Commit graph

388,156 commits

Author SHA1 Message Date
Kukjin Kim
536504309c ARM: SAMSUNG: change GENERIC_GPIO to ARCH_REQUIRE_GPIOLIB
When I applied regarding samsung-time patches, the "select GENERIC_GPIO"
has been added wrong, so this patch fixes that.
And since the GENERIC_GPIO in arch/arm/ will be gone away, this adds
ARCH_REQUIRE_GPIOLIB for S3C24XX and S5PC100 instead.

Reported-by: Alexandre Courbot <gnurou@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04 09:36:24 +09:00
Qiang Liu
7551c40d90 fsl/sata: create a sysfs entry for rx water mark
Support config RX WATER MARK via sysfs when running at run-time;
A wrokaround for fix the exception happened to some WD HDD, found on
WD3000HLFS-01G6U1, WD3000HLFS-01G6U0, some SSD disks. The read performance
is also regression (about 30%) when use default value.

According to the latest documents, 0x10 is the default value of RX WATER MARK,
but exception/performance issue happened to some disks mentioned above.

The exception log as below when testing read performance with IOZone:
ata1.00: exception Emask 0x0 SAct 0x7 SErr 0x800000 action 0x6 frozen
ata1: SError: { LinkSeq }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/00:00:ff:2c:14/01:00:02:00:00/40 tag 0 ncq 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/00:08:ff:2d:14/01:00:02:00:00/40 tag 1 ncq 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1.00: failed command: WRITE FPDMA QUEUED
ata1.00: cmd 61/10:10:af:08:6e/00:00:12:00:00/40 tag 2 ncq 8192 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: hard resetting link
ata1: Hardreset failed, not off-lined 0
ata1: Signature Update detected @ 504 msecs
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1.00: device reported invalid CHS sector 0
ata1: EH complete

The exception/performance can be resolved when RX WATER MARK value is 0x16.

Signed-off-by: Qiang Liu <qiang.liu@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-03 19:55:36 -04:00
Aaron Lu
7381fe7374 libata-acpi: remove redundent code for power resource handling
With commit:
bc9b6407bd
ACPI / PM: Rework the handling of devices depending on power resources

The ACPI core now takes care of the power resources an acpi device
depends on in that when the power resources are turned on, any devices
that are bound to or in the dependent list of this acpi device will be
runtime resumed. So there is no need for ata acpi code to duplicate this
effort, and thus, the ata_acpi_(un)register_power_resource functions are
no longer needed.

The above commit thinks the scsi device is not bound to the acpi device,
so needs to be added to the dependent list. But actually, it is. So
there is no need to add it to the dependent list, or it will be runtime
resumed twice(though this wouldn't cause any problem).

This patch fixes it, and as a result, the
ata_acpi_(un)register_power_resource and ata_acpi_(un)bind functions
are removed.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-03 19:55:32 -04:00
Jingoo Han
b1a72d600a sata_highbank: make ahci_highbank_pm_ops static
Make ahci_highbank_pm_ops static because ahci_highbank_pm_ops is
not exported.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-03 19:53:45 -04:00
Alexandru Gheorghiu
b1cbe7d621 pata_octeon_cf: Use resource_size function
Use resource_size function instead of explicit computation.
Patch found using coccinelle.

Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-03 19:53:30 -04:00
Dan Carpenter
e0044c9822 pata_legacy: bogus clock in opti82c46x_set_piomode()
"sysclk" is used as an index into a 4 element array.  My static
checker complains because it can be out of bounds.  From the
context, it looks like there is a right bit shift missing.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-03 19:53:10 -04:00
Jingoo Han
bdfa2e7e5a pata_at32: use module_platform_driver_probe()
This patch uses module_platform_driver_probe() macro which makes
the code smaller and simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-03 19:52:10 -04:00
Krzysztof Mazur
6d3bfc7be6 [libata] Fix HDIO_DRIVE_* ioctl() Linux 3.9 regression
On Mon, Mar 25, 2013 at 06:26:50PM +0100, Ronald wrote:
> In reply to [1]: I have the same issue. Git bisect took 50+ rebuilds xD
>
> Smartd does not work anymore since 84a9a8cd9 ([libata] Set proper SK
> when CK_COND is set.).

> [1] http://www.spinics.net/lists/linux-ide/msg45268.html

It seems that the SAM_STAT_CHECK_CONDITION is not cleared
causing -EIO, because that patch modified sensebuf and
the check for clearing SAM_STAT_CHECK_CONDITION is no longer valid.

Fix that.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-03 19:48:49 -04:00
Paul Bolle
05b7a96431 ARM: SAMSUNG: Fix typo "CONFIG_SAMSUNG_DEV_RTC"
s3c_rtc_setname() tests for CONFIG_SAMSUNG_DEV_RTC or
CONFIG_PLAT_S3C24XX. But of these two macros only CONFIG_PLAT_S3C24XX
actually exists. Now we can see that s3c_device_rtc is only defined if
either CONFIG_PLAT_S3C24XX or CONFIG_S3C_DEV_RTC are defined. So,
apparently, it was intended to use CONFIG_S3C_DEV_RTC here.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04 08:48:24 +09:00
Paul Bolle
2294450d9c ARM: S5P64X0: Fix typo "CONFIG_S5P64X0_SETUP_SDHCI"
Commit ebc433c289 ("ARM: S5P64X0: Add HSMMC setup for host
Controller") added the Kconfig symbol S5P64X0_SETUP_SDHCI_GPIO.
By accident it also used a macro CONFIG_S5P64X0_SETUP_SDHCI.
Fix that typo.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04 08:48:17 +09:00
Paul Bolle
ed7966b886 ARM: S3C64XX: remove obsolete Makefile line
Commit a07613a54d ("Merge branch 'samsung/dt' into samsung/cleanup")
added this line to arch/arm/mach-s3c64xx/Makefile:
    obj-$(CONFIG_S3C64XX_DEV_SPI)	+= dev-spi.o

But at that time CONFIG_S3C64XX_DEV_SPI wasn't a valid Kconfig macro
anymore and arch/arm/mach-s3c64xx/dev-spi.c was already removed. So we
can remove this line.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04 08:46:12 +09:00
David Woodhouse
8e725c7f8a libata: fix DMA to stack in reading devslp_timing parameters
Commit 803739d25c ("[libata] replace
sata_settings with devslp_timing"), which was also Cc: stable, used a
stack buffer to receive data from ata_read_log_page(), which triggers
the following warning:
 ahci 0000:00:1f.2: DMA-API: device driver maps memory fromstack [addr=ffff880140469948]

Fix this by using ap->sector_buf instead of a stack buffer.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-03 19:45:57 -04:00
Youquan Song
b55f84e2d5 ata_piix: Fix DVD not dectected at some Haswell platforms
There is a quirk patch 5e5a4f5d5a
"ata_piix: make DVD Drive recognisable on systems with Intel Sandybridge
 chipsets(v2)" fixing the 4 ports IDE controller 32bit PIO mode.

We've hit a problem with DVD not recognized on Haswell Desktop platform which
includes Lynx Point 2-port SATA controller.

This quirk patch disables 32bit PIO on this controller in IDE mode.

v2: Change spelling error in statememnt pointed by Sergei Shtylyov.
v3: Change comment statememnt and spliting line over 80 characters pointed by
    Libor Pechacek and also rebase the patch against 3.8-rc7 kernel.

Tested-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Youquan Song <youquan.song@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-03 19:43:36 -04:00
Shan Hai
a32450e127 libata: Set max sector to 65535 for Slimtype DVD A DS8A8SH drive
The Slimtype DVD A  DS8A8SH drive locks up when max sector is smaller than
65535, and the blow backtrace is observed on locking up:

INFO: task flush-8:32:1130 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
flush-8:32      D ffffffff8180cf60     0  1130      2 0x00000000
 ffff880273aef618 0000000000000046 0000000000000005 ffff880273aee000
 ffff880273aee000 ffff880273aeffd8 ffff880273aee010 ffff880273aee000
 ffff880273aeffd8 ffff880273aee000 ffff88026e842ea0 ffff880274a10000
Call Trace:
 [<ffffffff8168fc2d>] schedule+0x5d/0x70
 [<ffffffff8168fccc>] io_schedule+0x8c/0xd0
 [<ffffffff81324461>] get_request+0x731/0x7d0
 [<ffffffff8133dc60>] ? cfq_allow_merge+0x50/0x90
 [<ffffffff81083aa0>] ? wake_up_bit+0x40/0x40
 [<ffffffff81320443>] ? bio_attempt_back_merge+0x33/0x110
 [<ffffffff813248ea>] blk_queue_bio+0x23a/0x3f0
 [<ffffffff81322176>] generic_make_request+0xc6/0x120
 [<ffffffff81322308>] submit_bio+0x138/0x160
 [<ffffffff811d7596>] ? bio_alloc_bioset+0x96/0x120
 [<ffffffff811d1f61>] submit_bh+0x1f1/0x220
 [<ffffffff811d48b8>] __block_write_full_page+0x228/0x340
 [<ffffffff811d3650>] ? attach_nobh_buffers+0xc0/0xc0
 [<ffffffff811d8960>] ? I_BDEV+0x10/0x10
 [<ffffffff811d8960>] ? I_BDEV+0x10/0x10
 [<ffffffff811d4ab6>] block_write_full_page_endio+0xe6/0x100
 [<ffffffff811d4ae5>] block_write_full_page+0x15/0x20
 [<ffffffff811d9268>] blkdev_writepage+0x18/0x20
 [<ffffffff81142527>] __writepage+0x17/0x40
 [<ffffffff811438ba>] write_cache_pages+0x34a/0x4a0
 [<ffffffff81142510>] ? set_page_dirty+0x70/0x70
 [<ffffffff81143a61>] generic_writepages+0x51/0x80
 [<ffffffff81143ab0>] do_writepages+0x20/0x50
 [<ffffffff811c9ed6>] __writeback_single_inode+0xa6/0x2b0
 [<ffffffff811ca861>] writeback_sb_inodes+0x311/0x4d0
 [<ffffffff811caaa6>] __writeback_inodes_wb+0x86/0xd0
 [<ffffffff811cad43>] wb_writeback+0x1a3/0x330
 [<ffffffff816916cf>] ? _raw_spin_lock_irqsave+0x3f/0x50
 [<ffffffff811b8362>] ? get_nr_inodes+0x52/0x70
 [<ffffffff811cb0ac>] wb_do_writeback+0x1dc/0x260
 [<ffffffff8168dd34>] ? schedule_timeout+0x204/0x240
 [<ffffffff811cb232>] bdi_writeback_thread+0x102/0x2b0
 [<ffffffff811cb130>] ? wb_do_writeback+0x260/0x260
 [<ffffffff81083550>] kthread+0xc0/0xd0
 [<ffffffff81083490>] ? kthread_worker_fn+0x1b0/0x1b0
 [<ffffffff8169a3ec>] ret_from_fork+0x7c/0xb0
 [<ffffffff81083490>] ? kthread_worker_fn+0x1b0/0x1b0

 The above trace was triggered by
   "dd if=/dev/zero of=/dev/sr0 bs=2048 count=32768"

 It was previously working by accident, since another bug introduced
 by 4dce8ba94c (libata: Use 'bool' return value for ata_id_XXX) caused
 all drives to use maxsect=65535.

Cc: stable@vger.kernel.org
Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-03 19:33:43 -04:00
Shan Hai
d8668fcb0b libata: Use integer return value for atapi_command_packet_set
The function returns type of ATAPI drives so it should return integer value.
The commit 4dce8ba94c (libata: Use 'bool' return value for ata_id_XXX) since
v2.6.39 changed the type of return value from int to bool, the change would
cause all of the ATAPI class drives to be treated as TYPE_TAPE and the
max_sectors of the drives to be set to 65535 because of the commit
f8d8e5799b7(libata: increase 128 KB / cmd limit for ATAPI tape drives), for the
function would return true for all ATAPI class drives and the TYPE_TAPE is
defined as 0x01.

Cc: stable@vger.kernel.org
Signed-off-by: Shan Hai <shan.hai@windriver.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-04-03 19:33:40 -04:00
Linus Torvalds
66ade47423 Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King:
 "Another round of ARM fixes, which include:
   - Fixing a problem with LPAE mapping sections
   - Reporting of some hwcaps on Krait CPUs
   - Avoiding repetitive warnings in the breakpoint code
   - Fixing a build error noticed on Dove platforms with PJ4 CPUs
   - Fix masking of level 2 cache revision.
   - Fixing timer-based udelay()
   - A larger fix for an erratum causing people major grief with Cortex
     A15 CPUs"

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7690/1: mm: fix CONFIG_LPAE typos
  ARM: 7689/1: add unwind annotations to ftrace asm
  ARM: 7685/1: delay: use private ticks_per_jiffy field for timer-based delay ops
  ARM: 7684/1: errata: Workaround for Cortex-A15 erratum 798181 (TLBI/DSB operations)
  ARM: 7682/1: cache-l2x0: fix masking of RTL revision numbering and set_debug init
  ARM: iWMMXt: always enable iWMMXt support with PJ4 CPUs
  ARM: 7681/1: hw_breakpoint: use warn_once to avoid spam from reset_ctrl_regs()
  ARM: 7678/1: Work around faulty ISAR0 register in some Krait CPUs
  ARM: 7680/1: Detect support for SDIV/UDIV from ISAR0 register
  ARM: 7679/1: Clear IDIVT hwcap if CONFIG_ARM_THUMB=n
  ARM: 7677/1: LPAE: Fix mapping in alloc_init_section for unaligned addresses
  ARM: KVM: vgic: take distributor lock on sync_hwstate path
  ARM: KVM: vgic: force EOIed LRs to the empty state
2013-04-03 16:15:17 -07:00
Prarit Bhargava
e82b14bdd3 PCI: aer_inject: Fix return values when device not found
Currently the aer_inject driver returns -ENOTTY when the target PCIe
device root port is not found or if the device or root port doesn't
support AER.

In the case where the root port isn't found, the driver should return
-ENODEV, and in the other cases it should return -EPERM.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-03 17:08:45 -06:00
Rafael J. Wysocki
de7d5f729c PCI/PM: Disable runtime PM of PCIe ports
The runtime PM of PCIe ports turns out to be quite fragile, as in
some cases things work while in some other cases they don't and we
don't seem to have a good way to determine whether or not they are
going to work in advance.

For this reason, avoid enabling runtime PM for PCIe ports by
keeping their runtime PM reference counters always above 0 for the
time being.

When a PCIe port is suspended, it can no longer report events like
hotplug, so hotplug below the port may not work, as in the bug
report below.

[bhelgaas: changelog, stable]
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=53811
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org	# v3.6+
2013-04-03 15:54:59 -06:00
Patrik Jakobsson
f9d8149ac1 drm/gma500: Change fb name so pm-utils doesn't apply quirks
By having 'drm' and 'fb' in the fb screeninfo id, pm-utils will leave us
alone. Otherwise we'll have quirks up to our ears and resume will break.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
2013-04-03 23:52:04 +02:00
Rafael J. Wysocki
24ad0ef9c8 PCI/ACPI: Always resume devices on ACPI wakeup notifications
It turns out that the _Lxx control methods provided by some BIOSes
clear the PME Status bit of PCI devices they handle, which means that
pci_acpi_wake_dev() cannot really use that bit to check whether or
not the device has signalled wakeup.

One symptom of the problem is, for example, that when an affected PCI
USB controller is runtime-suspended, then plugging in a new USB device
into one of the controller's ports will not wake up the controller,
which should happen.

For this reason, make pci_acpi_wake_dev() always attempt to resume
the device it is called for regardless of the device's PME Status bit
value (that bit still has to be cleared if set at this point,
though).

Reported-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Matthew Garrett <mjg59@srcf.ucam.org>
CC: stable@vger.kernel.org	# v3.7+
2013-04-03 15:49:52 -06:00
Kevin Wilson
1e2ccd1c0f cgroup: remove unused parameter in cgroup_task_migrate().
This patch removes unused parameter from cgroup_task_migrate().

Signed-off-by: Kevin Wilson <wkevils@gmail.com>
Acked-by: Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-04-03 14:04:33 -07:00
Rami Rosen
1ae65ae92d cgroups: Documentation/cgroup/cgroup.txt - a trivial fix.
This trivial patch removes a word which appears twice in
Documentation/cgroup/cgroup.txt.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-04-03 14:03:30 -07:00
H Hartley Sweeten
e9e7023c99 staging: comedi: rtd520: rename thisboard variable
For aesthetic reasons. rename the local variable 'thisboard' to 'board'
throughout the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-03 13:54:05 -07:00
H Hartley Sweeten
34db8ef946 staging: comedi: rtd520: rename CamelCase chanBipolar
Rename the CamelCase private data variable chanBipolar to chan_is_bipolar.
Remove the unnecessary comment about it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-03 13:54:05 -07:00
H Hartley Sweeten
b0ae4368d7 staging: comedi: rtd520: rename CamelCase in rtdConvertChanGain()
Rename the CamelCase function rtdConvertChanGain() as well as the
CamelCase parameters to the function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-03 13:54:05 -07:00
H Hartley Sweeten
dcc2358fa4 staging: comedi: rtd520: rename CamelCase rtdBoard
Rename the CamelCase struct rtdBoard to rtd_boardinfo. Also, rename the
range10Start and rangeUniStart variables in the struct to range_bip10
and range_uni10.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-03 13:54:04 -07:00
H Hartley Sweeten
8bc1bd1fc0 staging: comedi: rtd520: rename CamelCase aiCount
Rename this private data variable to ai_count.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-03 13:54:04 -07:00
H Hartley Sweeten
2f0210346a staging: comedi: rtd520: rename CamelCase in rtd_interrupt()
Rename the CamelCase local variable fifoStatus to fifo_status.

Also rename the goto lables abortTransfer and transferDone to
xfer_abort and xfer_done.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-03 13:54:04 -07:00
H Hartley Sweeten
cd5e2d0628 staging: comedi: rtd520: rename CamelCase fifoLen
Rename this private data variable to fifosz.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-03 13:54:04 -07:00
H Hartley Sweeten
2d7b8b9434 staging: comedi: rtd520: rename CamelCase transCount
Rename this private data variable to xfer_count.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-03 13:54:04 -07:00
H Hartley Sweeten
d7c115cea7 staging: comedi: rtd520: rename CamelCase aoValue
Rename this private data variable to ao_readback and remove the
unnecessary comments.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-03 13:54:04 -07:00
H Hartley Sweeten
4686a0e642 staging: comedi: rtd520: rename CamelCase rtdPrivate
Rename the private data struct to rtd_private.

Also, remove the unnecessary comment about it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-03 13:54:03 -07:00
H Hartley Sweeten
efa5b32658 staging: comedi: rtd520: cleanup rtd_dio_insn_config()
Add a local variable to make this function a bit cleaner and
remove the unnecessary comments.

The comedi core expects this function to return the number of
data parameters used. Change the return from '1' to 'insn->n'
to make this more apparent.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-03 13:54:03 -07:00
Patrice Chotard
44df39f28a ARM: ux500: 8500: add ab8500-musb pinctrl support
Add necessary definitions to support ab8500-musb pinctrl default and
sleep states.

Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com>
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-03 22:51:39 +02:00
Emmanuel Grumbach
d37cac98ab iwlwifi: mvm: rename iwl_mvm_new_bt_coex_notif
It actually handles a BT coex notification, so rename it
to be more self explained.
Also, this function can always look at mvm->last_bt_notif
provided that the latter is updated on time.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03 22:49:55 +02:00
Emmanuel Grumbach
881acd8987 iwlwifi: mvm: clean up invalid station handling
Using IWL_MVM_STATION_COUNT and IWL_INVALID_STATION together
isn't a good idea as they have different values. Always use
IWL_MVM_STATION_COUNT for an invalid station in MVM and move
the definition of the IWL_INVALID_STATION constant into the
DVM driver to avoid making such mistakes again. The one use
in the transport code can be hard-coded to -1 instead as the
station ID is passed as an integer there.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03 22:49:54 +02:00
Shuduo Sang
20ecf9fd3b iwlwifi: add new pci id for 6x35 series
some new thinkpad laptops use intel chip with new pci id need be added
lspci -vnn output:
 Network controller [0280]: Intel Corporation Centrino Advanced-N 6235
 [8086:088f] (rev 24)
 Subsystem: Intel Corporation Device [8086:5260]

Signed-off-by: Shuduo Sang <sangshuduo@gmail.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03 22:49:54 +02:00
Emmanuel Grumbach
9e511c3135 iwlwifi: mvm: beautify code in BT Coex
The iterators don't need to know what bt_kill_msk means.
All they need to know is if reduced Tx power is enabled
on an interface or not. So change the member of the
iterator to be a bool.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03 22:49:53 +02:00
Ilan Peer
1da80e8034 iwlwifi: mvm: Sync FW API time event notification change
The firmware API changed to differentiate between event and
fragment start/end. Change the time-event handling accordingly.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03 22:49:52 +02:00
Johannes Berg
c920487dfa iwlwifi: sleep for at least 10 seconds
Many platforms have issues processing a wakeup signal
while they're still suspending, and will ignore it.
Since our device thinks it woke the platform, and the
platform ignored the signal, it will sleep without
WoWLAN being enabled as the device disables WoWLAN
when having woken the platform.

Resolve this by making the device wait for 10 seconds
after getting the suspend signal before waking up the
platform.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03 22:49:52 +02:00
Johannes Berg
2b2719c7b5 iwlwifi: print opmode when firmware is loaded
Print the sub-driver (opmode, i.e. DVM or MVM) when the
firmware is loaded.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03 22:49:51 +02:00
Alexander Bondar
4d1c4b1a63 iwlwifi: mvm: remove redundant iwl_power_get_params()
The function just wraps an existing one, remove it.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03 22:49:49 +02:00
Fabio Baltieri
b02ffdf48a ARM: ux500: remove redundant DB8500_PIN_SLEEP definition
DB8500_PIN_SLEEP was defined twice, drop one of the two.

Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-03 22:49:18 +02:00
Alexander Bondar
614ee33632 iwlwifi: mvm: change active-to-powersave transition time for BPS
The requirement for TX/RX active to powersave transition time for
the Balanced Power Save (BPS) scheme changed. Change the driver
accordingly and set transition time to 100 msec.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03 22:49:17 +02:00
Alexander Bondar
3f0b2b3ec8 iwlwifi: mvm: encapsulate power table command log message
Encapsulate the power table command logging in a separate
function to print the same information in both cases.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03 22:49:17 +02:00
Alexander Bondar
e16cf7ec6f iwlwifi: mvm: set keepalive period regardless of PM state
The firmware starts sending nulldata frames for keepalive immediately
after association, regardless of power management state. The driver
thus needs to configure keep alive period unconditionally.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03 22:49:16 +02:00
Alexander Bondar
9a6130485e iwlwifi: mvm: always send power table command
The driver distinguishes between power management and device's power
down enablement. Power management enablement depends both on driver's
module power parameters and mac80211 decision. The device's power down
depends only on driver's module power parameters. Change the driver to
always send Power Table command to enable or disable both power
management and device's power down.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03 22:49:16 +02:00
Alexander Bondar
7c1bf93fb2 iwlwifi: mvm: Fix active-to-powersave transition time units
Active to power save mode transition time for TX/RX in the power
table command is in microseconds, fix the units in the driver.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03 22:49:15 +02:00
Alexander Bondar
5ee2b2154e iwlwifi: mvm: don't disable power management due to P2P device
Currently power management is supported only when only a single
virtual interface is present. The driver verifies number of created
interfaces and disables power management when multiple interfaces
present. However, this rule does not extend to a P2P device that is
handled differently in the firmware. If a P2P device is added power
management can remain enabled.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03 22:49:14 +02:00
Alexander Bondar
f4a3e2fefe iwlwifi: mvm: Rename some power management definitions and methods
Replace SLEEP_OVER_DTIM by SKIP_OVER_DTIM.
Add iwl_mvm prefix to a function name.

Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-03 22:49:14 +02:00