It contains:
- fixes for self-refresh on SAMA7G5 while in AT91 power management modes:
one disabling a DDR PHY controller DLL which has been proved to be buggy
and can introduce glitches that can cause unexpected behavior; one
fixing the DDR PHY recalibration which cannot work for all possible
cases (due to hardware bug) while using backup and self-refresh AT91
power management mode;
- one defconfig fix to remove CONFIG_MICROCHIP_PIT64B from all AT91
defconfigs;
- multiple device tree fixes for regulators to avoid having some of them
enabled all the time and to describe min and max output ranges
according to board capabilities.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCYxG/lwAKCRCejrg/N2X7
/bQpAQCEfcz8ockiRHT3dkJcoI0yHbEiZIHSbPjwFLlu54IVBgEAjZPhSIbtYTjM
7MDRFXYF6BeaNga99JXjItz1IlwkvA8=
=5Kwl
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmMRzOAACgkQmmx57+YA
GNkVsxAArs1HJ4R8p2H54szlzrLGkgPrXuAIZNnV13jiRi5FL6p5doFLb2Ldhrro
OoSP/9Z8GaEu6B3YP+5QP5gAXtKXntLdsFZA3XididLsZCSJtazuSv4uUUxPg86K
DagY+Yhlb05vZH4JMjC7MJztbaq2rbP/tzYPvdR8I6aN8OIORchzu/36kwp8TVGk
2FiYJSxk3ccYcVTqZjORjQadUn2Hx+rCKgC8lQLZTSnQ+/ZBmPC6vwiHCDVrgVBx
mJeUBnbBFpQMyO3hzOKvLu2hHcHfJrBb7DnpVEUsenfl9O4XPu1LVmuCN7Osh9jT
x+k7PNx1yrTzZpnICz8z92U13zgkaxqkaYAqzQZqEFae8Z2/SWitIls9pM5ZZTbX
nZfWWP1qQ8cN27/fTNz6Igg1Lk3NS0zRsw2kSuRBCUejiQQscByOpEkxveJDb64u
jEVCM9HqYZccKq+j77A1WJez5B7twDSAxl6pbtE0gD+++TqfOfCWxLjbVzx4l89X
/Osr2keeB4tLnna2ltqtvlfH5rL0/A9OmkpXhlwW+VML73rP3fB0y1HCoEzmMyYQ
XQVGwS0d8MMfXyXylpQn767Xxc3qhGdhutugHQgagOe8F74FgZOH5AZQTxBf4e8R
g1uotqy/Fwxojtf9aJf4voeD2QuXg25E+qgDoQf6QW3EFCtaBDQ=
=KEYR
-----END PGP SIGNATURE-----
Merge tag 'at91-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
AT91 fixes for 6.0
It contains:
- fixes for self-refresh on SAMA7G5 while in AT91 power management modes:
one disabling a DDR PHY controller DLL which has been proved to be buggy
and can introduce glitches that can cause unexpected behavior; one
fixing the DDR PHY recalibration which cannot work for all possible
cases (due to hardware bug) while using backup and self-refresh AT91
power management mode;
- one defconfig fix to remove CONFIG_MICROCHIP_PIT64B from all AT91
defconfigs;
- multiple device tree fixes for regulators to avoid having some of them
enabled all the time and to describe min and max output ranges
according to board capabilities.
* tag 'at91-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama5d2_icp: don't keep vdd_other enabled all the time
ARM: dts: at91: sama5d27_wlsom1: don't keep ldo2 enabled all the time
ARM: dts: at91: sama7g5ek: specify proper regulator output ranges
ARM: dts: at91: sama5d2_icp: specify proper regulator output ranges
ARM: dts: at91: sama5d27_wlsom1: specify proper regulator output ranges
ARM: at91: pm: fix DDR recalibration when resuming from backup and self-refresh
ARM: at91: pm: fix self-refresh for sama7g5
ARM: configs: at91: remove CONFIG_MICROCHIP_PIT64B
Link: https://lore.kernel.org/r/20220902085744.4193554-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The soc/fsl/dpio driver will perform a soc_device_match()
to determine the optimal cache settings for a given CPU core.
If FSL_GUTS is not enabled, this search will fail and
the driver will not configure cache stashing for the given
DPIO, and a string of "unknown SoC" messages will appear:
fsl_mc_dpio dpio.7: unknown SoC version
fsl_mc_dpio dpio.6: unknown SoC version
fsl_mc_dpio dpio.5: unknown SoC version
Fixes: 51da14e96e ("soc: fsl: dpio: configure cache stashing destination")
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220901052149.23873-2-matt@traverse.com.au'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
6.0, please pull the following:
- William fixes a number of the recently submitted DTS files for 63178,
6846, 6878 to have correct PSCI node propertie as well as correct timer
CPU masks
-----BEGIN PGP SIGNATURE-----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=hjVE
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=SM9p
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.0/devicetree' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
6.0, please pull the following:
- William fixes a number of the recently submitted DTS files for 63178,
6846, 6878 to have correct PSCI node propertie as well as correct timer
CPU masks
* tag 'arm-soc/for-6.0/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: bcmbca: bcm6878: cosmetic change
ARM: dts: bcmbca: bcm6878: fix timer node cpu mask flag
ARM: dts: bcmbca: bcm6846: fix interrupt controller node
ARM: dts: bcmbca: bcm6846: clean up psci node
ARM: dts: bcmbca: bcm6846: fix timer node cpu mask flag
ARM: dts: bcmbca: bcm63178: cosmetic change
ARM: dts: bcmbca: bcm63178: fix interrupt controller node
ARM: dts: bcmbca: bcm63178: clean up psci node
ARM: dts: bcmbca: bcm63178: fix timer node cpu mask flag
Link: https://lore.kernel.org/r/20220829225103.753223-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The change from kcalloc() to kvmalloc() means that arg->nr_pages
might now be large enough that the "args->nr_pages << PAGE_SHIFT" can
result in an integer overflow.
Fixes: b3f7931f5c ("xen/gntdev: switch from kcalloc() to kvcalloc()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/YxDROJqu/RPvR0bi@kili
Signed-off-by: Juergen Gross <jgross@suse.com>
Xen blkfront advertises its support of the persistent grants feature
when it first setting up and when resuming in 'talk_to_blkback()'.
Then, blkback reads the advertised value when it connects with blkfront
and decides if it will use the persistent grants feature or not, and
advertises its decision to blkfront. Blkfront reads the blkback's
decision and it also makes the decision for the use of the feature.
Commit 402c43ea6b ("xen-blkfront: Apply 'feature_persistent' parameter
when connect"), however, made the blkfront's read of the parameter for
disabling the advertisement, namely 'feature_persistent', to be done
when it negotiate, not when advertise. Therefore blkfront advertises
without reading the parameter. As the field for caching the parameter
value is zero-initialized, it always advertises as the feature is
disabled, so that the persistent grants feature becomes always disabled.
This commit fixes the issue by making the blkfront does parmeter caching
just before the advertisement.
Fixes: 402c43ea6b ("xen-blkfront: Apply 'feature_persistent' parameter when connect")
Cc: <stable@vger.kernel.org> # 5.10.x
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220831165824.94815-4-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
The advertisement of the persistent grants feature (writing
'feature-persistent' to xenbus) should mean not the decision for using
the feature but only the availability of the feature. However, commit
74a852479c ("xen-blkfront: add a parameter for disabling of persistent
grants") made a field of blkfront, which was a place for saving only the
negotiation result, to be used for yet another purpose: caching of the
'feature_persistent' parameter value. As a result, the advertisement,
which should follow only the parameter value, becomes inconsistent.
This commit fixes the misuse of the semantic by making blkfront saves
the parameter value in a separate place and advertises the support based
on only the saved value.
Fixes: 74a852479c ("xen-blkfront: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220831165824.94815-3-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
The advertisement of the persistent grants feature (writing
'feature-persistent' to xenbus) should mean not the decision for using
the feature but only the availability of the feature. However, commit
aac8a70db2 ("xen-blkback: add a parameter for disabling of persistent
grants") made a field of blkback, which was a place for saving only the
negotiation result, to be used for yet another purpose: caching of the
'feature_persistent' parameter value. As a result, the advertisement,
which should follow only the parameter value, becomes inconsistent.
This commit fixes the misuse of the semantic by making blkback saves the
parameter value in a separate place and advertises the support based on
only the saved value.
Fixes: aac8a70db2 ("xen-blkback: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220831165824.94815-2-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Clang warns:
arch/powerpc/platforms/pseries/papr_scm.c:492:6: warning: variable 'rc' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
if (!p->stat_buffer_len)
^~~~~~~~~~~~~~~~~~~
arch/powerpc/platforms/pseries/papr_scm.c:523:64: note: uninitialized use occurs here
dev_info(&p->pdev->dev, "nvdimm pmu didn't register rc=%d\n", rc);
^~
include/linux/dev_printk.h:150:67: note: expanded from macro 'dev_info'
dev_printk_index_wrap(_dev_info, KERN_INFO, dev, dev_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~~
include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap'
_p_func(dev, fmt, ##__VA_ARGS__); \
^~~~~~~~~~~
arch/powerpc/platforms/pseries/papr_scm.c:492:2: note: remove the 'if' if its condition is always false
if (!p->stat_buffer_len)
^~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/platforms/pseries/papr_scm.c:484:8: note: initialize the variable 'rc' to silence this warning
int rc, nodeid;
^
= 0
1 warning generated.
The call to papr_scm_pmu_check_events() was eliminated but a return code
was not added to the if statement. Add the same return code from
papr_scm_pmu_check_events() for this condition so there is no more
warning.
Fixes: 9b1ac04698 ("powerpc/papr_scm: Fix nvdimm event mappings")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1701
Link: https://lore.kernel.org/r/20220830151256.1473169-1-nathan@kernel.org
This reverts commit ef5b570d37.
Zhouyi reported that commit is causing crashes when running rcutorture
with KASAN enabled:
BUG: using smp_processor_id() in preemptible [00000000] code: rcu_torture_rea/100
caller is rcu_preempt_deferred_qs_irqrestore+0x74/0xed0
CPU: 4 PID: 100 Comm: rcu_torture_rea Tainted: G W 5.19.0-rc5-next-20220708-dirty #253
Call Trace:
dump_stack_lvl+0xbc/0x108 (unreliable)
check_preemption_disabled+0x154/0x160
rcu_preempt_deferred_qs_irqrestore+0x74/0xed0
__rcu_read_unlock+0x290/0x3b0
rcu_torture_read_unlock+0x30/0xb0
rcutorture_one_extend+0x198/0x810
rcu_torture_one_read+0x58c/0xc90
rcu_torture_reader+0x12c/0x360
kthread+0x1e8/0x220
ret_from_kernel_thread+0x5c/0x64
KASAN will generate instrumentation instructions around the
WRITE_ONCE(local_paca->irq_soft_mask, mask):
0xc000000000295cb0 <+0>: addis r2,r12,774
0xc000000000295cb4 <+4>: addi r2,r2,16464
0xc000000000295cb8 <+8>: mflr r0
0xc000000000295cbc <+12>: bl 0xc00000000008bb4c <mcount>
0xc000000000295cc0 <+16>: mflr r0
0xc000000000295cc4 <+20>: std r31,-8(r1)
0xc000000000295cc8 <+24>: addi r3,r13,2354
0xc000000000295ccc <+28>: mr r31,r13
0xc000000000295cd0 <+32>: std r0,16(r1)
0xc000000000295cd4 <+36>: stdu r1,-48(r1)
0xc000000000295cd8 <+40>: bl 0xc000000000609b98 <__asan_store1+8>
0xc000000000295cdc <+44>: nop
0xc000000000295ce0 <+48>: li r9,1
0xc000000000295ce4 <+52>: stb r9,2354(r31)
0xc000000000295ce8 <+56>: addi r1,r1,48
0xc000000000295cec <+60>: ld r0,16(r1)
0xc000000000295cf0 <+64>: ld r31,-8(r1)
0xc000000000295cf4 <+68>: mtlr r0
If there is a context switch before "stb r9,2354(r31)", r31 may
not equal to r13, in such case, irq soft mask will not work.
The usual solution of marking the code ineligible for instrumentation
forces the code out-of-line, which we would prefer to avoid. Christophe
proposed a partial revert, but Nick raised some concerns with that. So
for now do a full revert.
Reported-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
[mpe: Construct change log based on Zhouyi's original report]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220831131052.42250-1-mpe@ellerman.id.au
The CPG block on the RZ/Five SoC is almost identical to one found on the
RZ/G2UL SoC. "renesas,r9a07g043-cpg" compatible string will be used on
the RZ/Five SoC so to make this clear, update the comment to include
RZ/Five SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220726174525.620-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Return value from cfg80211_rx_mgmt() directly instead of
taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220830105505.287564-1-cui.jinpeng2@zte.com.cn
Add the missing destroy_workqueue() before return from rtw_core_init()
in error path.
Fixes: fe101716c7 ("rtw88: replace tx tasklet with work queue")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220826023817.3908255-1-yangyingliang@huawei.com
We have V3H Condor board, and will have V3H2 Condor-I board.
This patch adds condor-common.dtsi to share the common settings
between these boards.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871qsy625m.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
With 'unevaluatedProperties' support implemented, there are a number of
warnings when running dtbs_check:
arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dtb: spi@ee200000: Unevaluated properties are not allowed ('clock-names' was unexpected)
From schema: Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
The main problem is that the DT bindings do not allow clock-names.
So just drop the clock-names properties from the SoC DTSI files.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220829215128.5983-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
This does a "chunk_len - 4" subtraction later when it calls:
ret = wfx_hif_configuration(wdev, buf + 4, chunk_len - 4);
so check for "chunk_len" is less than 4.
Fixes: dcbecb4979 ("staging: wfx: allow new PDS format")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/Yv8eX7Xv2ubUOvW7@kili
There some bounds checking to ensure that "map_addr" is not out of
bounds before the start of the loop. But the checking needs to be
done as we iterate through the loop because "map_addr" gets larger as
we iterate.
Fixes: 26f1fad29a ("New driver: rtl8xxxu (mac80211)")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/Yv8eGLdBslLAk3Ct@kili
Just go through a 'make savedefconfig' cycle to pick up fresh Kconfig
details, no change in settings, just reordering of some entries.
( This makes followup changes generated via 'make savedefconfig'
contain less noise. )
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Declare this to tell AP we can support beamformee over bandwidth 160M,
and then yield better performance in field.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220826061011.9037-3-pkshih@realtek.com
Writing address to kick hardware to initialize address CAM, and then poll
ready bit to determine completed. Old wrong code poll wrong register
address, so it can lead error and fail to bring up interface.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220826061011.9037-2-pkshih@realtek.com
Packets containing HTC field with legacy rate could be dropped by AP. If
TX rate of report is lower than MCS2, hardware might fall back rate to
legacy. Therefore, add a checking rule to avoid HTC field in this
situation.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220826061011.9037-1-pkshih@realtek.com
Number of TX resource must be minimum of TX_BD and TX_WD. Only considering
TX_BD could drop TX packets pulled from mac80211 if TX_WD is unavailable.
Fixes: 52edbb9fb7 ("rtw89: ps: access TX/RX rings via another registers in low power mode")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220824063312.15784-2-pkshih@realtek.com
We turn off interrupt in ISR, and re-enable interrupt in threadfn or
napi_poll according to the mode it stays. If we are turning off interrupt,
rtwpci->running flag is unset and interrupt handler stop processing even
if it was called, so disallow to re-enable interrupt in this situation.
Or, wifi chip doesn't trigger interrupt events anymore because interrupt
status (ISR) isn't clear by interrupt handler anymore.
Fixes: c83dcd0508 ("rtw89: pci: add a separate interrupt handler for low power mode")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220824063312.15784-1-pkshih@realtek.com
The calibration value of XTAL offset may be too large in some wifi
modules, that the CFO tracking mechanism under the existing tracking
boundary can not adjust the CFO to the tolerable range. So we enlarge it.
Signed-off-by: Cheng-Chieh Hsieh <cj.hsieh@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220824061425.13764-1-pkshih@realtek.com
We find that suspend/resume tests cause 8852CE lost, because some pci
registers are changed for 8852CE. So, correct them accordingly.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220819064811.37700-6-pkshih@realtek.com
8852CE controls CLKREQ, ASPM L1, L1ss via wifi registers
instead, so change them accordingly.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220819064811.37700-5-pkshih@realtek.com
There is chance that PCI PHY auto adaption fail. When first time boot up,
software restore the right adaption value and close PHY auto adaption
mechanism.
Signed-off-by: Chia-Yuan Li <leo.li@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220819064811.37700-4-pkshih@realtek.com
It is found that 8852ce loses some beacon after
enabling deep ps mode. We set TBTT shift to wake up
firmware early to open RF/BB for receiving beacon in time.
Signed-off-by: Chia-Yuan Li <leo.li@realtek.com>
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220819064811.37700-3-pkshih@realtek.com
When starting to send heavy traffic in low power mode,
driver will call multiple tx wake notify to wake firmware
within a short time. In this situation, firmware may miss
power mode change request from driver and leads to status
error. So we change driver to call power_mode_change at most
three times to make sure firmware could get the request.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220819064811.37700-2-pkshih@realtek.com
The bacam_v1 must do additional initialization, and H2C content of BA CAM
is also different. So, correct them accordingly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220816013247.6243-3-pkshih@realtek.com
8852A has 2 BA CAM entries, but 8852C has 8 entries. Add a field to
discriminate their differences.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220816013247.6243-2-pkshih@realtek.com
TX power byrate:
doesn't change
TX power limit:
configure values for KCC and UK
refine a bit configuration vales
TX power limit_ru:
configure values for KCC and UK
refine a bit configuration values
change 6GHz to follow indoor setting
configure 6GHz values for ETSI
TX power shape:
change with TX power limit/limit_ru
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220812093116.56791-4-pkshih@realtek.com
Some chips' RF TX power limit/limit_ru tables start to configure some
negative values. Fix the setting logic to prevent negative values from
polluting fields of others.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220812093116.56791-2-pkshih@realtek.com
This branch is ~14k commits behind upstream, and has an old merge base
from early into the merge window, refresh it to v6.0-rc3+fixes before
queueing up new commits.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Because RTL8852c firmware handshake use different structure definition
with RTL8852a, so it's necessary to update a version for RTL8852c.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220725023509.43114-10-pkshih@realtek.com
Because the later firmware had patched some new feature, it can control
the Wi-Fi/BT slots more efficiently. This patch enhance it for better
Wi-Fi SCC mode performance.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220725023509.43114-9-pkshih@realtek.com
Due to the difference of Wi-Fi firmware supported feature, RTL8852C
need to defined more policy to enable the features.
(Ex: DBCC, Wi-Fi multi-role, TDMA instant and so on)
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220725023509.43114-8-pkshih@realtek.com
The H2C format and support feature are different. The newer Wi-Fi firmware
and driver branch need to handshake more information like DBCC or P2P
connection info.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220725023509.43114-7-pkshih@realtek.com
RTL8852C use a later version Wi-Fi firmware, there are some parameters
need to be defined. These new parameter can avoid some unexpected
TDMA mode while Wi-Fi enter/leave lps.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220725023509.43114-6-pkshih@realtek.com
It is for setting up BT slot max length at BT auto slot mechanism.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220725023509.43114-5-pkshih@realtek.com
Add a part of logic to parse type of ctrl report from firmware, and
remove Bluetooth packet counter count from driver, the feature was
moved to firmware at rtl8852c.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220725023509.43114-4-pkshih@realtek.com
To configure the different chips with different coexistence version,
separated the firmware feature version matching number is necessary.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220725023509.43114-3-pkshih@realtek.com
Update scoreboard setting to let Bluetooth know Wi-Fi power save state.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220725023509.43114-2-pkshih@realtek.com
