pgt_buf is used to allocate page tables on initial direct page mapping
which bootstraps the kernel into being able to allocate these before the
direct mapping makes further pages available.
INIT_PGD_PAGE_COUNT is set to 6 pages (doubled for KASLR) - 3 (PUD, PMD,
PTE) for the 1 MiB ISA mapping and 3 more for the first direct mapping
assignment in each case providing 2 MiB of address space.
This has not been updated for 5-level page tables which has an
additional P4D page table level above PUD.
In most instances, this will not have a material impact as the first
4 page levels allocated for the ISA mapping will provide sufficient
address space to encompass all further address mappings.
If the first direct mapping is within 512 GiB of the ISA mapping, only
a PMD and PTE needs to be added in the instance the kernel is using 4
KiB page tables (e.g. CONFIG_DEBUG_PAGEALLOC is enabled) and only a PMD
if the kernel can use 2 MiB pages (the first allocation is limited to
PMD_SIZE so a GiB page cannot be used there).
However, if the machine has more than 512 GiB of RAM and the kernel is
allocating 4 KiB page size, 3 further page tables are required.
If the machine has more than 256 TiB of RAM at 4 KiB or 2 MiB page size,
further 3 or 4 page tables are required respectively.
Update INIT_PGD_PAGE_COUNT to reflect this.
[ bp: Sanitize text into passive voice without ambiguous personal pronouns. ]
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lkml.kernel.org/r/20201215205641.34096-1-lstoakes@gmail.com
KVM_ARM_PMU only existed for the benefit of 32bit ARM hosts,
and makes no sense now that we are 64bit only. Get rid of it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that we support non-blocking path resolution internally, expose it
via openat2() in the struct open_how ->resolve flags. This allows
applications using openat2() to limit path resolution to the extent that
it is already cached.
If the lookup cannot be satisfied in a non-blocking manner, openat2(2)
will return -1/-EAGAIN.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
io_uring always punts opens to async context, since there's no control
over whether the lookup blocks or not. Add LOOKUP_CACHED to support
just doing the fast RCU based lookups, which we know will not block. If
we can do a cached path resolution of the filename, then we don't have
to always punt lookups for a worker.
During path resolution, we always do LOOKUP_RCU first. If that fails and
we terminate LOOKUP_RCU, then fail a LOOKUP_CACHED attempt as well.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
same as for the previous commit - instead of 0/-ECHILD make
it return true/false, rename to try_to_unlazy_child().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Since a few years, kernel addresses are no longer included in oops
dumps, at least on x86. All we get is a symbol name with offset and
size.
This is a problem for ceph_connection_operations handlers, especially
con->ops->dispatch(). All three handlers have the same name and there
is little context to disambiguate between e.g. monitor and OSD clients
because almost everything is inlined. gdb sneakily stops at the first
matching symbol, so one has to resort to nm and addr2line.
Some of these are already prefixed with mon_, osd_ or mds_. Let's do
the same for all others.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Try and avoid leaving bits and pieces of session key and connection
secret (gets split into GCM key and a pair of GCM IVs) around.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
The BPF selftests have build time dependencies on cutting edge versions
of tools in the BPF ecosystem including LLVM which are more involved
to satisfy than more typical requirements like installing a package from
your distribution. This causes issues for users looking at kselftest in
as a whole who find that a default build of kselftest fails and that
resolving this is time consuming and adds administrative overhead. The
fast pace of BPF development and the need for a full BPF stack to do
substantial development or validation work on the code mean that people
working directly on it don't see a reasonable way to keep supporting
older environments without causing problems with the usability of the
BPF tests in BPF development so these requirements are unlikely to be
relaxed in the immediate future.
There is already support for skipping targets so in order to reduce the
barrier to entry for people interested in kselftest as a whole let's use
that to skip the BPF tests by default when people work with the top
level kselftest build system. Users can still build the BPF selftests
as part of the wider kselftest build by specifying SKIP_TARGETS,
including setting an empty SKIP_TARGETS to build everything. They can
also continue to build the BPF selftests individually in cases where
they are specifically focused on BPF.
This isn't ideal since it means people will need to take special steps
to build the BPF tests but the dependencies mean that realistically this
is already the case to some extent and it makes it easier for people to
pick up and work with the other selftests which is hopefully a net win.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix the following -Wformat warnings in vdso_test_correctness.c:
vdso_test_correctness.c: In function ‘test_one_clock_gettime64’:
vdso_test_correctness.c:352:21: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘long long int’ [-Wformat=]
352 | printf("\t%llu.%09ld %llu.%09ld %llu.%09ld\n",
| ~~~~^
| |
| long int
| %09lld
353 | (unsigned long long)start.tv_sec, start.tv_nsec,
| ~~~~~~~~~~~~~
| |
| long long int
vdso_test_correctness.c:352:32: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 5 has type ‘long long int’ [-Wformat=]
352 | printf("\t%llu.%09ld %llu.%09ld %llu.%09ld\n",
| ~~~~^
| |
| long int
| %09lld
353 | (unsigned long long)start.tv_sec, start.tv_nsec,
354 | (unsigned long long)vdso.tv_sec, vdso.tv_nsec,
| ~~~~~~~~~~~~
| |
| long long int
vdso_test_correctness.c:352:43: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 7 has type ‘long long int’ [-Wformat=]
The tv_sec member of __kernel_timespec is long long, both in
uapi/linux/time_types.h and locally in vdso_test_correctness.c.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add the test binaries introduced by commit 693f5ca08c ("kselftest:
Extend vDSO selftest"), commit 03f55c7952 ("kselftest: Extend vDSO
selftest to clock_getres") and commit c7e5789b24 ("kselftest: Move
test_vdso to the vDSO test suite") to .gitignore.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
PM8009 has special revision (P=1), which is to be used for sm8250
platform. The major difference is the S2 regulator which supplies 0.95 V
instead of 2.848V. Declare regulators data to be used for this chip
revision. The datasheet calls the chip just pm8009-1, so use the same
name.
base-commit: 5c8fe583cc
MHI hardware channels are usually the hardware accelerated data path
e.g. IP packets path for modems. This path needs to be optimized for
low latency and high throughput. After several tests on FN980m SDX55
based modem, it seems 1ms is a good default irq_moderation value:
- It allows to reach the maximum download throughput
- It introduces limited latency (5ms is too high)
- It prevents interrupt flooding
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for Diag over MHI. Qualcomm Diag is the qualcomm
diagnostics interface that can be used to collect modem logs,
events, traces, etc. It can be used by tools such QPST or QXDM.
This patch adds the DIAG channels and a dedicated event ring.
Reviewed-by Hemant Kumar <hemantk@codeaurora.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
On cold boot, device can take slightly more than 5 seconds to start.
Increase the timeout to prevent MHI power-up issues.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
If the modem crashes for any reason, we may not be able to detect
it at MHI level (MHI registers not reachable anymore).
This patch implements a health-check mechanism to check regularly
that device is alive (MHI layer can communicate with). If device
is not alive (because a crash or unexpected reset), the recovery
procedure is triggered.
Tested successfully with Telit FN980m module.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
In AER capable root complex, errors are reported to the host which
can then act accordingly and perform PCI recovering procedure.
This patch enables error reporting and implements error_detected,
slot_reset and resume callbacks.
Reviewed-by Hemant Kumar <hemantk@codeaurora.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for system wide suspend/resume. During suspend, MHI
device controller must be put in M3 state and PCI bus in D3 state.
Add a recovery procedure allowing to reinitialize the device in case
of error during resume steps, which can happen if device loses power
(and so its context) while system suspend.
Reviewed-by Hemant Kumar <hemantk@codeaurora.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add support for resetting the device, reset can be triggered in case
of error or manually via sysfs (/sys/bus/pci/devices/*/reset).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Hardware channels have a feature called burst mode that allows to
queue transfer ring element(s) (TRE) to a channel without ringing
the device doorbell. In that mode, the device is polling the channel
context for new elements. This reduces the frequency of host initiated
doorbells and increase throughput.
Create a new dedicated macro for hardware channels with burst enabled.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
If the IPA (IP hardware accelerator) is starved of event ring elements,
the modem is crashing (SDX55). That can be prevented by setting a
larger number of events (i.e 2 x number of channel ring elements).
Tested with FN980m module.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The MHI specification allows to perform a hard reset of the device
when writing to the SOC_RESET register. It can be used to completely
restart the device (e.g. in case of unrecoverable MHI error).
This is up to the MHI controller driver to determine when this hard
reset should be used, and in case of MHI errors, should be used as
a reset of last resort (after standard MHI stack reset).
This function is a stateless function, the MHI layer do nothing except
triggering the reset by writing into the right register(s), this is up
to the caller to ensure right mhi_controller state (e.g. unregister the
controller if necessary).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
kunit_tool relies on the UML console outputting printk() output to the
tty in order to get results. Since the default console driver could
change, pass 'console=tty' to the kernel.
This is triggered by a change[1] to use ttynull as a fallback console
driver which -- by chance or by design -- seems to have changed the
default console output on UML, breaking kunit_tool. While this may be
fixed, we should be less fragile to such changes in the default.
[1]:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=757055ae8dedf5333af17b3b5b4b70ba9bc9da4e
Signed-off-by: David Gow <davidgow@google.com>
Fixes: 757055ae8d ("init/console: Use ttynull as a fallback when there is no console")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Most callers check for non-zero return, and assume it's -ECHILD (which
it always will be). One caller uses the actual error return. Clean this
up and make it fully consistent, by having unlazy_walk() return a bool
instead. Rename it to try_to_unlazy() and return true on success, and
failure on error. That's easier to read.
No functional changes in this patch.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In accordance with the DWC USB3 bindings the property is supposed to have
uint32 type. It's erroneous from the DT schema and driver points of view
to declare it as boolean. As Neil suggested set it to 0x20 so not break
the platform and to make the dtbs checker happy.
Link: https://lore.kernel.org/linux-usb/20201010224121.12672-16-Sergey.Semin@baikalelectronics.ru/
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Fixes: 9baf7d6be7 ("arm64: dts: meson: g12a: Add G12A USB nodes")
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20201210091756.18057-3-Sergey.Semin@baikalelectronics.ru
When binding the ConfigFS gadget to a UDC, the functions in each
configuration are added in list order. However, if usb_add_function()
fails, the failed function is put back on its configuration's
func_list and purge_configs_funcs() is called to further clean up.
purge_configs_funcs() iterates over the configurations and functions
in forward order, calling unbind() on each of the previously added
functions. But after doing so, each function gets moved to the
tail of the configuration's func_list. This results in reshuffling
the original order of the functions within a configuration such
that the failed function now appears first even though it may have
originally appeared in the middle or even end of the list. At this
point if the ConfigFS gadget is attempted to re-bind to the UDC,
the functions will be added in a different order than intended,
with the only recourse being to remove and relink the functions all
over again.
An example of this as follows:
ln -s functions/mass_storage.0 configs/c.1
ln -s functions/ncm.0 configs/c.1
ln -s functions/ffs.adb configs/c.1 # oops, forgot to start adbd
echo "<udc device>" > UDC # fails
start adbd
echo "<udc device>" > UDC # now succeeds, but...
# bind order is
# "ADB", mass_storage, ncm
[30133.118289] configfs-gadget gadget: adding 'Mass Storage Function'/ffffff810af87200 to config 'c'/ffffff817d6a2520
[30133.119875] configfs-gadget gadget: adding 'cdc_network'/ffffff80f48d1a00 to config 'c'/ffffff817d6a2520
[30133.119974] using random self ethernet address
[30133.120002] using random host ethernet address
[30133.139604] usb0: HOST MAC 3e:27:46:ba:3e:26
[30133.140015] usb0: MAC 6e:28:7e:42:66:6a
[30133.140062] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 to config 'c'/ffffff817d6a2520
[30133.140081] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 --> -19
[30133.140098] configfs-gadget gadget: unbind function 'Mass Storage Function'/ffffff810af87200
[30133.140119] configfs-gadget gadget: unbind function 'cdc_network'/ffffff80f48d1a00
[30133.173201] configfs-gadget a600000.dwc3: failed to start g1: -19
[30136.661933] init: starting service 'adbd'...
[30136.700126] read descriptors
[30136.700413] read strings
[30138.574484] configfs-gadget gadget: adding 'Function FS Gadget'/ffffff80f3868438 to config 'c'/ffffff817d6a2520
[30138.575497] configfs-gadget gadget: adding 'Mass Storage Function'/ffffff810af87200 to config 'c'/ffffff817d6a2520
[30138.575554] configfs-gadget gadget: adding 'cdc_network'/ffffff80f48d1a00 to config 'c'/ffffff817d6a2520
[30138.575631] using random self ethernet address
[30138.575660] using random host ethernet address
[30138.595338] usb0: HOST MAC 2e:cf:43💿ca:c8
[30138.597160] usb0: MAC 6a:f0:9f:ee:82:a0
[30138.791490] configfs-gadget gadget: super-speed config #1: c
Fix this by reversing the iteration order of the functions in
purge_config_funcs() when unbinding them, and adding them back to
the config's func_list at the head instead of the tail. This
ensures that we unbind and unwind back to the original list order.
Fixes: 88af8bbe4e ("usb: gadget: the start of the configfs interface")
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20201229224443.31623-1-jackp@codeaurora.org
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pullup does not need to be enabled at below situations:
- For platforms which the hardware pullup starts after setting
register even they do not see the VBUS. If the pullup is always
enabled for these platforms, it will consume more power and
break the USB IF compliance tests [1].
- For platforms which need to do BC 1.2 charger detection after
seeing the VBUS. Pullup D+ will break the charger detection
flow.
- For platforms which the system suspend is allowed when the
connection with host is there but the bus is not at suspend.
For these platforms, it is better to disable pullup when
entering the system suspend otherwise the host may confuse
the device behavior after controller is in low power mode.
Disable pullup is considered as a disconnection event from
host side.
[1] USB-IF Full and Low Speed Compliance Test Procedure
F Back-voltage Testing
Section 7.2.1 of the USB specification requires that no device
shall supply (source) current on VBUS at its upstream facing
port at any time. From VBUS on its upstream facing port,
a device may only draw (sink) current. They may not provide power
to the pull-up resistor on D+/D- unless VBUS is present (see
Section 7.1.5).
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20201230051114.21370-1-peter.chen@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a use-after-free issue, if access udc_name
in function gadget_dev_desc_UDC_store after another context
free udc_name in function unregister_gadget.
Context 1:
gadget_dev_desc_UDC_store()->unregister_gadget()->
free udc_name->set udc_name to NULL
Context 2:
gadget_dev_desc_UDC_show()-> access udc_name
Call trace:
dump_backtrace+0x0/0x340
show_stack+0x14/0x1c
dump_stack+0xe4/0x134
print_address_description+0x78/0x478
__kasan_report+0x270/0x2ec
kasan_report+0x10/0x18
__asan_report_load1_noabort+0x18/0x20
string+0xf4/0x138
vsnprintf+0x428/0x14d0
sprintf+0xe4/0x12c
gadget_dev_desc_UDC_show+0x54/0x64
configfs_read_file+0x210/0x3a0
__vfs_read+0xf0/0x49c
vfs_read+0x130/0x2b4
SyS_read+0x114/0x208
el0_svc_naked+0x34/0x38
Add mutex_lock to protect this kind of scenario.
Signed-off-by: Eddie Hung <eddie.hung@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1609239215-21819-1-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_gadget_deactivate/usb_gadget_activate does not execute the UDC start
operation, which may leave EP0 disabled and event IRQs disabled when
re-activating the function. Move the enabling/disabling of USB EP0 and
device event IRQs to be performed in the pullup routine.
Fixes: ae7e86108b ("usb: dwc3: Stop active transfers before halting the controller")
Tested-by: Michael Tretter <m.tretter@pengutronix.de>
Cc: stable <stable@vger.kernel.org>
Reported-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1609282837-21666-1-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix shift out-of-bounds in vhci_hcd.c:
UBSAN: shift-out-of-bounds in ../drivers/usb/usbip/vhci_hcd.c:399:41
shift exponent 768 is too large for 32-bit type 'int'
Fixes: 03cd00d538 ("usbip: vhci-hcd: Set the vhci structure up to work")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: syzbot+297d20e437b79283bf6d@syzkaller.appspotmail.com
Cc: Yuyang Du <yuyang.du@intel.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201229071309.18418-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stack-allocated buffers cannot be used for DMA (on all architectures).
Replace the HP-channel macro with a helper function that allocates a
dedicated transfer buffer so that it can continue to be used with
arguments from the stack.
Note that the buffer is cleared on allocation as usblp_ctrl_msg()
returns success also on short transfers (the buffer is only used for
debugging).
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210104145302.2087-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb_f_printer gadget driver uses a default q_len value of *0* which prevents
any IO from occurring. Moreover, once the driver is instantiated it is
impossible to change the q_len value.
The following patch uses a default q_len value of 10 which matches the legacy
g_printer gadget driver. This minimizes the possibility that you end up with a
non-working printer gadget. It is still possible to set the q_len to a
different value using the configfs path of the same name.
Signed-off-by: Michael R Sweet <msweet@msweet.org>
Link: https://lore.kernel.org/r/9DFB1605-63A5-46DB-A5A4-B59B315D8115@msweet.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB gadget/UDC driver can restrict the DWC3 controller speed using
dwc3_gadget_set_speed(). Store this setting into a variable, in order for
this setting to persist across controller resets due to runtime PM.
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1609283136-22140-3-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DWC3 runtime suspend routine checks for the USB connected parameter to
determine if the controller can enter into a low power state. The
connected state is only set to false after receiving a disconnect event.
However, in the case of a device initiated disconnect (i.e. UDC unbind),
the controller is halted and a disconnect event is never generated. Set
the connected flag to false if issuing a device initiated disconnect to
allow the controller to be suspended.
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1609283136-22140-2-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a specific composite reset API to differentiate between disconnect and
reset events. This is needed for adjusting the current draw accordingly
based on the USB battery charging specification. The device is only allowed
to draw the 500/900 mA (HS/SS) while in the CONFIGURED state, and only 100 mA
in the connected and UNCONFIGURED state.
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1609283011-21997-3-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some devices support charging while in device mode. In these situations,
the USB gadget will notify the DWC3 gadget driver to modify the current
based on the enumeration and device state. The usb_phy_set_power() API
will allow external charger entities to adjust the charge current through
the notifier block.
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1609283011-21997-2-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable usb host port with type-A connector on imx8mp-evk board.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1609241866-9508-5-git-send-email-jun.li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
imx8mp integrates 2 identical dwc3 based USB3 controllers and
Synopsys phys, each instance has additional wakeup logic to
support low power mode, so the glue layer need a node with dwc3
core sub node.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1609241866-9508-4-git-send-email-jun.li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
imx8mp SoC integrate dwc3 3.30b IP and has some customizations to
support low power, which has a seprated wakeup irq and additional
logic to wakeup usb from low power mode both for host mode and
device mode.
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1609241866-9508-3-git-send-email-jun.li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
NXP imx8mp integrates 2 dwc3 3.30b IP and add some wakeup logic
to support low power mode, the glue layer is for this wakeup
functionality, which has a separated interrupt, can support
wakeup from U3 and connect events for host, and vbus wakeup for
device.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1609241866-9508-2-git-send-email-jun.li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clevo W35xSS_370SS with VIA codec has had the runtime PM problem that
looses the power state of some nodes after the runtime resume. This
was worked around by disabling the default runtime PM via a denylist
entry. Since 5.10.x made the runtime PM applied (casually) even
though it's disabled in the denylist, this problem was revisited. The
result was that disabling power_save_node feature suffices for the
runtime PM problem.
This patch implements the disablement of power_save_node feature in
VIA codec for the device. It also drops the former denylist entry,
too, as the runtime PM should work in the codec side properly now.
Fixes: b529ef2464 ("ALSA: hda: Add Clevo W35xSS_370SS to the power_save blacklist")
Reported-by: Christian Labisch <clnetbox@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210104153046.19993-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stack-allocated buffers cannot be used for DMA (on all architectures) so
allocate the flush command buffer using kmalloc().
Fixes: 60a8fc0171 ("USB: add iuu_phoenix driver")
Cc: stable <stable@vger.kernel.org> # 2.6.25
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Without crc32 support, this driver fails to link:
arm-linux-gnueabi-ld: drivers/hid/hid-sony.o: in function `sony_raw_event':
hid-sony.c:(.text+0x8f4): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: hid-sony.c:(.text+0x900): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/hid/hid-sony.o:hid-sony.c:(.text+0x4408): more undefined references to `crc32_le' follow
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The new driver uses a phys_addr_t to store a DMA address,
which does not work when the two are different size:
drivers/hid/amd-sfh-hid/amd_sfh_client.c:157:11: error: incompatible pointer types passing 'phys_addr_t *' (aka 'unsigned int *') to parameter of type 'dma_addr_t *' (aka 'unsigned long long *') [-Werror,-Wincompatible-pointer-types]
&cl_data->sensor_phys_addr[i],
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/dma-mapping.h:393:15: note: passing argument to parameter 'dma_handle' here
dma_addr_t *dma_handle, gfp_t gfp)
^
Change both the type and the variable name to dma_addr for consistency.
Fixes: 4b2c53d93a ("SFH:Transport Driver to add support of AMD Sensor Fusion Hub (SFH)")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The SCU offset for signal PWM8 in group PWM8G0 is wrong, fix it from
SCU414 to SCU4B4.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Fixes: 2eda1cdec4 ("pinctrl: aspeed: Add AST2600 pinmux support")
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20201217024912.3198-1-billy_tsai@aspeedtech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
lkp reported that CONFIG_DEBUG_FS was not defined because of wrong usage
if macro, correcting it now.
Fixes: 156ec4731c ("platform/x86: amd-pmc: Add AMD platform support for S2Idle")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20201230081028.2615217-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>