The interrupt controller can detect only link changes. So in case an
external device generated a level based interrupt, then the interrupt
controller detected correctly the first edge. But the problem was that
the interrupt controller was detecting also the edge when the interrupt
was cleared. So it would generate another interrupt.
The fix for this is to clear the second interrupt but still check the
interrupt line status.
Fixes: c297561bc9 ("pinctrl: ocelot: Fix interrupt controller")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Tested-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20221018070959.1322606-1-horatiu.vultur@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Winbond uses 3 bytes to identify flash: vendor_id, dev_id_0, dev_id_1,
but current driver uses only first 2 bytes of it for devices
identification. As result Winbond W25N02KV flash (id_bytes: EF, AA, 22)
is identified as W25N01GV (id_bytes: EF, AA, 21).
Fix this by adding missed identification bytes.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221010105110.446674-1-mikhail.kshevetskiy@iopsys.eu
NO_IRQ is used to check the return of irq_of_parse_and_map().
On some architecture NO_IRQ is 0, on other architectures it is -1.
irq_of_parse_and_map() returns 0 on error, independent of NO_IRQ.
So use 0 instead of using NO_IRQ.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/4e3ca3e0077ea124ea210c312e6e620f0f9e8bca.1665034065.git.christophe.leroy@csgroup.eu
Commit fbc00b5e74 ("dt-bindings: nand: meson: convert txt to yaml")
converts amlogic,meson-nand.txt to yaml, but misses to adjust its reference
in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Repair this file reference in MESON NAND CONTROLLER DRIVER FOR AMLOGIC
SOCS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220929123431.23180-1-lukas.bulwahn@gmail.com
Originally the absence of the marvell,nand-keep-config property caused
the setup_data_interface function to be provided. However when
setup_data_interface was moved into nand_controller_ops the logic was
unintentionally inverted. Update the logic so that only if the
marvell,nand-keep-config property is present the bootloader NAND config
kept.
Cc: stable@vger.kernel.org
Fixes: 7a08dbaedd ("mtd: rawnand: Move ->setup_data_interface() to nand_controller_ops")
Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220927024728.28447-1-chris.packham@alliedtelesis.co.nz
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.
Cc: stable@vger.kernel.org
Fixes: d7d9f8ec77 ("mtd: rawnand: add NVIDIA Tegra NAND Flash controller driver")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220926084456.98160-1-zhangqilong3@huawei.com
Follow the advice of the Documentation/filesystems/sysfs.rst
and show() should only use sysfs_emit() or sysfs_emit_at()
when formatting the value to be returned to user space.
Signed-off-by: Xuezhi Zhang <zhangxuezhi1@coolpad.com>
Signed-off-by: Helge Deller <deller@gmx.de>
The 'chip_np' returned by of_get_next_child() with refcount decremented,
of_node_put() need be called in error path to decrease the refcount.
Fixes: bfc618fcc3 ("mtd: rawnand: intel: Read the chip-select line from the correct OF node")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220924131010.957117-1-yangyingliang@huawei.com
Follow the advice of the Documentation/filesystems/sysfs.rst
and show() should only use sysfs_emit() or sysfs_emit_at()
when formatting the value to be returned to user space.
Signed-off-by: Xuezhi Zhang <zhangxuezhi1@coolpad.com>
Signed-off-by: Helge Deller <deller@gmx.de>
When the text console is scrolling text upwards it calls the fillrect()
function to empty the new line. The current implementation doesn't seem
to work correctly on HCRX cards in 32-bit mode and leave garbage in that
line instead. Fix it by falling back to standard cfb_fillrect() in that
case.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Even in the presence of problems (here: regulator_disable() might fail),
it's important to unregister all resources acquired during .probe() and
disable the device (i.e. DMA activity) because even if .remove() returns
an error code, the device is removed and the .remove() callback is never
called again later to catch up.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 611097d5da ("fbdev: da8xx: add support for a regulator")
When we call connect() for a UDP socket in a reuseport group, we have
to update sk->sk_reuseport_cb->has_conns to 1. Otherwise, the kernel
could select a unconnected socket wrongly for packets sent to the
connected socket.
However, the current way to set has_conns is illegal and possible to
trigger that problem. reuseport_has_conns() changes has_conns under
rcu_read_lock(), which upgrades the RCU reader to the updater. Then,
it must do the update under the updater's lock, reuseport_lock, but
it doesn't for now.
For this reason, there is a race below where we fail to set has_conns
resulting in the wrong socket selection. To avoid the race, let's split
the reader and updater with proper locking.
cpu1 cpu2
+----+ +----+
__ip[46]_datagram_connect() reuseport_grow()
. .
|- reuseport_has_conns(sk, true) |- more_reuse = __reuseport_alloc(more_socks_size)
| . |
| |- rcu_read_lock()
| |- reuse = rcu_dereference(sk->sk_reuseport_cb)
| |
| | | /* reuse->has_conns == 0 here */
| | |- more_reuse->has_conns = reuse->has_conns
| |- reuse->has_conns = 1 | /* more_reuse->has_conns SHOULD BE 1 HERE */
| | |
| | |- rcu_assign_pointer(reuse->socks[i]->sk_reuseport_cb,
| | | more_reuse)
| `- rcu_read_unlock() `- kfree_rcu(reuse, rcu)
|
|- sk->sk_state = TCP_ESTABLISHED
Note the likely(reuse) in reuseport_has_conns_set() is always true,
but we put the test there for ease of review. [0]
For the record, usually, sk_reuseport_cb is changed under lock_sock().
The only exception is reuseport_grow() & TCP reqsk migration case.
1) shutdown() TCP listener, which is moved into the latter part of
reuse->socks[] to migrate reqsk.
2) New listen() overflows reuse->socks[] and call reuseport_grow().
3) reuse->max_socks overflows u16 with the new listener.
4) reuseport_grow() pops the old shutdown()ed listener from the array
and update its sk->sk_reuseport_cb as NULL without lock_sock().
shutdown()ed TCP sk->sk_reuseport_cb can be changed without lock_sock(),
but, reuseport_has_conns_set() is called only for UDP under lock_sock(),
so likely(reuse) never be false in reuseport_has_conns_set().
[0]: https://lore.kernel.org/netdev/CANn89iLja=eQHbsM_Ta2sQF0tOGU8vAGrh_izRuuHjuO1ouUag@mail.gmail.com/
Fixes: acdcecc612 ("udp: correct reuseport selection with connected sockets")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20221014182625.89913-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Intel SPI-NOR controller does not support the 4-byte address opcode
so ->set_4byte_addr_mode() ends up returning -ENOTSUPP and the SPI flash
chip probe fail like this:
[ 12.291082] spi-nor: probe of spi0.0 failed with error -524
Whereas previously before commit 08412e72af ("mtd: spi-nor: core:
Return error code from set_4byte_addr_mode()") it worked just fine.
Fix this by ignoring -ENOTSUPP in spi_nor_init().
Fixes: 08412e72af ("mtd: spi-nor: core: Return error code from set_4byte_addr_mode()")
Cc: stable@vger.kernel.org
Reported-by: Hongyu Ning <hongyu.ning@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Acked-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220923093441.3178-1-mika.westerberg@linux.intel.com
Underlying fs doesn't remove privs because fallocate is called with
privileged mounter credentials.
This fixes some failure in fstests generic/683..687.
Fixes: aab8848cee ("ovl: add ovl_fallocate()")
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Underlying fs doesn't remove privs because copy_range/remap_range are
called with privileged mounter credentials.
This fixes some failures in fstest generic/673.
Fixes: 8ede205541 ("ovl: add reflink/copyfile/dedup support")
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Currently setgid stripping in file_remove_privs()'s should_remove_suid()
helper is inconsistent with other parts of the vfs. Specifically, it only
raises ATTR_KILL_SGID if the inode is S_ISGID and S_IXGRP but not if the
inode isn't in the caller's groups and the caller isn't privileged over the
inode although we require this already in setattr_prepare() and
setattr_copy() and so all filesystem implement this requirement implicitly
because they have to use setattr_{prepare,copy}() anyway.
But the inconsistency shows up in setgid stripping bugs for overlayfs in
xfstests (e.g., generic/673, generic/683, generic/685, generic/686,
generic/687). For example, we test whether suid and setgid stripping works
correctly when performing various write-like operations as an unprivileged
user (fallocate, reflink, write, etc.):
echo "Test 1 - qa_user, non-exec file $verb"
setup_testfile
chmod a+rws $junk_file
commit_and_check "$qa_user" "$verb" 64k 64k
The test basically creates a file with 6666 permissions. While the file has
the S_ISUID and S_ISGID bits set it does not have the S_IXGRP set. On a
regular filesystem like xfs what will happen is:
sys_fallocate()
-> vfs_fallocate()
-> xfs_file_fallocate()
-> file_modified()
-> __file_remove_privs()
-> dentry_needs_remove_privs()
-> should_remove_suid()
-> __remove_privs()
newattrs.ia_valid = ATTR_FORCE | kill;
-> notify_change()
-> setattr_copy()
In should_remove_suid() we can see that ATTR_KILL_SUID is raised
unconditionally because the file in the test has S_ISUID set.
But we also see that ATTR_KILL_SGID won't be set because while the file
is S_ISGID it is not S_IXGRP (see above) which is a condition for
ATTR_KILL_SGID being raised.
So by the time we call notify_change() we have attr->ia_valid set to
ATTR_KILL_SUID | ATTR_FORCE. Now notify_change() sees that
ATTR_KILL_SUID is set and does:
ia_valid = attr->ia_valid |= ATTR_MODE
attr->ia_mode = (inode->i_mode & ~S_ISUID);
which means that when we call setattr_copy() later we will definitely
update inode->i_mode. Note that attr->ia_mode still contains S_ISGID.
Now we call into the filesystem's ->setattr() inode operation which will
end up calling setattr_copy(). Since ATTR_MODE is set we will hit:
if (ia_valid & ATTR_MODE) {
umode_t mode = attr->ia_mode;
vfsgid_t vfsgid = i_gid_into_vfsgid(mnt_userns, inode);
if (!vfsgid_in_group_p(vfsgid) &&
!capable_wrt_inode_uidgid(mnt_userns, inode, CAP_FSETID))
mode &= ~S_ISGID;
inode->i_mode = mode;
}
and since the caller in the test is neither capable nor in the group of the
inode the S_ISGID bit is stripped.
But assume the file isn't suid then ATTR_KILL_SUID won't be raised which
has the consequence that neither the setgid nor the suid bits are stripped
even though it should be stripped because the inode isn't in the caller's
groups and the caller isn't privileged over the inode.
If overlayfs is in the mix things become a bit more complicated and the bug
shows up more clearly. When e.g., ovl_setattr() is hit from
ovl_fallocate()'s call to file_remove_privs() then ATTR_KILL_SUID and
ATTR_KILL_SGID might be raised but because the check in notify_change() is
questioning the ATTR_KILL_SGID flag again by requiring S_IXGRP for it to be
stripped the S_ISGID bit isn't removed even though it should be stripped:
sys_fallocate()
-> vfs_fallocate()
-> ovl_fallocate()
-> file_remove_privs()
-> dentry_needs_remove_privs()
-> should_remove_suid()
-> __remove_privs()
newattrs.ia_valid = ATTR_FORCE | kill;
-> notify_change()
-> ovl_setattr()
// TAKE ON MOUNTER'S CREDS
-> ovl_do_notify_change()
-> notify_change()
// GIVE UP MOUNTER'S CREDS
// TAKE ON MOUNTER'S CREDS
-> vfs_fallocate()
-> xfs_file_fallocate()
-> file_modified()
-> __file_remove_privs()
-> dentry_needs_remove_privs()
-> should_remove_suid()
-> __remove_privs()
newattrs.ia_valid = attr_force | kill;
-> notify_change()
The fix for all of this is to make file_remove_privs()'s
should_remove_suid() helper to perform the same checks as we already
require in setattr_prepare() and setattr_copy() and have notify_change()
not pointlessly requiring S_IXGRP again. It doesn't make any sense in the
first place because the caller must calculate the flags via
should_remove_suid() anyway which would raise ATTR_KILL_SGID.
While we're at it we move should_remove_suid() from inode.c to attr.c
where it belongs with the rest of the iattr helpers. Especially since it
returns ATTR_KILL_S{G,U}ID flags. We also rename it to
setattr_should_drop_suidgid() to better reflect that it indicates both
setuid and setgid bit removal and also that it returns attr flags.
Running xfstests with this doesn't report any regressions. We should really
try and use consistent checks.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
The current setgid stripping logic during write and ownership change
operations is inconsistent and strewn over multiple places. In order to
consolidate it and make more consistent we'll add a new helper
setattr_should_drop_sgid(). The function retains the old behavior where
we remove the S_ISGID bit unconditionally when S_IXGRP is set but also
when it isn't set and the caller is neither in the group of the inode
nor privileged over the inode.
We will use this helper both in write operation permission removal such
as file_remove_privs() as well as in ownership change operations.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Move the helper from inode.c to attr.c. This keeps the the core of the
set{g,u}id stripping logic in one place when we add follow-up changes.
It is the better place anyway, since should_remove_suid() returns
ATTR_KILL_S{G,U}ID flags.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
In setattr_{copy,prepare}() we need to perform the same permission
checks to determine whether we need to drop the setgid bit or not.
Instead of open-coding it twice add a simple helper the encapsulates the
logic. We will reuse this helpers to make dropping the setgid bit during
write operations more consistent in a follow up patch.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
This reverts commit 133ad0d9af.
On systems with older PMUFW (Xilinx ZynqMP Platform Management Firmware)
using these pinctrl properties can cause system hang because there is
missing feature autodetection.
When this feature is implemented, support for these two properties should
bring back.
Cc: stable@vger.kernel.org
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20221017130303.21746-3-sai.krishna.potthuri@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This reverts commit ad2bea79ef.
On systems with older PMUFW (Xilinx ZynqMP Platform Management Firmware)
using these pinctrl properties can cause system hang because there is
missing feature autodetection.
When this feature is implemented in the PMUFW, support for these two
properties should bring back.
Cc: stable@vger.kernel.org
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20221017130303.21746-2-sai.krishna.potthuri@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
On R-Car V4H, all PLLs except PLL5 support Spread Spectrum and/or
Fractional Multiplication to reduce electromagnetic interference.
Add the SASYNCPER and SASYNCPERD[124] clocks, which are used as clock
sources for modules that must not be affected by Spread Spectrum and/or
Fractional Multiplication.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/d0f35c35e1f96c5a649ab477e7ba5d8025957cd0.1665147497.git.geert+renesas@glider.be
Clean up the code by making use of the newly introduced
ata_port_is_frozen() helper function.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
At the request of the libata maintainer, introduce a ata_port_is_frozen()
helper function.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
This patch introduces a driver for the ChromeOS human presence
sensor (aka. HPS). The driver supports a sensor connected to the I2C bus
and identified as "GOOG0020" in the ACPI tables.
When loaded, the driver exports the sensor to userspace through a
character device. This device only supports power management, i.e.,
communication with the sensor must be done through regular I2C
transmissions from userspace.
Power management is implemented by enabling the respective power GPIO
while at least one userspace process holds an open fd on the character
device. By default, the device is powered down if there are no active
clients.
Note that the driver makes no effort to preserve the state of the sensor
between power down and power up events. Userspace is responsible for
reinitializing any needed state once power has been restored.
The device firmware, I2C protocol and other documentation is available
at https://chromium.googlesource.com/chromiumos/platform/hps-firmware.
Co-developed-by: Sami Kyöstilä <skyostil@chromium.org>
Signed-off-by: Sami Kyöstilä <skyostil@chromium.org>
Signed-off-by: Dan Callaghan <dcallagh@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20221018040623.2173441-1-dcallagh@chromium.org
The SAS address comparison of asd_sas_port and expander phy is open
coded. Replace it with sas_phy_match_port_addr().
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-9-yanaijie@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SAS address comparison of expander phys is open coded. Replace it with
sas_phy_addr_match().
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-8-yanaijie@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SAS address comparison of domain device and expander phy is open
coded. Replace it with sas_phy_match_dev_addr().
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-7-yanaijie@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The attached phy finding is open coded. Replace it with
sas_find_attached_phy_id(). To keep things consistent, the return value of
hisi_sas_dev_found() is also changed to -ENODEV after calling
sas_find_attathed_phy_id() failed.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-6-yanaijie@huawei.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The attached phy finding is open coded. Replace it with
sas_find_attached_phy_id(). To keep things consistent, the return value of
mvs_dev_found_notify() is also changed to -ENODEV after calling
sas_find_attathed_phy_id() failed.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-5-yanaijie@huawei.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The attached phy id finding is open coded. Replace it with
sas_find_attached_phy_id(). To keep things consistent, the return value of
pm8001_dev_found_notify() is also changed to -ENODEV after calling
sas_find_attathed_phy_id() failed.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-4-yanaijie@huawei.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
LLDDs are all implementing their own attached phy ID finding code. Factor
it out to libsas.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-3-yanaijie@huawei.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
SAS address comparison is widely used in libsas. However they are all
opencoded and to avoid the line spill over 80 columns, are mostly split
into multi-lines. Introduce some helpers to prepare for some refactoring.
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Link: https://lore.kernel.org/r/20220928070130.3657183-2-yanaijie@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All upstream scsi_device_put() calls happen from thread context. Hence
simplify scsi_device_put() by always calling the release function
synchronously. This commit prepares for constifying the SCSI host template
by removing an assignment that clears the module pointer in the SCSI host
template.
scsi_device_dev_release_usercontext() was introduced in 2006 via
commit 65110b2168 ("[SCSI] fix wrong context bugs in SCSI").
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-9-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi_device_get() may be called from atomic context, e.g. by
shost_for_each_device(). A later commit will allow put_device() to sleep
for SCSI devices. Hence remove the put_device() call from
scsi_device_get().
According to Rusty Russell's "Module Refcount and Stuff mini-FAQ", calling
module_put() from atomic context is allowed since considerable time. See
also https://lkml.org/lkml/2002/11/18/330.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-8-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Simplify the code for incrementing the SCSI device reference count in
ufshcd_set_dev_pwr_mode(). This commit removes one scsi_device_put() call
that happens from atomic context.
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-7-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Use __starget_for_each_device() instead of open-coding
starget_for_each_device(). Run the queues asynchronously instead of
synchronously.
This commit removes code that calls scsi_device_put() from atomic context.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Instead of using scsi_host_template members to track the SCSI proc
directory entries, track these entries in a list. This changes the time
needed for looking up the proc dir pointer from O(1) into O(n). This is
considered acceptable since the number of SCSI host adapter types per host
is usually small (less than ten).
This change has been tested by attaching two USB storage devices to a qemu
host:
$ grep -aH . /proc/scsi/usb-storage/*
/proc/scsi/usb-storage/7: Host scsi7: usb-storage
/proc/scsi/usb-storage/7: Vendor: QEMU
/proc/scsi/usb-storage/7: Product: QEMU USB HARDDRIVE
/proc/scsi/usb-storage/7:Serial Number: 1-0000:00:02.1:00.0-6
/proc/scsi/usb-storage/7: Protocol: Transparent SCSI
/proc/scsi/usb-storage/7: Transport: Bulk
/proc/scsi/usb-storage/7: Quirks: SANE_SENSE
/proc/scsi/usb-storage/8: Host scsi8: usb-storage
/proc/scsi/usb-storage/8: Vendor: QEMU
/proc/scsi/usb-storage/8: Product: QEMU USB HARDDRIVE
/proc/scsi/usb-storage/8:Serial Number: 1-0000:00:02.1:00.0-7
/proc/scsi/usb-storage/8: Protocol: Transparent SCSI
/proc/scsi/usb-storage/8: Transport: Bulk
/proc/scsi/usb-storage/8: Quirks: SANE_SENSE
This commit prepares for constifying most SCSI host templates.
Reviewed-by: John Garry <john.garry@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Users expect that the contents of /proc/scsi is in sync with the contents
of /sys/class/scsi_host. Hence fail host creation if creating the proc
directory fails.
Suggested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for removing the 'proc_dir' and 'present' members from the SCSI
host template. This commit does not change any functionality.
Reviewed-by: John Garry <john.garry@huawei.com>
Cc: Bradley Grove <linuxdrivers@attotech.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prepare for removing the 'proc_dir' and 'present' members from the SCSI
host template by implicitly initializing 'present' and 'emulated' in
'driver_template'.
Reviewed-by: John Garry <john.garry@huawei.com>
Cc: Bradley Grove <linuxdrivers@attotech.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221015002418.30955-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the MDSS, MDP and DSI nodes that are found on msm8953 SoC.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221016161554.673006-4-luca@z3ntu.xyz
