On some platform (e.g. SAMA7G5) LPM pin should be optional as it can
be controlled explicitly (via shutdown controller registers) in the
platform specific power saving code to decrease the power consumption
while suspended as this SoC pin may be connected to other devices that
could take power saving actions based on its value.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1610028927-9842-3-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
unistd_nr_{n32,n64,o32}.h are needed only by include/asm/unistd.h,
which is a kernel-side header file, and their contents is generally
not for userland use.
Move their target destination from include/generated/uapi/asm/ to
include/generated/asm/ to disable exporting them as UAPI headers.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When building xway_defconfig with clang:
arch/mips/lantiq/irq.c:305:48: error: use of logical '&&' with constant
operand [-Werror,-Wconstant-logical-operand]
if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT)
^ ~~~~~~~~~~~~~~~~~
arch/mips/lantiq/irq.c:305:48: note: use '&' for a bitwise operation
if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT)
^~
&
arch/mips/lantiq/irq.c:305:48: note: remove constant to silence this
warning
if ((irq == LTQ_ICU_EBU_IRQ) && (module == 0) && LTQ_EBU_PCC_ISTAT)
~^~~~~~~~~~~~~~~~~~~~
1 error generated.
Explicitly compare the constant LTQ_EBU_PCC_ISTAT against 0 to fix the
warning. Additionally, remove the unnecessary parentheses as this is a
simple conditional statement and shorthand '== 0' to '!'.
Fixes: 3645da0276 ("OF: MIPS: lantiq: implement irq_domain support")
Link: https://github.com/ClangBuiltLinux/linux/issues/807
Reported-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
FE is connected to two BEs, BE1 is active, BE2 is deactive.
When closing BE1, FE/BE1 is in HW_FREE state, then BE2 is
startup by mixer runtime update.
For FE is in HW_FREE state, dpcm_run_update_startup() will skip
BE2's startup because FE's state is HW_FREE, BE2 stays in FE's
be_clients list.
During FE's closed, the dpcm_fe_dai_close() will close all related
BEs, BE2 will be closed. This will lead to BE2's dpcm[stream].users
mismatch.
We need disconnet all pending BEs in the corner case.
Signed-off-by: zhucancan <zhucancan@vivo.com>
Link: https://lore.kernel.org/r/AAoArwDfDnoefyxzy2wyiaqm.1.1608885766936.Hmail.zhucancan@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove a stale comment about SSP0 being untested, the
bytcht_es8316 has supported SSP0 for a while now and this has
been successfully tested on a GP electrinic T701 tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210107120757.12051-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit fixes the following checkpatch warnings:
WARNING: externs should be avoided in .c files
This is a warning for placing declarations in a ".c" file.
This fix removes the declaration in ".c" and adds it to
the common header file.
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 2ee1503e54 ("MIPS: zboot: head.S clean up").
After .noreorder removed, clear BSS fall into endless loop. The bne
instruction will add nop to the delay slot at compile time. So a0
register will not increment by 4. Fix it and clear BSS from _edata
to (_end - 1).
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Most of the prom_free_prom_memory functions are empty. With
a new weak prom_free_prom_memory() we can remove all of them.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
When building with clang, the following section mismatch warning occurs:
WARNING: modpost: vmlinux.o(.text+0x24490): Section mismatch in
reference from the function r4k_cache_init() to the function
.init.text:loongson2_sc_init()
This should have been fixed with commit ad4fddef5f ("mips: fix Section
mismatch in reference") but it was missed. Remove the improper __init
annotation like that commit did.
Fixes: 078a55fc82 ("MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code")
Link: https://github.com/ClangBuiltLinux/linux/issues/787
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When building xway_defconfig with clang:
arch/mips/lantiq/prom.c:82:23: error: array comparison always evaluates
to true [-Werror,-Wtautological-compare]
else if (__dtb_start != __dtb_end)
^
1 error generated.
These are not true arrays, they are linker defined symbols, which are
just addresses. Using the address of operator silences the warning
and does not change the resulting assembly with either clang/ld.lld
or gcc/ld (tested with diff + objdump -Dr). Do the same thing across
the entire MIPS subsystem to ensure there are no more warnings around
this type of comparison.
Link: https://github.com/ClangBuiltLinux/linux/issues/1232
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
visorhba uses kthread to obtain the responses from the IO
Service Partition periodically, on the other hand, visorbus
provides periodic work to serve such request, therefore,
kthread should be replaced by channel_interrupt.
Signed-off-by: Song Chen <chensong_2000@189.cn>
Link: https://lore.kernel.org/r/1609923863-6650-1-git-send-email-chensong_2000@189.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smatch found a local variable that can get copied to another
local variable without an initializion in the error case:
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:1056 vchiq_get_user_ptr() error: uninitialized symbol 'ptr'.
This seems harmless, as the function should normally get inlined, with
the output directly written or not. In any case, the uninitialized data
is never used after get_user() fails.
As Dan mentions, it could still trigger an UBSAN runtime error, and it
is of course a bad idea to copy uninitialized variables, so just
bail out early.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210105135256.1810337-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Record in the TODO file that the address of "&waiter->bulk_waiter"
should never be returned to userspace.
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/20210105162030.1415213-4-phil@raspberrypi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The recent change to the bulk transfer compat function missed the fact
the relevant ioctl command is VCHIQ_IOC_QUEUE_BULK_TRANSMIT32, not
VCHIQ_IOC_QUEUE_BULK_TRANSMIT, as any attempt to send a bulk block
to the VPU would have shown.
Fixes: a4367cd2b2 ("staging: vchiq: convert compat bulk transfer")
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/20210105162030.1415213-3-phil@raspberrypi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The addition of the local 'userdata' pointer to
vchiq_irq_queue_bulk_tx_rx omitted the case where neither BLOCKING nor
WAITING modes are used, in which case the value provided by the
caller is not returned to them as expected, but instead it is replaced
with a NULL. This lack of a suitable context may cause the application
to crash or otherwise malfunction.
Fixes: 4184da4f31 ("staging: vchiq: fix __user annotations")
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/20210105162030.1415213-2-phil@raspberrypi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
n_tty_flush_buffer can happen in parallel with n_tty_close that the
tty->disc_data will be set to NULL. n_tty_flush_buffer accesses
tty->disc_data, so we must prevent n_tty_close clear tty->disc_data
while n_tty_flush_buffer has a non-NULL view of tty->disc_data.
So we need to make sure that accesses to disc_data are atomic using
tty->termios_rwsem.
There is an example I meet:
When n_tty_flush_buffer accesses tty struct, the disc_data is right.
However, then reset_buffer_flags accesses tty->disc_data, disc_data
become NULL, So kernel crash when accesses tty->disc_data->real_tail.
I guess there could be another thread change tty->disc_data to NULL,
and during N_TTY line discipline, n_tty_close will set tty->disc_data
to be NULL. So use tty->termios_rwsem to protect disc_data between close
and flush_buffer.
IP: reset_buffer_flags+0x9/0xf0
PGD 0 P4D 0
Oops: 0002 [#1] SMP
CPU: 23 PID: 2087626 Comm: (agetty) Kdump: loaded Tainted: G
Hardware name: UNISINSIGHT X3036P-G3/ST01M2C7S, BIOS 2.00.13 01/11/2019
task: ffff9c4e9da71e80 task.stack: ffffb30cfe898000
RIP: 0010:reset_buffer_flags+0x9/0xf0
RSP: 0018:ffffb30cfe89bca8 EFLAGS: 00010246
RAX: ffff9c4e9da71e80 RBX: ffff9c368d1bac00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9c4ea17b50f0 RDI: 0000000000000000
RBP: ffffb30cfe89bcc8 R08: 0000000000000100 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000000 R12: ffff9c368d1bacc0
R13: ffff9c20cfd18428 R14: ffff9c4ea17b50f0 R15: ffff9c368d1bac00
FS: 00007f9fbbe97940(0000) GS:ffff9c375c740000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000002260 CR3: 0000002f72233003 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
? n_tty_flush_buffer+0x2a/0x60
tty_buffer_flush+0x76/0x90
tty_ldisc_flush+0x22/0x40
vt_ioctl+0x5a7/0x10b0
? n_tty_ioctl_helper+0x27/0x110
tty_ioctl+0xef/0x8c0
do_vfs_ioctl+0xa7/0x5e0
? __audit_syscall_entry+0xaf/0x100
? syscall_trace_enter+0x1d0/0x2b0
SyS_ioctl+0x79/0x90
do_syscall_64+0x6c/0x1b0
entry_SYSCALL64_slow_path+0x25/0x25
n_tty_flush_buffer --->tty->disc_data is OK
->reset_buffer_flags -->tty->disc_data is NULL
Signed-off-by: Yan.Gao <gao.yanB@h3c.com>
Reviewed-by: Xianting Tian <tian.xianting@h3c.com>
Link: https://lore.kernel.org/r/20201210022507.30729-1-gao.yanB@h3c.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the tty_vhangup() from the pty code and just release the
redirect. The tty_vhangup() results in data loss and data out of order
issues.
If you write to a pty master an immediately close the pty master, the
receiver might get a chunk of data dropped, but then receive some later
data. That's obviously something rather unexpected for a user. It
certainly confused my test program.
It turns out that tty_vhangup() on the slave pty gets called from
pty_close(), and that causes the data on the slave side to be flushed,
but due to races more data can be copied into the slave side's buffer
after that. Consider the following sequence:
thread1 thread2 thread3
------- ------- -------
| |-write data into buffer,
| | n_tty buffer is filled
| | along with other buffers
| |-pty_close(master)
| |--tty_vhangup(slave)
| |---tty_ldisc_hangup()
| |----n_tty_flush_buffer()
| |-----reset_buffer_flags()
|-n_tty_read() |
|--up_read(&tty->termios_rwsem);
| |------down_read(&tty->termios_rwsem)
| |------clear n_tty buffer contents
| |------up_read(&tty->termios_rwsem)
|--tty_buffer_flush_work() |
|--schedules work calling |
| flush_to_ldisc() |
| |-flush_to_ldisc()
| |--receive_buf()
| |---tty_port_default_receive_buf()
| |----tty_ldisc_receive_buf()
| |-----n_tty_receive_buf2()
| |------n_tty_receive_buf_common()
| |-------down_read(&tty->termios_rwsem)
| |-------__receive_buf()
| | copies data into n_tty buffer
| |-------up_read(&tty->termios_rwsem)
|--down_read(&tty->termios_rwsem)
|--copy buffer data to user
>From this sequence, you can see that thread2 writes to the buffer then
only clears the part of the buffer in n_tty. The n_tty receive buffer
code then copies more data into the n_tty buffer.
But part of the vhangup, releasing the redirect, is still required to
avoid issues with consoles running on pty slaves. So do that.
As far as I can tell, that is all that should be required.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20201124004902.1398477-3-minyard@acm.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This will be required by the pty code when it removes tty_vhangup() on
master close.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20201124004902.1398477-2-minyard@acm.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The transmission complete error message provides the status of the
ISR_USART_TC bit. This bit, when set, indicates that the transmission
has not been completed.
The bit status indication is not a very understandable information.
The error message sent on console should indicate that the transmission is
not complete, instead of providing USART_TC bit status.
Update the error message and add a comment for better understanding.
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210106162203.28854-9-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean probe and remove port deinit by moving clk_disable_unprepare in a
new dedicated deinit_port function.
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Link: https://lore.kernel.org/r/20210106162203.28854-8-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comment for conflicting RTS/CTS config refers to "st, hw-flow-ctrl",
but this property is deprecated since the generic RTS/CTS property has
been introduced by the patch 'serial: stm32: Use generic DT binding for
announcing RTS/CTS lines'.
Update the comment to refer to both generic and deprecated RTS/CTS
properties.
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210106162203.28854-7-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update rts-gpios and cts-gpios:
- remove max-items as already defined in serial.yaml
- add a note describing rts-gpios and cts-gpios usage with stm32
Document the use of cts-gpios and rts-gpios for flow control in STM32 UART
controller. These properties can be used instead of 'uart-has-rtscts' or
'st,hw-flow-ctrl' (deprecated) for making use of any gpio pins for flow
control instead of dedicated pins.
It should be noted that both cts-gpios/rts-gpios and 'uart-has-rtscts' or
'st,hw-flow-ctrl' (deprecated) properties cannot co-exist in a design.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210106162203.28854-6-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds the prefix "_usart" in the name of stm32 usart functions in order to
ease the usage of kernel trace and tools, such as f-trace.
Allows to trace "stm32_usart_*" functions with f-trace. Without this patch,
all the driver functions needs to be added manually in f-trace filter.
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20210106162203.28854-4-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes checkpatch --strict warnings and checks:
- checkpatch --strict "Unnecessary parentheses"
- checkpatch --strict "Blank lines aren't necessary before a close brace
- checkpatch --strict "Alignment should match open parenthesis"
- checkpatch --strict "Please don't use multiple blank lines"
- checkpatch --strict "Comparison to NULL could be written ..."
- visual check code ordering warning
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210106162203.28854-3-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DMA initialization error handling is not properly implemented in the
driver.
Fix DMA initialization error handling by:
- moving TX DMA descriptor request error handling in a new dedicated
fallback_err label
- adding error handling to TX DMA descriptor submission
- adding error handling to RX DMA descriptor submission
This patch depends on '24832ca3ee ("tty: serial: stm32-usart: Remove set
but unused 'cookie' variables")' which unfortunately doesn't include a
"Fixes" tag.
Fixes: 3489187204 ("serial: stm32: adding dma support")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210106162203.28854-2-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The main purpose of tty_port::low_latency was removed in commit
a9c3f68f3c (tty: Fix low_latency BUG) back in 2014. It was left in
place for drivers as an optional tune knob. But only one driver has been
using it until the previous commit. So remove this misconcept
completely, given there are no users.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-11-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the only in-kernel user of tty_port::low_latency. Switch this
last one to test uport->flags directly as tty_port::low_latency is going
away in the next patch.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-10-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
BROKEN_GRAPHICS_PROGRAMS is defined when CONFIG_VGA_CONSOLE=y. And
vgacon.c is built exclusively in that case too. So the check for
BROKEN_GRAPHICS_PROGRAMS is pointless in vgacon.c as it is always true.
So remove the test and BROKEN_GRAPHICS_PROGRAMS completely.
This also eliminates the need for vga_font_is_default global as it is
only set and never read.
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-9-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Drop support for these ioctls:
* PIO_FONT, PIO_FONTX
* GIO_FONT, GIO_FONTX
* PIO_FONTRESET
As was demonstrated by commit 90bfdeef83 (tty: make FONTX ioctl use
the tty pointer they were actually passed), these ioctls are not used
from userspace, as:
1) they used to be broken (set up font on current console, not the open
one) and racy (before the commit above)
2) KDFONTOP ioctl is used for years instead
Note that PIO_FONTRESET is defunct on most systems as VGA_CONSOLE is set
on them for ages. That turns on BROKEN_GRAPHICS_PROGRAMS which makes
PIO_FONTRESET just return an error.
We are removing KD_FONT_FLAG_OLD here as it was used only by these
removed ioctls. kd.h header exists both in kernel and uapi headers, so
we can remove the kernel one completely. Everyone includeing kd.h will
now automatically get the uapi one.
There are now unused definitions of the ioctl numbers and "struct
consolefontdesc" in kd.h, but as it is a uapi header, I am not touching
these.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-8-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The constant 20 makes the font sum computation signed which can lead to
sign extensions and signed wraps. It's not much of a problem as we build
with -fno-strict-overflow. But if we ever decide not to, be ready, so
switch the constant to unsigned.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-7-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty->ops->close is always called with a valid tty, so the BUG_ON cannot
trigger.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-5-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 5ce2087ed0 (Fix default compose table initialization) fixed
unicode table so that the values are not sign extended. The upstream
(kbd package) chose a different approach. They use hexadecimal values.
So use the same, so that the output of loadkeys and our shipped file
correspond more to each other.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
loadkeys (from kbd) generates 'unsigned short' instead of 'u_short'
since 2.0.3. It also marks maps as 'static' for longer than kbd's
history.
So adapt the shipped defkeymap.c to conform more to loadkeys output.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the last extern user of the tasklet (set_leds) is in
keyboard.c, we can make keyboard_tasklet local to this unit too.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
set_leds and compute_shiftstate are called from a single place in vt.c.
Let's combine these two into vt_set_leds_compute_shiftstate. This allows
for making keyboard_tasklet local in the next patch.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
waitqueue_active() needs smp_mb() to be in sync with waitqueues
modification, but we miss it in io_cqring_ev_posted*() apart from
cq_wait() case.
Take an smb_mb() out of wq_has_sleeper() making it waitqueue_active(),
and place it a few lines before, so it can synchronise other
waitqueue_active() as well.
The patch doesn't add any additional overhead, so even if there are
no problems currently, it's just safer to have it this way.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
CPU0 CPU1
---- ----
lock(&new->fa_lock);
local_irq_disable();
lock(&ctx->completion_lock);
lock(&new->fa_lock);
<Interrupt>
lock(&ctx->completion_lock);
*** DEADLOCK ***
Move kill_fasync() out of io_commit_cqring() to io_cqring_ev_posted(),
so it doesn't hold completion_lock while doing it. That saves from the
reported deadlock, and it's just nice to shorten the locking time and
untangle nested locks (compl_lock -> wq_head::lock).
Reported-by: syzbot+91ca3f25bd7f795f019c@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make sure io_iopoll_complete() tries to wake up eventfd, which currently
is skipped together with io_cqring_ev_posted() for non-SQPOLL IOPOLL.
Add an iopoll version of io_cqring_ev_posted(), duplicates a bit of
code, but they actually use different sets of wait queues may be for
better.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rename v4l2_get_link_rate() as v4l2_get_link_freq(). What the function
returns is the frequency of the link; rename it to reflect the name of the
control where the information is obtained.
Fixes: 1b888b3ceb ("media: v4l: Add a helper for obtaining the link frequency")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently the return error code is in ret is being assigned but not
used. It and should be returned by the return statement and currently
just 0 is being returned. Fix this.
Addresses-Coverity: ("Unused value")
Fixes: b9ad52aafe ("media: rcar-vin: Rework parallel firmware parsing")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Fix obtaining CCS static data version minor part correctly. Instead, the
upper 8 bits were obtained from the major version number.
Fixes: a6b396f410 ("media: ccs: Add CCS static data parser library")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The highest fundamental frequency signal for C-PHY is half of the symbol
rate which is similar to D-PHY. Take this into account in ccs-pll.
Also remove the outdated comment.
Fixes: 8030aa4f9c ("media: ccs-pll: Add C-PHY support")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
iommu_flush_dev_iotlb() is called to invalidate caches on a device but
only loops over the devices which are fully-attached to the domain. For
sub-devices, this is ineffective and can result in invalid caching
entries left on the device.
Fix the missing invalidation by adding a loop over the subdevices and
ensuring that 'domain->has_iotlb_device' is updated when attaching to
subdevices.
Fixes: 67b8e02b5e ("iommu/vt-d: Aux-domain specific domain attach/detach")
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1609949037-25291-4-git-send-email-yi.l.liu@intel.com
Signed-off-by: Will Deacon <will@kernel.org>
'struct intel_svm' is shared by all devices bound to a give process,
but records only a single pointer to a 'struct intel_iommu'. Consequently,
cache invalidations may only be applied to a single DMAR unit, and are
erroneously skipped for the other devices.
In preparation for fixing this, rework the structures so that the iommu
pointer resides in 'struct intel_svm_dev', allowing 'struct intel_svm'
to track them in its device list.
Fixes: 1c4f88b7f1 ("iommu/vt-d: Shared virtual address in scalable mode")
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Raj Ashok <ashok.raj@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Reported-by: Guo Kaijie <Kaijie.Guo@intel.com>
Reported-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Guo Kaijie <Kaijie.Guo@intel.com>
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Tested-by: Guo Kaijie <Kaijie.Guo@intel.com>
Cc: stable@vger.kernel.org # v5.0+
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1609949037-25291-2-git-send-email-yi.l.liu@intel.com
Signed-off-by: Will Deacon <will@kernel.org>