeed. Otherwise, the unregistration of the device will stall, and
messages such as the following will be logged in dmesg:
unregister_netdevice: waiting for veth_A-R1 to become free. Usage count = 4
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/1609892546-11389-2-git-send-email-stranche@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Route removal is handled by two code paths. The main removal path is via
fib6_del_route() which will handle purging any PMTU exceptions from the
cache, removing all per-cpu copies of the DST entry used by the route, and
releasing the fib6_info struct.
The second removal location is during fib6_add_rt2node() during a route
replacement operation. This path also calls fib6_purge_rt() to handle
cleaning up the per-cpu copies of the DST entries and releasing the
fib6_info associated with the older route, but it does not flush any PMTU
exceptions that the older route had. Since the older route is removed from
the tree during the replacement, we lose any way of accessing it again.
As these lingering DSTs and the fib6_info struct are holding references to
the underlying netdevice struct as well, unregistering that device from the
kernel can never complete.
Fixes: 2b760fcf5c ("ipv6: hook up exception table to store dst cache")
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/1609892546-11389-1-git-send-email-stranche@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This will be useful in identifying device links created only due to
fw_devlink when we need to break cyclic dependencies due to fw_devlink.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201218031703.3053753-4-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The parameter of kfree function is NULL, so kfree code is useless, delete
it. Therefore, goto expression is no longer needed, so simplify
it. cma_dev_group is always pre-zero'd before reaching make_cma_ports, so
the NULL set to cma_dev_group->ports is unneeded too.
Link: https://lore.kernel.org/r/20201216080219.18184-1-zhengyongjun3@huawei.com
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
See Documentation/core-api/printk-formats.rst. h should no longer be used
in the format specifier for printk.
Link: https://lore.kernel.org/r/20201215183509.2072517-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This change fixes the checkpatch warning described in
commit cbacb5ab0a ("docs: printk-formats: Stop encouraging use of
unnecessary %h[xudi] and %hh[xudi]")
Standard integer promotion is already done and %hx and %hhx is useless so
do not encourage the use of %hh[xudi] or %h[xudi].
Link: https://lore.kernel.org/r/20201223193041.122850-1-trix@redhat.com
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Hi,
This patch makes the LPM pin as optional as this may be controlled
in the last phase of suspend procedure to decrease the power consumption
while suspended. Along w/ this update the MAINTAINERS entry for this
driver.
Thank you,
Claudiu Beznea
Claudiu Beznea (3):
dt-bindings: regulator: mcp16502: document lpm as optional
regulator: mcp16502: lpm pin can be optional on some platforms
MAINTAINERS: add myself as maintainer for mcp16502
Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt | 3 ++-
MAINTAINERS | 4 ++--
drivers/regulator/mcp16502.c | 2 +-
3 files changed, 5 insertions(+), 4 deletions(-)
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.orghttp://lists.infradead.org/mailman/listinfo/linux-arm-kernel
A couple of small fixes for leaks when attaching a device to a
preexisting regmap.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl/3OOIACgkQJNaLcl1U
h9BHLwf/Q5iRceYjgTZT3EbDqtkf4eX60dwoaoCdSBOtzdzgX1kYdFI2xTeqjMTh
sXKTA/OfapyWQrPIWW4vx5jkrum9Wz7hoQJhxp6jLl/lSj2c1TR3U7Nx+b2OA4Ap
mPrdlfxHF47jZtsjfPtVUwNyb456ZL94H0IX/kefIUVp8uQusDFBoYLefi+T3+PA
cRKlJqpcPpq2amZnXYCRhi8FpFPhFZezfAiddBzpab3xE+RFihgWl9NV2kuk99nR
9SD5ZhoDQF5IQnRXhfHGp2vhXFTk+BgpDuj+TFsF9TkWNgH8gtEQwmskvf7MJFvd
Bihwcb8I7Me3ZPE7NI+8YqJEHLXnJg==
=2RSs
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"A couple of small fixes for leaks when attaching a device to a
preexisting regmap"
* tag 'regmap-fix-v5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: debugfs: Fix a reversed if statement in regmap_debugfs_init()
regmap: debugfs: Fix a memory leak when calling regmap_attach_dev