Simply check the max_register value to decide whether
MESON_SAR_ADC_REG11 is present on the current IP revision. This allows
dropping two additional bool fields from struct meson_sar_adc_param
which previously had to be manually kept in sync. No functional changes
intended.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20241224142941.97759-4-martin.blumenstingl@googlemail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The field should be called "vref_voltage", without a typo in the word
voltage. No functional changes intended.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20241224142941.97759-2-martin.blumenstingl@googlemail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
I assume this device is only used on architectures where a 8 byte
integer type is always 8 byte aligned. However, I would prefer IIO
drivers to never make that assumption as the code gets copied into
new drivers which are not so tightly couple to one driver and those
can run on architectures that align these types to only 4 bytes in which
case this structure may be 4 byte to small leading to a buffer overrun.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241215182912.481706-21-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The vast majority of IIO drivers use aligned_s64 for the type of the
timestamp field. It is not a bug to use int64_t and until this series
iio_push_to_buffers_with_timestamp() took and int64_t timestamp, it
is inconsistent. This change is to remove that inconsistency and
ensure there is one obvious choice for future drivers.
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241215182912.481706-19-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The vast majority of IIO drivers use aligned_s64 for the type of the
timestamp field. It is not a bug to use int64_t and until this series
iio_push_to_buffers_with_timestamp() took and int64_t timestamp, it
is inconsistent. This change is to remove that inconsistency and
ensure there is one obvious choice for future drivers.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241215182912.481706-18-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The vast majority of IIO drivers use aligned_s64 for the type of the
timestamp field. It is not a bug to use int64_t and until this series
iio_push_to_buffers_with_timestamp() took and int64_t timestamp, it
is inconsistent. This change is to remove that inconsistency and
ensure there is one obvious choice for future drivers.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241215182912.481706-17-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use this new type to both slightly simplify the code and avoid
confusing static analysis tools. Mostly this series is about consistency
to avoid this code pattern getting copied into more drivers.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241215182912.481706-15-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use this new type to both slightly simplify the code and avoid
confusing static analysis tools. Mostly this series is about consistency
to avoid this code pattern getting copied into more drivers.
Acked-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241215182912.481706-14-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use this new type to both slightly simplify the code and avoid
confusing static analysis tools. Mostly this series is about consistency
to avoid this code pattern getting copied into more drivers.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241215182912.481706-13-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use this new type to both slightly simplify the code and avoid
confusing static analysis tools. Mostly this series is about consistency
to avoid this code pattern getting copied into more drivers.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241215182912.481706-12-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use this new type to both slightly simplify the code and avoid
confusing static analysis tools. Mostly this series is about consistency
to avoid this code pattern getting copied into more drivers.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241215182912.481706-11-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use this new type to both slightly simplify the code and avoid
confusing static analysis tools. Mostly this series is about consistency
to avoid this code pattern getting copied into more drivers.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241215182912.481706-10-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use this new type to both slightly simplify the code and avoid
confusing static analysis tools. Mostly this series is about consistency
to avoid this code pattern getting copied into more drivers.
Acked-By: Matti Vaittinen <mazziesaccount@gmail.com> #For bu27034, rpr0521
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241215182912.481706-9-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use this new type to both slightly simplify the code and avoid
confusing static analysis tools. Mostly this series is about consistency
to avoid this code pattern getting copied into more drivers.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241215182912.481706-8-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use this new type to both slightly simplify the code and avoid
confusing static analysis tools. Mostly this series is about consistency
to avoid this code pattern getting copied into more drivers.
Acked-By: Matti Vaittinen <mazziesaccount@gmail.com> #for the BD1390
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241215182912.481706-7-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use this new type to both slightly simplify the code and avoid
confusing static analysis tools. Mostly this series is about consistency
to avoid this code pattern getting copied into more drivers.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241215182912.481706-6-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use this new type to both slightly simplify the code and avoid
confusing static analysis tools. Mostly this series is about consistency
to avoid this code pattern getting copied into more drivers.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241215182912.481706-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use this new type to both slightly simplify the code and avoid
confusing static analysis tools. Mostly this series is about consistency
to avoid this code pattern getting copied into more drivers.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241215182912.481706-4-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Whilst it doesn't actually make any difference because the code
that fills this field doesn't care, timestamps are all signed.
Use the new aligned_s64 instead of open coding alignment to avoid
confusing static analyzers and give slightly cleaner code.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241215182912.481706-3-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Whilst it doesn't actually make any difference because the code
that fills this field doesn't care, timestamps are all signed.
Use the new aligned_s64 instead of open coding alignment to avoid
confusing static analyzers and give slightly cleaner code.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241215182912.481706-2-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for STM32MP25 SoC. Use newly introduced compatible to handle
this new HW variant. Add TIM20 trigger definitions that can be used by
the stm32 analog-to-digital converter. Use compatible data to identify
it.
As the counter framework is now superseding the deprecated IIO counter
interface (IIO_COUNT), don't support it. Only register IIO trigger
devices for ADC usage. So, make the valids_table a cfg option.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://patch.msgid.link/20241220095927.1122782-4-fabrice.gasnier@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Configuration information is now prioritized from the firmware file.
If the firmware file is missing or fails to parse, the driver falls
back to using the default configuration list for writing the settings.
Signed-off-by: Yasin Lee <yasin.lee.x@gmail.com>
Link: https://patch.msgid.link/20241216-hx9023s-firmware-20241209-v2-1-ce1b0a1121d0@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ROHM BD79703 is a 6 channel digital to analog converter.
Based on the data-sheet examples the hardware would support setting the
DAC word without changing the actual output. The data-sheet is not too
specific on how the enabling the output of new voltage set by DAC
should be done - hence this is not implemented by the driver.
The BD79703 would also support two specific "PULL_DOWN" modes. These
aren't currently supported by the driver either.
Add a very basic support for controlling the channel outputs one-by-one.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/bc77d7b979ca28408a216f597082fcd94ec63be7.1734608215.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The sysfs core now allows instances of 'struct bin_attribute' to be
moved into read-only memory. Make use of that to protect them against
accidental or malicious modifications.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20241215-sysfs-const-bin_attr-iio-v1-1-a5801212482e@weissschuh.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since there are no more direct accesses to the indio_dev->scan_timestamp
value, it can be marked as __private and use the macro ACCESS_PRIVATE()
in order to access it. Like this, static checkers will be able to inform
in case someone tries to either write to the value, or read its value
directly.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241214191421.94172-5-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Drop conditional in favor of always calculating the timestamp value.
This simplifies the code and allows to drop usage of internal private
variable "scan_timestamp" of the struct iio_dev.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241214191421.94172-4-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Drop the recurrent allocation of the data buffer from the trigger
handler and put it in the iio_priv(). This way, the maximum amount of
channels is always allocated in favor of simpler code and drop
of usage of the internal private variable "scan_timestamp" of the
struct iio_dev.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241214191421.94172-3-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Drop a minor optimization of zeroing the padding between data and
timestamp and zero the whole structure. This is done in favor of
simpler code, and in order to drop the usage of the internal private
variable "scan_timestamp" of the struct iio_dev.
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241214191421.94172-2-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Change the order of regulator enable and reset so that power supplies
are turned on before touching the reset line. Generally, chips should
have the VDRIVE supply enabled before applying voltage on any pins.
While we are at it, remove the voltage level checks. If the power
supplies are not supplying the correct voltage, this is a hardware
design problem, not a software problem.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20241216-iio-regulator-cleanup-round-6-v2-1-9482164b68cb@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Change X to Y when referring to channel number in the ABI documentation.
There were only a few cases using X (and one using Z). By far, most
documented attributes are using Y for the channel number placeholder.
For consistency, we should follow the same convention throughout.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20241216-doc-iio-use-voltagey-consistently-v1-1-9e34a72133bc@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The documentation for struct ad5624r_state contains members that are (no
longer?) part of the structure.
Remove unnecessary docs.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/Z2KFC7ZBwmM69Qb4@mva-rohm
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add devicetree bindings for the OPT4060 RGBW color sensor.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Per-Daniel Olsson <perdaniel.olsson@axis.com>
Link: https://patch.msgid.link/20241218104836.2784523-2-perdaniel.olsson@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This fixes a checkpatch warning:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
#70: FILE: drivers/iio/adc/ad_sigma_delta.c:253:
+ unsigned status_reg;
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20241218114809.1378063-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The BMP{2,3,5}80 and BME280 devices have an SPI interface, so include it
in the device-tree.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://patch.msgid.link/20241209233845.29539-2-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace the powerup / powerdown functions by a generic function to put
the sensor in STANDBY, or MEASURE mode. When configuring the FIFO for
several features of the accelerometer, it is recommended to put
measuring in STANDBY mode.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
Link: https://patch.msgid.link/20241213211909.40896-2-l.rubusch@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ad7173 family of chips has up to four calibration modes.
Internal zero scale: removes ADC core offset errors.
Internal full scale: removes ADC core gain errors.
System zero scale: reduces offset error to the order of channel noise.
System full scale: reduces gain error to the order of channel noise.
All voltage channels will undergo an internal zero/full scale
calibration at bootup.
System zero/full scale can be done after bootup using the newly created
iio interface 'sys_calibration' and 'sys_calibration_mode'
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://patch.msgid.link/20241202-ad411x_calibration-v3-1-beb6aeec39e2@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ADI PulSAR series of single-channel devices comprises differential and
pseudo-differential ADCs that don't require any input data from the host
controller. By not requiring a data input line, PulSAR devices can operate
with a 3-wire only data bus in some setups.
The AD4000 series and the single-channel PulSAR series of devices have
similar SPI transfer specifications and wiring configurations.
Single-channel PulSAR devices are slower than AD4000 and don't have a
configuration register. That taken into account, single-channel PulSARs can
be supported by the ad4000 driver without any increase in code complexity.
Extend the AD4000 driver to also support single-channel PulSAR devices.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/2bfb904e29914c3dc4905e1c87fcc735575f330d.1733147444.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The SPI transfers for AD4020, AD4021, and AD4022 have slightly different
timing specifications. Use device specific timing constraints to set SPI
transfer parameters. While tweaking time constraints, remove time related
defines including unused AD4000_TQUIET1_NS.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/a36fcf44cc00b2a498170e2ae3f005829d516266.1733147444.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ADC data is pushed to the IIO buffer along with timestamp but no
timestamp channel was provided to retried the time data.
Add a timestamp channel to provide sample capture time.
Suggested-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/d1f1bb1b726b90a3a7c1148c65d2f7fe073e2b15.1733147444.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Extend the AD4000 series device tree documentation to also describe
PulSAR devices.
The single-channel series of PulSAR devices is similar to the AD4000 series
except PulSAR devices sample at slower rates and don't have a
configuration register. Because PulSAR devices don't have a configuration
register, they don't support all features of AD4000 devices and thus fewer
interfaces are provided to user space. Also, while AD4000 may have their
SDI pin connected to SPI host MOSI line, PulSAR SDI pin is never connected
to MOSI.
Some devices within the PulSAR series are just faster versions of others.
>From fastest to slowest, AD7980, AD7988-5, AD7686, AD7685, and AD7988-1 are
all 16-bit pseudo-differential pin-for-pin compatible ADCs. Devices that
only vary on the sample rate are documented with a common fallback
compatible.
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/cc05f1471c409ab38722cd0e80fd5857ff9ce5db.1733147444.git.marcelo.schmitt@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Attributes of iio providers are exposed via sysfs. Typically, providers
pass attribute values to the iio core, which handles formatting and
printing to sysfs. However, some attributes, such as labels or extended
info, are directly formatted and printed to sysfs by provider drivers
using sysfs_emit() and sysfs_emit_at(). These helpers assume the read
buffer, allocated by sysfs fop, is page-aligned. When these attributes
are accessed by consumer drivers, the read buffer is allocated by the
consumer and may not be page-aligned, leading to failures in the
provider's callback that utilizes sysfs_emit*.
Add a check to ensure that read buffers for labels and external info
attributes are page-aligned. Update the prototype documentation as well.
Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://patch.msgid.link/20241202-iio-kmalloc-align-v1-1-aa9568c03937@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
