Commit graph

1,169,205 commits

Author SHA1 Message Date
Greg Kroah-Hartman
1f82c33205 Revert "staging: board: Remove macro board_staging"
This reverts commit 850c35bb28 as it
breaks the build.

Cc: Song Chen <chensong_2000@189.cn>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20210104122653.6f35b9bb@canb.auug.org.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-04 15:55:40 +01:00
Mark Pearson
aa44afab87 platform/x86: thinkpad_acpi: correct palmsensor error checking
The previous commit adding functionality for the palm sensor had a
mistake which meant the error conditions on initialisation was not checked
correctly. On some older platforms this meant that if the sensor wasn't
available an error would be returned and the driver would fail to load.

This commit corrects the error condition. Many thanks to Mario Oenning
for reporting and determining the issue

Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20201230024726.7861-1-markpearson@lenovo.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-04 15:55:30 +01:00
Arnold Gozum
fcd38f178b platform/x86: intel-vbtn: Support for tablet mode on Dell Inspiron 7352
The Dell Inspiron 7352 is a 2-in-1 model that has chassis-type "Notebook".
Add this model to the dmi_switches_allow_list.

Signed-off-by: Arnold Gozum <arngozum@gmail.com>
Link: https://lore.kernel.org/r/20201226205307.249659-1-arngozum@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-04 15:54:45 +01:00
Hans de Goede
46c54cf270 platform/x86: touchscreen_dmi: Add swap-x-y quirk for Goodix touchscreen on Estar Beauty HD tablet
The Estar Beauty HD (MID 7316R) tablet uses a Goodix touchscreen,
with the X and Y coordinates swapped compared to the LCD panel.

Add a touchscreen_dmi entry for this adding a "touchscreen-swapped-x-y"
device-property to the i2c-client instantiated for this device before
the driver binds.

This is the first entry of a Goodix touchscreen to touchscreen_dmi.c,
so far DMI quirks for Goodix touchscreen's have been added directly
to drivers/input/touchscreen/goodix.c. Currently there are 3
DMI tables in goodix.c:
1. rotated_screen[] for devices where the touchscreen is rotated
   180 degrees vs the LCD panel
2. inverted_x_screen[] for devices where the X axis is inverted
3. nine_bytes_report[] for devices which use a non standard touch
   report size

Arguably only 3. really needs to be inside the driver and the other
2 cases are better handled through the generic touchscreen DMI quirk
mechanism from touchscreen_dmi.c, which allows adding device-props to
any i2c-client. Esp. now that goodix.c is using the generic
touchscreen_properties code.

Alternative to the approach from this patch we could add a 4th
dmi_system_id table for devices with swapped-x-y axis to goodix.c,
but that seems undesirable.

Cc: Bastien Nocera <hadess@hadess.net>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201224135158.10976-1-hdegoede@redhat.com
2021-01-04 15:54:45 +01:00
Heikki Krogerus
9bba962755 platform/x86: i2c-multi-instantiate: Don't create platform device for INT3515 ACPI nodes
There are several reports about the tps6598x causing
interrupt flood on boards with the INT3515 ACPI node, which
then causes instability. There appears to be several
problems with the interrupt. One problem is that the
I2CSerialBus resources do not always map to the Interrupt
resource with the same index, but that is not the only
problem. We have not been able to come up with a solution
for all the issues, and because of that disabling the device
for now.

The PD controller on these platforms is autonomous, and the
purpose for the driver is primarily to supply status to the
userspace, so this will not affect any functionality.

Reported-by: Moody Salem <moody@uniswap.org>
Fixes: a3dd034a17 ("ACPI / scan: Create platform device for INT3515 ACPI nodes")
Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1883511
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20201223143644.33341-1-heikki.krogerus@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-04 15:54:45 +01:00
Geert Uytterhoeven
e4a02c7a0e platform/surface: SURFACE_PLATFORMS should depend on ACPI
All Microsoft Surface platform-specific device drivers depend on ACPI,
but the gatekeeper symbol SURFACE_PLATFORMS does not.  Hence when the
user is configuring a kernel without ACPI support, he is still asked
about Microsoft Surface drivers, even though this question is
irrelevant.

Fix this by moving the dependency on ACPI from the individual driver
symbols to SURFACE_PLATFORMS.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20201216133752.1321978-1-geert@linux-m68k.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-04 15:54:45 +01:00
Randy Dunlap
6a4b1f2dff platform/surface: surface_gpe: Fix non-PM_SLEEP build warnings
Fix build warnings when CONFIG_PM_SLEEP is not enabled and these
functions are not used:

../drivers/platform/surface/surface_gpe.c:189:12: warning: ‘surface_gpe_resume’ defined but not used [-Wunused-function]
 static int surface_gpe_resume(struct device *dev)
            ^~~~~~~~~~~~~~~~~~
../drivers/platform/surface/surface_gpe.c:184:12: warning: ‘surface_gpe_suspend’ defined but not used [-Wunused-function]
 static int surface_gpe_suspend(struct device *dev)
            ^~~~~~~~~~~~~~~~~~~

Fixes: 274335f1c5 ("platform/surface: Add Driver to set up lid GPEs on MS Surface device")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Maximilian Luz <luzmaximilian@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: platform-driver-x86@vger.kernel.org
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20201214233336.19782-1-rdunlap@infradead.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-04 15:54:27 +01:00
Srinivas Pandruvada
bbaa2e95e2 tools/power/x86/intel-speed-select: Set higher of cpuinfo_max_freq or base_frequency
In some case when BIOS disabled turbo, cpufreq cpuinfo_max_freq can be
lower than base_frequency at higher config level. So, in that case set
scaling_min_freq to base_frequency.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20201221071859.2783957-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-04 15:54:27 +01:00
Srinivas Pandruvada
f981dc171c tools/power/x86/intel-speed-select: Set scaling_max_freq to base_frequency
When BIOS disables turbo, The scaling_max_freq in cpufreq sysfs will be
limited to config level 0 base frequency. But when user selects a higher
config levels, this will result in higher base frequency. But since
scaling_max_freq is still old base frequency, the performance will still
be limited. So when the turbo is disabled and cpufreq base_frequency is
higher than scaling_max_freq, update the scaling_max_freq to the
base_frequency.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20201221071859.2783957-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-04 15:54:27 +01:00
Sergio Paracuellos
c6d212951b pinctrl: ralink: rt2880: fix '-Wmissing-prototypes' in init function
Kernel test robot reported the following warning:
'warning: no previous prototype for 'rt2880_pinmux_init''.
This function is the entry point for the platform driver and
it is private to this driver. Hence declare it 'static' which is
the correct thing to do fixing also this warning.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20201228064727.30098-1-sergio.paracuellos@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04 15:40:02 +01:00
Sergio Paracuellos
50a7108733 pinctrl: ralink: rt2880: use 'PTR_ERR_OR_ZERO'
Avoid some boilerplate code using 'PTR_ERR_OR_ZERO'
 in probe function.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201213161721.6514-8-sergio.paracuellos@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04 15:38:35 +01:00
Sergio Paracuellos
8a55d64c33 pinctrl: ralink: rt2880: preserve error codes
Some paths in probe function are returning '-EINVAL'
instead of preserve original code from called functions.
Change them to preserve all of them.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201213161721.6514-7-sergio.paracuellos@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04 15:38:34 +01:00
Sergio Paracuellos
420cf17d97 pinctrl: ralink: rt2880: delete not needed error message
When '-ENOMEM' is returned there is not need at all to
add custom error messages. Hence delete it.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201213161721.6514-6-sergio.paracuellos@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04 15:38:34 +01:00
Sergio Paracuellos
09f8101d31 pinctrl: ralink: rt2880: add missing NULL check
Memory is being requested to the kernel but there is
a missing check for NULL. Hence, add it.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201213161721.6514-5-sergio.paracuellos@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04 15:38:34 +01:00
Sergio Paracuellos
7391031be7 pinctrl: ralink: rt2880: return proper error code
Check for NULL shall return '-ENOMEM' instead of '-1'.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201213161721.6514-4-sergio.paracuellos@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04 15:38:34 +01:00
Sergio Paracuellos
53abfe67f0 pinctrl: ralink: rt2880: avoid double pointer to simplify code
Double pointer is being used and assigned in a bit dirty way to
assign functions in pinctrl. Instead of doing this just avoid it
and use directly 'p->func' instead.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201213161721.6514-3-sergio.paracuellos@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04 15:38:34 +01:00
Sergio Paracuellos
86e666df40 dt-bindings: pinctrl: rt2880: properly redo bindings
When this bindings where applied there weren't already
reviewed and some old hacks was being used to properly
pass the schemas checks. This commits fix them up:
 - Instead of using 'if-then' clause use '-pins$'.
 - 'groups' and 'function' are included inside a new
   '^(.*-)?pinmux$' node.
 - compatible string is not an 'enum' but a 'const'.
 - 'pinctrl-0' and 'pinctrl-names' removed since they are
    used in consumer nodes.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201213161721.6514-2-sergio.paracuellos@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04 15:38:34 +01:00
Paul Cercueil
b4aa4876e5 pinctrl: ingenic: Rename registers from JZ4760_GPIO_* to JZ4770_GPIO_*
Now that JZ4760 support has been fixed, it looks wrong to have
JZ4760_GPIO_* registers being written if the SoC is a JZ4770 or later.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201211232810.261565-2-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04 15:34:16 +01:00
Paul Cercueil
9a85c09a3f pinctrl: ingenic: Fix JZ4760 support
- JZ4760 and JZ4760B have a similar register layout as the JZ4740, and
  don't use the new register layout, which was introduced with the
  JZ4770 SoC and not the JZ4760 or JZ4760B SoCs.

- The JZ4740 code path only expected two function modes to be
  configurable for each pin, and wouldn't work with more than two. Fix
  it for the JZ4760, which has four configurable function modes.

Fixes: 0257595a5c ("pinctrl: Ingenic: Add pinctrl driver for JZ4760 and JZ4760B.")
Cc: <stable@vger.kernel.org> # 5.3
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201211232810.261565-1-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04 15:34:16 +01:00
Zheng Yongjun
502045d91a pinctrl: ti-iodelay: convert comma to semicolon
Replace a comma between expression statements by a semicolon.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20201211084902.2480-1-zhengyongjun3@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04 15:31:51 +01:00
Zheng Yongjun
0014d7a9c0 pinctrl: mediatek: moore: convert comma to semicolon
Replace a comma between expression statements by a semicolon.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20201211084801.2425-1-zhengyongjun3@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04 15:30:26 +01:00
Georgi Djakov
4b1a60a1bb MAINTAINERS: Update Georgi's email address
Use my kernel.org email as main address to make things a bit easier
for me to handle.

Link: https://lore.kernel.org/r/20210104135043.31262-1-georgi.djakov@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2021-01-04 16:29:45 +02:00
Zheng Yongjun
8ad5749395 pinctrl: mediatek: paris: convert comma to semicolon
Replace a comma between expression statements by a semicolon.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20201211084717.2371-1-zhengyongjun3@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04 15:29:19 +01:00
Zheng Yongjun
46e5dbe7f3 pinctrl: at91: convert comma to semicolon
Replace a comma between expression statements by a semicolon.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20201211084541.2318-1-zhengyongjun3@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04 15:29:11 +01:00
Adam Ford
f4a10fc422
spi: renesas rpc-if: Update Add RZ/G2 to Kconfig description
The SPI driver for the Renesas RPC-IF is present on the RZ/G2
Series.  Add that to the description.

Suggested-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210102115412.3402059-3-aford173@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04 14:26:18 +00:00
Daniel Scally
90cf443d84
regulator: core.c: Replace references to non-existent function
The function regulator_set_device_supply() is referenced a few times in
comments in regulator/core.c; however this function was removed a long
time ago by commit a5766f11cf ("regulator: core - Rework machine API to
remove string based functions."). Update those references to point to
set_consumer_device_supply(), which replaced the old function.

Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20210103165541.784360-1-djrscally@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04 14:26:17 +00:00
Arnd Bergmann
d957d1610c
regulator: qcom-rpmh: add QCOM_COMMAND_DB dependency
A built-in regulator driver cannot link against a modular cmd_db driver:

qcom-rpmh-regulator.c:(.text+0x174): undefined reference to `cmd_db_read_addr'

There is already a dependency for RPMh, so add another one of this
type for cmd_db.

Fixes: 34c5aa2666 ("regulator: Kconfig: Fix REGULATOR_QCOM_RPMH dependencies to avoid build error")
Fixes: 46fc033eba ("regulator: add QCOM RPMh regulator driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201230145712.3133110-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04 14:26:15 +00:00
Dmitry Baryshkov
c3da024212
arm64: dts: qcom: qrb5165-rb5: fix pm8009 regulators
Fix pm8009 compatibility string to reference pm8009 revision specific to
sm8250 platform. Also add S2 regulator to be used for qca639x.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: b1d2674e61 ("arm64: dts: qcom: Add basic devicetree support for QRB5165 RB5")
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201231122348.637917-5-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04 14:25:05 +00:00
Dmitry Baryshkov
951384cabc
regulator: qcom-rpmh-regulator: add pm8009-1 chip revision
PM8009 has special revision (P=1), which is to be used for sm8250
platform. The major difference is the S2 regulator which supplies 0.95 V
instead of 2.848V. Declare regulators data to be used for this chip
revision. The datasheet calls the chip just pm8009-1, so use the same
name.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 06369bcc15 ("regulator: qcom-rpmh: Add support for SM8150")
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201231122348.637917-4-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04 14:25:04 +00:00
Dmitry Baryshkov
df6b92fa40
regulator: qcom-rpmh-regulator: correct hfsmps515 definition
According to the datasheet pm8009's HFS515 regulators have 16mV
resolution rather than declared 1.6 mV. Correct the resolution.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 06369bcc15 ("regulator: qcom-rpmh: Add support for SM8150")
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201231122348.637917-3-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04 14:25:03 +00:00
Dmitry Baryshkov
2bf3a72b08
dt-bindings: regulator: qcom,rpmh-regulator: add pm8009 revision
PMIC pm8009 has special revision (P=1) made for sm8250 platform. The
major difference is the S2 regulator which supplies 0.95 V instead of
2.848V. Add special compatibility string for this chip revision.
The datasheet calls the chip just pm8009-1, so use the same name.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201231122348.637917-2-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04 14:25:02 +00:00
Arnd Bergmann
a1f31cc4e9
ASoC: fsl_aud2htx: select SND_SOC_IMX_PCM_DMA
The newly added driver requires DMA support and fails to build
when that is disabled:

aarch64-linux-ld: sound/soc/fsl/fsl_aud2htx.o: in function `fsl_aud2htx_probe':
fsl_aud2htx.c:(.text+0x3e0): undefined reference to `imx_pcm_dma_init'

Fixes: 8a24c834c0 ("ASoC: fsl_aud2htx: Add aud2htx module driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20210103135327.3630973-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04 14:25:00 +00:00
Adam Ford
e33c93b220
ASoC: wm8962: Add optional mclk device tree binding
The driver can request an optional clock for mclk.
Update the txt file to reflect this.

Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201217162740.1452000-1-aford173@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04 14:24:59 +00:00
Xu Yilun
6170d077bf
spi: fix the divide by 0 error when calculating xfer waiting time
The xfer waiting time is the result of xfer->len / xfer->speed_hz. This
patch makes the assumption of 100khz xfer speed if the xfer->speed_hz is
not assigned and stays 0. This avoids the divide by 0 issue and ensures
a reasonable tolerant waiting time.

Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/1609723749-3557-1-git-send-email-yilun.xu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-04 14:24:58 +00:00
Michael Klein
397546ac9c
ARM: dts: sun6i-a31s-sinovoip-bpi-m2: add gpio-line-names
Add gpio-line-names as documented on gitbooks [1] and in the
schematics [2].

[1]: https://bananapi.gitbook.io/bpi-m2/en/bpi-m2_gpio_pin_define
[2]: https://drive.google.com/file/d/0B4PAo2nW2KfnRERWNnJGSGxJbmM/view

Signed-off-by: Michael Klein <michael@fossekall.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20201202195144.2105036-1-michael@fossekall.de
2021-01-04 14:52:21 +01:00
Kai-Heng Feng
c3d6eb6e54 HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device
Pointstick and its left/right buttons on HP EliteBook 850 G7 need
multi-input quirk to work correctly.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-01-04 14:32:46 +01:00
Po-Hsu Lin
3db380570a selftests/powerpc: Make the test check in eeh-basic.sh posix compliant
The == operand is a bash extension, thus this will fail on Ubuntu
with:
  ./eeh-basic.sh: 89: test: 2: unexpected operator

As the /bin/sh on Ubuntu is pointed to DASH.

Use -eq to fix this posix compatibility issue.

Fixes: 996f9e0f93 ("selftests/powerpc: Fix eeh-basic.sh exit codes")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201228043459.14281-1-po-hsu.lin@canonical.com
2021-01-05 00:00:29 +11:00
Christophe Leroy
98bf2d3f49 powerpc/32s: Fix RTAS machine check with VMAP stack
When we have VMAP stack, exception prolog 1 sets r1, not r11.

When it is not an RTAS machine check, don't trash r1 because it is
needed by prolog 1.

Fixes: da7bb43ab9 ("powerpc/32: Fix vmap stack - Properly set r1 before activating MMU")
Fixes: d2e0060360 ("powerpc/32: Use SPRN_SPRG_SCRATCH2 in exception prologs")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Squash in fixup for RTAS machine check from Christophe]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bc77d61d1c18940e456a2dee464f1e2eda65a3f0.1608621048.git.christophe.leroy@csgroup.eu
2021-01-04 23:59:25 +11:00
Shravya Kumbham
2d5efea644 dmaengine: xilinx_dma: fix mixed_enum_type coverity warning
Typecast the fls(width -1) with (enum dmaengine_alignment) in
xilinx_dma_chan_probe function to fix the coverity warning.

Addresses-Coverity: Event mixed_enum_type.
Fixes: 9cd4360de6 ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support")
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1608722462-29519-4-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-04 18:12:39 +05:30
Shravya Kumbham
faeb0731be dmaengine: xilinx_dma: fix incompatible param warning in _child_probe()
In xilinx_dma_child_probe function, the nr_channels variable is
passed to of_property_read_u32() which expects an u32 return value
pointer. Modify the nr_channels variable type from int to u32 to
fix the incompatible parameter coverity warning.

Addresses-Coverity: Event incompatible_param.
Fixes: 1a9e7a03c7 ("dmaengine: vdma: Add support for mulit-channel dma mode")
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1608722462-29519-3-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-04 18:12:39 +05:30
Shravya Kumbham
99974aedbd dmaengine: xilinx_dma: check dma_async_device_register return value
dma_async_device_register() can return non-zero error code. Add
condition to check the return value of dma_async_device_register
function and handle the error path.

Addresses-Coverity: Event check_return.
Fixes: 9cd4360de6 ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support")
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1608722462-29519-2-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-04 18:12:39 +05:30
Arnd Bergmann
0bd1bf86ab dmaengine: qcom: fix gpi undefined behavior
gcc points out an incorrect error handling loop:

drivers/dma/qcom/gpi.c: In function 'gpi_ch_init':
drivers/dma/qcom/gpi.c:1254:15: error: iteration 2 invokes undefined behavior [-Werror=aggressive-loop-optimizations]
 1254 |  struct gpii *gpii = gchan->gpii;
      |               ^~~~
drivers/dma/qcom/gpi.c:1951:2: note: within this loop
 1951 |  for (i = i - 1; i >= 0; i++) {
      |  ^~~

Change the loop to correctly walk backwards through the
initialized fields rather than off into the woods.

Fixes: 5d0c3533a1 ("dmaengine: qcom: Add GPI dma driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210103135738.3741123-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-01-04 18:08:36 +05:30
Chris Wilson
2b2779917a drm/i915/gt: Rearrange hsw workarounds
Some rcs0 workarounds were being incorrectly applied to the GT, and so
we failed to restore the expected register settings after a reset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210104114914.30165-2-chris@chris-wilson.co.uk
2021-01-04 12:36:31 +00:00
Chris Wilson
81dc2ddc26 drm/i915/gt: Rearrange snb workarounds
Some rcs0 workarounds were being incorrectly applied to the GT, and so
we failed to restore the expected register settings after a reset.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210104114914.30165-1-chris@chris-wilson.co.uk
2021-01-04 12:36:30 +00:00
David Howells
366911cd76 afs: Fix directory entry size calculation
The number of dirent records used by an AFS directory entry should be
calculated using the assumption that there is a 16-byte name field in the
first block, rather than a 20-byte name field (which is actually the case).
This miscalculation is historic and effectively standard, so we have to use
it.

The calculation we need to use is:

	1 + (((strlen(name) + 1) + 15) >> 5)

where we are adding one to the strlen() result to account for the NUL
termination.

Fix this by the following means:

 (1) Create an inline function to do the calculation for a given name
     length.

 (2) Use the function to calculate the number of records used for a dirent
     in afs_dir_iterate_block().

     Use this to move the over-end check out of the loop since it only
     needs to be done once.

     Further use this to only go through the loop for the 2nd+ records
     composing an entry.  The only test there now is for if the record is
     allocated - and we already checked the first block at the top of the
     outer loop.

 (3) Add a max name length check in afs_dir_iterate_block().

 (4) Make afs_edit_dir_add() and afs_edit_dir_remove() use the function
     from (1) to calculate the number of blocks rather than doing it
     incorrectly themselves.

Fixes: 63a4681ff3 ("afs: Locally edit directory data for mkdir/create/unlink/...")
Fixes: ^1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
2021-01-04 12:25:19 +00:00
David Howells
26982a89ca afs: Work around strnlen() oops with CONFIG_FORTIFIED_SOURCE=y
AFS has a structured layout in its directory contents (AFS dirs are
downloaded as files and parsed locally by the client for lookup/readdir).
The slots in the directory are defined by union afs_xdr_dirent.  This,
however, only directly allows a name of a length that will fit into that
union.  To support a longer name, the next 1-8 contiguous entries are
annexed to the first one and the name flows across these.

afs_dir_iterate_block() uses strnlen(), limited to the space to the end of
the page, to find out how long the name is.  This worked fine until
6a39e62abb.  With that commit, the compiler determines the size of the
array and asserts that the string fits inside that array.  This is a
problem for AFS because we *expect* it to overflow one or more arrays.

A similar problem also occurs in afs_dir_scan_block() when a directory file
is being locally edited to avoid the need to redownload it.  There strlen()
was being used safely because each page has the last byte set to 0 when the
file is downloaded and validated (in afs_dir_check_page()).

Fix this by changing the afs_xdr_dirent union name field to an
indeterminate-length array and dropping the overflow field.

(Note that whilst looking at this, I realised that the calculation of the
number of slots a dirent used is non-standard and not quite right, but I'll
address that in a separate patch.)

The issue can be triggered by something like:

        touch /afs/example.com/thisisaveryveryverylongname

and it generates a report that looks like:

        detected buffer overflow in strnlen
        ------------[ cut here ]------------
        kernel BUG at lib/string.c:1149!
        ...
        RIP: 0010:fortify_panic+0xf/0x11
        ...
        Call Trace:
         afs_dir_iterate_block+0x12b/0x35b
         afs_dir_iterate+0x14e/0x1ce
         afs_do_lookup+0x131/0x417
         afs_lookup+0x24f/0x344
         lookup_open.isra.0+0x1bb/0x27d
         open_last_lookups+0x166/0x237
         path_openat+0xe0/0x159
         do_filp_open+0x48/0xa4
         ? kmem_cache_alloc+0xf5/0x16e
         ? __clear_close_on_exec+0x13/0x22
         ? _raw_spin_unlock+0xa/0xb
         do_sys_openat2+0x72/0xde
         do_sys_open+0x3b/0x58
         do_syscall_64+0x2d/0x3a
         entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 6a39e62abb ("lib: string.h: detect intra-object overflow in fortified string functions")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: Daniel Axtens <dja@axtens.net>
2021-01-04 12:25:19 +00:00
Michael Tretter
ecd07f4b9d media: allegro: rename stream_id to dst_handle
The dst_handle field in the PUT_STREAM_BUFFER and ENCODE_FRAME_RESPONSE
is used to retrieve the V4L2 CAPTURE buffer. Calling it stream_id is
confusing. Call it dst_handle inspired by src_handle for the OUTPUT
buffer.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-04 13:22:54 +01:00
Michael Tretter
0e13f6f6ff media: allegro: remove custom drain state handling
The v4l2-m2m has various helpers for correctly handle the draining. Drop
the driver specific state machine and use the m2m helper functions.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-04 13:22:27 +01:00
Michael Tretter
0f3cc7cac0 media: dt-bindings: media: allegro,al5e: Convert to YAML
Convert the Allegro DVT video IP codec text binding to Yaml.

Add the converted binding to the MAINTAINERS file.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-04 13:21:40 +01:00
Michael Tretter
d74d4e2359 media: allegro: move driver out of staging
The stateful encoder API was finalized. Nothing is blocking the driver
from being moved out of staging.

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-04 13:19:40 +01:00