Commit graph

388,156 commits

Author SHA1 Message Date
Eldad Zack
f9d3543591 ALSA: usb-audio: neaten MODULE_DEVICE_TABLE placement
Minor style fix, following a general code style in the kernel.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-04 08:30:18 +02:00
Eldad Zack
88766f04c4 ALSA: usb-audio: convert list_for_each to entry variant
Change occurances of list_for_each into list_for_each_entry where
applicable.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-04 08:30:06 +02:00
Doug Anderson
d8acac566c clocksource: mct: Add missing semicolons in exynos_mct.c
The CLOCKSOURCE_OF_DECLARE lines were added without a semicolon at the
end.  On my system this causes a compile-time error that looks like:

drivers/clocksource/exynos_mct.c:557:202: warning: comparison of distinct pointer types lacks a cast [enabled by default]
drivers/clocksource/exynos_mct.c:558:1: error: expected ',' or ';' before 'static'

The error didn't show up till now because there was an extra semicolon
at end of the CLOCKSOURCE_OF_DECLARE definition that was removed by
Arnd Bergmann in "clocksource: make CLOCKSOURCE_OF_DECLARE type safe"

Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04 15:24:32 +09:00
Charles Keepax
1fa86dcfea ARM: S3C64XX: Slow down mic detection rate for wm5102
A slightly slower rate provides more reliable jack detection during
slower insertions.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04 15:17:14 +09:00
Charles Keepax
f6281dbe4a ARM: S3C64XX: Clear DMA flags on channel request
This patch clears the DMA flags when a DMA channel is requested. This is
necessary because otherwise the channel may inherit incompatible
settings from its last usage.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04 15:17:09 +09:00
Jonathan Kliegman
8521420375 ARM: EXYNOS: Clear ENABLE_WAKEUP_SW bit when entering suspend
Setting this bit to 0 causes the system to wait until suspended
to use the wakeup masks.  With it being set high previously,
masked interrupts were being received and processed before the
EINT_WAKEUP_MASK was configured.

Signed-off-by: Jonathan Kliegman <kliegs@chromium.org>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04 15:15:49 +09:00
Jonathan Kliegman
672b6829e7 ARM: EXYNOS: Remove hardcode wakeup unmask for EINT_0
For legacy reasons EINT_0 was being forced on for all
exynos systems as a wake interrupt.  For boards that need
EINT_0 they should probably enable it with enable_irq_wake

Signed-off-by: Jonathan Kliegman <kliegs@chromium.org>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04 15:15:43 +09:00
Heiko Stuebner
f0774d41da irqchip: s3c24xx: add devicetree support
Add the necessary code to initialize the interrupt controller
thru devicetree data using the irqchip infrastructure.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04 14:56:30 +09:00
Heiko Stuebner
f5a2552450 irqchip: s3c24xx: make interrupt handling independent of irq_domain structure
Keep a pointer to the corresponding s3c_irq_data struct as irq_chip_data.
This removes the need to fetch the intc struct from the irq_domains
host_data, thus making it independent of the underlying irq_domain
structure.

Also keep the real register offset of the interrupt in the s3c_irq_data
struct to make it independent of the hwirq structure in the irq_domain

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04 14:56:22 +09:00
Heiko Stuebner
658dc8fb9c irqchip: s3c24xx: globally keep track of the created intc instances
For dt-enabled machines we want to use a big irq_domain over all controllers
and therefore need to access not only the main controllers but the
sub-controller as well.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04 14:56:16 +09:00
Heiko Stuebner
bd7c0da2c1 irqchip: s3c24xx: add irq_set_type callback for basic interrupt types
Enables post-init setting of the desired typehandler for the interrupt.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04 14:56:08 +09:00
Heiko Stuebner
1ebc7e83b1 irqchip: s3c24xx: fix irqlist of second s3c2416 controller
The list in used was from the s3c2450, a close cousin of the s3c2416.
As it's not possible to distinguish between the s3c2416 and s3c2450
the additional interrupts of the s3c2450 will only be available thru
devicetree later.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04 14:56:02 +09:00
Heiko Stuebner
e2714f79ed irqchip: s3c24xx: fix comments on some camera interrupts
Might be confusing for people to read the code without having the
datasheet nearby.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04 14:55:55 +09:00
Heiko Stuebner
8a407835be ARM: S3C24XX: move irq driver to drivers/irqchip
This move is necessary to make use of the irqchip infrastructure
for the following devicetree support for s3c24xx architectures.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04 14:55:43 +09:00
Stephen Warren
ce63d6d4bb pinctrl: bcm2835: make use of of_property_read_u32_index()
Use the new standard API of_property_read_u32_index() instead of open-
coding it.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
2013-04-04 18:05:26 +13:00
Tony Prisk
dc1010860b gpio: vt8500: Remove arch-vt8500 gpio driver
With the move to a combined pinctrl/gpio driver, the arch-vt8500
gpio driver is no longer required.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-04 18:00:44 +13:00
Tony Prisk
eaa2badadf arm: vt8500: Remove gpio devicetree nodes
Remove the gpio related devicetree nodes as these are no longer required
with the move to a combined pinctrl/gpio driver.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-04 18:00:32 +13:00
Tony Prisk
649a59cf9b arm: dts: vt8500: Update Wondermedia SoC dtsi files for pinctrl driver
This patch adds pinctrl nodes to the VIA VT8500 and Wondermedia SoC dtsi
files to support the pinctrl driver.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-04 18:00:20 +13:00
Tony Prisk
170c6152ae pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500
This patch adds support for the GPIO/pinmux controller found on the VIA
VT8500 and Wondermedia WM8xxx-series SoCs.

Each pin within the controller is capable of operating as a GPIO or as
an alternate function. The pins are numbered according to their control
bank/bit so that if new pins are added, the existing numbering is maintained.

All currently supported SoCs are included: VT8500, WM8505, WM8650, WM8750 and
WM8850.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-04 18:00:02 +13:00
Tony Prisk
01bb914c8a arm: vt8500: Increase available GPIOs on arch-vt8500
With the inclusion of the pin control driver, more GPIO pins have been
identified on the arch-vt8500 SoCs requiring an increase in the available
GPIOs.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-04 17:59:44 +13:00
Tony Prisk
daeec1f083 of: Remove duplicated code for validating property and value
Several functions in of/base.c have the same code duplicated for
finding and validating a property and value.

struct property *prop = of_find_property(np, propname, NULL);
if (!prop)
	return -EINVAL;
if (!prop->value)
	return -ENODATA;
if (<some length> > prop->length)
	return -EOVERFLOW;

This patch adds of_find_property_value_of_size() which performs the
equivalent of the above code and removes the instances where it was
duplicated in several functions.

Reported-by: Rob Herring <robherring2@gmail.com>
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
2013-04-04 17:59:18 +13:00
Tony Prisk
3daf37260e of: Add support for reading a u32 from a multi-value property.
This patch adds an of_property_read_u32_index() function to allow
reading a single indexed u32 value from a property containing multiple
u32 values.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robherring2@gmail.com>
2013-04-04 17:58:59 +13:00
Arve Hjønnevåg
bd08ec33b5 pstore/ram: Restore ecc information block
This was lost when proc/last_kmsg moved to pstore/console-ramoops.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-03 21:50:10 -07:00
Arve Hjønnevåg
c31ad081e8 pstore/ram: Allow specifying ecc parameters in platform data
Allow specifying ecc parameters in platform data

Signed-off-by: Arve Hjønnevåg <arve@android.com>
[jstultz: Tweaked commit subject & add commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-03 21:50:00 -07:00
Arve Hjønnevåg
422ca8608c pstore/ram: Include ecc_size when calculating ecc_block
Wastes less memory and allows using more memory for ecc than data.

Signed-off-by: Arve Hjønnevåg <arve@android.com>
[jstultz: Tweaked commit subject]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
2013-04-03 21:49:28 -07:00
Lukas Czerner
f78ee70db4 ext4: print more info in ext4_print_free_blocks()
Additionally print i_allocated_meta_blocks information as well.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
2013-04-03 23:33:30 -04:00
Lukas Czerner
be8981be6b ext4: try to prepend extent to the existing one
Currently when inserting extent in ext4_ext_insert_extent() we would
only try to to see if we can append new extent to the found extent. If
we can not, then we proceed with adding new extent into the extent tree,
but then possibly merging it back again.

We can avoid this situation by trying to append and prepend new extent
to the existing ones. However since the new extent can be on either
sides of the existing extent, we have to pick the right extent to try to
append/prepend to.

This patch adds the conditions to pick the right extent to
append/prepend to and adds the actual prepending condition as well. This
will also eliminate the need to use "reserved" block for possibly
growing extent tree.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-03 23:33:28 -04:00
Lukas Czerner
bc2d9db48c ext4: Transfer initialized block to right neighbor if possible
Currently when converting extent to initialized we attempt to transfer
initialized block to the left neighbour if possible when certain
criteria are met. However we do not attempt to do the same for the
right neighbor.

This commit adds the possibility to transfer initialized block to the
right neighbour if:

1. We're not converting the whole extent
2. Both extents are stored in the same extent tree node
3. Right neighbor is initialized
4. Right neighbor is logically abutting the current one
5. Right neighbor is physically abutting the current one
6. Right neighbor would not overflow the length limit

This is basically the same logic as with transferring to the left. This
will gain us some performance benefits since it is faster than inserting
extent and then merging it.

It would also prevent some situation in delalloc patch when we might run
out of metadata reservation. This is due to the fact that we would
attempt to split the extent first (possibly allocating new metadata
block) even though we did not counted for that because it can (and will)
be merged again. This commit fix that scenario, because we no longer
need to split the extent in such case.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
2013-04-03 23:33:27 -04:00
Lukas Czerner
bd86298e60 ext4: introduce ext4_get_group_number()
Currently on many places in ext4 we're using
ext4_get_group_no_and_offset() even though we're only interested in
knowing the block group of the particular block, not the offset within
the block group so we can use more efficient way to compute block
group.

This patch introduces ext4_get_group_number() which computes block
group for a given block much more efficiently. Use this function
instead of ext4_get_group_no_and_offset() everywhere where we're only
interested in knowing the block group.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-03 23:32:34 -04:00
Lukas Czerner
689110098c ext4: make ext4_block_in_group() much more efficient
Currently in when getting the block group number for a particular
block in ext4_block_in_group() we're using
ext4_get_group_no_and_offset() which uses do_div() to get the block
group and the remainer which is offset within the group.

We don't need all of that in ext4_block_in_group() as we only need to
figure out the group number.

This commit changes ext4_block_in_group() to calculate group number
directly. This shows as a big improvement with regards to cpu
utilization. Measuring fallocate -l 15T on fresh file system with perf
showed that 23% of cpu time was spend in the
ext4_get_group_no_and_offset(). With this change it completely
disappears from the list only bumping the occurrence of
ext4_init_block_bitmap() which is the biggest user of
ext4_block_in_group() by 4%. As the result of this change on my system
the fallocate call was approx. 10% faster.

However since there is '-g' option in mkfs which allow us setting
different groups size (mostly for developers) I've introduced new per
file system flag whether we have a standard block group size or
not. The flag is used to determine whether we can use the bit shift
optimization or not.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-03 22:12:52 -04:00
Dmitry Monakhov
a75ae78f08 ext4: unregister es_shrinker if mount failed
Otherwise destroyed ext_sb_info will be part of global shinker list
and result in the following OOPS:

JBD2: corrupted journal superblock
JBD2: recovery failed
EXT4-fs (dm-2): error loading journal
general protection fault: 0000 [#1] SMP
Modules linked in: fuse acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel microcode sg button sd_mod crc_t10dif ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_\
mod
CPU 1
Pid: 2758, comm: mount Not tainted 3.8.0-rc3+ #136                  /DH55TC
RIP: 0010:[<ffffffff811bfb2d>]  [<ffffffff811bfb2d>] unregister_shrinker+0xad/0xe0
RSP: 0000:ffff88011d5cbcd8  EFLAGS: 00010207
RAX: 6b6b6b6b6b6b6b6b RBX: 6b6b6b6b6b6b6b53 RCX: 0000000000000006
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000246
RBP: ffff88011d5cbce8 R08: 0000000000000002 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000000 R12: ffff88011cd3f848
R13: ffff88011cd3f830 R14: ffff88011cd3f000 R15: 0000000000000000
FS:  00007f7b721dd7e0(0000) GS:ffff880121a00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007fffa6f75038 CR3: 000000011bc1c000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process mount (pid: 2758, threadinfo ffff88011d5ca000, task ffff880116aacb80)
Stack:
ffff88011cd3f000 ffffffff8209b6c0 ffff88011d5cbd18 ffffffff812482f1
00000000000003f3 00000000ffffffea ffff880115f4c200 0000000000000000
ffff88011d5cbda8 ffffffff81249381 ffff8801219d8bf8 ffffffff00000000
Call Trace:
[<ffffffff812482f1>] deactivate_locked_super+0x91/0xb0
[<ffffffff81249381>] mount_bdev+0x331/0x340
[<ffffffff81376730>] ? ext4_alloc_flex_bg_array+0x180/0x180
[<ffffffff81362035>] ext4_mount+0x15/0x20
[<ffffffff8124869a>] mount_fs+0x9a/0x2e0
[<ffffffff81277e25>] vfs_kern_mount+0xc5/0x170
[<ffffffff81279c02>] do_new_mount+0x172/0x2e0
[<ffffffff8127aa56>] do_mount+0x376/0x380
[<ffffffff8127ab98>] sys_mount+0x138/0x150
[<ffffffff818ffed9>] system_call_fastpath+0x16/0x1b
Code: 8b 05 88 04 eb 00 48 3d 90 ff 06 82 48 8d 58 e8 75 19 4c 89 e7 e8 e4 d7 2c 00 48 c7 c7 00 ff 06 82 e8 58 5f ef ff 5b 41 5c c9 c3 <48> 8b 4b 18 48 8b 73 20 48 89 da 31 c0 48 c7 c7 c5 a0 e4 81 e\
8
RIP  [<ffffffff811bfb2d>] unregister_shrinker+0xad/0xe0
RSP <ffff88011d5cbcd8>

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2013-04-03 22:10:52 -04:00
Dmitry Monakhov
5d3ee20855 ext4: fix journal callback list traversal
It is incorrect to use list_for_each_entry_safe() for journal callback
traversial because ->next may be removed by other task:
->ext4_mb_free_metadata()
  ->ext4_mb_free_metadata()
    ->ext4_journal_callback_del()

This results in the following issue:

WARNING: at lib/list_debug.c:62 __list_del_entry+0x1c0/0x250()
Hardware name:
list_del corruption. prev->next should be ffff88019a4ec198, but was 6b6b6b6b6b6b6b6b
Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod
Pid: 16400, comm: jbd2/dm-1-8 Tainted: G        W    3.8.0-rc3+ #107
Call Trace:
 [<ffffffff8106fb0d>] warn_slowpath_common+0xad/0xf0
 [<ffffffff8106fc06>] warn_slowpath_fmt+0x46/0x50
 [<ffffffff813637e9>] ? ext4_journal_commit_callback+0x99/0xc0
 [<ffffffff8148cae0>] __list_del_entry+0x1c0/0x250
 [<ffffffff813637bf>] ext4_journal_commit_callback+0x6f/0xc0
 [<ffffffff813ca336>] jbd2_journal_commit_transaction+0x23a6/0x2570
 [<ffffffff8108aa42>] ? try_to_del_timer_sync+0x82/0xa0
 [<ffffffff8108b491>] ? del_timer_sync+0x91/0x1e0
 [<ffffffff813d3ecf>] kjournald2+0x19f/0x6a0
 [<ffffffff810ad630>] ? wake_up_bit+0x40/0x40
 [<ffffffff813d3d30>] ? bit_spin_lock+0x80/0x80
 [<ffffffff810ac6be>] kthread+0x10e/0x120
 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70
 [<ffffffff818ff6ac>] ret_from_fork+0x7c/0xb0
 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70

This patch fix the issue as follows:
- ext4_journal_commit_callback() make list truly traversial safe
  simply by always starting from list_head
- fix race between two ext4_journal_callback_del() and
  ext4_journal_callback_try_del()

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.com
2013-04-03 22:08:52 -04:00
Dmitry Monakhov
794446c694 jbd2: fix race between jbd2_journal_remove_checkpoint and ->j_commit_callback
The following race is possible:

[kjournald2]                              other_task
jbd2_journal_commit_transaction()
  j_state = T_FINISHED;
  spin_unlock(&journal->j_list_lock);
                                         ->jbd2_journal_remove_checkpoint()
					   ->jbd2_journal_free_transaction();
					     ->kmem_cache_free(transaction)
  ->j_commit_callback(journal, transaction);
    -> USE_AFTER_FREE

WARNING: at lib/list_debug.c:62 __list_del_entry+0x1c0/0x250()
Hardware name:
list_del corruption. prev->next should be ffff88019a4ec198, but was 6b6b6b6b6b6b6b6b
Modules linked in: cpufreq_ondemand acpi_cpufreq freq_table mperf coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode sg xhci_hcd button sd_mod crc_t10dif aesni_intel ablk_helper cryptd lrw aes_x86_64 xts gf128mul ahci libahci pata_acpi ata_generic dm_mirror dm_region_hash dm_log dm_mod
Pid: 16400, comm: jbd2/dm-1-8 Tainted: G        W    3.8.0-rc3+ #107
Call Trace:
 [<ffffffff8106fb0d>] warn_slowpath_common+0xad/0xf0
 [<ffffffff8106fc06>] warn_slowpath_fmt+0x46/0x50
 [<ffffffff813637e9>] ? ext4_journal_commit_callback+0x99/0xc0
 [<ffffffff8148cae0>] __list_del_entry+0x1c0/0x250
 [<ffffffff813637bf>] ext4_journal_commit_callback+0x6f/0xc0
 [<ffffffff813ca336>] jbd2_journal_commit_transaction+0x23a6/0x2570
 [<ffffffff8108aa42>] ? try_to_del_timer_sync+0x82/0xa0
 [<ffffffff8108b491>] ? del_timer_sync+0x91/0x1e0
 [<ffffffff813d3ecf>] kjournald2+0x19f/0x6a0
 [<ffffffff810ad630>] ? wake_up_bit+0x40/0x40
 [<ffffffff813d3d30>] ? bit_spin_lock+0x80/0x80
 [<ffffffff810ac6be>] kthread+0x10e/0x120
 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70
 [<ffffffff818ff6ac>] ret_from_fork+0x7c/0xb0
 [<ffffffff810ac5b0>] ? __init_kthread_worker+0x70/0x70

In order to demonstrace this issue one should mount ext4 with mount -o
discard option on SSD disk.  This makes callback longer and race
window becomes wider.

In order to fix this we should mark transaction as finished only after
callbacks have completed

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
2013-04-03 22:06:52 -04:00
Theodore Ts'o
996bb9fddd ext4: support simple conversion of extent-mapped inodes to use i_blocks
In order to make it simpler to test the code which support
i_blocks/indirect-mapped inodes, support the conversion of inodes
which are less than 12 blocks and which are contained in no more than
a single extent.

The primary intended use of this code is to converting freshly created
zero-length files and empty directories.

Note that the version of chattr in e2fsprogs 1.42.7 and earlier has a
check that prevents the clearing of the extent flag.  A simple patch
which allows "chattr -e <file>" to work will be checked into the
e2fsprogs git repository.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-03 22:04:52 -04:00
Theodore Ts'o
d76a3a7711 ext4/jbd2: don't wait (forever) for stale tid caused by wraparound
In the case where an inode has a very stale transaction id (tid) in
i_datasync_tid or i_sync_tid, it's possible that after a very large
(2**31) number of transactions, that the tid number space might wrap,
causing tid_geq()'s calculations to fail.

Commit deeeaf13 "jbd2: fix fsync() tid wraparound bug", later modified
by commit e7b04ac0 "jbd2: don't wake kjournald unnecessarily",
attempted to fix this problem, but it only avoided kjournald spinning
forever by fixing the logic in jbd2_log_start_commit().

Unfortunately, in the codepaths in fs/ext4/fsync.c and fs/ext4/inode.c
that might call jbd2_log_start_commit() with a stale tid, those
functions will subsequently call jbd2_log_wait_commit() with the same
stale tid, and then wait for a very long time.  To fix this, we
replace the calls to jbd2_log_start_commit() and
jbd2_log_wait_commit() with a call to a new function,
jbd2_complete_transaction(), which will correctly handle stale tid's.

As a bonus, jbd2_complete_transaction() will avoid locking
j_state_lock for writing unless a commit needs to be started.  This
should have a small (but probably not measurable) improvement for
ext4's scalability.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Reported-by: George Barnett <gbarnett@atlassian.com>
Cc: stable@vger.kernel.org
2013-04-03 22:02:52 -04:00
Theodore Ts'o
b10a44c369 ext4: add might_sleep() annotations
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
2013-04-03 22:00:52 -04:00
Theodore Ts'o
19b5ef6157 ext4: add mutex_is_locked() assertion to ext4_truncate()
[ Added fixup from Lukáš Czerner which only checks the assertion when
  the inode is not new and is not being freed. ]

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-04-03 21:58:52 -04:00
Javier Martinez Canillas
5330dc161c ARM: OMAP2+: Add GPMC DT support for Ethernet child nodes
Besides being used to interface with external memory devices,
the General-Purpose Memory Controller can be used to connect
Pseudo-SRAM devices such as ethernet controllers to OMAP2+
processors using the TI GPMC as a data bus.

This patch allows an ethernet chip to be defined as an GPMC
child device node.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
2013-04-03 20:13:42 -05:00
Javier Martinez Canillas
3af91cf701 ARM: OMAP2+: rename gpmc_probe_nor_child() to gpmc_probe_generic_child()
The gpmc_probe_nor_child() function is used in the GPMC driver to
configure the GPMC for a NOR child device node.

But this function is quite generic and all the NOR specific configuration
is made by the driver of the actual NOR flash memory used.

Other Pseudo-SRAM devices such as ethernet controllers need a similar
setup so by making this function generic it can be used for those too.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
2013-04-03 20:13:42 -05:00
Javier Martinez Canillas
e8ffd6fdf2 ARM: OMAP2+: return -ENODEV if GPMC child device creation fails
gpmc_probe_nor_child() calls of_platform_device_create() to create a
platform device for the NOR child. If this function fails the value
of ret is returned to the caller but this value is zero since it was
assigned the return of a previous call to gpmc_cs_program_settings()
that had to succeed or otherwise gpmc_probe_nor_child() would have
returned before.

This means that if of_platform_device_create() fails, 0 will be returned
to the caller instead of an appropriate error code.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
2013-04-03 20:13:41 -05:00
Jon Hunter
84b00f0e28 ARM: OMAP2+: Allow GPMC probe to complete even if CS mapping fails
When the GPMC driver is probed, we call gpmc_mem_init() to see which
chip-selects have already been configured and enabled by the boot-loader
and allocate space for them. If we fail to allocate space for one
chip-select, then we return failure from the probe and the GPMC driver
will not be available.

Rather than render the GPMC useless for all GPMC devices, if we fail to
allocate space for one chip-select print a warning and disable the
chip-select. This way other GPMC clients can still be used.

There is no downside to this approach, because all GPMC clients need to
request a chip-select before they can use the GPMC and on requesting a
chip-select, if memory has not already been reserved for the chip-select
then it will be.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
2013-04-03 20:13:40 -05:00
Jon Hunter
bf2343974e ARM: OMAP2+: Remove unnecesssary GPMC definitions and variable
With commit 21cc2bd (ARM: OMAP2+: Remove apollon board support) the
variable "boot_rom_space" is now not needed and the code surrounding
this variable can be cleaned up and simplified. Remove unnecessary
definitions and clean-up the comment as well.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
2013-04-03 20:13:40 -05:00
Jon Hunter
c71f8e9bef ARM: OMAP2+: Detect incorrectly aligned GPMC base address
Each GPMC chip-select can be configured to map 16MB, 32MB, 64MB or 128MB
of address space. The physical base address where a chip-select starts
is also configurable and must be aligned on a boundary that is equal to
or greater than the size of the address space mapped bt the chip-select.
When enabling a GPMC chip-select, ensure that the base address is aligned
to the appropriate boundary.

Reported-by: Mark Jackson <mpfj-list@mimc.co.uk>
Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
2013-04-03 20:13:39 -05:00
Jon Hunter
32cde0b514 ARM: OMAP2+: Convert ONENAND to retrieve GPMC settings from DT
When booting with device-tree, retrieve GPMC settings for ONENAND from
the device-tree blob. This will allow us to remove all static settings
stored in the gpmc-nand.c in the future once the migration to
device-tree is complete.

The user must now specify the ONENAND device width in the device-tree
binding so that the GPMC can be programmed correctly. Therefore, update
the device-tree binding documentation for ONENAND devices connected to
the GPMC to reflect this.

Please note that this does not include GPMC timings for ONENAND. The
timings are being calculated at runtime.

There is some legacy code that only enables read wait monitoring for
non-OMAP3 devices. There are no known OMAP3 device issues that prevent
this feature being enabled and so when booting with device-tree use the
wait-monitoring settings described in the device-tree blob.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
2013-04-03 20:13:39 -05:00
Jon Hunter
acc79980c9 ARM: OMAP2+: Convert NAND to retrieve GPMC settings from DT
When booting with device-tree, retrieve GPMC settings for NAND from
the device-tree blob. This will allow us to remove all static settings
stored in the gpmc-nand.c in the future once the migration to
device-tree is complete.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
2013-04-03 20:13:38 -05:00
Jon Hunter
cdd6928c58 ARM: OMAP2+: Add device-tree support for NOR flash
NOR flash is not currently supported when booting with device-tree
on OMAP2+ devices. Add support to detect and configure NOR devices
when booting with device-tree.

Add documentation for the TI GPMC NOR binding.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
2013-04-03 20:13:38 -05:00
Jon Hunter
d36b4cd46d ARM: OMAP2+: Add additional GPMC timing parameters
Some of the GPMC timings parameters are currently missing from the GPMC
device-tree binding. Add these parameters to the binding documentation
as well as code to read them. Also add either "-ps" or "-ns" suffix to
the GPMC timing properties to indicate whether the timing is in
picoseconds or nanoseconds.

The existing code in gpmc_read_timings_dt() is checking the value of
of_property_read_u32() and only is successful storing the value read
in the gpmc_timings structure. Checking the return value in this case
is not necessary and we can simply read the value, if present, and
store directly in the gpmc_timings structure. Therefore, simplify the
code by removing these checks.

The comment in the gpmc_read_timings_dt() function, "only for OMAP3430"
is also incorrect as it is applicable to all OMAP3+ devices. So correct
this too.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
2013-04-03 20:12:18 -05:00
Alexander Shiyan
a4e4d22c6f ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2412
S3C2412 boards are already under "if CPU_S3C2412" condition, so
additional dependencies on this symbol can be removed.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04 10:04:00 +09:00
Alexander Shiyan
fb278af74b ARM: S3C24XX: Removed unneeded dependency on CPU_S3C2410
S3C2410 boards are already under "if CPU_S3C2410" condition, so
additional dependencies on this symbol can be removed.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04 10:03:57 +09:00
Alexander Shiyan
1c13786d81 ARM: S3C24XX: Removed unneeded dependency on ARCH_S3C24XX for boards
Board options are already under "if ARCH_S3C24XX" condition, so
additional dependencies on this symbol can be removed.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04 10:03:53 +09:00