They are used by systemd to rename network interfaces to predictable
interface names, e.g. end0 & end1.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- add missing (and currently unused) pad groups
- assign muxed GPIO pads for X1 to gpio2 node
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- disable PU/PD if already done with external resistors
- do not configure Schmitt Trigger for outputs
- do not configure DSE / FSEL for inputs
Pad config changes suggested by hardware team.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The IRQ lines from devices on SoM are connected to CPU GPIO on
this mainboard.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Provide GPIO line names for userspace usage, e.g. libgpiod.
While at it, correct the line-name property for ENET[1,2]_INT# gpio hog
and LCD_BLT_EN.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
They are used by systemd to rename network interfaces to predictable
interface names, e.g. end0 & end1.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- add missing (and currently unused) pad groups
- assign muxed GPIO pads for X1 to gpio2 node
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds muxing and configuration of the irq output of the temp
sensor on TQMa93xx that is connected to a GPIO line on MBa93xxLA
While at it, add comment for RTC_EVENT for pcf85063 since the IRQ line
of both devices on SoM are routed to CPU GPIO on MBa93xxLA.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
LPSPI6 features a NAFE13388 analog frontend.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- disable PU/PD if already done with external resistors
- do not configure Schmitt Trigger for outputs
- do not configure DSE / FSEL for inputs
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
With PMIC node in place, add the correct regulators for eMMC.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
With driver support in place add the PMIC node and remove the
fixed-regulators for rails provided by PMIC.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Update the DT to match newest Data Modul i.MX8M Mini eDM SBC rev.A01
board which implements PHY changes. Keep some of the rev.900 PHY node
in the DT so that a DTO can be used to support rev.900 boards easily.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The ISP supports both CSI and parallel interfaces, where port 0
corresponds to the former and port 1 corresponds to the latter. Since
the i.MX8MP's ISPs are connected by the parallel interface to the CSI
receiver, set them both to port 1.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add fixed regulator VCC_5V_SW based on the phyBOARD-Pollux schematics
to reflect the connectivity on the phyBOARD-Pollux-i.MX8MP.
Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add SD-Card property for the bus IO power from the PMIC.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add fixed regulator VDD_IO (3.3v) based on the SoM schematics to reflect
the connectivity on the phyCORE-i.MX8MP.
Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The DT nodes for the MIPI CSI-2 receivers (MIPI_CSI) configure the
CAM1_PIX and CAM2_PIX clocks to 266 MHz through the assigned-clock-rates
property, and report that frequency in the clock-frequency property. The
i.MX8MP reference manual and datasheet list 266 MHz as a nominal
frequency when using both CSI-2 receivers, so all looks normal.
In reality, the clock is actually set to 250 MHz, as the selected
parent, IMX8MP_SYS_PLL2_1000M, has a 1/4 output that is selected as the
closest frequency to 266 MHz. This doesn't break operation of the
device, but is clearly misleading.
Clarify the clock configuration by selecting the IMX8MP_SYS_PLL2_250M
parent, dropping the redundant assigned-clock-rates, and setting
clock-frequency to 250 MHz. This doesn't cause any functional change.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds support for the Kontron Electronics OSM-S i.MX93 SoM
and the matching baseboard BL i.MX93.
The SoM hardware complies to the Open Standard Module (OSM) 1.1
specification, size S (https://sget.org/standards/osm).
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The interrupt pin of the PHY is connected to the GPIO expander, configure
it accordingly.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove unused property num-viewport to fix dtbs warnings.
arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dtb: pcie@3400000: Unevaluated properties are not allowed ('num-viewport' was unexpected)
from schema $id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml#
arch/arm64/boot/dts/freescale/fsl-ls1012a-oxalis.dtb: pcie@3400000: Unevaluated properties are not allowed ('num-viewport' was unexpected)
from schema $id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml#
Cc: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for TPM for phyBOARD Pollux.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX93 11x11 EVK has a ST LSM6DSO connected to I2C, which a is 6-axis
IMU (inertial measurement unit = accelerometer & gyroscope). So add the
missing parts to the DTS file.
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to microchip,usb2514.yaml, the node name must contain
'usb-hub'.
Change it accordingly to fix the following dt-schema warning:
hub@1: $nodename:0: 'hub@1' does not match '^usb(@.*)?'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to adi,adv7533.yaml, the order for the reg and reg-names entries
must be: main, edid, cec, and packet.
Fix it accordingly to remove the following dt-schema warnings:
hdmi@3d: reg-names:1: 'edid' was expected
hdmi@3d: reg-names:2: 'cec' was expected
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove compatible string in overlay file to fix below warning:
gw,imx8mp-gw74xx' is not one of ['fsl,ls1043a-rdb', 'fsl,ls1043a-qds']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove #clock-cells for sai3 because sai3 is not clock controller to fix
below warning:
/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dtb: sai@30c30000: Unevaluated properties are not allowed ('#clock-cells' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add #address-cells and #size-cells for gsc@20 to fix below warning:
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dtb: gsc@20: '#address-cells' is a required propert
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Move reboot node under syscon and change compatible string to
fsl,ls1028a-rstcr because it is exactly same as ls1028a.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dtb:
/syscon@1e60000: failed to match any schema with compatible: ['fsl,ls2080a-rstcr', 'syscon']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to binding doc http://devicetree.org/schemas/spi/fsl,dspi.yaml
and driver drivers/spi/spi-fsl-dspi.c, default is little-endian, should
use big-endian for big-endian system. Remove 'little-endian' to fix below
warning:
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds-85bb.dtb: spi@2100000: Unevaluated properties are not allowed ('little-endian' was unexpected)
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add native HDMI audio to Verdin iMX8MP and all its carriers boards.
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the flexcan[1..5] nodes for imx95.
Reviewed-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add DDR Perf Monitor for i.MX95.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
fsl,ls2080a-pcie actual is the same as fsl,ls2085a-pcie. Only keep one is
enough, so remove "fsl,ls2085a-pcie" to fix below warnings.
arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dtb: pcie@3400000: compatible: ['fsl,ls2080a-pcie', 'fsl,ls2085a-pcie'] is too long
from schema $id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove undocumented compatible string fsl,ls-pcie-ep to fix below
CHECK_DTBS warning.
arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dtb: pcie_ep@3400000: compatible: ['fsl,ls1046a-pcie-ep', 'fsl,ls-pcie-ep'] is too long
from schema $id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie-ep.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to binding doc fsl,ddr.yaml, big-endian is default setting. So
remove it to fix below CHECK_DTBS warnings.
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: memory-controller@1080000: 'big-endian' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,ddr.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to binding doc fsl,esdhc.yaml, the default endian mode is
big-endian. So remove big-endian property to fix below CHECK_DTBS warnings:
arm64/boot/dts/freescale/fsl-ls1012a-qds.dtb: mmc@1560000: Unevaluated properties are not allowed ('big-endian' was unexpected)
from schema $id: http://devicetree.org/schemas/mmc/fsl,esdhc.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add msi-cell = <1> for GIC ITS. msi-parent have to be kept because it is
checked by U-Boot due to historical reasons to fix up msi-map.
Fix below CHECK_DTBS warning:
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dtb: interrupt-controller@6000000: msi-controller@6020000: '#msi-cells' is a required property
from schema $id: http://devicetree.org/schemas/interrupt-controller/arm,gic-v3.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add platform specific compatiable string 'fsl,ls1028-reset' for syscon and
move reboot node under reset syscon node to fix below warning.
syscon@1e60000: compatible: 'anyOf' conditional failed, one must be fixed:
['syscon'] is too short
'syscon' is not one of ['al,alpine-sysfabric-service', ...
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Change node name 'uqe' to 'uqe-bus'.
Remove #address-cells and #size-cells for nodes, which have not child node.
Fix below CHECK_DTBS warning:
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: uqe@2400000: si@700: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe.yaml#
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: uqe@2400000: siram@1000: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe.yaml#
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: uqe@2400000: $nodename:0: 'uqe@2400000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$'
from schema $id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe.yaml#
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: uqe@2400000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'qeic@80', 'ucc@2000', 'ucc@2200' were unexpected)
from schema $id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe.yaml#
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: qeic@80: '#address-cells' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-ic.yaml#
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: si@700: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-si.yaml#
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: siram@1000: '#address-cells', '#size-cells' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,qe-siram.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
pcsphy-handle already deprecated according to binding fsl,fman-dtsec.yaml.
Add new common pcs-handle at dts and fix below CHECK_DTBS warning.
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: fman@1a00000: ethernet@e0000: 'pcs-handle' is a dependency of 'pcs-handle-names'
from schema $id: http://devicetree.org/schemas/net/fsl,fman.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Invoke power-domain.yaml if node name as 'power-control'.
Rcpm actually are not power domain controller. It just control wakeup
capability. So rename it as wakeup-control. Fix below CHECK_DTBS warning.
power-controller@1ee2140: '#power-domain-cells' is a required property
from schema $id: http://devicetree.org/schemas/power/power-domain.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The node name 'aux-bus' is special word. It invokes dp-aux-bus.yaml binding
check. Simple change to 'bus' to fix below warning.
aux-bus: '#address-cells', '#size-cells', 'compatible', 'dma-ranges', 'ranges', 'sata@3200000', 'usb@2f00000', 'usb@3000000', 'usb@3100000' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/display/dp-aux-bus.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
