SOF topologies hard-code the MCLK used for SSP connections. That was a
bad idea in hindsight, this information should really come from BIOS
and/or machine driver.
This patch introduces a helper to scan all SSP endpoints connected to
a codec, and all formats to see what MCLK is used. When BIT(0) of the
mdivc offset if set in the SSP blob, MCLK0 is used, and likewise when
BIT(1) is set MCLK1 is used.
The case where both MCLKs are used is possible but has never been seen
in practice so should be treated as an error by the caller.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220919115350.43104-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_pcm_runtime has playback/capture_widget for Codec2Coddec.
The naming is unclear.
This patch names it as c2c_widget and uses array.
struct snd_soc_pcm_runtime {
...
=> struct snd_soc_dapm_widget *playback_widget;
=> struct snd_soc_dapm_widget *capture_widget;
...
}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pmfqv9mk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_pcm_runtime has dpcm for Playback/Capture, but it is defined
directly "2". It should use defined number.
struct snd_soc_pcm_runtime {
...
=> struct snd_soc_dpcm_runtime dpcm[2];
...
}
This patch fixup it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r106v9mv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rtd has both dai_link pointer (A) and num_cpus/codecs (B).
(A) rtd->dai_link = dai_link;
(B) rtd->num_cpus = dai_link->num_cpus;
(B) rtd->num_codecs = dai_link->num_codecs;
But, we can get num_cpus/codecs (B) via dai_link (A).
This means we don't need to keep num_cpus/codecs on rtd.
This patch removes these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sfkmv9n3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Topre REALFORCE R2 firmware incorrectly reports that interface
descriptor number 1, input report descriptor 2's events are array events
rather than variable events. That particular report descriptor is used
to report keypresses when there are more than 6 keys held at a time.
This bug prevents events from this interface from being registered
properly, so only 6 keypresses (from a different interface) can be
registered at once, rather than full n-key rollover.
This commit fixes the bug by setting the correct value in a report_fixup
function.
The original bug report can be found here:
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/804
Thanks to Benjamin Tissoires for diagnosing the issue with the report
descriptor.
Signed-off-by: Harry Stern <harry@harrystern.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220911003614.297613-1-harry@harrystern.net
Fix the code for converting a SCSI command pointer into an SRP request
pointer.
Cc: Xiao Yang <yangx.jy@fujitsu.com>
Fixes: ad215aaea4 ("RDMA/srp: Make struct scsi_cmnd and struct srp_request adjacent")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220908233139.3042628-1-bvanassche@acm.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This fixes broken atomic checks which cause a race between the
release-timer and processing of hid input.
I noticed that contacts were sometimes sticking, even with the "sticky
fingers" quirk enabled. This fixes that problem.
Cc: stable@vger.kernel.org
Fixes: 9609827458 ("HID: multitouch: optimize the sticky fingers timer")
Signed-off-by: Andri Yngvason <andri@yngvason.is>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220907150159.2285460-1-andri@yngvason.is
This allows to export the type in BTF and so in the automatically
generated vmlinux.h. It will also add some static checks on the users
when we change the ll driver API (see not below).
Note that we need to also do change in the ll_driver API, but given
that this will have a wider impact outside of this tree, we leave this
as a TODO for the future.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220902132938.2409206-11-benjamin.tissoires@redhat.com
When we are dealing with eBPF, we need to have access to the report type.
Currently our implementation differs from the USB standard, making it
impossible for users to know the exact value besides hardcoding it
themselves.
And instead of a blank define, convert it as an enum.
Note that we need to also do change in the ll_driver API, but given
that this will have a wider impact outside of this tree, we leave this
as a TODO for the future.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220902132938.2409206-10-benjamin.tissoires@redhat.com
This unique identifier is currently used only for ensuring uniqueness in
sysfs. However, this could be handful for userspace to refer to a specific
hid_device by this id.
2 use cases are in my mind: LEDs (and their naming convention), and
HID-BPF.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220902132938.2409206-9-benjamin.tissoires@redhat.com
Andrea Mayer says:
====================
seg6: add NEXT-C-SID support for SRv6 End behavior
The Segment Routing (SR) architecture is based on loose source routing.
A list of instructions, called segments, can be added to the packet headers to
influence the forwarding and processing of the packets in an SR enabled
network.
In SRv6 (Segment Routing over IPv6 data plane) [1], the segment identifiers
(SIDs) are IPv6 addresses (128 bits) and the segment list (SID List) is carried
in the Segment Routing Header (SRH). A segment may correspond to a "behavior"
that is executed by a node when the packet is received.
The Linux kernel currently supports a large subset of the behaviors described
in [2] (e.g., End, End.X, End.T and so on).
Some SRv6 scenarios (i.e.: traffic-engineering, fast-rerouting, VPN, mobile
network backhaul, etc.) may require a large number of segments (i.e. up to 15).
Therefore, reducing the size of the SID List is useful to minimize the impact
on MTU (Maximum Transfer Unit) and to enable SRv6 on legacy hardware devices
with limited processing power that can suffer from long IPv6 headers.
Draft-ietf-spring-srv6-srh-compression [3] extends the SRv6 architecture by
providing different mechanisms for the efficient representation (i.e.
compression) of the SID List.
The NEXT-C-SID mechanism described in [3] offers the possibility of encoding
several SRv6 segments within a single 128 bit SID address. Such a SID address
is called a Compressed SID Container. In this way, the length of the SID List
can be drastically reduced. In some cases, the SRH can be omitted, as the IPv6
Destination Address can carry the whole Segment List, using its compressed
representation.
The NEXT-C-SID mechanism relies on the "flavors" framework defined in [2].
The flavors represent additional operations that can modify or extend a subset
of the existing behaviors.
In this patchset we extend the SRv6 Subsystem in order to support the
NEXT-C-SID mechanism.
In details the patchset is made of:
- patch 1/3: add netlink_ext_ack support in parsing SRv6 behavior attributes;
- patch 2/3: add NEXT-C-SID support for SRv6 End behavior;
- patch 3/3: add selftest for NEXT-C-SID in SRv6 End behavior.
The corresponding iproute2 patch for supporting the NEXT-C-SID in SRv6 End
behavior is provided in a separated patchset.
Comments, improvements and suggestions are always appreciated.
[1] - https://datatracker.ietf.org/doc/html/rfc8754
[2] - https://datatracker.ietf.org/doc/html/rfc8986
[3] - https://datatracker.ietf.org/doc/html/draft-ietf-spring-srv6-srh-compression
====================
Link: https://lore.kernel.org/r/20220912171619.16943-1-andrea.mayer@uniroma2.it
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This selftest is designed for testing the support of NEXT-C-SID flavor
for SRv6 End behavior. It instantiates a virtual network composed of
several nodes: hosts and SRv6 routers. Each node is realized using a
network namespace that is properly interconnected to others through veth
pairs.
The test considers SRv6 routers implementing IPv4/IPv6 L3 VPNs leveraged
by hosts for communicating with each other. Such routers i) apply
different SRv6 Policies to the traffic received from connected hosts,
considering the IPv4 or IPv6 protocols; ii) use the NEXT-C-SID
compression mechanism for encoding several SRv6 segments within a single
128-bit SID address, referred to as a Compressed SID (C-SID) container.
The NEXT-C-SID is provided as a "flavor" of the SRv6 End behavior,
enabling it to properly process the C-SID containers. The correct
execution of the enabled NEXT-C-SID SRv6 End behavior is verified
through reachability tests carried out between hosts belonging to the
same VPN.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The NEXT-C-SID mechanism described in [1] offers the possibility of
encoding several SRv6 segments within a single 128 bit SID address. Such
a SID address is called a Compressed SID (C-SID) container. In this way,
the length of the SID List can be drastically reduced.
A SID instantiated with the NEXT-C-SID flavor considers an IPv6 address
logically structured in three main blocks: i) Locator-Block; ii)
Locator-Node Function; iii) Argument.
C-SID container
+------------------------------------------------------------------+
| Locator-Block |Loc-Node| Argument |
| |Function| |
+------------------------------------------------------------------+
<--------- B -----------> <- NF -> <------------- A --------------->
(i) The Locator-Block can be any IPv6 prefix available to the provider;
(ii) The Locator-Node Function represents the node and the function to
be triggered when a packet is received on the node;
(iii) The Argument carries the remaining C-SIDs in the current C-SID
container.
The NEXT-C-SID mechanism relies on the "flavors" framework defined in
[2]. The flavors represent additional operations that can modify or
extend a subset of the existing behaviors.
This patch introduces the support for flavors in SRv6 End behavior
implementing the NEXT-C-SID one. An SRv6 End behavior with NEXT-C-SID
flavor works as an End behavior but it is capable of processing the
compressed SID List encoded in C-SID containers.
An SRv6 End behavior with NEXT-C-SID flavor can be configured to support
user-provided Locator-Block and Locator-Node Function lengths. In this
implementation, such lengths must be evenly divisible by 8 (i.e. must be
byte-aligned), otherwise the kernel informs the user about invalid
values with a meaningful error code and message through netlink_ext_ack.
If Locator-Block and/or Locator-Node Function lengths are not provided
by the user during configuration of an SRv6 End behavior instance with
NEXT-C-SID flavor, the kernel will choose their default values i.e.,
32-bit Locator-Block and 16-bit Locator-Node Function.
[1] - https://datatracker.ietf.org/doc/html/draft-ietf-spring-srv6-srh-compression
[2] - https://datatracker.ietf.org/doc/html/rfc8986
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
An SRv6 behavior instance can be set up using mandatory and/or optional
attributes.
In the setup phase, each supplied attribute is parsed and processed. If
the parsing operation fails, the creation of the behavior instance stops
and an error number/code is reported to the user. In many cases, it is
challenging for the user to figure out exactly what happened by relying
only on the error code.
For this reason, we add the support for netlink_ext_ack in parsing SRv6
behavior attributes. In this way, when an SRv6 behavior attribute is
parsed and an error occurs, the kernel can send a message to the
userspace describing the error through a meaningful text message in
addition to the classic error code.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hidpp->delayed_input can't be assigned to an object that already call
input_free_device when input_register_device fails.
Fixes: c39e3d5fc9 ("HID: logitech-hidpp: late bind the input device on wireless connection")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220812025515.19467-1-hbh25y@gmail.com
Currently ib_copy_from_udata and ib_copy_to_udata could underfill
the request and response buffer if the user-space passes an undersized
value for udata->inlen or udata->outlen respectively [1]
This could lead to undesirable behavior.
Zero initing the buffer only goes as far as preventing using the buffer
uninitialized.
Validate udata->inlen and udata->outlen passed from user-space to ensure
they are at least the required minimum size.
[1] https://lore.kernel.org/linux-rdma/MWHPR11MB0029F37D40D9D4A993F8F549E9D79@MWHPR11MB0029.namprd11.prod.outlook.com/
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20220907191324.1173-3-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
A number of asynchronous event (AE) ids were not aligned to the
correct flush_code and event_type. Fix these up so that the
correct IBV error and event codes are returned to application.
Also, add handling for new AE ids like IRDMA_AE_INVALID_REQUEST to
return the correct WC error code.
Fixes: 44d9e52977 ("RDMA/irdma: Implement device initialization definitions")
Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20220907191324.1173-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Francesco Dolcini says:
====================
Revert fec PTP changes
Revert the last 2 FEC PTP changes from Csókás Bence, they are causing multiple
issues and we are at 6.0-rc5.
====================
Link: https://lore.kernel.org/r/20220912070143.98153-1-francesco.dolcini@toradex.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rather than relying on a never-ending stream of patches for quirks.
This change will detect whether HID++ 1.0 hi-res scroll, HID++ 2.0
hi-res scroll or HID++ 2.0 hi-res scroll wheel is supported, and enable
the feature without the need for quirks.
Tested on a Logitech M705 mouse that was unsupported before this change.
[ 9.365324] logitech-hidpp-device 0003:046D:406D.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M705] on usb-0000:00:14.0-4/input2:3
[ 57.472434] logitech-hidpp-device 0003:046D:406D.0006: HID++ 4.5 device connected.
[ 57.616429] logitech-hidpp-device 0003:046D:406D.0006: Detected HID++ 2.0 hi-res scroll wheel
[ 57.712424] logitech-hidpp-device 0003:046D:406D.0006: wheel multiplier = 8
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216480
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Reviewed-by: Harry Cutts <hcutts@chromium.org>
Tested-by: Peter F. Patel-Schneider <pfpschneider@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220914132146.6435-1-hadess@hadess.net
Maximum frame length check is enabled in lan937x switch on POR, But it
is found to be disabled on driver during port setup operation. Due to
this, packets are not dropped when transmitted with greater than configured
value. For testing, setup made for lan1->lan2 transmission and configured
lan1 interface with a frame length (less than 1500 as mentioned in
documentation) and transmitted packets with greater than configured value.
Expected no packets at lan2 end, but packets observed at lan2.
Based on the documentation, packets should get discarded if the actual
packet length doesn't match the frame length configured. Frame length check
should be disabled only for cascaded ports due to tailtags.
This feature was disabled on ksz9477 series due to ptp issue, which is
not in lan937x series. But since lan937x took ksz9477 as base, frame
length check disabled here as well. Patch added to remove this portion
from port setup so that maximum frame length check will be active for
normal ports.
Fixes: 55ab6ffaf3 ("net: dsa: microchip: add DSA support for microchip LAN937x")
Signed-off-by: Rakesh Sankaranarayanan <rakesh.sankaranarayanan@microchip.com>
Link: https://lore.kernel.org/r/20220912051228.1306074-1-rakesh.sankaranarayanan@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Wire up the generic EFI zboot support for arm64.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Beginning of the merge window we introduced the vfs{g,u}id_t types in
b27c82e129 ("attr: port attribute changes to new types") and changed
various codepaths over including chown_common().
During that change we forgot to account for the case were the passed
ownership value is -1. In this case the ownership fields in struct iattr
aren't initialized but we rely on them being initialized by the time we
generate the ownership to pass down to the LSMs. All the major LSMs
don't care about the ownership values at all. Only Tomoyo uses them and
so it took a while for syzbot to unearth this issue.
Fix this by initializing the ownership fields and do it within the
retry_deleg block. While notify_change() doesn't alter the ownership
fields currently we shouldn't rely on it.
Since no kernel has been released with these changes this does not
needed to be backported to any stable kernels.
[Christian Brauner (Microsoft) <brauner@kernel.org>]
* rewrote commit message
* use INVALID_VFS{G,U}ID macros
Fixes: b27c82e129 ("attr: port attribute changes to new types") # mainline only
Reported-and-tested-by: syzbot+541e21dcc32c4046cba9@syzkaller.appspotmail.com
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
In the cited commit, the function ipv6_gro_receive was accidentally
changed to use skb_gro_header_slow, without attempting the fast path.
Fix it.
Fixes: 35ffb66547 ("net: gro: skb_gro_header helper function")
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Link: https://lore.kernel.org/r/20220911184835.GA105063@debian
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The MMC_SDHCI_OF_ASPEED is part of the Aspeed silicon so it makes
sense to depend on ARCH_ASPEED and for compile testing.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20220916115602.370003-1-pbrobinson@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Both of_device_id compatible strings and platform data were partially
ordered by name. Fix the ordering.
This commit brings no functional changes.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220915120923.86038-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Because the bit field size of the divider coefficient register is 1023, it is
limited before returning the value.
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Link: https://lore.kernel.org/r/20220914063702.20283-1-wenchao.chen666@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Clang warns:
drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:539:6: error: variable 'macsec_rule' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (err)
^~~
drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:598:9: note: uninitialized use occurs here
return macsec_rule;
^~~~~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:539:2: note: remove the 'if' if its condition is always false
if (err)
^~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:523:38: note: initialize the variable 'macsec_rule' to silence this warning
union mlx5e_macsec_rule *macsec_rule;
^
= NULL
drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:1131:6: error: variable 'macsec_rule' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (err)
^~~
drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:1215:9: note: uninitialized use occurs here
return macsec_rule;
^~~~~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:1131:2: note: remove the 'if' if its condition is always false
if (err)
^~~~~~~~
drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec_fs.c:1118:38: note: initialize the variable 'macsec_rule' to silence this warning
union mlx5e_macsec_rule *macsec_rule;
^
= NULL
2 errors generated.
If macsec_fs_{r,t}x_ft_get() fail, macsec_rule will be uninitialized.
Initialize it to NULL at the top of each function so that it cannot be
used uninitialized.
Fixes: e467b283ff ("net/mlx5e: Add MACsec TX steering rules")
Fixes: 3b20949cb2 ("net/mlx5e: Add MACsec RX steering rules")
Link: https://github.com/ClangBuiltLinux/linux/issues/1706
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/20220911085748.461033-1-nathan@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It seems that cy8c95x0_set_mux() missed serialization of IO access.
And its implementation looks half-baked. Add locking to the function.
Fixes: e6cbbe4294 ("pinctrl: Add Cypress cy8c95x0 support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220916205450.86278-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Replace the mutex_is_locked() stuff with lockdep_assert_held() since
that's what it's there for.
Also sprinkle these around so that we have more or less
mirrored coverage for the enable vs. disable instead of the
current situation where the asserts seem to be more or less
randomly thrown around.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220620182917.10765-2-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
In the probe path, dev_err() can be replace with dev_err_probe()
which will check if error code is -EPROBE_DEFER and and prints the
error name.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220917122208.1894769-1-yangyingliang@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In the probe path, dev_err() can be replace with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220917122015.1893880-1-yangyingliang@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Kconfig symbol depended on MMU but was dropped by the commit
acad3fe650 ("drm/hisilicon: Removed the dependency on the mmu")
because it already had as a dependency ARM64 that already selects MMU.
But later, commit a0f25a6bb3 ("drm/hisilicon/hibmc: Allow to be built
if COMPILE_TEST is enabled") allowed the driver to be built for non-ARM64
when COMPILE_TEST is set but that could lead to unmet direct dependencies
and linking errors.
Prevent a kconfig warning when MMU is not enabled by making
DRM_HISI_HIBMC depend on MMU.
WARNING: unmet direct dependencies detected for DRM_TTM
Depends on [n]: HAS_IOMEM [=y] && DRM [=m] && MMU [=n]
Selected by [m]:
- DRM_TTM_HELPER [=m] && HAS_IOMEM [=y] && DRM [=m]
- DRM_HISI_HIBMC [=m] && HAS_IOMEM [=y] && DRM [=m] && PCI [=y] && (ARM64 || COMPILE_TEST [=y])
Fixes: acad3fe650 ("drm/hisilicon: Removed the dependency on the mmu")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Xinliang Liu <xinliang.liu@linaro.org>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: John Stultz <jstultz@google.com>
Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com>
Cc: Chen Feng <puck.chen@hisilicon.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220531025557.29593-1-rdunlap@infradead.org
A while ago we introduced a dedicated vfs{g,u}id_t type in commit
1e5267cd08 ("mnt_idmapping: add vfs{g,u}id_t"). We already switched
over a good part of the VFS. Ultimately we will remove all legacy
idmapped mount helpers that operate only on k{g,u}id_t in favor of the
new type safe helpers that operate on vfs{g,u}id_t.
Cc: Seth Forshee (Digital Ocean) <sforshee@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL terminated strings.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220919030401.211331-1-chi.minghao@zte.com.cn
The previous hardware design embedds a internal divider for base clock.
New design not has that divider, so check the nxp,no-divider property,
if true, directly use base clock input, otherwise divide by 3 as before.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220902111207.2902493-3-peng.fan@oss.nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The base clock input to system counter is internally divided by 3 in
previous design, but there is change that no divider now. So add
a property to indicate that.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220902111207.2902493-2-peng.fan@oss.nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
We can simplify the code a bit by getting the clock in probe, and using
devm_clk_get(). This will also make further changes easier as the clock
is available in probe instead of prepare.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-10-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Let's make it clear that some features need to be tested currently on
omap1. Only omap1 still uses platform_data.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-9-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
There is no longer any need to expose the elements of struct omap_dm_timer
outside the driver. The pwm and remoteproc drivers just use struct
omap_dm_timer as a cookie.
Let's move the elements of struct omap_dm_timer into struct dmtimer that
is private to the driver. To do this, we mostly rename omap_dm_timer to
dmtimer in the driver. We keep omap_dm_timer only for the exposed
functions in the platform_data for the pwm and remoteproc drivers.
Let's also add a note about not using the exposed functions internally as
those will get deprecated eventually in favor of Linux generic frameworks.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-8-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Use pm_runtime_resume_and_get() and check for a possible error returned.
We want to do this as omap_dm_timer_enable() and omap_dm_timer_disable()
are exposed to the pwm and remoteproc drivers, and in the following patch
we turn struct omap_dm_timer into a cookie used by the exposed functions
only.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Link: https://lore.kernel.org/r/20220815131250.34603-7-tony@atomide.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
