Yet again our current confusion between doing the modeset globally,
but only having the new parameters for one crtc at a time.
So that intel_set_mode essentially already does a global modeset:
intel_modeset_affected_pipes compares the current state with where we
want to go to (which is carefully set up by intel_crtc_set_config) and
then goes through the modeset sequence for any crtc which needs
updating.
Now the issue is that the actual interface with the remaining code
still only works on one crtc, and so we only pass in one fb and one
mode. In intel_set_mode we also only compute one intel_crtc_config
(which should be the one for the crtc we're doing a modeset on).
The reason for that mismatch is twofold:
- We want to eventually do all modeset as global state changes, so
it's just infrastructure prep.
- But even the old semantics can change more than one crtc when you
e.g. move a connector from crtc A to crtc B, then both crtc A and B
need to be updated. Usually that means one pipe is disabled and the
other enabled. This is also the reason why the hack doesn't touch the
disable_pipes mask.
Now hilarity ensued in our kms config restore paths when we actually
try to do a modeset on all crtcs: If the first crtc should be off and
the second should be on, then the call on the first crtc will notice
that the 2nd one should be switched on and so tries to compute the
pipe_config. But due to a lack of passed-in fb (crtc 1 should be off
after all) it only results in tears.
This case is ridiculously easy to hit on gen2/3 where the lvds output
is restricted to pipe B. Note that before the pipe_config bpp rework
gen2/3 didn't care really about the fb->depth, so this is a regression
brought to light with
commit 4e53c2e010
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Mar 27 00:44:58 2013 +0100
drm/i915: precompute pipe bpp before touching the hw
But apparently Ajax also managed to blow up pch platforms, probably
with some randomized configs, and pch platforms trip up over the lack
of an fb even in the old code. So this actually goes back to the first
introduction of the new modeset restore code in
commit 45e2b5f640
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Fri Nov 23 18:16:34 2012 +0100
drm/i915: force restore on lid open
Fix this mess by now by justing shunting all the cool new global
modeset logic in intel_modeset_affected_pipes.
v2: Improve commit message and clean up all the comments in
intel_modeset_affected_pipes - since the introduction of the modeset
restore code they've been a bit outdated.
Bugzill: https://bugzilla.redhat.com/show_bug.cgi?id=917725
Cc: stable@vger.kernel.org
References: http://www.mail-archive.com/stable@vger.kernel.org/msg38084.html
Tested-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Backlight cleanup in the eDP connector destroy callback caused the
backlight device to be removed on some systems that first initialized LVDS
and then attempted to initialize eDP. Prevent multiple backlight
initializations, and ensure backlight cleanup is only done once by moving
it to modeset cleanup.
A small wrinkle is the introduced asymmetry in backlight
setup/cleanup. This could be solved by adding refcounting, but it seems
overkill considering that there should only ever be one backlight device.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=55701
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Peter Verthez <peter.verthez@skynet.be>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This solves some "unclaimed register" messages when booting the
machine with eDP attached.
V2: Rebase and add the comment requested by Daniel.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It returns true if we've requested to turn the power well on and it's
really on. It also returns true for all the previous gens.
For now there's just one caller, but I'm going to add more.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It will be only consistent once we've restored all the crtcs. Since a
bunch of other callers also want to just restore a single crtc, add a
boolean to disable checking only where it doesn't make sense.
Note that intel_modeset_setup_hw_state already has a call to
intel_modeset_check_state at the end, so we don't reduce the amount of
checking.
v2: Try harder not to create a big patch (Chris).
v3: Even smaller (still Chris). Also fix a trailing space.
References: https://lkml.org/lkml/2013/3/16/60
Cc: Tomas Melin <tomas.melin@iki.fi>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Tomas Melin <tomas.melin@iki.fi>
Tested-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Increase the number of fence registers to 32 on IVB/HSW. VLV however
only has 16 fence registers according to the docs.
Increasing the number of fences was attempted before [1], but there was
some uncertainty about the maximum CPU fence number for FBC. Since then
BSpec has been updated to state that there are in fact 32 fence registers,
and the CPU fence number field in the SNB_DPFC_CTL_SA register is 5 bits,
and the CPU fence number field in the ILK_DPFC_CONTROL register must be
zero. So now it all makes sense.
[1] http://lists.freedesktop.org/archives/intel-gfx/2011-October/012865.html
v2: Include some background information based on the previous attempt
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit 4f9b2fe0441d4bdf5666a306156b5d6755de2584
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Fri Apr 5 14:29:22 2013 -0700
drm/i915: Better overclock support
changed the sysfs read semantics for 'gt_max_freq_mhz'. By
always returning overclock max instead of stored value.
Fix this by returning the stored value. Separate sysfs entry
should be considered for overclocking max freq.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63415
Cc: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
BSpec contains several scattered notes which state that the maximum
fence stride was increased to 256KB on IVB.
Testing on real hardware agrees.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Our checks for an invalid fence stride forgot to guard against
zero stride on gen4+. Fix it.
v2: Avoid duplicated code (danvet)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
IVB and HSW use different encodings for the PPGTT cacheability bits in
the GAM_ECOCHK register.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
According to BSpec GAC_ECO_BITS register exists on Gen7 platforms as
well. Configure it accordingly.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
GAC_ECO_BITS has a bit similar to GAM_ECOCHK's ECOCHK_SNB_BIT. Add
the define, and enable it on SNB.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Requested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Most importantly this will allow users to set overclock frequencies in
sysfs. Previously the max was limited by the RP0 max as opposed to the
overclock max. This is useful if one wants to either limit the max
overclock frequency, or set the minimum frequency to be in the overclock
range. It also fixes an issue where if one sets the max frequency to be
below the overclock max, they wouldn't be able to set back the proper
overclock max.
In addition I've added a couple of other bits:
Show the overclock freq. as max in sysfs
Print the overclock max in debugfs.
Print a warning if the user sets the min frequency to be in the
overclock range.
In this patch I've decided to store the hw_max when we read it from the
pcode at init. The reason I do this is the pcode reads can fail, and are
slow.
v2: Report when user requested overclocked max (Daniel)
Remove when user sets min to overclock range (Daniel)
Reported-by: freezer from #intel-gfx on irc
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
[danvet: Fixup the s/100MHz/50MHz/ confusion in an unrelated comment
that Mika spotted.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Workaround to avoid intermittent aux channel failures, per spec change.
v2: Don't mess with cpu dp aux divider (Paulo Zanoni)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Kill spurious tab spotted by Paulo.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
I'm really not happy that we have to support this, but this will be the
simplest way to handle cases where PPGTT init can fail, which I promise
will be coming in the future.
v2: Resolve conflicts due to patch series reordering.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This will allow us to carry on if we've cleaned up the PPGTT. The usage
for this is coming up - it simplifies handling a failed PPGTT init.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Spill the secrets about failing ppgtt init.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since we've already set up a nice vtable to abstract other PPGTT
functions, also abstract the actual register programming to enable
things.
This function will probably need to change a bit as we implement real
processes.
v2: Resolve conflicts due to patch series reordering.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This rework will help if future platforms choose to be a bit different.
Should have no functional impact.
v2: Don't move around the vtable setup (Daniel)
v3: Squash in the disable-by-default patch.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
It only works that way on GEN6 and GEN7. Let's not assume GENn will be
the same.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The PPGTT scratch page is used for all gens, and doing it in the global
part of our PPGTT setup makes the code a bit nicer.
This was in a patch submitted earlier as part of the PPGTT cleanups.
Grumpy maintainer must have missed it, and I didn't yell when
appropriate. Apologies for everyone :-)
v2: Update commit message
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
There used to be other fixes in this patch but they've slowly disappeared as
other parts have been fixed.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This will allow us to read/write registers in GTT init.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Fix up error handling. We really should look into devres for
this stuff ...]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
We can assume that the PTE layout, and size changes for future
generations. To avoid confusion with the existing GEN6 PTE typedef, give
it a GEN6_ prefix.
v2: Fixup checkpatch warning and bikeshed commit message slightly.
v3: Rebase on top of Imre's for_each_sg_pages rework.
v4: Fixup conflicts in patch series reordering.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
All gen6+ parts so far have 1 BAR which holds both the register space
and the GTT PTEs. Up until now, that was a 4MB BAR with half allocated
to each.
I have a strong hunch (wink, nod, wink) that future gens will also keep
a similar 50-50 split though the sizes may change. To help this along
change the code to obey the rule of half the total size instead of a
hard-coded 2MB.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Enabling context support increases SwapBuffers latency by about 20%
(measured on an i7-3720qm). We can offset that loss slightly by enabling
faster caching for the contexts. As they are not backed by any
particular cache (such as the sampler or render caches) our only option
is to select the generic mid-level cache. This reduces the latency of
the swap by about 5%.
Oddly this effect can be observed running smokin-guns on IVB at
1280x1024:
Using BLT copies for swaps: 151.67 fps
Using Render copies for swaps (unpatched): 141.70 fps
With contexts disabled: 150.23 fps
With contexts in L3$: 150.77 fps
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bspec has been been updated and dropped these two changes for non-sdv
LPT PCHs.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In order to fully serialize access to the fenced region and the update
to the fence register we need to take extreme measures on SNB+, and
manually flush writes to memory prior to writing the fence register in
conjunction with the memory barriers placed around the register write.
Fixes i-g-t/gem_fence_thrash
v2: Bring a bigger gun
v3: Switch the bigger gun for heavier bullets (Arjan van de Ven)
v4: Remove changes for working generations.
v5: Reduce to a per-cpu wbinvd() call prior to updating the fences.
v6: Rewrite comments to ellide forgotten history.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62191
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Tested-by: Jon Bloomfield <jon.bloomfield@intel.com> (v2)
Cc: stable@vger.kernel.org
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Userspace can easily hit this and does since Ville added a new evil
igt testcase in:
commit 069e35e0fc3785faa562adcfd2dd7bbed4cb1dea
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Mon Mar 4 15:34:06 2013 +0200
kms_flip: Add flip-vs-bad-tiling test
v2: Fix the spelling in the added comment (Chris).
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63246
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since the ratio is different, we also need to pass in the parameters
for the reduced clock. Might or might not reduce flicker for the
auto-downclocking on lvds/eDP.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Only on IBX should we set the limiting factor to 25 unconditionally
for dual-channel mode, on CPT/PPT 25 only applies when the lvds
refclock is 100MHz.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit de13a2e3f8
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date: Thu Sep 20 18:36:05 2012 -0300
drm/i915: extract compute_dpll from ironlake_crtc_mode_set
missed the subtle adjustment of the FP1 register. Fix this up by
passing a pointer around instead of the value.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The connector associated with the encoder is considered active when the
output associtated with this connector is active on the encoder. The
encoder itself is considered active when either there is an active
output on it or the respective SDVO channel is active.
Having active outputs when the SDVO channel is inactive seems to be
inconsistent: such states can be found when intel_modeset_setup_hw_state()
collects the hardware state set by the BIOS.
This inconsistency will be fixed in intel_sanitize_crtc()
(when intel_crtc_update_dpms() is called), this however only happens
when the encoder is associated with a crtc.
This patch also reverts:
commit bd6946e87a
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Apr 2 21:30:34 2013 +0200
drm/i915: Fix sdvo connector get_hw_state function
Signed-off-by: Egbert Eich <eich@suse.de>
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63031
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This set of patches enables remoteproc support
on DA850 EVM and fixes some sparse warnings for
the same board.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=U9X8
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v3.10/board-2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/boards
From Sekhar Nori:
v3.10 board updates for DaVinci
This set of patches enables remoteproc support
on DA850 EVM and fixes some sparse warnings for
the same board.
* tag 'davinci-for-v3.10/board-2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: da850 evm: fix const qualifier placement
ARM: davinci: da850 board: add remoteproc support
ARM: davinci: ensure global variables are declared
ARM: davinci: sram.c: fix incorrect type in assignment
ARM: davinci: da8xx dt: make file local symbols static
ARM: davinci: da8xx: add remoteproc support
ARM: davinci: remove test for undefined Kconfig macro
ARM: davinci: mmc: derive version information from device name
ARM: davinci: da850: add ECAP & EHRPWM clock nodes
ARM: davinci: clk framework support for enable/disable functionality
This set of patches add support for remoteproc
used to control the DSP and also fix sparse
errors existing for quite some time.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iQIcBAABAgAGBQJRbtTBAAoJEGFBu2jqvgRNcY0P/0x7dNvJqCOCe/AY2BUYSkD9
jnYXAiLNL9BdkJ1jrE2cpfagwc/kMmW6B5e+LLcNiS/u2vO7G8JaUtNLHtcX/k7f
1lresoSp95mIzHdW15DGBOcHkq8llQsI2hp8tmG50NN0OMWSOK9K3nwZtQl9CEPd
5Jqs4yU+7mJzYXcttmF8TWOlqH1JHjmqD83REdWxprSHmGr4VHnthu1FpFQc0e4v
LNNmRslCZEvPJn49sv3joyXbTMxLAcsW5PkghDPS0r0nBIHr5/l3XzyvTI+Z3EMU
fSBsvrfugP00LAiC1kTJD8FI5UQKTBN+zIlx6XVFJKcMCPpT9U5Fk4rxaqhA3prv
wTo0EJ7Y4Zby7uwr64R5Fwfit42X6CwbJHQH3X5fOxPaI//5QKXdPjNC3LYl36uh
K92JqXPmg8kVudfKW8qnGgNkYIuyWDLz1B09ztmcucZBPszw/2kfALADVtA/Fb25
OeSHXrKqtcqhsdwsCAgTvhylTmolkhcqAyc6krRdY/Gco8rHfUP/L03jvpSy+Mls
T1splMzLeHCHTmDyTy8fsANtmggYLxwiVFkqX8ig9VZiMwhpZk1YdAC+B/KzZ04G
PNEFMdx+sba5rZrM+wUIrmyVNEPkvvMcv6ppDDk/QEaBpWRIcyrM1E4T+RJaIOfu
v/ojsO+W9wE+CR3u76GE
=ldiG
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v3.10/soc-2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc
From Sekhar Nori:
v3.10 SoC updates for DaVinci
This set of patches add support for remoteproc
used to control the DSP and also fix sparse
errors existing for quite some time.
* tag 'davinci-for-v3.10/soc-2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: ensure global variables are declared
ARM: davinci: sram.c: fix incorrect type in assignment
ARM: davinci: da8xx dt: make file local symbols static
ARM: davinci: da8xx: add remoteproc support
Signed-off-by: Olof Johansson <olof@lixom.net>
This set of patches adds support for PWMs and SPI
controller present on DA850 and for SPI flash present on
DA850 EVM.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=KZ+c
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v3.10/dt-2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt2
From Sekhar Nori:
v3.10 DT updates for DaVinci
This set of patches adds support for PWMs and SPI
controller present on DA850 and for SPI flash present on
DA850 EVM.
* tag 'davinci-for-v3.10/dt-2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: da850-evm: add SPI flash support
ARM: davinci: da850: override SPI DT node device name
ARM: davinci: da850: add SPI1 DT node
spi/davinci: add DT binding documentation
spi/davinci: no wildcards in DT compatible property
ARM: davinci: da850: add EHRPWM & ECAP DT node
ARM: davinci: da850: override mmc DT node device name
ARM: davinci: da850: add mmc DT entries
mmc: davinci_mmc: add DT support
ARM: davinci: da850: add tps6507x regulator DT data
ARM: regulator: add tps6507x device tree data
ARM: davinci: remove test for undefined Kconfig macro
ARM: davinci: mmc: derive version information from device name
ARM: davinci: da850: add ECAP & EHRPWM clock nodes
ARM: davinci: clk framework support for enable/disable functionality
Signed-off-by: Olof Johansson <olof@lixom.net>
- move the armada irqchip driver to drivers/irqchip/
Note:
- I asked tglx if it was ok to take this series on 10 Apr due to it's complex
dependencies. 5+ days have passed with no objection.
- I put this driver in a separate mvebu branch in case tglx or others object,
it can be dropped with minimal impact to other work.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJRbFiZAAoJEAi3KVZQDZAevf4IAJr33UAWcF1CpNMqrQCJCfem
0uK4WHhE7djgqoypR2zIceCmfbkFwwQAsi9tHob+NOnWLnRTdTDHiU+ICcTaYEuK
s0zkibnLnDmupDfNpw/h2UNLXsGhYt6uXkNMt36yKV2V7/q9mscZ4ztPd9/vA6N/
glU2w9MxQiQSg4lGunNQa6zeMz1BB5oXmbAefAiDS6IjiGrajepd+PyIl+Ewq+RH
KFnbAcYpc/Cc+8ANfDvY7IMSN2K5zfSTECbqizlCwfIUI7GP/p050OjJdB7eUz77
D8nv4PtXS4TOzAjE1UgY1NRKmHyyt5o/GZR2euu1Q3hqFV2Pb5sHw06P6R383IA=
=/Fuw
-----END PGP SIGNATURE-----
Merge tag 'irqchip-3.10' of git://git.infradead.org/users/jcooper/linux into late/cleanup
From Jason Cooper:
mvebu driver irqchip for v3.10
- move the armada irqchip driver to drivers/irqchip/
* tag 'irqchip-3.10' of git://git.infradead.org/users/jcooper/linux:
irqchip: armada-370-xp: slightly cleanup irq controller driver
irqchip: armada-370-xp: move IRQ handler to avoid forward declaration
irqchip: move IRQ driver for Armada 370/XP
ARM: mvebu: move L2 cache initialization in init_early()
Signed-off-by: Olof Johansson <olof@lixom.net>
- mvebu LPAE 64bit dts file changes
Depends:
- mvebu/fixes (tags/mvebu_fixes_for_v3.9_round3)
- mvebu/soc (tags/soc_for_v3.10)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJRbB+VAAoJEAi3KVZQDZAeYr0H/Riys8iJYfdRghRdHVP4rsop
9twK0pLD0z87f+N1VHODqbNAzP5DiH1H5j9owhDEMhJ5i+niQxDs7aaxGqpulg0R
gZCvakxi9Eiaq7GS0J170Hvo3C1Q1M23t3ZKFMCU8BNjTV5sqb8bq0IA0EssDbqb
7OqsO2j3iMIZOB9Ueoaazb6YRyCa6I1zgSY18TM5uUfUrvBhfBNCgEpE2pu3H682
EcjEqp2MTEZChihwzv8fFn9j22pXuaD3IJQVlZn23Jfr/5y6K7I+zGUBGQesWdEb
fdC2i7oDBobkOtgEJ9bCw2x6NJQ2KK5NKm3hdNgOg7nBkKRAcebh00DtBjtwYow=
=ErMD
-----END PGP SIGNATURE-----
Merge tag 'dt-3.10-4' of git://git.infradead.org/users/jcooper/linux into next/dt2
From Jason Cooper:
mvebu dt for v3.10 round 4
- mvebu LPAE 64bit dts file changes
* tag 'dt-3.10-4' of git://git.infradead.org/users/jcooper/linux: (52 commits)
ARM: dts: mvebu: Convert mvebu device tree files to 64 bits
ARM: dts: mvebu: introduce internal-regs node
ARM: dts: mvebu: Convert all the mvebu files to use the range property
ARM: dts: mvebu: move all peripherals inside soc
ARM: dts: mvebu: fix cpus section indentation
arm: mvebu: PCIe Device Tree informations for Armada XP GP
arm: mvebu: PCIe Device Tree informations for Armada 370 DB
arm: mvebu: PCIe Device Tree informations for Armada 370 Mirabox
arm: mvebu: PCIe Device Tree informations for Armada XP DB
arm: mvebu: PCIe Device Tree informations for OpenBlocks AX3-4
arm: mvebu: add PCIe Device Tree informations for Armada XP
arm: mvebu: add PCIe Device Tree informations for Armada 370
ARM: mvebu: Align the internal registers virtual base to support LPAE
ARM: mvebu: Limit the DMA zone when LPAE is selected
arm: plat-orion: remove addr-map code
arm: mach-mv78xx0: convert to use the mvebu-mbus driver
arm: mach-orion5x: convert to use mvebu-mbus driver
arm: mach-dove: convert to use mvebu-mbus driver
arm: mach-kirkwood: convert to use mvebu-mbus driver
arm: mach-mvebu: convert to use mvebu-mbus driver
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- mvebu PCIe DT support
from round 2 (no pr was sent):
- 64bit dts skeleton
- mvebu devicebus additions
- mvebu thermal nodes
- mirabox gpio leds
- orion5x xor and ehci
- use mvsdio on guruplug dt
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJRbEtPAAoJEAi3KVZQDZAetzwH/1POQqgPrAbK/mOkQN11StLN
Vd3I+QcA1x5GrYSwZ13HGCVoc/7ZXKBveNsKudH5lYXp1cRXQjKFz0DF4Pp+jo7S
LII7u566sg7ZjaPWBSkyh3WA2HNK4lzAXwWa+DfrDDlwRNNVBkCGQ8MlP5d22NYF
SRQLAyDo2czD0ARocoG8jLJ3tKXcxMAtfDzUSw29tsAky+IWp8eYD6xPvQusY4L1
5Wp/Y3Sjixg87Ktcj8u6fd8scvhoP+Y4gcsx/OOfYRxS/iE+ApwQKoHYnbL1xoZB
PbRaXsitZJDMoXnSMfa2ZuW3IEfKML88a64tTR1jVhvYK+/wwEwa2v84PqAiOrY=
=huPy
-----END PGP SIGNATURE-----
Merge tag 'dt-3.10-3' of git://git.infradead.org/users/jcooper/linux into next/dt
From Jason Cooper:
mvebu dt for v3.10 round 3
- mvebu PCIe DT support
from round 2 (no pr was sent):
- 64bit dts skeleton
- mvebu devicebus additions
- mvebu thermal nodes
- mirabox gpio leds
- orion5x xor and ehci
- use mvsdio on guruplug dt
* tag 'dt-3.10-3' of git://git.infradead.org/users/jcooper/linux:
arm: mvebu: PCIe Device Tree informations for Armada XP GP
arm: mvebu: PCIe Device Tree informations for Armada 370 DB
arm: mvebu: PCIe Device Tree informations for Armada 370 Mirabox
arm: mvebu: PCIe Device Tree informations for Armada XP DB
arm: mvebu: PCIe Device Tree informations for OpenBlocks AX3-4
arm: mvebu: add PCIe Device Tree informations for Armada XP
arm: mvebu: add PCIe Device Tree informations for Armada 370
ARM: dts: Add a 64 bits version of the skeleton device tree
ARM: mvebu: Add Device Bus and CFI flash memory support to defconfig
ARM: mvebu: Add support for NOR flash device on Openblocks AX3 board
ARM: mvebu: Add support for NOR flash device on Armada XP-GP board
ARM: mvebu: Add Device Bus support for Armada 370/XP SoC
ARM: configs: Update mvebu defconfig for thermal
ARM: mvebu: Add thermal support to Armada 370 device tree
ARM: mvebu: Add thermal support to Armada XP device tree
arm: mvebu: Add GPIO LEDs to Mirabox board
arm: orion5x: enable xor for orion5x platform
arm: orion5x: add ehci bindings to dtsi
ARM: kirkwood: make use of DT mvsdio on guruplug board
ARM: mvebu: Add button on Armada 370 Reference Design board
Move the logic trying to insert hpte in __hash_page_huge() to an helper
function, so it could also be used by others.
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
It seems that new_pte and rflags don't get changed in the repeating loop, so
move their assignment out of the loop.
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Add a PCI quirk for VGA devices on Power to set the default VGA device.
Ensures a default VGA is always set if a graphics adapter is present,
even if firmware did not initialize it. If more than one graphics
adapter is present, ensure the one initialized by firmware is set
as the default VGA device. This ensures that X autoconfiguration
will work.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Set dev->dev.type in alloc_pci_dev so that archs that have their own
versions of pci_setup_device get this set properly in order to ensure
things like the boot_vga sysfs parameter get created as expected.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Powerpc initializes the DMA and IRQ information in pci_scan_child_bus()->
pcibios_fixup_bus()->pcibios_setup_bus_devices(). But for the devices
which are hotpluged, bus->is added has been set for the first scan of the
PCI-e bus, so the initialization code won't be called. Then the hotpluged
devices' driver will fail to load.
For example :
The PCI-e device 0001:03:00.0 is the Intel PCI-e e1000e network card, remove
it from the system:
# echo 1 > /sys/bus/pci/devices/0001\:03\:00.0/remove
# e1000e 0001:03:00.0 eth0: removed PHC
Rescan it from it's bus:
# echo 1 > /sys/bus/pci/devices/0001\:02\:00.0/rescan
...
e1000e 0001:03:00.0: Disabling ASPM L0s L1
e1000e 0001:03:00.0: No usable DMA configuration, aborting
e1000e: probe of 0001:03:00.0 failed with error -5
So we move the DMA & IRQ initialization code from pcibios_setup_devices() and
construct a new function pcibios_enable_device. We call this function in
pcibios_enable_device, which will be called by PCI-e rescan code. At the
meanwhile, we avoid the the impact on cardbus. I also validate this patch with
silicon's PCIe-sata which encounters the IRQ issue.
Signed-off-by: Yuanquan Chen <Yuanquan.Chen@freescale.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hiroo Matsumoto <matsumoto.hiroo@jp.fujitsu.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
This function has always been marked as __cpuinit, but is only called
from functions marked as __init and references an __initdata variable.
So change its annotation to __init.
Fixes this build warning:
WARNING: arch/powerpc/mm/built-in.o(.cpuinit.text+0x86): Section mismatch in reference from the function .fake_numa_create_new_node() to the variable .init.data:cmdline
The function __cpuinit .fake_numa_create_new_node() references
a variable __initdata cmdline.
If cmdline is only used by .fake_numa_create_new_node then
annotate cmdline with a matching annotation.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
The following commit breaks numa distance setup for old powerpc
systems that use form0 encoding in device tree.
commit 41eab6f88f
powerpc/numa: Use form 1 affinity to setup node distance
Device tree node /rtas/ibm,associativity-reference-points would
index into /cpus/PowerPCxxxx/ibm,associativity based on form0 or
form1 encoding detected by ibm,architecture-vec-5 property.
All modern systems use form1 and current kernel code is correct.
However, on older systems with form0 encoding, the numa distance
will get hard coded as LOCAL_DISTANCE for all nodes. This causes
task scheduling anomaly since scheduler will skip building numa
level domain (topmost domain with all cpus) if all numa distances
are same. (value of 'level' in sched_init_numa() will remain 0)
Prior to the above commit:
((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE)
Restoring compatible behavior with this patch for old powerpc systems
with device tree where numa distance are encoded as form0.
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
This adds new debug feature information so that the DAWR can be
identified by userspace tools like GDB.
Unfortunately the DAWR doesn't sit nicely into the current description
that ptrace provides to userspace via struct ppc_debug_info. It doesn't
allow for specifying that only some ranges are possible or even the end
alignment constraints (DAWR only allows 512 byte wide ranges which can't
cross a 512 byte boundary).
After talking to Edjunior Machado (GDB ppc developer), it was decided
this was the best approach. Just mark it as debug feature DAWR and
tools like GDB can internally decide the constraints.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
This patch adds a new line to /proc/interrupts to account for the
doorbell interrupts that each hardware thread has received. The total
interrupt count in /proc/stat will now also include doorbells.
# cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
16: 551 1267 281 175 XICS Level IPI
LOC: 2037 1503 1688 1625 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
CNT: 0 0 0 0 Performance monitoring interrupts
MCE: 0 0 0 0 Machine check exceptions
DBL: 42 550 20 91 Doorbell interrupts
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
