Support for Samsung Galaxy E5, E7 and Grand Max is added, with support
for both 32-bit and 64-bit variants. The Samsung Galaxy S4 Mini Value
Edition gains magnetometer support.
MSM8996-based Xiaomi devices gains descriptions of the LPG-based LEDs.
On SA8295P ADP problems arising from regulators being switched into
low-power mode is worked around by removing this ability, for now.
The onboard USB Hub on SC7180 Trogdor is finally described and a few ADC
related updates are introduced.
On SC7280 support for the CPU and LLC bwmon instances are introduced.
Soundwire, audio codecs and sound introduced for a variety of boards.
Using required-opps the USB controllers votes for a minimum corner on
VDD_CX.
The onboard USB Hub Herobrine is described. A new board, the Google
Evoker is added, as is another revision of Herobrine Villager.
On SC8280XP the USB controllers are marked as wakeup-sources, to keep
them powered during suspend. The CRD has HID devices marked as
wakeup-sources to enable resuming the system. In addition to these
changes the alternative touchpad is introduced on the Lenovo ThinkPad
X13s.
SDM845 gains RPMh stats support and the LLCC BWMON is added. For SM6350
interconnect providers and GPI DMA is introduced. A description of the
PM7280b PMIC is added to Fairphone FP4 on SM7225.
With the multi-MSI support added in the PCIe controller, SM8250 gets all
its MSI interrupts added.
UFS ICE and the second SDHCI controller is introduced on SM8450. Support
for the Sony Xperia 1 IV is introduced.
Throughout a variety of platforms the TCSR mutex syscon is replaced with
the MMIO-based binding. TCSR nodes gained proper compatibles and halt
syscon nodes are split out from the mutex ranges.
A range of fixes to align with DT bindings are introduced. Among these
are the changes to the follow the TLMM binding and suffix pinctrl states
with -state and subnodes thereof with -pins, another is a number of
changes transitioning to use -gpios and introduction of proper parent
clock references in various clock providers.
-----BEGIN PGP SIGNATURE-----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=XT9N
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmMtxHsACgkQmmx57+YA
GNnDbw/7BIQIOXFkx6xb5dJbfxAs9EGlPngcgUGWHMUZ166Q+e+nGCUMiDtekLrC
E07g05dPO2oaS2XtcHYVQmaR+Sq9SQYb1nFE6P1kvHmz0SxueR8fDpUheFn4IunP
OCcyPoKGar72HcFh/v2r9SdJgVAEQ6bYvNzwJN2qqMQRW5fMHUBlJtcMumGNyg/0
MNzoSvmx/s2sL6yf6xVt7kqerl/7szFF13PnbWlUEnDhbZUHoOh5VYt2Xxpp9rjX
M09iM/mOkyms7ngcU9m+izYAg+aVeDBSynoyhqQUlrDwbFu83TQ+jFSp0MkJrSiQ
RHJSBNnXx9wmJuox/A2ZBUmMcjqaizz4ciXXVu5t7xP8wFKQZRfblCX1+B2G0qSu
1rqxBqGrVEzRanoZjpMCSrObSjD/t1wIpTN5hqvpEoR3nXWRFzLOIQjXyIkKVZ4p
ePc8Et1yYlQqv7S3GS12jLy8s/sKxOk0sTAzWuTavT+QrgJVDZScaSU9t9hhk4tC
HRlwHBag0nallJcz+gnmbG56f0zcVsvOHnMV+OBFA4wHInlVS+A+Rt0TouqjEiAo
IlVCXlO24jgsZi/x6ZwVboIBYzPLsaOmsr5Tg9Dua494/U+Im23qCFBvRGHiEoBe
tAyCAsYSLNsOhgjxC/tFVOQJOmlw+moerBpZNcu2XMG/aXLHwMA=
=ZHbe
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DTS updates for 6.1
Support for Samsung Galaxy E5, E7 and Grand Max is added, with support
for both 32-bit and 64-bit variants. The Samsung Galaxy S4 Mini Value
Edition gains magnetometer support.
MSM8996-based Xiaomi devices gains descriptions of the LPG-based LEDs.
On SA8295P ADP problems arising from regulators being switched into
low-power mode is worked around by removing this ability, for now.
The onboard USB Hub on SC7180 Trogdor is finally described and a few ADC
related updates are introduced.
On SC7280 support for the CPU and LLC bwmon instances are introduced.
Soundwire, audio codecs and sound introduced for a variety of boards.
Using required-opps the USB controllers votes for a minimum corner on
VDD_CX.
The onboard USB Hub Herobrine is described. A new board, the Google
Evoker is added, as is another revision of Herobrine Villager.
On SC8280XP the USB controllers are marked as wakeup-sources, to keep
them powered during suspend. The CRD has HID devices marked as
wakeup-sources to enable resuming the system. In addition to these
changes the alternative touchpad is introduced on the Lenovo ThinkPad
X13s.
SDM845 gains RPMh stats support and the LLCC BWMON is added. For SM6350
interconnect providers and GPI DMA is introduced. A description of the
PM7280b PMIC is added to Fairphone FP4 on SM7225.
With the multi-MSI support added in the PCIe controller, SM8250 gets all
its MSI interrupts added.
UFS ICE and the second SDHCI controller is introduced on SM8450. Support
for the Sony Xperia 1 IV is introduced.
Throughout a variety of platforms the TCSR mutex syscon is replaced with
the MMIO-based binding. TCSR nodes gained proper compatibles and halt
syscon nodes are split out from the mutex ranges.
A range of fixes to align with DT bindings are introduced. Among these
are the changes to the follow the TLMM binding and suffix pinctrl states
with -state and subnodes thereof with -pins, another is a number of
changes transitioning to use -gpios and introduction of proper parent
clock references in various clock providers.
* tag 'qcom-arm64-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (136 commits)
arm64: dts: qcom: sc7280: Add required-opps for USB
arm64: dts: qcom: sm8450: fix UFS PHY serdes size
arm64: dts: qcom: ipq8074: fix PCIe PHY serdes size
arm64: dts: qcom: sa8295p-adp: add missing gpio-ranges in PMIC GPIOs
arm64: dts: qcom: sa8295p-adp: add fallback compatible to PMIC GPIOs
arm64: dts: qcom: msm8996-xiaomi: align PMIC GPIO pin configuration with DT schema
arm64: dts: qcom: msm8994-msft-lumia-octagon: align resin node name with bindings
arm64: dts: qcom: pmi8994: add missing MPP compatible fallback
dt-bindings: pci: QCOM Add missing sc7280 aggre0, aggre1 clocks
arm64: dts: qcom: sc7280: Add missing aggre0, aggre1 clocks
arm64: dts: qcom: sc7280-villager: Adjust LTE SKUs
dt-bindings: arm: qcom: Adjust LTE SKUs for sc7280-villager
arm64: dts: qcom: sc7280-herobrine: Add nodes for onboard USB hub
arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
arm64: dts: qcom: align SDHCI reg-names with DT schema
arm64: dts: qcom: sm8250: provide additional MSI interrupts
arm64: dts: qcom: msm8996: add #clock-cells and XO clock to the HDMI PHY node
arm64: dts: qcom: Use WCD9335 DT bindings
arm64: dts: qcom: msm8994: switch TCSR mutex to MMIO
arm64: dts: qcom: ipq6018: switch TCSR mutex to MMIO
...
Link: https://lore.kernel.org/r/20220921234854.1343238-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds extends the IPQ8064 support with the two variants IPQ8062 and
IPQ8065. MSM8974 and APQ8084 gained RPM stats support.
The Audio DSP remoteproc was added to MSM8226 and enabled for ASUS
ZenWatch 2 and LG G Watch R.
MSM8660 gained one I2C and one SPI bus and the APQ8060 Dragonboard got
the TMA340 Touchscreen described.
A wide range of improvements are done throughout the DTS files to align
with bindings, fix issues and improve structure on things.
-----BEGIN PGP SIGNATURE-----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=W/0i
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=jPGF
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM DTS updates for 6.1
This adds extends the IPQ8064 support with the two variants IPQ8062 and
IPQ8065. MSM8974 and APQ8084 gained RPM stats support.
The Audio DSP remoteproc was added to MSM8226 and enabled for ASUS
ZenWatch 2 and LG G Watch R.
MSM8660 gained one I2C and one SPI bus and the APQ8060 Dragonboard got
the TMA340 Touchscreen described.
A wide range of improvements are done throughout the DTS files to align
with bindings, fix issues and improve structure on things.
* tag 'qcom-dts-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (35 commits)
ARM: dts: qcom: apq8026-lg-lenok: Enable ADSP
ARM: dts: qcom: apq8026-asus-sparrow: Enable ADSP
ARM: dts: qcom: msm8226: Add ADSP node
ARM: dts: qcom: ipq8064: pad addresses to 8 digit
ARM: dts: qcom: ipq8064: reorganize node order and sort them
ARM: dts: qcom: align SDHCI clocks with DT schema
ARM: dts: qcom: align SDHCI reg-names with DT schema
ARM: dts: qcom: msm8960: add clocks to the MMCC device node
ARM: dts: qcom: apq8064: add clocks to the MMCC device node
ARM: dts: qcom: msm8960: add clocks to the GCC device node
ARM: dts: qcom: apq8064: add clocks to the GCC device node
ARM: dts: qcom: msm8960: add clocks to the LCC device node
ARM: dts: qcom: apq8064: add clocks to the LCC device node
ARM: dts: qcom: msm8226: switch TCSR mutex to MMIO
ARM: dts: qcom: apq8084: switch TCSR mutex to MMIO
ARM: dts: qcom: msm8660: fix node names for fixed clocks
ARM: dts: qcom: msm8660: add pxo/cxo clocks to the GCC node
ARM: dts: qcom: apq8060-dragonboard: Add TMA340 to APQ8060 DragonBoard
ARM: dts: qcom: msm8660: Add GSBI3 I2C bus
ARM: dts: qcom: msm8660: Add GSBI1 SPI bus
...
Link: https://lore.kernel.org/r/20220921222619.1338380-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This reverts commit 211f276ed3.
For quite some time, core DRM helpers already ensure that any relevant
connectors/CRTCs/etc. are disabled, as well as their associated
components (e.g., bridges) when suspending the system. Thus,
analogix_dp_bridge_{enable,disable}() already get called, which in turn
call drm_panel_{prepare,unprepare}(). This makes these drm_panel_*()
calls redundant.
Besides redundancy, there are a few problems with this handling:
(1) drm_panel_{prepare,unprepare}() are *not* reference-counted APIs and
are not in general designed to be handled by multiple callers --
although some panel drivers have a coarse 'prepared' flag that mitigates
some damage, at least. So at a minimum this is redundant and confusing,
but in some cases, this could be actively harmful.
(2) The error-handling is a bit non-standard. We ignored errors in
suspend(), but handled errors in resume(). And recently, people noticed
that the clk handling is unbalanced in error paths, and getting *that*
right is not actually trivial, given the current way errors are mostly
ignored.
(3) In the particular way analogix_dp_{suspend,resume}() get used (e.g.,
in rockchip_dp_*(), as a late/early callback), we don't necessarily have
a proper PM relationship between the DP/bridge device and the panel
device. So while the DP bridge gets resumed, the panel's parent device
(e.g., platform_device) may still be suspended, and so any prepare()
calls may fail.
So remove the superfluous, possibly-harmful suspend()/resume() handling
of panel state.
Fixes: 211f276ed3 ("drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time")
Link: https://lore.kernel.org/all/Yv2CPBD3Picg%2FgVe@google.com/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220822180729.1.I8ac5abe3a4c1c6fd5c061686c6e883c22f69022c@changeid
- New board support: i.MX8DXL EVK, Kontron SL/BL i.MX8MM OSM-S, i.MX8MM
Gateworks GW7904, MSC SM2S-IMX8PLUS SoM and carrier board, NXP
LS2081ARDB.
- Update i.MX8MQ device tree to use generic name 'dma-controller' for
SDMA.
- A number of i.MX8ULP device tree improvements and updates: correct
parent clock of LPI2C & LPSPI, increase the clock speed of LPSPI, add
PMU and mailbox device, drop undocumented CGC property, enable FEC, etc.
- Add interconnect property for various i.MX8MP blk-ctrl devices.
- Enable VPU PGC, blk-ctrl and PCIe support for i.MX8MP SoC.
- A set of changes from Peng Fan to add various devices for i.MX93 SoC,
including MU, blk-ctrl, PMU, LPI2C, LPSPI, SRC, etc.
- Two set of changes to update LS1043A and LS1046A device trees on
various aspects, including USB3, PCIe, DMA, mdio-mux, QSPI Flash, etc.
- Board imx8mq-librem5 update: add USB role switching, add RGB PWM
notification LEDs, add voice coil motor for focus control, fix MIPI_CSI
description.
- A series from Frieder Schrempf to improve imx8mm-kontron device trees
for VSELECT switch, DDRC operating point, SPI NOR partition layout etc.
- A set of display and PMIC related additions and improvements on
imx8mm-verdin board.
- A number of i.MX8M Plus DHCOM PDK2 device tree improvments from Marek
Vasut.
- A few imx8mp-venice device tree updates on USB, cpufreq and WiFi/BT.
- A series from Vladimir Oltean to enable multiple switch CPU ports
support.
- Other small and random board specific updates.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmMm4WcUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM616ggApJ4zHHQQovmdWWYa6XH471LQGxZ4
HNw1Pui4imStowaPvyiRFcjr8wrQMGQ59NAQV4vVqX3p+xoeb/3ICO1h2cx8kosE
9YkBU0AqbgcFuiXRb4lOHqzy8D/ZGH1N/A8xASgUkTVSQDMCNyPucA7Xc5+EULDo
RmnicFCeF85j/mXy/IBVkXJwV/aH9RqF1HUwjYRAR/GE7yLCWMSwRfDhECCkjfqw
ypkTeYEkaubnZzFY1QWguOG9/x+TZ+VdMzOsRosfzFOowsC1SrurK5rm+DdVBoAJ
p5z7GumhY5kfFLBbScvtvR/HGF3YNyekHmaGm6xExhzZuhcy3fVLhsGRhg==
=sWBW
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=S7Rl
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree change for 6.1:
- New board support: i.MX8DXL EVK, Kontron SL/BL i.MX8MM OSM-S, i.MX8MM
Gateworks GW7904, MSC SM2S-IMX8PLUS SoM and carrier board, NXP
LS2081ARDB.
- Update i.MX8MQ device tree to use generic name 'dma-controller' for
SDMA.
- A number of i.MX8ULP device tree improvements and updates: correct
parent clock of LPI2C & LPSPI, increase the clock speed of LPSPI, add
PMU and mailbox device, drop undocumented CGC property, enable FEC, etc.
- Add interconnect property for various i.MX8MP blk-ctrl devices.
- Enable VPU PGC, blk-ctrl and PCIe support for i.MX8MP SoC.
- A set of changes from Peng Fan to add various devices for i.MX93 SoC,
including MU, blk-ctrl, PMU, LPI2C, LPSPI, SRC, etc.
- Two set of changes to update LS1043A and LS1046A device trees on
various aspects, including USB3, PCIe, DMA, mdio-mux, QSPI Flash, etc.
- Board imx8mq-librem5 update: add USB role switching, add RGB PWM
notification LEDs, add voice coil motor for focus control, fix MIPI_CSI
description.
- A series from Frieder Schrempf to improve imx8mm-kontron device trees
for VSELECT switch, DDRC operating point, SPI NOR partition layout etc.
- A set of display and PMIC related additions and improvements on
imx8mm-verdin board.
- A number of i.MX8M Plus DHCOM PDK2 device tree improvments from Marek
Vasut.
- A few imx8mp-venice device tree updates on USB, cpufreq and WiFi/BT.
- A series from Vladimir Oltean to enable multiple switch CPU ports
support.
- Other small and random board specific updates.
* tag 'imx-dt64-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (90 commits)
arm64: dts: ls1046a-qds: Modify the qspi flash frequency
arm64: dts: ls1046a-qds: add mmio based mdio-mux nodes for FPGA
arm64: dts: ls1046a: add gpios based i2c recovery information
arm64: dts: ls1046a: use a pseudo-bus to constrain usb and sata dma size
arm64: dts: ls1046a: make dma-coherent global to the SoC
arm64: dts: ls1046a: add missing dma ranges property
arm64: dts: ls1046a: Add big-endian property for PCIe nodes
arm64: dts: ls1046a: Add the PME interrupt and big-endian to PCIe EP nodes
arm64: dts: ls1046a: Enable usb3-lpm-capable for usb3 node
arm64: dts: ls1043a-rdb: add pcf85263 rtc node
arm64: dts: ls1043a-qds: add mmio based mdio-mux support
arm64: dts: ls1043a: use a pseudo-bus to constrain usb and sata dma size
arm64: dts: ls1043a: add gpio based i2c recovery information
arm64: dts: ls1043a: make dma-coherent global to the SoC
arm64: dts: ls1043a: add missing dma ranges property
arm64: dts: ls1043a: Add big-endian property for PCIe nodes
arm64: dts: ls1043a: Add SCFG phandle for PCIe nodes
arm64: dts: ls1043a: use pcie aer/pme interrupts
arm64: dts: ls1043a: Enable usb3-lpm-capable for usb3 node
arm64: dts: ls1043a: fix the wrong size of dcfg space
...
Link: https://lore.kernel.org/r/20220918092806.2152700-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmMtnygTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCtfkuQ2KDTXXOLCACFQGHCZrUGdWBw83UDA9r/lHuiIRuX
ELaSq1h9PJ2BC2+4t/4uDClJgvSYkxJkomNUVDDvbMK8gNTdVdIuHzaR12kerVWs
ArG/g0tjRE3ed5I3JWIOZ/ukfVmsVy/Rm/cwtqtWibJNSFtZuiodN1sYtS3Bv4i3
9sAdU6++LW/4OSAMss0+6VakC27/D5GJEZuEdYveqtf/TunrqNKGL2M5YmbenRoD
Bnx7FIiPHeL8pYz97W5ZEyGzZH90AuKOvHmx3+cHgZVHDzyBKd0UNLgisYFwXo9w
+9tfyZMZqzIZL2R0f3GVGPSvJGnLaX73bdgc8FAas/mY9WJze7plYWKt
=8zkH
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.1-20220923' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-09-23
The first 2 patches are by Ziyang Xuan and optimize registration and
the sending in the CAN BCM protocol a bit.
The next 8 patches target the gs_usb driver. 7 are by me and first fix
the time hardware stamping support (added during this net-next cycle),
rename a variable, convert the usb_control_msg + manual
kmalloc()/kfree() to usb_control_msg_{send,rev}(), clean up the error
handling and add switchable termination support. The patch by Rhett
Aultman and Vasanth Sadhasivan convert the driver from
usb_alloc_coherent()/usb_free_coherent() to kmalloc()/URB_FREE_BUFFER.
The last patch is by Shang XiaoJing and removes an unneeded call to
dev_err() from the ctucanfd driver.
* tag 'linux-can-next-for-6.1-20220923' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: ctucanfd: Remove redundant dev_err call
can: gs_usb: remove dma allocations
can: gs_usb: add switchable termination support
can: gs_usb: gs_make_candev(): clean up error handling
can: gs_usb: convert from usb_control_msg() to usb_control_msg_{send,recv}()
can: gs_usb: gs_cmd_reset(): rename variable holding struct gs_can pointer to dev
can: gs_usb: gs_can_open(): initialize time counter before starting device
can: gs_usb: add missing lock to protect struct timecounter::cycle_last
can: gs_usb: gs_usb_get_timestamp(): fix endpoint parameter for usb_control_msg_recv()
can: bcm: check the result of can_send() in bcm_can_tx()
can: bcm: registration process optimization in bcm_module_init()
====================
Link: https://lore.kernel.org/r/20220923120859.740577-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add per klp_object sysfs entry "patched". It makes it easier to debug
typos in the module name.
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Joe Lawrence <joe.lawrence@redhat.com>
[pmladek@suse.com: Updated kernel version when the sysfs file will be introduced]
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220902205208.3117798-2-song@kernel.org
Fix for a code analyser warning
-----BEGIN PGP SIGNATURE-----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=Z7gl
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-master-6.0-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
More pci fixes
Fix for a code analyser warning
The datasheet [1] explicit describes it as requirement for a reset.
[1] MT7531 Reference Manual for Development Board rev 1.0, page 735
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the PLL init of the switch out of the pad configuration of the port
6 (usally cpu port).
Fix a unidirectional 100 mbit limitation on 1 gbit or 2.5 gbit links for
outbound traffic on port 5 or port 6.
Fixes: c288575f78 ("net: dsa: mt7530: Add the support of MT7531 switch")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Antoine Tenart says:
====================
net: macsec: remove the preparation phase when offloading operations
It was reported[1] the 2-step phase offloading of MACsec operations did
not fit well and device drivers were mostly ignoring the first phase
(preparation). In addition the s/w fallback in case h/w rejected an
operation, which could have taken advantage of this design, never was
implemented and it's probably not a good idea anyway (at least
unconditionnally). So let's remove this logic which only makes the code
more complex for no advantage, before there are too many drivers
providing MACsec offloading.
This series removes the first phase (preparation) of the MACsec h/w
offloading. The modifications are split per-driver and in a way that
makes bissection working with logical steps; but I can squash some
patches if needed.
This was tested on the MSCC PHY but not on the Altantic nor mlx5e NICs.
[1] https://lore.kernel.org/all/166322893264.61080.12133865599607623050@kwain/T/
====================
Link: https://lore.kernel.org/r/20220921135118.968595-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the MACsec offloading preparation phase was removed from the
MACsec core implementation as well as from drivers implementing it, we
can safely remove the flag representing it.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove checks on the prepare phase as it is now unused by the MACsec
core implementation.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove checks on the prepare phase as it is now unused by the MACsec
core implementation.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove checks on the prepare phase as it is now unused by the MACsec
core implementation.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The hardware offloading in MACsec was initially supported using 2 phases.
This was proposed in the RFC as this could have allowed easier fallback
to the software implementation if the hardware did not support a feature
or had enough entries already. But this fallback wasn't implemented and
might not be a good idea after all. In addition it turned out this logic
didn't mapped well the hardware logic and device drivers were mostly
ignoring the preparation phase.
Let's remove this as it does not offer any advantage and is ignored by
drivers.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for removing the MACsec h/w offloading preparation phase,
make it a no-op in the Atlantic driver.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for removing the MACsec h/w offloading preparation phase,
make it a no-op in the MSCC phy driver.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- A series from Alexander Stein to add missing properties for i.MX6 SRAM.
- Drop 'interrupts' property when 'interrupts-extended' is present. This
fixes a dtbs_check warning with i.MX6 DT.
- Update device trees to use generic name 'dma-controller' for SDMA.
- A set of changes from Krzysztof Kozlowski to align SPI, LED and
gpio-keys node name with dtschema.
- A series of indentation and white-space cleanups from Marcel Ziswiler
to address various checkpatch warnings.
- Add DDR pinmux defines to VF610 DT header.
- A couple of changes from Peng Fan to update clock-names and add IPG
clock for i.MX7ULP LPI2C devices.
- Improve device tree structure for Kontron i.MX6UL/ULL based boards.
- A series of changes from Tim Harvey to add CAN regulator for Gateworks
i.MX6QDL boards.
- Various small and random board specific updates.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmMmkqkUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5jrAf+K3D9RtMWlGY1zrqv6QLWgBbeNaBt
wtICvLyaaypcPqZ/WzgfgMgJf9tUwDzkrzewyRqG4aHBQvY0xOlwvUFH/OA2C4mA
K0/FYR6GK4rIlZpOW1Rkj3K0U0GrtxUsF9uXLFhQShJWWVn+gpjZmcZ3hEVwRyIR
eNEKsMmwV0UZhT1JZYZ/U+sQD8yfaNPLLVM+doLwcavQavNGQyDRLdpAZ6AuMANz
SckcGC4tI3mkPsTBweshemSDe14XILrnDgei1429AfLd+vb48l9FPUF5/oOKJRt7
Zb1uQmXfCwyUJx7pU3tJZBUHAAGqsupniYtpxYxH8PL46lSulmSDpnMLyA==
=wloQ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=7v6C
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree change for 6.1
- A series from Alexander Stein to add missing properties for i.MX6 SRAM.
- Drop 'interrupts' property when 'interrupts-extended' is present. This
fixes a dtbs_check warning with i.MX6 DT.
- Update device trees to use generic name 'dma-controller' for SDMA.
- A set of changes from Krzysztof Kozlowski to align SPI, LED and
gpio-keys node name with dtschema.
- A series of indentation and white-space cleanups from Marcel Ziswiler
to address various checkpatch warnings.
- Add DDR pinmux defines to VF610 DT header.
- A couple of changes from Peng Fan to update clock-names and add IPG
clock for i.MX7ULP LPI2C devices.
- Improve device tree structure for Kontron i.MX6UL/ULL based boards.
- A series of changes from Tim Harvey to add CAN regulator for Gateworks
i.MX6QDL boards.
- Various small and random board specific updates.
* tag 'imx-dt-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (40 commits)
ARM: dts: imx6qdl-gw54xx: add CAN regulator
ARM: dts: imx6qdl-gw53xx: add CAN regulator
ARM: dts: imx6qdl-gw52xx: add CAN regulator
ARM: dts: imx: update sdma node name format
ARM: dts: imx6: skov: migrate to resistive-adc-touch
ARM: dts: imx6sx-udoo-neo: don't use multiple blank lines
ARM: dts: imx6sl: use tabs for code indent
ARM: dts: imx6sx: add missing properties for sram
ARM: dts: imx6sll: add missing properties for sram
ARM: dts: imx6sl: add missing properties for sram
ARM: dts: imx6qp: add missing properties for sram
ARM: dts: imx6dl: add missing properties for sram
ARM: dts: imx6q: add missing properties for sram
ARM: dts: imx7ulp: Add IPG clock for lpi2c
ARM: dts: imx7ulp: update the LPI2C clock-names
ARM: dts: vf610: ddr pinmux
ARM: dts: imx6qdl-dhcom: Move IPU iomux node from PDK2 to SoM file
ARM: dts: imx6ul-kontron: Add imx6ull-kontron-bl to Makefile
ARM: dts: imx6ul-kontron: Simplify devicetree structure
ARM: dts: vf610: align SPI node name with dtschema
...
Link: https://lore.kernel.org/r/20220918092806.2152700-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It can help debugging IPC timeout issues (like we do with IPC3) if we
dump the IPC and DSP information.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware register dump is IPC3 specific, it is not available for other
IPC versions.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of the IPC registers are different between IPC3 and IPC4.
The ipc_dump needs to use different prints depending on the used IPC
protocol.
The existing code was printing registers relevant for IPC3, which is not
even supported on MTL.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of the IPC registers are different between IPC3 and IPC4.
The ipc_dump needs to use different prints depending on the used IPC
protocol.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The use of the IPC registers are different between IPC3 and IPC4.
The ipc_dump needs to use different prints depending on the used IPC
protocol.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add max drive-strength for cif_clkout_m0. This fix the issue that
sometimes camera ov5695 is not probed correctly.
Tested on PX30_Mini_EVB_V11_20190507
Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Link: https://lore.kernel.org/r/20220620161321.1898840-2-tommaso.merciai@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The use of the IPC registers are different between IPC3 and IPC4.
The ipc_dump needs to use different prints depending on the used IPC
protocol.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220923133616.26267-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These changes enable PCI, Ethernet and HDA support on Jetson AGX Orin.
DMA support is enabled for I2C on a number of SoC generations and the
Google Pixel C (a.k.a. Smaug) device receives Bluetooth and Wi-Fi
support.
Other than that this also contains some minor cleanups and fixes.
-----BEGIN PGP SIGNATURE-----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=hMuy
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmMtuBAACgkQmmx57+YA
GNmaRxAAhAx+cHVY0rOROQ1bEFhu1C4GYrrcqwkgqsCFLNSU2OMMdSaD700J5RbO
j1ghhXR9jispWZIc6WyjscmClDHcwq/fMjqHfl2Cru243RXSO+LL3Ut/JiBLIBpd
Kj0/14XQzZc43PW3Jnz2SLMSU3recRt8ZMYnl3OxHzJPrXWedYKI2J6uSsPb32fG
n6svKejHaqiFFtsHQhjlqox370wSocArhqh238iUqncOTj23lycO3VZ1Rwk/h8G0
YdAGeeih0NGM2eah1ntYcdclpbILI9Nsme/xD4yCyxByVB5WqwLOkSqyppdRd2UY
KG1Z95UsaNGBZTc/1F7FUGNCUiv/zHys8KysnibhXQniAvoG/sz4E8bFpGSpa76o
hISOFb82q1PPDxUXIWq8deyrGtCZyUkgSEh0tNsuNafec2iOl0/ERvZyTD+6PKlT
xbmtZoT1Wf69s6hh08pzS5cO5FztHXudA754jIRZUFbRquDNoBNDZHa8APKpGxSI
e0+SS1kRgBHgrMXNOJH0UDQtkt1fdbDJWCHvXx1ki/1BjedyQZdkU75D5epEyTLn
F1XTcGbtF5WlgC0vQCL8SEhIA6nqotkZHRSfs0E0+9JadRsH9f9xWgLG+CqGsPzM
/FWS4UnijuiIj5r1lcm0xuLO524tGdGuDdAIBkymehZkpDF1Bjc=
=fOSZ
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.1-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v6.1-rc1
These changes enable PCI, Ethernet and HDA support on Jetson AGX Orin.
DMA support is enabled for I2C on a number of SoC generations and the
Google Pixel C (a.k.a. Smaug) device receives Bluetooth and Wi-Fi
support.
Other than that this also contains some minor cleanups and fixes.
* tag 'tegra-for-6.1-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add GPCDMA support for Tegra I2C
arm64: tegra: Add iommus for HDA on Tegra234
arm64: tegra: Enable HDA node for Jetson AGX Orin
arm64: tegra: Add context isolation domains on Tegra234
arm64: tegra: Fixup iommu-map property formatting
arm64: dts: tegra: smaug: Add Wi-Fi node
arm64: dts: tegra: smaug: Add Bluetooth node
arm64: tegra: Enable MGBE on Jetson AGX Orin Developer Kit
arm64: tegra: Add MGBE nodes on Tegra234
arm64: tegra: Fix up compatible for Tegra234 GPCDMA
arm64: tegra: Enable PCIe slots in P3737-0000 board
arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT
arm64: tegra: Add regulators required for PCIe
Link: https://lore.kernel.org/r/20220916101957.1635854-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Adds device tree bindings for the MGBE found on Tegra234 SoCs, as well
as stream IDs for the shared host1x context devices.
-----BEGIN PGP SIGNATURE-----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=fXO9
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=PY4Y
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.1-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v6.1-rc1
Adds device tree bindings for the MGBE found on Tegra234 SoCs, as well
as stream IDs for the shared host1x context devices.
* tag 'tegra-for-6.1-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: Add Host1x context stream IDs on Tegra234
dt-bindings: net: Add Tegra234 MGBE
Link: https://lore.kernel.org/r/20220916101957.1635854-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We introduced uaccess pointer masking for arm64 in commit:
4d8efc2d5e ("arm64: Use pointer masking to limit uaccess speculation")
Which was intended to prevent speculative uaccesses to kernel memory on
CPUs where access permissions were not respected under speculation.
At the time, the uaccess primitives were occasionally used to access
kernel memory, with the maximum permitted address held in
thread_info::addr_limit. Consequently, the address masking needed to
take this dynamic limit into account.
Subsequently the uaccess primitives were reworked such that they are
only used for user memory, and as of commit:
3d2403fd10 ("arm64: uaccess: remove set_fs()")
... the address limit was made a compile-time constant, but the logic
was otherwise unchanged.
Regardless of the configured VA size or whether TBI is in use, the
address space can be divided into three ranges:
* The TTBR0 VA range, for which any valid pointer has bit 55 *clear*,
and any non-tag bits [63-56] must match bit 55 (i.e. must be clear).
* The TTBR1 VA range, for which any valid pointer has bit 55 *set*, and
any non-tag bits [63-56] must match bit 55 (i.e. must be set).
* The gap between the TTBR0 and TTBR1 ranges, where bit 55 may be set or
clear, but any access will result in a fault.
As the uaccess primitives are now only used for user memory in the TTBR0
VA range, we can prevent generation of TTBR1 addresses by clearing bit
55, which will either result in a TTBR0 address or a faulting address
between the TTBR VA ranges.
This is beneficial for code generation as:
* We no longer clobber the condition codes.
* We no longer burn a register on (TASK_SIZE_MAX - 1).
* We no longer need to consume the untagged pointer.
When building a defconfig v6.0-rc3 with GCC 12.1.0, this change makes
the resulting Image 64KiB smaller.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220922151053.3520750-1-mark.rutland@arm.com
[catalin.marinas@arm.com: remove csdb() as the bit clearing is unconditional]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
It looks like this test has been accidentally dropped when resolving
conflicts in this Makefile.
Most probably because there were 3 different patches modifying this file
in parallel:
commit 152e8ec776 ("selftests/bonding: add a test for bonding lladdr target")
commit bbb774d921 ("net: Add tests for bonding and team address list management")
commit 2ffd57327f ("selftests: bonding: cause oops in bond_rr_gen_slave_id")
The first one was applied in 'net-next' while the two other ones were
recently applied in the 'net' tree.
But that's alright, easy to fix by re-adding the missing one!
Fixes: 0140a7168f ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20220923082306.2468081-1-matthieu.baerts@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
