Commit graph

388,156 commits

Author SHA1 Message Date
Tang Yuantian
cb2cfb8ffa powerpc/fsl: remove the PPC_CLOCK dependency
Config FSL_SOC does not depend on PPC_CLOCK anymore since the following
commit got merged: 93abe8e (clk: add non CONFIG_HAVE_CLK routines)
Config CPM does not use PPC_CLOCK either currently. So remove them.

PPC_CLOCK also keeps Freescale PowerPC archtecture from supporting COMMON_CLK.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-12 16:00:08 -05:00
Jiucheng Xu
1e612bc71b powerpc/85xx: Reserve a partition of NOR flash for QE ucode firmware
Due to the partition of JFFS2 overlaps with QE ucode firmware, So JFFS2
will break QE ucode. Shrink JFFS2's partition to reserve the space of
QE ucode firmware.

Signed-off-by: Jiucheng Xu <Jiucheng.Xu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-12 16:00:07 -05:00
Ramneek Mehresh
0655149200 powerpc/85xx: Add first usb controller node for Qonverge platforms
Add first usb controller node for qonverge qoriq platforms like
B4860, etc

Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-12 15:59:36 -05:00
Kumar Gala
40d6b79dd8 powerpc/85xx: Update corenet64_smp_defconfig for T4240
* Add support for up to 24 cores on T4240 (includes threads)
* Enable AltiVec support (on T4240)
* Add T4240QDS board into build
* Other changes are due to general kernel update of defconfig

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-12 15:59:35 -05:00
Kumar Gala
b9faa360fa powerpc/fsl-booke: Add initial T4240QDS board support
Some minor changes to the common corenet_ds.c code are needed to support
the T4240QDS:
* Add support for "fsl,qoriq-pcie-v3.0" controller
* Bump max # of IRQs to 512 (T4240 supports more interrupts than
  previous SoCs).

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-12 15:59:34 -05:00
Kumar Gala
077f598ac7 powerpc/fsl-booke: Add initial T4240QDS board device tree
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-12 15:59:33 -05:00
Kumar Gala
3d7419714b powerpc/fsl-booke: Add initial silicon device tree for T4240
Enable a baseline T4240 SoC to boot.  There are several things missing
from the device trees for T4240:

* Proper PAMU topology information
* DPAA related nodes (Qman, Bman, Fman, Rman, DCE)
* Prefetch Manager
* Thermal monitor unit
* Interlaken

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Vakul Garg <vakul@freescale.com>
Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-12 15:59:32 -05:00
Kumar Gala
cd66cc2ee5 powerpc/85xx: Add AltiVec support for e6500
The e6500 core adds support for AltiVec on a Book-E class processor.
Connect up all the various exception handling code and build config
mechanisms to allow user spaces apps to utilize AltiVec.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2013-03-12 15:59:26 -05:00
Lai Jiangshan
362f2b098b async: rename and redefine async_func_ptr
A function type is typically defined as
typedef ret_type (*func)(args..)

but async_func_ptr is not.  Redefine it.

Also rename async_func_ptr to async_func_t for _func_t suffix is more generic.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
2013-03-12 13:59:14 -07:00
Lai Jiangshan
cc2a8b1a55 async: remove unused @node from struct async_domain
The @node in struct async_domain is unused after we introduce
async_global_pending, remove it.

tj: Unnecessary whitespace adjustments dropped.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
2013-03-12 13:59:14 -07:00
Lai Jiangshan
92266d6ef6 async: simplify lowest_in_progress()
The code in lowest_in_progress() are duplicated in two branches,
simplify them.

tj: Minor indentation adjustment.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
2013-03-12 13:59:13 -07:00
Jonas Gorski
b66c773002 spi/bcm63xx: use devm_ioremap_resource()
Use devm_ioremap_resource() which provides its own error messages.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:14:48 +00:00
Jonas Gorski
68792e2a19 spi/bcm63xx: inline hz usage in bcm63xx_spi_setup_transfer
bcm63xx_spi_setup_transfer is called from only one place, and that has
t always set, to hz will always be t->speed_hz - just use it directly in
the two places instead of moving it in a local variable.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:14:48 +00:00
Jonas Gorski
c94df49542 spi/bcm63xx: inline bcm63xx_spi_check_transfer
It only does one check, so just do the check directly in the caller.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:14:47 +00:00
Jonas Gorski
31e4eaaa54 spi/bcm63xx: remove spi chip select validity check
The check would belong in bcm63xx_spi_setup if the spi subsystem
weren't already doing the check for us, so just drop it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:14:46 +00:00
Jonas Gorski
58d8bebea5 spi/bcm63xx: simplify bcm63xx_spi_check_transfer
bcm63xx_spi_check_transfer is only called from one place that has
t always set, so directly check the transfer's bits_per_word.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:14:46 +00:00
Jonas Gorski
e2bdae0632 spi/bcm63xx: check spi bits_per_word in spi_setup
Instead of fixing up the bits_per_word (which the spi subsystem already
does for us), check it for supported values.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:14:45 +00:00
Jonas Gorski
52f83bbd65 spi/bcm63xx: remove unused variable bs from bcm63xx_spi_setup
It is only written, but never read.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:14:44 +00:00
Jonas Gorski
c3db2b0b14 spi/bcm63xx: remove unneeded debug message
The spi subsystem already provides this info in a more extensive
debug print except for the nsecs/bit - which wasn't calculated anyway
and fixed to 0.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:14:44 +00:00
Jonas Gorski
ef9ed4b9c9 spi/bcm63xx: remove duplicated mode bits check
The spi subsystem already checks the mode bits before calling setup.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:14:38 +00:00
Jonas Gorski
4fbb82a76d spi/bcm63xx: properly prepare clocks before enabling them
Use proper clk_prepare/unprepare calls in preparation for switching
to the generic clock framework.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:14:35 +00:00
Mark Brown
19533314f9 Merge branch 'spi-fix' into spi-next 2013-03-12 19:11:47 +00:00
Jonas Gorski
b435ff212e spi/bcm63xx: don't disable non enabled clocks in probe error path
When msg_ctl_width is set to an invalid value we try to disable the
clock despite it never being enabled. Fix it by jumping to the correct
label.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:11:31 +00:00
Kevin Cernekee
4a25b680b1 spi/bcm63xx: Remove unused variable
This fixes the following warning:

drivers/spi/spi-bcm63xx.c: In function 'bcm63xx_spi_setup':
drivers/spi/spi-bcm63xx.c:157:6: warning: unused variable 'ret'

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:11:21 +00:00
Laxman Dewangan
d558c47337 spi: slink-tegra20: move runtime pm calls to transfer_one_message
The prepare_transfer_hardware() is called in atomic context and
calling synchronous runtime pm calls can create scheduling deadlock.

Therefore, in place of calling runtime PM calls from prepare/unprepare
message transfer, calling this in transfer_one_message().

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:07:52 +00:00
Daniel Mack
ecf327c7ca ASoC: davinci-mcasp: clean up davinci_hw_common_param()
As pointed of by Vaibhav, commit 2952b27e2 ("ASoC: davinci-mcasp:
Add support for multichannel playback") duplicated the logic of
counting the active serializers. That can be avoided by shifting
the code around a bit.

Also, drop two unused defines introduced by the same commit.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Vaibhav Bedia <vaibhav.bedia@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 19:03:53 +00:00
Markus Pargmann
34913fd950 ASoC: pcm030 audio fabric: remove __init from probe
Remove probe function from the init section.

Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 18:55:26 +00:00
Sascha Hauer
b6e51600f4 ASoC: imx-ssi: Fix occasional AC97 reset failure
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
2013-03-12 18:53:38 +00:00
Sascha Hauer
c1963c37ad ASoC: imx-ssi: Fix AC97 rates
This device supports multiple rates as described in later AC97
standards. This patch allows playback of different sample frequencies
without conversion.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 18:51:38 +00:00
Tim Gardner
1f5353e765 ASoC: wm_hubs: Silence reg_r and reg_l 'may be used uninitialized' warnings
Return an error from wm_hubs_read_dc_servo() if hubs->dcs_readback_mode is not
correctly initialized. You might as well bail out since nothing is likely to
work correctly afterwards.

sound/soc/codecs/wm_hubs.c:321:11: warning: 'reg_r' may be used uninitialized in this function [-Wuninitialized]
sound/soc/codecs/wm_hubs.c:251:13: note: 'reg_r' was declared here
sound/soc/codecs/wm_hubs.c:322:11: warning: 'reg_l' may be used uninitialized in this function [-Wuninitialized]
sound/soc/codecs/wm_hubs.c:251:6: note: 'reg_l' was declared here

gcc version 4.6.3

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 18:50:00 +00:00
Tim Gardner
14a1b8ca17 ASoC: adau1373: adau1373_hw_params: Silence overflow warning
ADAU1373_BCLKDIV_SOURCE is defined as BIT(5) which uses UL constants. On
amd64 the result of the ones complement operator is then truncated to
unsigned int according to the prototype of snd_soc_update_bits(). I think
gcc is correctly warning that the upper 32 bits are lost.

sound/soc/codecs/adau1373.c: In function 'adau1373_hw_params':
sound/soc/codecs/adau1373.c:940:3: warning: large integer implicitly truncated to unsigned type [-Woverflow]

gcc version 4.6.3

Add 2 more BCLKDIV mask macros as explained by Lars:

The BCLKDIV has three fields. The bitclock divider (bit 0-1), the samplerate
(bit 2-4) and the source select (bit 5). Here we want to update the bitclock
divider field and the samplerate field. When I wrote the code I was lazy and
used ~ADAU1373_BCLKDIV_SOURCE as the mask, which for this register is
functionally equivalent to ADAU1373_BCLKDIV_SR_MASK | ADAU1373_BCLKDIV_BCLK_MASK.

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 18:46:27 +00:00
H Hartley Sweeten
ca4d4aa6b7 staging: comedi: ni_atmio: fix build errors
The following commits introduced a couple build errors in this driver
due to the removal of some macros in ni_stc.h.

commit: f5a1d92b "staging: comedi: ni_stc.h: remove n_ni_boards macro"
commit: 6293e357 "staging: comedi: ni_stc.h: remove boardtype macro"

The n_ni_boards macro is an open coded version of ARRAY_SIZE.

The boardtype macro is removed in favor of using the comedi_board()
helper and accessing the boardinfo with a pointer.

Fix both issues.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-12 11:46:08 -07:00
Wei Yongjun
e8b18addee ASoC: core: fix possible memory leak in snd_soc_bytes_put()
'data' is malloced in snd_soc_bytes_put() and should be freed
before leaving from the error handling cases, otherwise it will cause
memory leak.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 18:42:59 +00:00
Wei Yongjun
f4b828128a ASoC: wm_adsp: fix possible memory leak in wm_adsp_load_coeff()
'file' is malloced in wm_adsp_load_coeff() and should be freed
before leaving from the error handling cases, otherwise it will cause
memory leak.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 18:42:06 +00:00
Tejun Heo
226223ab3c workqueue: implement sysfs interface for workqueues
There are cases where workqueue users want to expose control knobs to
userland.  e.g. Unbound workqueues with custom attributes are
scheduled to be used for writeback workers and depending on
configuration it can be useful to allow admins to tinker with the
priority or allowed CPUs.

This patch implements workqueue_sysfs_register(), which makes the
workqueue visible under /sys/bus/workqueue/devices/WQ_NAME.  There
currently are two attributes common to both per-cpu and unbound pools
and extra attributes for unbound pools including nice level and
cpumask.

If alloc_workqueue*() is called with WQ_SYSFS,
workqueue_sysfs_register() is called automatically as part of
workqueue creation.  This is the preferred method unless the workqueue
user wants to apply workqueue_attrs before making the workqueue
visible to userland.

v2: Disallow exposing ordered workqueues as ordered workqueues can't
    be tuned in any way.

Signed-off-by: Tejun Heo <tj@kernel.org>
2013-03-12 11:37:07 -07:00
Tejun Heo
36b519dfc7 Merge branch 'for-3.10-subsys_virtual_register' into for-3.10 2013-03-12 11:36:51 -07:00
Tejun Heo
d73ce00422 driver/base: implement subsys_virtual_register()
Kay tells me the most appropriate place to expose workqueues to
userland would be /sys/devices/virtual/workqueues/WQ_NAME which is
symlinked to /sys/bus/workqueue/devices/WQ_NAME and that we're lacking
a way to do that outside of driver core as virtual_device_parent()
isn't exported and there's no inteface to conveniently create a
virtual subsystem.

This patch implements subsys_virtual_register() by factoring out
subsys_register() from subsys_system_register() and using it with
virtual_device_parent() as the origin directory.  It's identical to
subsys_system_register() other than the origin directory but we aren't
gonna restrict the device names which should be used under it.

This will be used to expose workqueue attributes to userland.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
2013-03-12 11:36:35 -07:00
Kuninori Morimoto
e1328a832c ASoC: core: remove codec from list if registration failed
Current snd_soc_register_codec() adds codec to list, and calls
snd_soc_register_dais().
But, this listed codec should be removed if dais registration
was failed.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 18:34:59 +00:00
Mark Brown
2db6be6a7b Linux 3.9-rc2
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJRPR09AAoJEHm+PkMAQRiGQLoIAJpgaFDY2bRKuApUOu61sU2b
 Cwiza9m0TZrGMUguXE7suudfC4i8PRkaOZOJWk6TUg/nTT1cl4kNscasgFamKGt4
 zcpiooVnox1e7gpWS1P9NWpuVY7pFC87FrN4dbXgFs45slYNy+sGlTp9/LMviZ13
 mR3aTG2R7o4GBapD+gpqX8hroV53o8X12kjln6aLghoNLfEdtlAawoiWO5PTHHl8
 4Pu4DANoyA7Z9pIMT3++uTWl/BR4bbpBVFIqkUomUFRYFjtwhHBXr+ak11pK7jTt
 EJ5HYYIiOcm0v2nVvIovNwUKnWTNopK4P+bx/vgFjANpwV132v5nPuf/Ucoj0U0=
 =eQ4p
 -----END PGP SIGNATURE-----

Merge tag 'v3.9-rc2' into asoc-core

Linux 3.9-rc2
2013-03-12 18:34:39 +00:00
Mika Westerberg
0054e28dc9 spi/pxa2xx: enable multiblock DMA transfers for LPSS devices
Intel LPSS SPI controllers need to have bit 0 (disable_ssp_dma_finish) set
in SSP_REG in order to properly perform DMA transfers spanning over
multiple blocks.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 18:30:56 +00:00
Mika Westerberg
c134634077 spi/pxa2xx-pci: correct the return value check of pcim_iomap_regions()
The function returns 0 on success and negative errno in case of failure.
Fix this.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-03-12 18:30:56 +00:00
Tejun Heo
ba630e4940 cpumask: implement cpumask_parse()
We have cpulist_parse() but not cpumask_parse().  Implement it using
bitmap_parse().

bitmap_parse() is weird in that it takes @len for a string in
kernel-memory which also is inconsistent with bitmap_parselist().
Make cpumask_parse() calculate the length and don't expose the
inconsistency to cpumask users.  Maybe we can fix up bitmap_parse()
later.

This will be used to expose workqueue cpumask knobs to userland via
sysfs.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
2013-03-12 11:30:04 -07:00
Tejun Heo
8719dceae2 workqueue: reject adjusting max_active or applying attrs to ordered workqueues
Adjusting max_active of or applying new workqueue_attrs to an ordered
workqueue breaks its ordering guarantee.  The former is obvious.  The
latter is because applying attrs creates a new pwq (pool_workqueue)
and there is no ordering constraint between the old and new pwqs.

Make apply_workqueue_attrs() and workqueue_set_max_active() trigger
WARN_ON() if those operations are requested on an ordered workqueue
and fail / ignore respectively.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
2013-03-12 11:30:04 -07:00
Tejun Heo
618b01eb42 workqueue: make it clear that WQ_DRAINING is an internal flag
We're gonna add another internal WQ flag.  Let's make the distinction
clear.  Prefix WQ_DRAINING with __ and move it to bit 16.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
2013-03-12 11:30:04 -07:00
Tejun Heo
9e8cd2f589 workqueue: implement apply_workqueue_attrs()
Implement apply_workqueue_attrs() which applies workqueue_attrs to the
specified unbound workqueue by creating a new pwq (pool_workqueue)
linked to worker_pool with the specified attributes.

A new pwq is linked at the head of wq->pwqs instead of tail and
__queue_work() verifies that the first unbound pwq has positive refcnt
before choosing it for the actual queueing.  This is to cover the case
where creation of a new pwq races with queueing.  As base ref on a pwq
won't be dropped without making another pwq the first one,
__queue_work() is guaranteed to make progress and not add work item to
a dead pwq.

init_and_link_pwq() is updated to return the last first pwq the new
pwq replaced, which is put by apply_workqueue_attrs().

Note that apply_workqueue_attrs() is almost identical to unbound pwq
part of alloc_and_link_pwqs().  The only difference is that there is
no previous first pwq.  apply_workqueue_attrs() is implemented to
handle such cases and replaces unbound pwq handling in
alloc_and_link_pwqs().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
2013-03-12 11:30:04 -07:00
Tejun Heo
c9178087ac workqueue: perform non-reentrancy test when queueing to unbound workqueues too
Because per-cpu workqueues have multiple pwqs (pool_workqueues) to
serve the CPUs, to guarantee that a single work item isn't queued on
one pwq while still executing another, __queue_work() takes a look at
the previous pool the target work item was on and if it's still
executing there, queue the work item on that pool.

To support changing workqueue_attrs on the fly, unbound workqueues too
will have multiple pwqs and thus need non-reentrancy test when
queueing.  This patch modifies __queue_work() such that the reentrancy
test is performed regardless of the workqueue type.

per_cpu_ptr(wq->cpu_pwqs, cpu) used to be used to determine the
matching pwq for the last pool.  This can't be used for unbound
workqueues and is replaced with worker->current_pwq which also happens
to be simpler.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
2013-03-12 11:30:04 -07:00
Tejun Heo
75ccf5950f workqueue: prepare flush_workqueue() for dynamic creation and destrucion of unbound pool_workqueues
Unbound pwqs (pool_workqueues) will be dynamically created and
destroyed with the scheduled unbound workqueue w/ custom attributes
support.  This patch synchronizes pwq linking and unlinking against
flush_workqueue() so that its operation isn't disturbed by pwqs coming
and going.

Linking and unlinking a pwq into wq->pwqs is now protected also by
wq->flush_mutex and a new pwq's work_color is initialized to
wq->work_color during linking.  This ensures that pwqs changes don't
disturb flush_workqueue() in progress and the new pwq's work coloring
stays in sync with the rest of the workqueue.

flush_mutex during unlinking isn't strictly necessary but it's simpler
to do it anyway.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
2013-03-12 11:30:04 -07:00
Tejun Heo
8864b4e59f workqueue: implement get/put_pwq()
Add pool_workqueue->refcnt along with get/put_pwq().  Both per-cpu and
unbound pwqs have refcnts and any work item inserted on a pwq
increments the refcnt which is dropped when the work item finishes.

For per-cpu pwqs the base ref is never dropped and destroy_workqueue()
frees the pwqs as before.  For unbound ones, destroy_workqueue()
simply drops the base ref on the first pwq.  When the refcnt reaches
zero, pwq_unbound_release_workfn() is scheduled on system_wq, which
unlinks the pwq, puts the associated pool and frees the pwq and wq as
necessary.  This needs to be done from a work item as put_pwq() needs
to be protected by pool->lock but release can't happen with the lock
held - e.g. put_unbound_pool() involves blocking operations.

Unbound pool->locks are marked with lockdep subclas 1 as put_pwq()
will schedule the release work item on system_wq while holding the
unbound pool's lock and triggers recursive locking warning spuriously.

This will be used to implement dynamic creation and destruction of
unbound pwqs.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
2013-03-12 11:30:04 -07:00
Tejun Heo
d2c1d40487 workqueue: restructure __alloc_workqueue_key()
* Move initialization and linking of pool_workqueues into
  init_and_link_pwq().

* Make the failure path use destroy_workqueue() once pool_workqueue
  initialization succeeds.

These changes are to prepare for dynamic management of pool_workqueues
and don't introduce any functional changes.

While at it, convert list_del(&wq->list) to list_del_init() as a
precaution as scheduled changes will make destruction more complex.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
2013-03-12 11:30:04 -07:00
Tejun Heo
493008a8e4 workqueue: drop WQ_RESCUER and test workqueue->rescuer for NULL instead
WQ_RESCUER is superflous.  WQ_MEM_RECLAIM indicates that the user
wants a rescuer and testing wq->rescuer for NULL can answer whether a
given workqueue has a rescuer or not.  Drop WQ_RESCUER and test
wq->rescuer directly.

This will help simplifying __alloc_workqueue_key() failure path by
allowing it to use destroy_workqueue() on a partially constructed
workqueue, which in turn will help implementing dynamic management of
pool_workqueues.

While at it, clear wq->rescuer after freeing it in
destroy_workqueue().  This is a precaution as scheduled changes will
make destruction more complex.

This patch doesn't introduce any functional changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
2013-03-12 11:30:03 -07:00