Add nominal error handling that tears down CXL.mem in response to error
notifications that imply a device reset. Given some CXL.mem may be
operating as System RAM, there is a high likelihood that these error
events are fatal. However, if the system survives the notification the
expectation is that the driver behavior is equivalent to a hot-unplug
and re-plug of an endpoint.
Note that this does not change the mask values from the default. That
awaits CXL _OSC support to determine whether platform firmware is in
control of the mask registers.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166974413966.1608150.15522782911404473932.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add tracepoint events for recording the CXL uncorrectable and correctable
errors. For uncorrectable errors, there is additional data of 512B from
the header log register (CXL spec rev3 8.2.4.16.7). The trace event will
intake a dynamic array that will dump the entire Header Log data. If
multiple errors are set in the status register, then the
'first error' field (CXL spec rev3 v8.2.4.16.6) is read from the Error
Capabilities and Control Register in order to determine the error.
This implementation does not include CXL IDE Error details.
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/166974413388.1608150.5875712482260436188.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The RAS Capability Structure has some ancillary information that may be
relevant with respect to AER events, link and protcol error status
registers. Map the RAS Capability Registers in support of defining a
'struct pci_error_handlers' instance for the cxl_pci driver.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166974412803.1608150.7096566580400947001.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The RAS Capabilitiy Structure is a CXL Component register capability
block. Unlike the HDM Decoder Capability, it will be referenced by the
cxl_pci driver in response to PCIe AER events. Due to this it is no
longer the case that cxl_map_component_regs() can assume that it should
map all component registers. Plumb a bitmask of capability ids to map
through cxl_map_component_regs().
For symmetry cxl_probe_device_regs() is updated to populate @id in
'struct cxl_reg_map' even though cxl_map_device_regs() does not have a
need to map a subset of the device registers per caller.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166974412214.1608150.11487843455070795378.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Update the port driver to use cxl_map_component_registers() so that the
component register block can be shared between the cxl_pci driver and
the cxl_port driver. I.e. stop the port driver from reserving the entire
component register block for itself via request_region() when it only
needs the HDM Decoder Capability subset.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166974411625.1608150.7149373371599960307.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The component registers are currently unused by the cxl_pci driver.
Only the physical address base of the component registers is conveyed to
the cxl_mem driver. Just call cxl_map_device_registers() directly.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166974410443.1608150.15855499736133349600.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Rather then duplicating the setting of valid, length, and offset for
each type, just convey a pointer to the register map to common code.
Yes, the change in cxl_probe_component_regs() does not save
any lines of code, but it is preparation for adding another component
register type to map (RAS Capability Structure).
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166974409293.1608150.17661353937678581423.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
With the removal of the pktcdvd driver, there are no in-kernel users of
the devnode callback in struct block_device_operations, so it can be
safely removed. If it is needed for new block drivers in the future, it
can be brought back.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221203140747.1942969-1-gregkh@linuxfoundation.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
collect_cpu_info() is used to collect the current microcode revision and
processor flags on every CPU.
It had a weird mechanism to try to mimick a "once" functionality in the
sense that, that information should be issued only when it is differing
from the previous CPU.
However (1):
the new calling sequence started doing that in parallel:
microcode_init()
|-> schedule_on_each_cpu(setup_online_cpu)
|-> collect_cpu_info()
resulting in multiple redundant prints:
microcode: sig=0x50654, pf=0x80, revision=0x2006e05
microcode: sig=0x50654, pf=0x80, revision=0x2006e05
microcode: sig=0x50654, pf=0x80, revision=0x2006e05
However (2):
dumping this here is not that important because the kernel does not
support mixed silicon steppings microcode. Finally!
Besides, there is already a pr_info() in microcode_reload_late() that
shows both the old and new revisions.
What is more, the CPU signature (sig=0x50654) and Processor Flags
(pf=0x80) above aren't that useful to the end user, they are available
via /proc/cpuinfo and they don't change anyway.
Remove the redundant pr_info().
[ bp: Heavily massage. ]
Fixes: b6f86689d5 ("x86/microcode: Rip out the subsys interface gunk")
Reported-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20221103175901.164783-2-ashok.raj@intel.com
The current links of LoongArch ISA Vol1 and ELF psABI are invalid,
the latest versions are 1.02 and 2.00 respectively, let us update
the links.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1669892345-7763-3-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The current links of LoongArch ISA Vol1 and ELF psABI are invalid,
the latest versions are 1.02 and 2.00 respectively, let us update
the links.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1669892345-7763-2-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Document the test_num member of struct ifs_data.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/lkml/774fd22a-aaee-758d-8195-77bac783ecbc@infradead.org/
Detailed description for this pull request:
- Replace irqchip mask_invert with unmask_base
to remove deprecated mask_invert flag for extcon-max77843.c
- Convert to i2c's .probe_new style for extcon-fsa9480,
extcon-rt8973 and extcon-usbc-uusb320.c
-----BEGIN PGP SIGNATURE-----
iQJKBAABCgA0FiEEsSpuqBtbWtRe4rLGnM3fLN7rz1MFAmOK59UWHGN3MDAuY2hv
aUBzYW1zdW5nLmNvbQAKCRCczd8s3uvPU60DEAC5QG5OevfT1y6M9sKV/L9Yifq3
w269BGL5huptiLHUsvTJPsUMWIaq8haEEAyQWJqA2wetTuQXluYPy9QZlnmHV8n1
uxXB9Hsd8tKnXpSsXSrv5Cr/AY7HPUqKy3kFdbeyB2dYPYK1mVI1SpislaJob4It
AVTa8Vdju17KCIbzKdEIPzaRe+I8riuEpR8YqitiwH65lofXr+hEULJ8XJ5ZEzcg
15YRzjE1AxO67+xw3S6+cUnCteaYEBSxEKFxlPZvOC+kcqHDoET3t4sLJDhizmA8
yevEDhvDhRFkai7GqUVV1G+ib6DMFJmqlgcVcGtZmbvhmv7Ki2CkJzpc5eptmfbe
6LGoRb/0rVll+31Hdp2n0//wOT6T+31aUvOw2cUIWV4sS+G87MAOV4ENgg3U8w4Z
a6wYAPaJeP1yl3bgWNMD4ompU8R69TUZR17vZWSQ41J1NcmXJrMiwKj9GoNsibhm
W4eOYaJxFTiFWw12qHd7re9W2WdsG8qRZnRUtJ7w09mKM5Di8iEJNvYxfPQXt0BD
3fVb8biKlPu38B+ow9pSv+7D0L75c92q+OM3/e2Hsa/I65G02+BrgiM/XRZHnvvh
/MvbQT+UbYLqehZj2CiWnIH73UOYd/Y3ComBbszuThxrsG1hCmK7hEebZMY++nSL
iJb/4P2S+vxAr18sWw==
=Uxxc
-----END PGP SIGNATURE-----
Merge tag 'extcon-next-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon next for v6.2
Detailed description for this pull request:
- Replace irqchip mask_invert with unmask_base
to remove deprecated mask_invert flag for extcon-max77843.c
- Convert to i2c's .probe_new style for extcon-fsa9480,
extcon-rt8973 and extcon-usbc-uusb320.c
* tag 'extcon-next-for-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: usbc-tusb320: Convert to i2c's .probe_new()
extcon: rt8973: Convert to i2c's .probe_new()
extcon: fsa9480: Convert to i2c's .probe_new()
extcon: max77843: Replace irqchip mask_invert with unmask_base
Make pins-are-numbered optional and deprecate it
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221129023401.278780-4-bero@baylibre.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Remove the check for the unnecessary pins-are-numbered Devicetree property.
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20221129023401.278780-2-bero@baylibre.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
A downstream port must be connected to a component register block.
For restricted hosts the base address is determined from the RCRB. The
RCRB is provided by the host's CEDT CHBS entry. Rework CEDT parser to
get the RCRB and add code to extract the component register block from
it.
RCRB's BAR[0..1] point to the component block containing CXL subsystem
component registers. MEMBAR extraction follows the PCI base spec here,
esp. 64 bit extraction and memory range alignment (6.0, 7.5.1.2.1). The
RCRB base address is cached in the cxl_dport per-host bridge so that the
upstream port component registers can be retrieved later by an RCD
(RCIEP) associated with the host bridge.
Note: Right now the component register block is used for HDM decoder
capability only which is optional for RCDs. If unsupported by the RCD,
the HDM init will fail. It is future work to bypass it in this case.
Co-developed-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/Y4dsGZ24aJlxSfI1@rric.localdomain
[djbw: introduce devm_cxl_add_rch_dport()]
Link: https://lore.kernel.org/r/166993044524.1882361.2539922887413208807.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A "DPA invalidation event" is any scenario where the contents of a DPA
(Device Physical Address) is modified in a way that is incoherent with
CPU caches, or if the HPA (Host Physical Address) to DPA association
changes due to a remapping event.
PMEM security events like Unlock and Passphrase Secure Erase already
manage caches through LIBNVDIMM, so that leaves HPA to DPA remap events
that need cache management by the CXL core. Those only happen when the
boot time CXL configuration has changed. That event occurs when
userspace attaches an endpoint decoder to a region configuration, and
that region is subsequently activated.
The implications of not invalidating caches between remap events is that
reads from the region at different points in time may return different
results due to stale cached data from the previous HPA to DPA mapping.
Without a guarantee that the region contents after cxl_region_probe()
are written before being read (a layering-violation assumption that
cxl_region_probe() can not make) the CXL subsystem needs to ensure that
reads that precede writes see consistent results.
A CONFIG_CXL_REGION_INVALIDATION_TEST option is added to support debug
and unit testing of the CXL implementation in QEMU or other environments
where cpu_cache_has_invalidate_memregion() returns false. This may prove
too restrictive for QEMU where the HDM decoders are emulated, but in
that case the CXL subsystem needs some new mechanism / indication that
the HDM decoder is emulated and not a passthrough of real hardware.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166993222098.1995348.16604163596374520890.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Now that cpu_cache_invalidate_memregion() is generically available, use
it to centralize CPU cache management in the nvdimm region driver.
This trades off removing redundant per-dimm CPU cache flushing with an
opportunistic flush on every region disable event to cover the case of
sensitive dirty data in the cache being written back to media after a
secure erase / overwrite event.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166993221550.1995348.16843505129579060258.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Preclude the possibility of user tooling sending device secrets in the
clear into the kernel by marking the security commands as exclusive.
This mandates the usage of the keyctl ABI for managing the device
passphrase.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/166993221008.1995348.11651567302609703175.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
cxl_region_probe() allows for regions not in the 'commit' state to be
enabled. Fail probe when the region is not committed otherwise the
kernel may indicate that an address range is active when none of the
decoders are active.
Fixes: 8d48817df6 ("cxl/region: Add region driver boiler plate")
Cc: <stable@vger.kernel.org>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/166993220462.1995348.1698008475198427361.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A port of a CXL host bridge links to the bridge's ACPI device
(&adev->dev) with its corresponding uport/dport device (uport_dev and
dport_dev respectively). The device is not a direct parent device in
the PCI topology as pdev->dev.parent points to a PCI bridge's (struct
pci_host_bridge) device. The following CXL memory device hierarchy
would be valid for an endpoint once an RCD EP would be enabled (note
this will be done in a later patch):
VH mode:
cxlmd->dev.parent->parent
^^^\^^^^^^\ ^^^^^^\
\ \ pci_dev (Type 1, Downstream Port)
\ pci_dev (Type 0, PCI Express Endpoint)
cxl mem device
RCD mode:
cxlmd->dev.parent->parent
^^^\^^^^^^\ ^^^^^^\
\ \ pci_host_bridge
\ pci_dev (Type 0, RCiEP)
cxl mem device
In VH mode a downstream port is created by port enumeration and thus
always exists.
Now, in RCD mode the host bridge also already exists but it references
to an ACPI device. A port lookup by the PCI device's parent device
will fail as a direct link to the registered port is missing. The ACPI
device of the bridge must be determined first.
To prevent this, change port registration of a CXL host to use the
bridge device instead. Do this also for the VH case as port topology
will better reflect the PCI topology then.
Signed-off-by: Robert Richter <rrichter@amd.com>
[djbw: rebase on brige mocking]
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166993043978.1882361.16238060349889579369.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Accept any cxl_test topology device as the first argument in
cxl_chbs_context.
This is in preparation for reworking the detection of the component
registers across VH and RCH topologies. Move
mock_acpi_table_parse_cedt() beneath the definition of is_mock_port()
and use is_mock_port() instead of the explicit mock cxl_acpi device
check.
Acked-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166993043433.1882361.17651413716599606118.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Now that cxl_nvdimm and cxl_pmem_region objects are torn down
sychronously with the removal of either the bridge, or an endpoint, the
cxl_pmem_wq infrastructure can be jettisoned.
Tested-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/166993042335.1882361.17022872468068436287.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The three objects 'struct cxl_nvdimm_bridge', 'struct cxl_nvdimm', and
'struct cxl_pmem_region' manage CXL persistent memory resources. The
bridge represents base platform resources, the nvdimm represents one or
more endpoints, and the region is a collection of nvdimms that
contribute to an assembled address range.
Their relationship is such that a region is torn down if any component
endpoints are removed. All regions and endpoints are torn down if the
foundational bridge device goes down.
A workqueue was deployed to manage these interdependencies, but it is
difficult to reason about, and fragile. A recent attempt to take the CXL
root device lock in the cxl_mem driver was reported by lockdep as
colliding with the flush_work() in the cxl_pmem flows.
Instead of the workqueue, arrange for all pmem/nvdimm devices to be torn
down immediately and hierarchically. A similar change is made to both
the 'cxl_nvdimm' and 'cxl_pmem_region' objects. For bisect-ability both
changes are made in the same patch which unfortunately makes the patch
bigger than desired.
Arrange for cxl_memdev and cxl_region to register a cxl_nvdimm and
cxl_pmem_region as a devres release action of the bridge device.
Additionally, include a devres release action of the cxl_memdev or
cxl_region device that triggers the bridge's release action if an endpoint
exits before the bridge. I.e. this allows either unplugging the bridge,
or unplugging and endpoint to result in the same cleanup actions.
To keep the patch smaller the cleanup of the now defunct workqueue
infrastructure is saved for a follow-on patch.
Tested-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/166993041773.1882361.16444301376147207609.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Now that a cxl_nvdimm object can only experience ->remove() via an
unregistration event (because the cxl_nvdimm bind attributes are
suppressed), additional cleanups are possible.
It is already the case that the removal of a cxl_memdev object triggers
->remove() on any associated region. With that mechanism in place there
is no need for the cxl_nvdimm removal to trigger the same. Just rely on
cxl_region_detach() to tear down the whole cxl_pmem_region.
Tested-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/166993041215.1882361.6321535567798911286.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Remove use of the deprecated mask_invert flag. Inverted mask
registers (where a '1' bit enables an IRQ) can be described more
directly as an unmask register.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this using "grep -E" instead.
sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests/net`
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
tar xf grep-3.8.tar.gz
cd grep-3.8 && ./configure && make
sudo make install
export PATH=/usr/local/bin:$PATH
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1669864248-829-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When testing in kci_test_ipsec_offload, srcip is configured as $dstip,
it should add xfrm policy rule in instead of out.
The test result of this patch is as follows:
PASS: ipsec_offload
Fixes: 2766a11161 ("selftests: rtnetlink: add ipsec offload API test")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20221201082246.14131-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit d2825fa936 ("crypto: sm3,sm4 - move into crypto directory") moves
SM3 and SM4 algorithm implementations from stand-alone library to crypto
API. The corresponding configuration options for the API version (generic)
are CONFIG_CRYPTO_SM3_GENERIC and CONFIG_CRYPTO_SM4_GENERIC, respectively.
Replace option selected in selftests configuration from the library version
to the API version.
Fixes: d2825fa936 ("crypto: sm3,sm4 - move into crypto directory")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221201131852.38501-1-tianjia.zhang@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Return NULL if we got unexpected value from skb_trim_rcsum() in
sja1110_rcv_inband_control_extension()
Fixes: 4913b8ebf8 ("net: dsa: add support for the SJA1110 native tagging protocol")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221201140032.26746-3-artem.chernyshev@red-soft.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Return NULL if we got unexpected value from skb_trim_rcsum()
in hellcreek_rcv()
Fixes: 01ef09caad ("net: dsa: Add tag handling for Hirschmann Hellcreek switches")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20221201140032.26746-2-artem.chernyshev@red-soft.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Return NULL if we got unexpected value from skb_trim_rcsum()
in ksz_common_rcv()
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: bafe9ba7d9 ("net: dsa: ksz: Factor out common tag code")
Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221201140032.26746-1-artem.chernyshev@red-soft.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
kfree_rcu(1-arg) should be avoided as much as possible,
since this is only possible from sleepable contexts,
and incurr extra rcu barriers.
I wish the 1-arg variant of kfree_rcu() would
get a distinct name, like kfree_rcu_slow()
to avoid it being abused.
Fixes: 459837b522 ("net/tcp: Disable TCP-MD5 static key on tcp_md5sig_info destruction")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20221202052847.2623997-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Third set of patches for v6.2. mt76 has a new driver for mt7996 Wi-Fi 7
devices and iwlwifi also got initial Wi-Fi 7 support. Otherwise
smaller features and fixes.
Major changes:
ath10k
* store WLAN firmware version in SMEM image table
mt76
* mt7996: new driver for MediaTek Wi-Fi 7 (802.11be) devices
* mt7986, mt7915: enable Wireless Ethernet Dispatch (WED) offload support
* mt7915: add ack signal support
* mt7915: enable coredump support
* mt7921: remain_on_channel support
* mt7921: channel context support
iwlwifi
* enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
* 320 MHz channels support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmOKcMARHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZv3cgf+KjlbxtCZvEIfK+jsd2/VK635ucUdC1d5
QZB5SCHyVCqTMEsBBw0WCmFdfnqQRQUE9Qe5s0hlwhyrjLP4FQ6/jGTarFvRV43E
xO8jJd7e4mnVVoQySeKIRfvtYPFKT5GpaDVs4ytfdSs+KYoCE7akMBcvHVO8Fr2M
MepdqyoJakhRybFUJZMts8W8IsBikv9hdnb2Mr/E32JFLeP6ggs9tKCZKBbpxyXk
BzfYkDMXffFl95prlmy4rXP223FjvgUuRNWaatseR7S6A/Ik9Xk3B1qv3mtocPZF
LiTlFtmn3qkgyX5bfm6NRe/2FqgRUYfIrN0XtVw6Sy8WUe1GCf3opA==
=pkqE
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.2
Third set of patches for v6.2. mt76 has a new driver for mt7996 Wi-Fi 7
devices and iwlwifi also got initial Wi-Fi 7 support. Otherwise
smaller features and fixes.
Major changes:
ath10k
- store WLAN firmware version in SMEM image table
mt76
- mt7996: new driver for MediaTek Wi-Fi 7 (802.11be) devices
- mt7986, mt7915: enable Wireless Ethernet Dispatch (WED) offload support
- mt7915: add ack signal support
- mt7915: enable coredump support
- mt7921: remain_on_channel support
- mt7921: channel context support
iwlwifi
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
- 320 MHz channels support
* tag 'wireless-next-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (144 commits)
wifi: ath10k: fix QCOM_SMEM dependency
wifi: mt76: mt7921e: add pci .shutdown() support
wifi: mt76: mt7915: mmio: fix naming convention
wifi: mt76: mt7996: add support to configure spatial reuse parameter set
wifi: mt76: mt7996: enable ack signal support
wifi: mt76: mt7996: enable use_cts_prot support
wifi: mt76: mt7915: rely on band_idx of mt76_phy
wifi: mt76: mt7915: enable per bandwidth power limit support
wifi: mt76: mt7915: introduce mt7915_get_power_bound()
mt76: mt7915: Fix PCI device refcount leak in mt7915_pci_init_hif2()
wifi: mt76: do not send firmware FW_FEATURE_NON_DL region
wifi: mt76: mt7921: Add missing __packed annotation of struct mt7921_clc
wifi: mt76: fix coverity overrun-call in mt76_get_txpower()
wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices
wifi: mt76: mt76x0: remove dead code in mt76x0_phy_get_target_power
wifi: mt76: mt7915: fix band_idx usage
wifi: mt76: mt7915: enable .sta_set_txpwr support
wifi: mt76: mt7915: add basedband Txpower info into debugfs
wifi: mt76: mt7915: add support to configure spatial reuse parameter set
wifi: mt76: mt7915: add missing MODULE_PARM_DESC
...
====================
Link: https://lore.kernel.org/r/20221202214254.D0D3DC433C1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix regressions with CSR controller clones
- Fix support for Read Local Supported Codecs V2
- Fix overflow on L2CAP code
- Fix missing hci_dev_put on ISO and L2CAP code
-----BEGIN PGP SIGNATURE-----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=Cpsz
-----END PGP SIGNATURE-----
Merge tag 'for-net-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix regressions with CSR controller clones
- Fix support for Read Local Supported Codecs V2
- Fix overflow on L2CAP code
- Fix missing hci_dev_put on ISO and L2CAP code
* tag 'for-net-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: Fix crash when replugging CSR fake controllers
Bluetooth: Fix not cleanup led when bt_init fails
Bluetooth: Fix support for Read Local Supported Codecs V2
Bluetooth: Remove codec id field in vendor codec definition
Bluetooth: L2CAP: Fix u8 overflow
Bluetooth: silence a dmesg error message in hci_request.c
Bluetooth: hci_conn: add missing hci_dev_put() in iso_listen_bis()
Bluetooth: 6LoWPAN: add missing hci_dev_put() in get_l2cap_conn()
Bluetooth: btusb: Add debug message for CSR controllers
Bluetooth: btusb: Fix CSR clones again by re-adding ERR_DATA_REPORTING quirk
====================
Link: https://lore.kernel.org/r/20221202213726.2801581-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are 2 races surrounding the usb-notifier:
1. The notifier, and thus usb_work, may run before the bq->charger
power_supply class device is registered. But usb_work may call
power_supply_changed() which relies on the psy device being registered.
2. usb_work may be pending/running at remove() time, so it needs to be
cancelled on remove after unregistering the usb-notifier.
Fix 1. by moving usb-notifier registration to after the power_supply
registration.
Fix 2. by adding a cancel_work_sync() call directly after the usb-notifier
unregistration.
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The pump_express_work which gets queued from an external_power_changed
callback might be pending / running on remove() (or on probe failure).
Add a devm action cancelling the work, to ensure that it is cancelled.
Note the devm action is added before devm_power_supply_register(), making
it run after devm unregisters the power_supply, so that the work cannot
be queued anymore (this is also why a devm action is used for this).
Fixes: 48f45b094d ("power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol")
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
