[ Upstream commit a3034bf074 ]
An integer overflow occurs in cfg80211_calculate_bitrate_he() when
calculating bitrates for high throughput HE configurations.
For example, with 160 MHz bandwidth, HE-MCS 13, HE-NSS 4, and HE-GI 0,
the multiplication (result * rate->nss) overflows the 32-bit 'result'
variable before division by 8, leading to significantly underestimated
bitrate values.
The overflow occurs because the NSS multiplication operates on a 32-bit
integer that cannot accommodate intermediate values exceeding
4,294,967,295. When overflow happens, the value wraps around, producing
incorrect bitrates for high MCS and NSS combinations.
Fix this by utilizing the 64-bit 'tmp' variable for the NSS
multiplication and subsequent divisions via do_div(). This approach
preserves full precision throughout the entire calculation, with the
final value assigned to 'result' only after completing all operations.
Signed-off-by: Veerendranath Jakkam <veerendranath.jakkam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260109-he_bitrate_overflow-v1-1-95575e466b6e@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit caa3296492 ]
Add Intel Nova Lake PCH-S SPI serial flash PCI ID to the list of
supported devices. This is the same controller found in previous
generations.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20260115120305.10080-1-alan.borzeszkowski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49985bc466 ]
Audio control requests that sets sampling frequency sometimes fail on
this card. Adding delay between control messages eliminates that problem.
usb 1-1: New USB device found, idVendor=2fc6, idProduct=f06b
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: MOONDROP Moonriver2 Ti
usb 1-1: Manufacturer: MOONDROP
usb 1-1: SerialNumber: MOONDROP Moonriver2 Ti
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Reviewed-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB6217911EFC7E9224935FA507D28DA@TYUPR06MB6217.apcprd06.prod.outlook.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3f380ce6b ]
regcache_maple_write() allocates a new block ('entry') to merge
adjacent ranges and then stores it with mas_store_gfp().
When mas_store_gfp() fails, the new 'entry' remains allocated and
is never freed, leaking memory.
Free 'entry' on the failure path; on success continue freeing the
replaced neighbor blocks ('lower', 'upper').
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Link: https://patch.msgid.link/20260105031820.260119-1-kaushlendra.kumar@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b062a899c9 ]
In hisi_spi_debugfs_init, spi controller pointer is calculated
by container_of macro, and the member is hs->dev. But the host
cannot be calculated offset directly by this. (hs->dev) points
to (pdev->dev), and it is the (host->dev.parent) rather than
(host->dev) points to the (pdev->dev), which is set in
__spi_alloc_controller.
In this patch, this issues is fixed by getting the spi_controller
data from pdev->dev by dev_get_drvdata() directly. (dev->driver_data)
points to the spi controller data in the probe stage.
Signed-off-by: Devyn Liu <liudingyuan@h-partners.com>
Reviewed-by: Yang Shen <shenyang39@huawei.com>
Link: https://patch.msgid.link/20260108075323.3831574-1-liudingyuan@h-partners.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d89aad92cf ]
When scanning for the reset pin, we could get an -EPROBE_DEFER.
The driver would assume that no reset pin had been defined,
which would mean that the chip would never be powered.
Now we both respect any error we get from devm_gpiod_get_optional.
We also now properly report the missing GPIO definition when
'gpio_reset' is NULL.
Signed-off-by: Dimitrios Katsaros <patcherwork@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20260113-sound-soc-codecs-tvl320adcx140-v4-3-8f7ecec525c8@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e29db1b08 ]
Add DMI match for ASUSTeK COMPUTER INC. M6500RE to enable the
internal microphone.
Signed-off-by: Radhi Bajahaw <bajahawradhi@gmail.com>
Link: https://patch.msgid.link/20260112203814.155-1-bajahawradhi@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fa8961d3a ]
When the socket is closed while in TCP_LISTEN a callback is run to
flush all outstanding packets, which in turns calls
nvmet_tcp_listen_data_ready() with the sk_callback_lock held.
So we need to check if we are in TCP_LISTEN before attempting
to get the sk_callback_lock() to avoid a deadlock.
Link: https://lore.kernel.org/linux-nvme/CAHj4cs-zu7eVB78yUpFjVe2UqMWFkLk8p+DaS3qj+uiGCXBAoA@mail.gmail.com/
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef5749ef8b ]
In this case, the user constructed the parameters with maxpacksize 40
for rate 22050 / pps 1000, and packsize[0] 22 packsize[1] 23. The buffer
size for each data URB is maxpacksize * packets, which in this example
is 40 * 6 = 240; When the user performs a write operation to send audio
data into the ALSA PCM playback stream, the calculated number of frames
is packsize[0] * packets = 264, which exceeds the allocated URB buffer
size, triggering the out-of-bounds (OOB) issue reported by syzbot [1].
Added a check for the number of single data URB frames when calculating
the number of frames to prevent [1].
[1]
BUG: KASAN: slab-out-of-bounds in copy_to_urb+0x261/0x460 sound/usb/pcm.c:1487
Write of size 264 at addr ffff88804337e800 by task syz.0.17/5506
Call Trace:
copy_to_urb+0x261/0x460 sound/usb/pcm.c:1487
prepare_playback_urb+0x953/0x13d0 sound/usb/pcm.c:1611
prepare_outbound_urb+0x377/0xc50 sound/usb/endpoint.c:333
Reported-by: syzbot+6db0415d6d5c635f72cb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=6db0415d6d5c635f72cb
Tested-by: syzbot+6db0415d6d5c635f72cb@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Link: https://patch.msgid.link/tencent_9AECE6CD2C7A826D902D696C289724E8120A@qq.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1877cc727 ]
nvme_fabrics creates an NVMe/FC controller in following path:
nvmf_dev_write()
-> nvmf_create_ctrl()
-> nvme_fc_create_ctrl()
-> nvme_fc_init_ctrl()
nvme_fc_init_ctrl() allocates the admin blk-mq resources right after
nvme_add_ctrl() succeeds. If any of the subsequent steps fail (changing
the controller state, scheduling connect work, etc.), we jump to the
fail_ctrl path, which tears down the controller references but never
frees the admin queue/tag set. The leaked blk-mq allocations match the
kmemleak report seen during blktests nvme/fc.
Check ctrl->ctrl.admin_tagset in the fail_ctrl path and call
nvme_remove_admin_tag_set() when it is set so that all admin queue
allocations are reclaimed whenever controller setup aborts.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22a507d768 ]
Even the device node don't exist, the graph_util_parse_link_direction()
will overwrite the playback_only and capture_only to be zero. Which
cause the playback_only and capture_only are not correct, so check device
node exist or not before update the value.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20251229090432.3964848-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b577d214f ]
The davinci_evm_probe() function calls of_parse_phandle() to acquire
device nodes for "ti,audio-codec" and "ti,mcasp-controller". These
functions return device nodes with incremented reference counts.
However, in several error paths (e.g., when the second of_parse_phandle(),
snd_soc_of_parse_card_name(), or devm_snd_soc_register_card() fails),
the function returns directly without releasing the acquired nodes,
leading to reference leaks.
This patch adds an error handling path 'err_put' to properly release
the device nodes using of_node_put() and clean up the pointers when
an error occurs.
Signed-off-by: Kery Qi <qikeyu2017@gmail.com>
Link: https://patch.msgid.link/20260107154836.1521-2-qikeyu2017@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a143545855 ]
Add proper locking in mmp_pdma_residue() to prevent use-after-free when
accessing descriptor list and descriptor contents.
The race occurs when multiple threads call tx_status() while the tasklet
on another CPU is freeing completed descriptors:
CPU 0 CPU 1
----- -----
mmp_pdma_tx_status()
mmp_pdma_residue()
-> NO LOCK held
list_for_each_entry(sw, ..)
DMA interrupt
dma_do_tasklet()
-> spin_lock(&desc_lock)
list_move(sw->node, ...)
spin_unlock(&desc_lock)
| dma_pool_free(sw) <- FREED!
-> access sw->desc <- UAF!
This issue can be reproduced when running dmatest on the same channel with
multiple threads (threads_per_chan > 1).
Fix by protecting the chain_running list iteration and descriptor access
with the chan->desc_lock spinlock.
Signed-off-by: Juan Li <lijuan@linux.spacemit.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://patch.msgid.link/20251216-mmp-pdma-race-v1-1-976a224bb622@riscstar.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12cacdfb02 ]
Add missing quirks for some new Dell laptops using cs42l43's speaker
outputs.
Signed-off-by: Deep Harsora <Deep_Harsora@dell.com>
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Link: https://patch.msgid.link/20260102152132.3053106-1-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a203dbeeca ]
In __sta_info_destroy_part2(), station statistics are requested after the
IEEE80211_STA_NONE -> IEEE80211_STA_NOTEXIST transition. This is
problematic because the driver may be unable to handle the request due to
the STA being in the NOTEXIST state (i.e. if the driver destroys the
underlying data when transitioning to NOTEXIST).
Move the statistics collection to before the state transition to avoid
this issue.
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251222-mac80211-move-station-stats-collection-earlier-v1-1-12cd4e42c633@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7f6629bff ]
I've acquired a Logitech MX Anywhere 3S mouse, which supports HID++ over
Bluetooth. Adding its PID 0xb037 to the allowlist enables the additional
features, such as high-resolution scrolling. Tested working across multiple
machines, with a mix of Intel and Mediatek Bluetooth chips.
[jkosina@suse.com: standardize shortlog]
Signed-off-by: Dennis Marttinen <twelho@welho.tech>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0d7f5f0c9 ]
If sbi_ecall.c's functions are traceable,
echo "__sbi_ecall:snapshot" > /sys/kernel/tracing/set_ftrace_filter
may get the kernel into a deadlock.
(Functions in sbi_ecall.c are excluded from tracing if
CONFIG_RISCV_ALTERNATIVE_EARLY is set.)
__sbi_ecall triggers a snapshot of the ringbuffer. The snapshot code
raises an IPI interrupt, which results in another call to __sbi_ecall
and another snapshot...
All it takes to get into this endless loop is one initial __sbi_ecall.
On RISC-V systems without SSTC extension, the clock events in
timer-riscv.c issue periodic sbi ecalls, making the problem easy to
trigger.
Always exclude the sbi_ecall.c functions from tracing to fix the
potential deadlock.
sbi ecalls can easiliy be logged via trace events, excluding ecall
functions from function tracing is not a big limitation.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://patch.msgid.link/20251223135043.1336524-1-martin@kaiser.cx
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6435ffd6c7 ]
When user resize all trace ring buffer through file 'buffer_size_kb',
then in ring_buffer_resize(), kernel allocates buffer pages for each
cpu in a loop.
If the kernel preemption model is PREEMPT_NONE and there are many cpus
and there are many buffer pages to be freed, it may not give up cpu
for a long time and finally cause a softlockup.
To avoid it, call cond_resched() after each cpu buffer free as Commit
f6bd2c9248 ("ring-buffer: Avoid softlockup in ring_buffer_resize()")
does.
Detailed call trace as follow:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 24-....: (14837 ticks this GP) idle=521c/1/0x4000000000000000 softirq=230597/230597 fqs=5329
rcu: (t=15004 jiffies g=26003221 q=211022 ncpus=96)
CPU: 24 UID: 0 PID: 11253 Comm: bash Kdump: loaded Tainted: G EL 6.18.2+ #278 NONE
pc : arch_local_irq_restore+0x8/0x20
arch_local_irq_restore+0x8/0x20 (P)
free_frozen_page_commit+0x28c/0x3b0
__free_frozen_pages+0x1c0/0x678
___free_pages+0xc0/0xe0
free_pages+0x3c/0x50
ring_buffer_resize.part.0+0x6a8/0x880
ring_buffer_resize+0x3c/0x58
__tracing_resize_ring_buffer.part.0+0x34/0xd8
tracing_resize_ring_buffer+0x8c/0xd0
tracing_entries_write+0x74/0xd8
vfs_write+0xcc/0x288
ksys_write+0x74/0x118
__arm64_sys_write+0x24/0x38
Cc: <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251228065008.2396573-1-mawupeng1@huawei.com
Signed-off-by: Wupeng Ma <mawupeng1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0de604d035 ]
During Mode 1 reset, the ASIC undergoes a reset cycle and becomes
temporarily inaccessible via PCIe. Any attempt to access MMIO registers
during this window (e.g., from interrupt handlers or other driver threads)
can result in uncompleted PCIe transactions, leading to NMI panics or
system hangs.
To prevent this, set the `no_hw_access` flag to true immediately after
triggering the reset. This signals other driver components to skip
register accesses while the device is offline.
A memory barrier `smp_mb()` is added to ensure the flag update is
globally visible to all cores before the driver enters the sleep/wait
state.
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7edb503fe4)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85a8668093 ]
The USB speaker has a bug that causes it to reboot when changing the
brightness using the physical knob.
Add a new vendor and product ID entry in hid-ids.h, and register
the corresponding device in hid-quirks.c with the required quirk.
Signed-off-by: Rodrigo Lugathe da Conceição Alves <lugathe2@gmail.com>
Reviewed-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2497ff38c5 ]
`i2c_hid_xfer` is used to read `recv_len + sizeof(__le16)` bytes of data
into `ihid->rawbuf`.
The former can come from the userspace in the hidraw driver and is only
bounded by HID_MAX_BUFFER_SIZE(16384) by default (unless we also set
`max_buffer_size` field of `struct hid_ll_driver` which we do not).
The latter has size determined at runtime by the maximum size of
different report types you could receive on any particular device and
can be a much smaller value.
Fix this by truncating `recv_len` to `ihid->bufsize - sizeof(__le16)`.
The impact is low since access to hidraw devices requires root.
Signed-off-by: Kwok Kin Ming <kenkinming2002@gmail.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c06bc35575 ]
Another Chicony Electronics HP 5MP Camera with USB ID 04F2:B882
reports a HID sensor interface that is not actually implemented.
Add the device to the HID ignore list so the bogus sensor is never
exposed to userspace. Then the system won't hang when runtime PM
tries to wake the unresponsive device.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f54a91f533 ]
After an innocuous optimization change in clang-22,
dml30_ModeSupportAndSystemConfigurationFull() is over the 2048 byte
stack limit for display_mode_vba_30.c.
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/display_mode_vba_30.c:3529:6: warning: stack frame size (2096) exceeds limit (2048) in 'dml30_ModeSupportAndSystemConfigurationFull' [-Wframe-larger-than]
3529 | void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
With clang-21, this function was already close to the limit:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/display_mode_vba_30.c:3529:6: warning: stack frame size (1912) exceeds limit (1586) in 'dml30_ModeSupportAndSystemConfigurationFull' [-Wframe-larger-than]
3529 | void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
| ^
CalculatePrefetchSchedule() has a large number of parameters, which must
be passed on the stack. Most of the parameters between the two callsites
are the same, so they can be accessed through the existing mode_lib
pointer, instead of being passed as explicit arguments. Doing this
reduces the stack size of dml30_ModeSupportAndSystemConfigurationFull()
from 2096 bytes to 1912 bytes with clang-22.
Closes: https://github.com/ClangBuiltLinux/linux/issues/2117
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b20b3fc421)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bafeb8d2f ]
The -EEXIST error code is reserved by the module loading infrastructure
to indicate that a module is already loaded. When a module's init
function returns -EEXIST, userspace tools like kmod interpret this as
"module already loaded" and treat the operation as successful, returning
0 to the user even though the module initialization actually failed.
Replace -EEXIST with -EBUSY to ensure correct error reporting in the module
initialization path.
Affected modules:
* ebtable_broute ebtable_filter ebtable_nat arptable_filter
* ip6table_filter ip6table_mangle ip6table_nat ip6table_raw
* ip6table_security iptable_filter iptable_mangle iptable_nat
* iptable_raw iptable_security
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cc13256b6 ]
Though I couldn't confirm ASPM L0s support with the Qcom hardware team, a
bug report from Dmitry suggests that L0s is broken on this legacy SoC.
Hence, remove L0s support from the Root Port Link Capabilities in this SoC.
Since qcom_pcie_clear_aspm_l0s() is now used by more than one SoC config,
call it from qcom_pcie_host_init() instead.
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Closes: https://lore.kernel.org/linux-pci/4cp5pzmlkkht2ni7us6p3edidnk25l45xrp6w3fxguqcvhq2id@wjqqrdpkypkf
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20251126081718.8239-1-mani@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ed7a28225 ]
HP Laptop 15s-eq1xxx with ALC236 codec does not enable the
mute LED automatically. This patch adds a quirk entry for
subsystem ID 0x8706 using the ALC236_FIXUP_HP_MUTE_LED_COEFBIT2
fixup, enabling correct mute LED behavior.
Signed-off-by: Ruslan Krupitsa <krupitsarus@outlook.com>
Link: https://patch.msgid.link/AS8P194MB112895B8EC2D87D53A876085BBBAA@AS8P194MB1128.EURP194.PROD.OUTLOOK.COM
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9efb74f84b ]
With Debian clang version 19.1.7 (3+build5) there are calls to
kasan_check_write() from __sev_es_nmi_complete(), which violates noinstr. Fix
it by disabling GCOV for the noinstr object, as has been done for previous
such instrumentation issues.
Note that this file already disables __SANITIZE_ADDRESS__ and
__SANITIZE_THREAD__, thus calls like kasan_check_write() ought to be nops
regardless of GCOV. This has been fixed in other patches. However, to avoid
any other accidental instrumentation showing up, (and since, in principle GCOV
is instrumentation and hence should be disabled for noinstr code anyway),
disable GCOV overall as well.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Marco Elver <elver@google.com>
Link: https://patch.msgid.link/20251216-gcov-inline-noinstr-v3-3-10244d154451@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9143268d2 ]
When a new PlayStation gamepad (DualShock 4 or DualSense) is initialized,
the input subsystem sets the default value for its absolute axes (e.g.,
ABS_X, ABS_Y) to 0.
However, the hardware's actual neutral/resting state for these joysticks
is 128 (0x80). This creates a mismatch.
When the first HID report arrives from the device, the driver sees the
resting value of 128. The kernel compares this to its initial state of 0
and incorrectly interprets this as a delta (0 -> 128). Consequently, it
generates EV_ABS events for this initial, non-existent movement.
This behavior can fail userspace 'sanity check' tests (e.g., in
Android CTS) that correctly assert no motion events should be generated
from a device that is already at rest.
This patch fixes the issue by explicitly setting the initial value of the
main joystick axes (e.g., ABS_X, ABS_Y, ABS_RX, ABS_RY) to 128 (0x80)
in the common ps_gamepad_create() function.
This aligns the kernel's initial state with the hardware's expected
neutral state, ensuring that the first report (at 128) produces no
delta and thus, no spurious event.
Signed-off-by: Siarhei Vishniakou <svv@google.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56e230723e ]
Some systems have enabled ISH without any sensors. In this case sending
HOSTIF_DM_ENUM_DEVICES results in 0 sensors. This triggers ISH hardware
reset on subsequent enumeration after S3/S4 resume.
The enum_devices_done flag was not reset before sending the
HOSTIF_DM_ENUM_DEVICES command. On subsequent enumeration calls (such as
after S3/S4 resume), this flag retains its previous true value, causing the
wait loop to be skipped and returning prematurely to hid_ishtp_cl_init().
If 0 HID devices are found, hid_ishtp_cl_init() skips getting HID device
descriptors and sets init_done to true. When the delayed enumeration
response arrives with init_done already true, the driver treats it as a bad
packet and triggers an ISH hardware reset.
Set enum_devices_done to false before sending the enumeration command,
consistent with similar functions like ishtp_get_hid_descriptor() and
ishtp_get_report_descriptor() which reset their respective flags.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25fd7ee7bf ]
The syscall number is a user-controlled value used to index into the
syscall table. Use array_index_nospec() to clamp this value after the
bounds check to prevent speculative out-of-bounds access and subsequent
data leakage via cache side channels.
Signed-off-by: Lukas Gerlach <lukas.gerlach@cispa.de>
Link: https://patch.msgid.link/20251218191332.35849-3-lukas.gerlach@cispa.de
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1c050f92d ]
If we fail to allocate a path or join a transaction, we return from
__cow_file_range_inline() without freeing the reserved qgroup data,
resulting in a leak. Fix this by ensuring we call btrfs_qgroup_free_data()
in such cases.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit daeed86b68 ]
The ishtp_cl_bus_match() function previously only checked the first entry
in the driver's device ID table. Update it to iterate over the entire
table, allowing proper matching for drivers with multiple supported
protocol GUIDs.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8da41de0b ]
If we fail to create an inline extent due to -ENOSPC, we will attempt to
go through the normal COW path, reserve an extent, create an ordered
extent, etc. However we were always freeing the reserved qgroup data,
which is wrong since we will use data. Fix this by freeing the reserved
qgroup data in __cow_file_range_inline() only if we are not doing the
fallback (ret is <= 0).
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3296c3012a ]
When the command is a replay operation and -ENOEXEC is returned,
the refcount of ksmbd_file must be released.
Signed-off-by: ZhangGuoDong <zhangguodong@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9bdc1ab5e4 ]
This patch allows the LoongArch BPF JIT to handle recoverable memory
access errors generated by BPF_PROBE_MEM* instructions.
When a BPF program performs memory access operations, the instructions
it executes may trigger ADEM exceptions. The kernel’s built-in BPF
exception table mechanism (EX_TYPE_BPF) will generate corresponding
exception fixup entries in the JIT compilation phase; however, the
architecture-specific trap handling function needs to proactively call
the common fixup routine to achieve exception recovery.
do_ade(): fix EX_TYPE_BPF memory access exceptions for BPF programs,
ensure safe execution.
Relevant test cases: illegal address access tests in module_attach and
subprogs_extable of selftests/bpf.
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc5ff25009 ]
Allocate the overflowing CQE with GFP_NOWAIT instead of GFP_ATOMIC. This
changes causes allocations to fail earlier in out-of-memory situations,
rather than being deferred. Using GFP_ATOMIC allows a process to exceed
memory limits.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220794
Signed-off-by: Alexandre Negrel <alexandre@negrel.dev>
Link: https://lore.kernel.org/io-uring/20251229201933.515797-1-alexandre@negrel.dev/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cc583653b ]
In raid1_reshape(), freeze_array() is called before modifying the r1bio
memory pool (conf->r1bio_pool) and conf->raid_disks, and
unfreeze_array() is called after the update is completed.
However, freeze_array() only waits until nr_sync_pending and
(nr_pending - nr_queued) of all buckets reaches zero. When an I/O error
occurs, nr_queued is increased and the corresponding r1bio is queued to
either retry_list or bio_end_io_list. As a result, freeze_array() may
unblock before these r1bios are released.
This can lead to a situation where conf->raid_disks and the mempool have
already been updated while queued r1bios, allocated with the old
raid_disks value, are later released. Consequently, free_r1bio() may
access memory out of bounds in put_all_bios() and release r1bios of the
wrong size to the new mempool, potentially causing issues with the
mempool as well.
Since only normal I/O might increase nr_queued while an I/O error occurs,
suspending the array avoids this issue.
Note: Updating raid_disks via ioctl SET_ARRAY_INFO already suspends
the array. Therefore, we suspend the array when updating raid_disks
via sysfs to avoid this issue too.
Signed-off-by: FengWei Shih <dannyshih@synology.com>
Link: https://lore.kernel.org/linux-raid/20251226101816.4506-1-dannyshih@synology.com
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5be446948 ]
For 32BIT platform _PAGE_PROTNONE is 0, so set a VMA to be VM_NONE or
VM_SHARED will make pages non-present, then cause Oops with kernel page
fault.
Fix it by set correct protection_map[] for VM_NONE/VM_SHARED, replacing
_PAGE_PROTNONE with _PAGE_PRESENT.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04bdb1a04d ]
Route bfqg_stats_add_aux() time accumulation into the destination
stats object instead of the source, aligning with other stat fields.
Reviewed-by: Yu Kuai <yukuai@fnnas.com>
Signed-off-by: shechenglong <shechenglong@xfusion.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81d90d93d2 ]
Since commit dfb073d32c ("ptp: Return -EINVAL on ptp_clock_register if
required ops are NULL"), PTP clock registered through ptp_clock_register
is required to have ptp_clock_info.settime64 set, however, neither MVM
nor MLD's PTP clock implementation sets it, resulting in warnings when
the interface starts up, like
WARNING: drivers/ptp/ptp_clock.c:325 at ptp_clock_register+0x2c8/0x6b8, CPU#1: wpa_supplicant/469
CPU: 1 UID: 0 PID: 469 Comm: wpa_supplicant Not tainted 6.18.0+ #101 PREEMPT(full)
ra: ffff800002732cd4 iwl_mvm_ptp_init+0x114/0x188 [iwlmvm]
ERA: 9000000002fdc468 ptp_clock_register+0x2c8/0x6b8
iwlwifi 0000:01:00.0: Failed to register PHC clock (-22)
I don't find an appropriate firmware interface to implement settime64()
for iwlwifi MLD/MVM, thus instead create a stub that returns
-EOPTNOTSUPP only, suppressing the warning and allowing the PTP clock to
be registered.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/20251108044822.GA3262936@ax162/
Signed-off-by: Yao Zi <ziyao@disroot.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
tested-by: damian Tometzki damian@riscv-rocks.de
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251204123204.9316-1-ziyao@disroot.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99067b58a4 ]
It's not clear (to me) how exactly syzbot managed to hit this,
but it seems conceivable that e.g. regulatory changed and has
disabled a channel between scanning (channel is checked to be
usable by cfg80211_get_ies_channel_number) and connecting on
the channel later.
With one scenario that isn't covered elsewhere described above,
the warning isn't good, replace it with a (more informative)
error message.
Reported-by: syzbot+639af5aa411f2581ad38@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20251202102511.5a8fb5184fa3.I961ee41b8f10538a54b8565dbf03ec1696e80e03@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
