Re-add the multiply by 8 to "step * eccsize" to correct the destination bit offset
when extracting the data payload in gpmi_ecc_read_page_raw().
Fixes: e5e5631cc8 ("mtd: rawnand: gpmi: Use nand_extract_bits()")
Cc: stable@vger.kernel.org
Reported-by: Martin Hundebøll <martin@geanix.com>
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201221100013.2715675-1-sean@geanix.com
The vb2 queue ensures that the start streaming operation will only be
called with a minimal number of buffers queued to the driver. There's
thus no need to manually check if the DMA queue is empty. Remove the
check.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The cal_calc_format_size() function checks that the passed fmtinfo
argument is not NULL. All callers ensure that the pointer is valid. Drop
the check.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Systems configured with CONFIG_ZONE_DMA32, CONFIG_ZONE_NORMAL and
!CONFIG_ZONE_DMA will fail to properly setup ARCH_LOW_ADDRESS_LIMIT. The
limit will default to ~0ULL, effectively spanning the whole memory,
which is too high for a configuration that expects low memory to be
capped at 4GB.
Fix ARCH_LOW_ADDRESS_LIMIT by falling back to arm64_dma32_phys_limit
when arm64_dma_phys_limit isn't set. arm64_dma32_phys_limit will honour
CONFIG_ZONE_DMA32, or span the entire memory when not enabled.
Fixes: 1a8e1cef76 ("arm64: use both ZONE_DMA and ZONE_DMA32")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20201218163307.10150-1-nsaenzjulienne@suse.de
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
arch/arm64/kernel/smp.c: In function ‘arch_show_interrupts’:
arch/arm64/kernel/smp.c:808:16: warning: unused variable ‘irq’ [-Wunused-variable]
808 | unsigned int irq = irq_desc_get_irq(ipi_desc[i]);
| ^~~
The removal of the last user forgot to remove the variable.
Fixes: 5089bc51f8 ("arm64/smp: Use irq_desc_kstat_cpu() in arch_show_interrupts()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20201215103026.2872532-1-geert+renesas@glider.be
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Do basic editing & correction to hid-alps.rst:
- correct a file name (.txt -> .rst)
- use less hyphenation when not needed
- fix grammar & punctuation
- fix article adjectives
- fix typos/spellos
- use HID instead of hid consistently
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Do basic editing & correction to hidraw.rst:
- use "hidraw" consistently except at the beginning of a sentence
- add archive.org URL for signal11.us since the latter seems to be MIA
- use a list for 2 URLs so that they don't run together
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: Alan Ott <alan@signal11.us>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Do basic editing & correction to intel-ish-hid.rst:
- fix grammar, verb tense, punctutation, and word phrasing
- fix spellos
- hyphenate multi-word adjectives
- collapse 2 spaces to one space in the middle of sentences
- use "I2C" instead of lower-case letters (as Linux I2C does)
- change space indentation to tab
- use HID instead of hid consistently
- use a list so that some line items do not run together
- use "a UUID" instead of "an UUID"
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: linux-input@vger.kernel.org
Cc: linux-iio@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Do basic editing & correction to hiddev.rst:
- use HID instead of hid consistently
- add hyphenation of multi-word adjectives
- drop a duplicate word
- unhyphenate "a priori"
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The V4L2 read/write API is inefficient and makes little sense for
devices that handle frame-based formats. Applications shouldn't use it,
drop its support from the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The cal_start_streaming() and cal_stop_streaming() functions duplicate
the same buffer release logic. split it to a separate function to share
the code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The cal_start_streaming() and cal_stop_streaming() functions are called
with interrupts enabled. spin_lock_irq() can thus be used instead of
spin_lock_irqsave().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When stopping the stream, the driver needs to ensure that ongoing DMA
completes and that no new DMA is started. It does so using a feature of
the PPI that can be stopped on a frame boundary. The downside of this
mechanism is that the DMA can't be stopped independently of the source,
which prevents usage of multiple contexts for the same source (to handle
CSI-2 virtual channels or data types).
Rework the stream stop mechanism to stop the write DMA without disabling
the PPI first. The new mechanism relies on the combination of a state
machine in the driver and shadowing of the CAL_WR_DMA_CTRL_j.MODE field
in the hardware. When a stop is requested, the DMA start interrupt
handler will request the hardware to stop at the end of the current
frame by disabling the write DMA context in the shadowed register, and
flag that a stop is in progress. The next DMA end interrupt will then
report that the stop is complete.
This makes it possible to stop the PPI after stopping the DMA, and fold
the cal_camerarx_ppi_disable() call into cal_camerarx_stop().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The XTAL clock is provided via .dts since Linux 5.6. Remove
compatibility code for .dtbs which are older than that.
The switch to the HHI syscon has been done with Linux 5.1. Also remove
any code needed to support .dtbs that have not switched to the HHI
syscon yet.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201221183624.932649-2-martin.blumenstingl@googlemail.com
Popagate the error code from meson_clk_pll_set_rate() when the PLL does
not lock with the new settings.
Fixes: 722825dcd5 ("clk: meson: migrate plls clocks to clk_regmap")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201226121556.975418-4-martin.blumenstingl@googlemail.com
The error codes returned by meson_clk_get_pll_settings() are all
negative. Make "ret" a signed integer in meson_clk_pll_set_rate() to
make it match with the clk_ops.set_rate API as well as the data type
returned by meson_clk_get_pll_settings().
Fixes: 8eed1db1ad ("clk: meson: pll: update driver for the g12a")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201226121556.975418-3-martin.blumenstingl@googlemail.com
The "rate" parameter in meson_clk_pll_set_rate() contains the new rate.
Retrieve the old rate with clk_hw_get_rate() so we don't inifinitely try
to switch from the new rate to the same rate again.
Fixes: 7a29a86943 ("clk: meson: Add support for Meson clock controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201226121556.975418-2-martin.blumenstingl@googlemail.com
To further decouple the context and CAMERARX components, move the call
to cal_camerarx_ppi_enable() from cal_start_streaming() to the CAMERARX
.s_stream() operation. The DMA destination address has to be set before
starting the CAMERARX, which is desirable anyway.
cal_camerarx_ppi_disable() will be addressed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch fixes:
"WARNING: Block comments use a trailing */ on a separate line"
by checkpatch.pl
Signed-off-by: siyanteng <siyanteng@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Interrupts are enabled and disabled by the cal_camerarx_enable_irqs()
and cal_camerarx_disable_irqs(). Despite their name, they deal with all
interrupts, not just the CAMERARX interrupts, and they hardcode the
assumption that the context index is identical to the CAMERARX index.
Split the context-related interrupt management to two new functions,
cal_ctx_enable_irqs() and cal_ctx_disable_irqs(), called from the
cal_start_streaming() and cal_stop_streaming() functions. The explicit
calls to cal_camerarx_enable_irqs() and cal_camerarx_disable_irqs() are
folded with the CAMERARX .s_stream() operation to simplify the CAMERARX
API.
Enabling the OCPO error interrupt is moved to the PM runtime resume
operation, as it's global to the device, not related to a CAMERARX or
context. The VC IRQ enable and disable are removed as they're not used,
the parent interrupt bit (CAL_HL_IRQ_VC_MASK) never being set.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The cal_fmt structure stores information about a format. Its name is
ambiguous, as it could be understood as storing a format. Furthermore,
instances of the structure are called 'fmt' through the code, which
leads to confusion with the 'format' variables. Rename the structure to
cal_format_info, and the corresponding 'fmt' variables to 'fmtinfo'.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
RM7000 IRQ driver never got really used by any of the platform,
and rm9k_cpu_irq_init only exist in a header.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The cal_ctx_wr_dma_config() function has access to the context, there's
no need to give it format-related values retrieved from the context.
Access the values internally, and reword internal comments. The comment
regarding the CAL_WR_DMA_OFST register not being well understood is
dropped, as the datasheet explicitly documents it as "Offset between two
consecutive line starts".
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Replace calls to cal_camerarx_start() and cal_camerarx_stop() with usage
of the .s_stream() subdev operation. This requires calling the
.set_fmt() operation as the CAMERARX now relies on the format
information set through the subdev API instead of receiving it in the
cal_camerarx_start() function.
This change prepare for exposing the CAMERARX subdev operations to
userspace by using the same API within the kernel.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Implement subdev operations for the CAMERARX. They will be used to
replace calls to custom CAMERARX functions in the V4L2 video device
code, and will be exposed to userspace.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
A driver must not set drm_crtc.cursor and any of the legacy funcs at the
same time, otherwise it's not clear which one DRM core should use for
legacy cursor updates.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201222134002.161613-1-contact@emersion.fr
According to Hardware Reference Manual, OCTEON III
are mostly same as previous OCTEON models. So just
enable them and extend supported event code.
0x3e and 0x3f still reserved.
Signed-off-by: Jia Qingtong <jiaqingtong97@163.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When performing operations on all CAMERARX instances, code usually
iterates over all cal->phy[] entries and skips the NULL pointers. The
number of available CAMERARX instances is however available through
cal->data->num_csi2_phy. Use it instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The MAX_WIDTH_BYTES and MAX_HEIGHT_LINES macros have a generic name that
is prone to namespace clashes. Rename them with a CAL_ prefix. While at
it, expand their documentation and add CAL_MIN_(WIDTH|HEIGHT)_* macros
that will be used to implement CAMERARX subdev operations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The cal_formats array contain the description of all formats supported
by the hardware. It's currently used by the V4L2 video device operations
only, but will be needed by the CAMERARX subdev code too. Move it from
cal-video.c to cal.c and add helper functions to access it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The struct cal_ctx m_fmt field stores the media bus format for the
context input. Only the format 'field' field is used, store it in the
video format instead, and drop m_fmt.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Create and register V4L2 subdevs for the CAMERARX instances, and link
them in the media graph to the sensors and video nodes. The subdev API
is not exposed to userspace at this point, and no subdev operation is
implemented, but the media controller graph is visible to applications.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
cluster is required for cacheinfo to set shared_cpu_map correctly.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Victim Cache is defined by Loongson as per-core unified
private Cache.
Add this into cacheinfo and make cache levels selfincrement
instead of hardcode levels.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
.cprestore is removed as we don't expect Position Independent
zboot ELF.
.noreorder is also removed and rest instructions are massaged
to improve readability.
t9 register is used for indirect jump as MIPS ABI requirement.
start label is removed as it already defined in LEAF.
Reported-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In the current code, we can not build under !CONFIG_NUMA and !CONFIG_SMP
on the Loongson64 platform, it seems bad for the users who just want to
use pure single core (not nosmp) to debug, so do the following things to
give them a chance:
(1) Do not select NUMA and SMP for MACH_LOONGSON64 in Kconfig, make NUMA
depends on SMP, and then just set them in the loongson3_defconfig.
(2) Move szmem() from numa.c to init.c and add prom_init_memory() under
!CONFIG_NUMA.
(3) Clean up szmem() due to the statements of case SYSTEM_RAM_LOW and
SYSTEM_RAM_HIGH are the same.
(4) Remove the useless declaration of prom_init_memory() and add the
declaration of szmem() in loongson.h to avoid build error.
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There is a race condition where if the /sys/class/rc0/uevent file is read
before rc_dev->registered is set to true, -ENODEV will be returned.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1901089
Cc: stable@vger.kernel.org
Fixes: a2e2d73fa2 ("media: rc: do not access device via sysfs after rc_unregister_device()")
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The Beacon EmbeddedWorks development kits supporting i.MX8M Mini
and Nano have an WM8962 audio CODEC installed. Add modules for both
CONFIG_SND_SOC_WM8962 and CONFIG_SND_SOC_FSL_ASOC_CARD to enable them.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Beacon Embeddedworks is launching a development kit based on the
i.MX8M Nano SoC. The kit consists of a System on Module (SOM)
+ baseboard. The SOM has the SoC, eMMC, and Ethernet. The baseboard
has an wm8962 audio CODEC, a PDM microphone, and a single USB OTG.
The baseboard is capable of two different, mutually exclusive video
outputs, so the common items are in the baseboard file. When
the video becomes available, LVDS output will be added to this kit
file, and a second kit file will be added to support HDMI.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Microblaze is the only architecture that selects TRACING_SUPPORT.
In my understanding, it is computed by kernel/trace/Kconfig:
config TRACING_SUPPORT
bool
depends on TRACE_IRQFLAGS_SUPPORT
depends on STACKTRACE_SUPPORT
default y
Microblaze enables both TRACE_IRQFLAGS_SUPPORT and STACKTRACE_SUPPORT,
so there is no change in the resulted configuration.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20201223152947.698744-1-masahiroy@kernel.org
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Use three-way comparison for address components to avoid integer
wraparound in the result of xfrm_policy_addr_delta(). This ensures
that the search trees are built and traversed correctly.
Treat IPv4 and IPv6 similarly by returning 0 when prefixlen == 0.
Prefix /0 has only one equivalence class.
Fixes: 9cf545ebd5 ("xfrm: policy: store inexact policies in a tree ordered by destination address")
Signed-off-by: Visa Hankala <visa@hankala.org>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When running this xfrm_policy.sh test script, even with some cases
marked as FAIL, the overall test result will still be PASS:
$ sudo ./xfrm_policy.sh
PASS: policy before exception matches
FAIL: expected ping to .254 to fail (exceptions)
PASS: direct policy matches (exceptions)
PASS: policy matches (exceptions)
FAIL: expected ping to .254 to fail (exceptions and block policies)
PASS: direct policy matches (exceptions and block policies)
PASS: policy matches (exceptions and block policies)
FAIL: expected ping to .254 to fail (exceptions and block policies after hresh changes)
PASS: direct policy matches (exceptions and block policies after hresh changes)
PASS: policy matches (exceptions and block policies after hresh changes)
FAIL: expected ping to .254 to fail (exceptions and block policies after hthresh change in ns3)
PASS: direct policy matches (exceptions and block policies after hthresh change in ns3)
PASS: policy matches (exceptions and block policies after hthresh change in ns3)
FAIL: expected ping to .254 to fail (exceptions and block policies after htresh change to normal)
PASS: direct policy matches (exceptions and block policies after htresh change to normal)
PASS: policy matches (exceptions and block policies after htresh change to normal)
PASS: policies with repeated htresh change
$ echo $?
0
This is because the $lret in check_xfrm() is not a local variable.
Therefore when a test failed in check_exceptions(), the non-zero $lret
will later get reset to 0 when the next test calls check_xfrm().
With this fix, the final return value will be 1. Make it easier for
testers to spot this failure.
Fixes: 39aa6928d4 ("xfrm: policy: fix netlink/pf_key policy lookups")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>