In the case of a Synchronized Receiver capable device, enable at start-up the
events for PA reports, PA Sync Established and Big Info Adv reports.
Signed-off-by: Claudia Draghicescu <claudia.rosu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
New Intel platforms supports reset of Bluetooth device via ACPI DSM
methods. The legacy reset mechanism via GPIO will be deprecated in
future. This patch checks the platform support for reset methods and if
supported uses the same instead of legacy GPIO toggling method.
ACPI firmware supports two types of reset method based on NIC card.
(Discrete or Integrated).
1. VSEC Type - Vendor Specific Extended Capability. Here BT_EN and
BT_IF_SELECT lines are driven by a register in PCH cluster. This
interface is supported on discrete BT solution.
2. WDISABLE2 - In this soluton, W_DISABLE2 pin in M.2 is connected to
physical GPIO from PCH. The DSM interface shall toggle this to recover
from error.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Intercept debug exception events from QCA controller and put them into
a devcoredump using hci devcoredump APIs of hci_core
Signed-off-by: Sai Teja Aluvala <quic_saluvala@quicinc.com>
V2 -> V3:
---------
changed hci_coredump_qca function
V1 -> V2:
---------
Updated to work with the updated HCI devcoredump API.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch implements the hci_qca driver side .coredump() callback to
trigger a devcoredump via sysfs.
Signed-off-by: Sai Teja Aluvala <quic_saluvala@quicinc.com>
v2 -> V3:
--------
Updated commit text
v1 -> V2:
--------
Updated to work with the updated HCI devcoredump API.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for creating multiple BIGs. According to
spec, each BIG shall have an unique handle, and each BIG should
be associated with a different advertising handle. Otherwise,
the LE Create BIG command will fail, with error code
Command Disallowed (for reusing a BIG handle), or
Unknown Advertising Identifier (for reusing an advertising
handle).
The btmon snippet below shows an exercise for creating two BIGs
for the same controller, by opening two isotest instances with
the following command:
tools/isotest -i hci0 -s 00:00:00:00:00:00
< HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31
Handle: 0x00
Advertising Handle: 0x01
Number of BIS: 1
SDU Interval: 10000 us (0x002710)
Maximum SDU size: 40
Maximum Latency: 10 ms (0x000a)
RTN: 0x02
PHY: LE 2M (0x02)
Packing: Sequential (0x00)
Framing: Unframed (0x00)
Encryption: 0x00
Broadcast Code: 00000000000000000000000000000000
> HCI Event: Command Status (0x0f) plen 4
LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 21
LE Broadcast Isochronous Group Complete (0x1b)
Status: Success (0x00)
Handle: 0x00
BIG Synchronization Delay: 912 us (0x000390)
Transport Latency: 912 us (0x000390)
PHY: LE 2M (0x02)
NSE: 3
BN: 1
PTO: 1
IRC: 3
Maximum PDU: 40
ISO Interval: 10.00 msec (0x0008)
Connection Handle #0: 10
< HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068)
Handle: 0x01
Advertising Handle: 0x02
Number of BIS: 1
SDU Interval: 10000 us (0x002710)
Maximum SDU size: 40
Maximum Latency: 10 ms (0x000a)
RTN: 0x02
PHY: LE 2M (0x02)
Packing: Sequential (0x00)
Framing: Unframed (0x00)
Encryption: 0x00
Broadcast Code: 00000000000000000000000000000000
> HCI Event: Command Status (0x0f) plen 4
LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1
Status: Success (0x00)
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This stores scm_creds into hci_skb_cb so they can be properly forwarded
to the likes of btmon which is then able to print information about the
process who is originating the traffic:
bluetoothd[35]: @ MGMT Command: Rea.. (0x0001) plen 0 {0x0001}
@ MGMT Event: Command Complete (0x0001) plen 6 {0x0001}
Read Management Version Information (0x0001) plen 3
bluetoothd[35]: < ACL Data T.. flags 0x00 dlen 41
ATT: Write Command (0x52) len 36
Handle: 0x0043 Type: ASE Control Point (0x2bc6)
Data: 020203000110270000022800020a00409c0001000110270000022800020a00409c00
Opcode: QoS Configuration (0x02)
Number of ASE(s): 2
ASE: #0
ASE ID: 0x03
CIG ID: 0x00
CIS ID: 0x01
SDU Interval: 10000 usec
Framing: Unframed (0x00)
PHY: 0x02
LE 2M PHY (0x02)
Max SDU: 40
RTN: 2
Max Transport Latency: 10
Presentation Delay: 40000 us
ASE: #1
ASE ID: 0x01
CIG ID: 0x00
CIS ID: 0x01
SDU Interval: 10000 usec
Framing: Unframed (0x00)
PHY: 0x02
LE 2M PHY (0x02)
Max SDU: 40
RTN: 2
Max Transport Latency: 10
Presentation Delay: 40000 us
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure peer information is always available via sock when using
bt_sock_alloc.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This consolidates code around sk_alloc into bt_sock_alloc which does
take care of common initialization.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The original code did not determine the length value of the HCI command
for drop fw even there's no parameter needed. In this commit, use struct
hci_command_hdr to manage opcode and length. It would be more regular and
more readable.
Suggested-by: Alex Lu <alex_lu@realsil.com.cn>
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In
6524c798b7 ("driver core: cpu: Make cpu_show_not_affected() static")
I fat-fingered the name of cpu_show_gds(). Usually, I'd rebase but since
those are extraordinary embargoed times, the commit above was already
pulled into another tree so no no.
Therefore, fix it ontop.
Fixes: 6524c798b7 ("driver core: cpu: Make cpu_show_not_affected() static")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230811095831.27513-1-bp@alien8.de
LE Create CIS command shall not be sent before all CIS Established
events from its previous invocation have been processed. Currently it is
sent via hci_sync but that only waits for the first event, but there can
be multiple.
Make it wait for all events, and simplify the CIS creation as follows:
Add new flag HCI_CONN_CREATE_CIS, which is set if Create CIS has been
sent for the connection but it is not yet completed.
Make BT_CONNECT state to mean the connection wants Create CIS.
On events after which new Create CIS may need to be sent, send it if
possible and some connections need it. These events are:
hci_connect_cis, iso_connect_cfm, hci_cs_le_create_cis,
hci_le_cis_estabilished_evt.
The Create CIS status/completion events shall queue new Create CIS only
if at least one of the connections transitions away from BT_CONNECT, so
that we don't loop if controller is sending bogus events.
This fixes sending multiple CIS Create for the same CIS in the
"ISO AC 6(i) - Success" BlueZ test case:
< HCI Command: LE Create Co.. (0x08|0x0064) plen 9 #129 [hci0]
Number of CIS: 2
CIS Handle: 257
ACL Handle: 42
CIS Handle: 258
ACL Handle: 42
> HCI Event: Command Status (0x0f) plen 4 #130 [hci0]
LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 29 #131 [hci0]
LE Connected Isochronous Stream Established (0x19)
Status: Success (0x00)
Connection Handle: 257
...
< HCI Command: LE Setup Is.. (0x08|0x006e) plen 13 #132 [hci0]
...
> HCI Event: Command Complete (0x0e) plen 6 #133 [hci0]
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
...
< HCI Command: LE Create Co.. (0x08|0x0064) plen 5 #134 [hci0]
Number of CIS: 1
CIS Handle: 258
ACL Handle: 42
> HCI Event: Command Status (0x0f) plen 4 #135 [hci0]
LE Create Connected Isochronous Stream (0x08|0x0064) ncmd 1
Status: ACL Connection Already Exists (0x0b)
> HCI Event: LE Meta Event (0x3e) plen 29 #136 [hci0]
LE Connected Isochronous Stream Established (0x19)
Status: Success (0x00)
Connection Handle: 258
...
Fixes: c09b80be6f ("Bluetooth: hci_conn: Fix not waiting for HCI_EVT_LE_CIS_ESTABLISHED")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It is required for some configurations to have multiple BISes as part
of the same BIG.
Similar to the flow implemented for unicast, DEFER_SETUP will also be
used to bind multiple BISes for the same BIG, before starting Periodic
Advertising and creating the BIG.
The user will have to open a new socket for each BIS. By setting the
BT_DEFER_SETUP socket option and calling connect, a new connection
will be added for the BIG and advertising handle set by the socket
QoS parameters. Since all BISes will be bound for the same BIG and
advertising handle, the socket QoS options and base parameters should
match for all connections.
By calling connect on a socket that does not have the BT_DEFER_SETUP
option set, periodic advertising will be started and the BIG will
be created, with a BIS for each previously bound connection. Since
a BIG cannot be reconfigured with additional BISes after creation,
no more connections can be bound for the BIG after the start periodic
advertising and create BIG commands have been queued.
The bis_cleanup function has also been updated, so that the advertising
set and the BIG will not be terminated unless there are no more
bound or connected BISes.
The HCI_CONN_BIG_CREATED connection flag has been added to indicate
that the BIG has been successfully created. This flag is checked at
bis_cleanup, so that the BIG is only terminated if the
HCI_LE_Create_BIG_Complete has been received.
This implementation has been tested on hardware, using the "isotest"
tool with an additional command line option, to specify the number of
BISes to create as part of the desired BIG:
tools/isotest -i hci0 -s 00:00:00:00:00:00 -N 2 -G 1 -T 1
The btmon log shows that a BIG containing 2 BISes has been created:
< HCI Command: LE Create Broadcast Isochronous Group (0x08|0x0068) plen 31
Handle: 0x01
Advertising Handle: 0x01
Number of BIS: 2
SDU Interval: 10000 us (0x002710)
Maximum SDU size: 40
Maximum Latency: 10 ms (0x000a)
RTN: 0x02
PHY: LE 2M (0x02)
Packing: Sequential (0x00)
Framing: Unframed (0x00)
Encryption: 0x00
Broadcast Code: 00000000000000000000000000000000
> HCI Event: Command Status (0x0f) plen 4
LE Create Broadcast Isochronous Group (0x08|0x0068) ncmd 1
Status: Success (0x00)
> HCI Event: LE Meta Event (0x3e) plen 23
LE Broadcast Isochronous Group Complete (0x1b)
Status: Success (0x00)
Handle: 0x01
BIG Synchronization Delay: 1974 us (0x0007b6)
Transport Latency: 1974 us (0x0007b6)
PHY: LE 2M (0x02)
NSE: 3
BN: 1
PTO: 1
IRC: 3
Maximum PDU: 40
ISO Interval: 10.00 msec (0x0008)
Connection Handle #0: 10
Connection Handle #1: 11
< HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13
Handle: 10
Data Path Direction: Input (Host to Controller) (0x00)
Data Path: HCI (0x00)
Coding Format: Transparent (0x03)
Company Codec ID: Ericsson Technology Licensing (0)
Vendor Codec ID: 0
Controller Delay: 0 us (0x000000)
Codec Configuration Length: 0
Codec Configuration:
> HCI Event: Command Complete (0x0e) plen 6
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
Status: Success (0x00)
Handle: 10
< HCI Command: LE Setup Isochronous Data Path (0x08|0x006e) plen 13
Handle: 11
Data Path Direction: Input (Host to Controller) (0x00)
Data Path: HCI (0x00)
Coding Format: Transparent (0x03)
Company Codec ID: Ericsson Technology Licensing (0)
Vendor Codec ID: 0
Controller Delay: 0 us (0x000000)
Codec Configuration Length: 0
Codec Configuration:
> HCI Event: Command Complete (0x0e) plen 6
LE Setup Isochronous Data Path (0x08|0x006e) ncmd 1
Status: Success (0x00)
Handle: 11
< ISO Data TX: Handle 10 flags 0x02 dlen 44
< ISO Data TX: Handle 11 flags 0x02 dlen 44
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 10
Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5
Num handles: 1
Handle: 11
Count: 1
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Catch debug exception from controller and driver, and trigger a
devcoredump using hci devcoredump APIs. The debug exception data
will be parsed in userspace.
Signed-off-by: Alex Lu <alex_lu@realsil.com.cn>
Signed-off-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch checks for ISO_BROADCASTER and ISO_SYNC_RECEIVER in
controller.
Signed-off-by: Claudia Draghicescu <claudia.rosu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix missing symbol seen in:
```
19: 'import perf' in python :
--- start ---
test child forked, pid 2640936
python usage test: "echo "import sys ; sys.path.insert(0, 'python'); import perf" | '/usr/bin/python3' "
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: tools/perf/python/perf.cpython-311-x86_64-linux-gnu.so: undefined symbol: perf_pmus__supports_extended_type
test child finished with -1
---- end ----
'import perf' in python: FAILED!
```
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20230810180944.2794188-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge a cpufreq fix for 6.5-rc6.
This makes amd-pstate use device_attributes as expected by the CPU root
kobject.
* pm-cpufreq:
cpufreq: amd-pstate: fix global sysfs attribute type
Add initial device tree support for the Qualcomm IPQ5018 SoC and
rdp432-c2 board.
Few things like 'reboot' does not work because, couple of more 'SCM'
APIS are needed to clear some TrustZone settings. Those will be
posted separately.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Co-developed-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Link: https://lore.kernel.org/r/1690533192-22220-6-git-send-email-quic_srichara@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This patch adds support for the global clock controller found on
the IPQ5018 based devices.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Link: https://lore.kernel.org/r/1690533192-22220-2-git-send-email-quic_srichara@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the second MAC on sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-10-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Once we add a second ethernet node, the MDIO bus names will conflict
unless we provide aliases. Add one for the existing ethernet node.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-9-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
For improved readability order the aliases alphabetically for
sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-8-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a second SGMII PHY that will be used by EMAC1 on sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-7-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We'll be adding a second SGMII PHY on the same MDIO bus, so let's index
the first one for better readability.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-6-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Device-tree bindings for MDIO define per-PHY reset-gpios as well as a
global reset-gpios property at the MDIO node level which controls all
devices on the bus. The latter is most likely a workaround for the
chicken-and-egg problem where we cannot read the ID of the PHY before
bringing it out of reset but we cannot bring it out of reset until we've
read its ID.
I have proposed a comprehensive solution for this problem in 2020 but it
never got upstream. We do however have workaround in place which allows
us to hard-code the PHY id in the compatible property, thus skipping the
ID scanning.
Let's make the device-tree for sa8775p-ride slightly more correct by
moving the reset-gpios property to the PHY node with its ID put into the
PHY node's compatible.
Link: https://lore.kernel.org/all/20200622093744.13685-1-brgl@bgdev.pl/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-5-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the second SerDes PHY on sa8775p-ride development board.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-4-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a node for the second MAC on sa8775p platforms.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-3-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a node for the SerDes PHY used by EMAC1 on sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230810080909.6259-2-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Because the number of trip points in each thermal zone and their
types are known to intel_soc_dts_iosf_init() prior to the registration
of the thermal zones, make it create an array of struct thermal_trip
entries in each struct intel_soc_dts_sensor_entry object and make
add_dts_thermal_zone() use thermal_zone_device_register_with_trips()
for thermal zone registration and pass that array as its second
argument.
Drop the sys_get_trip_temp() and sys_get_trip_type() callback
functions along with the respective callback pointers in
tzone_ops, because they are not necessary any more.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Critical trip points appear in the DTS thermal zones only after those
thermal zones have been registered via intel_soc_dts_iosf_init().
Moreover, they are "created" by changing the type of an existing trip
point from THERMAL_TRIP_PASSIVE to THERMAL_TRIP_CRITICAL via
intel_soc_dts_iosf_add_read_only_critical_trip(), the caller of which
has to be careful enough to pass at least 1 as the number of read-only
trip points to intel_soc_dts_iosf_init() beforehand.
This is questionable, because user space may have started to use the
trips at the time when intel_soc_dts_iosf_add_read_only_critical_trip()
runs and there is no synchronization between it and sys_set_trip_temp().
To address it, use the observation that nonzero number of read-only
trip points is only passed to intel_soc_dts_iosf_init() when critical
trip points are going to be used, so in fact that function may get all
of the information regarding the critical trip points upfront and it
can configure them before registering the corresponding thermal zones.
Accordingly, replace the read_only_trip_count argument of
intel_soc_dts_iosf_init() with a pair of new arguments related to
critical trip points: a bool one indicating whether or not critical
trip points are to be used at all and an int one representing the
critical trip point temperature offset relative to Tj_max. Use these
arguments to configure the critical trip points before the registration
of the thermal zones and to compute the number of writeable trip points
in add_dts_thermal_zone().
Modify both callers of intel_soc_dts_iosf_init() to take these changes
into account and drop the intel_soc_dts_iosf_add_read_only_critical_trip()
call, that is not necessary any more, from intel_soc_thermal_init(),
which also allows it to return success right after requesting the IRQ.
Finally, drop intel_soc_dts_iosf_add_read_only_critical_trip()
altogether, because it does not have any more users.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Because trip points are reset for each sensor in two places in the
same way, add a helper function for that to reduce code duplication
a bit.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
The initial configuration of trip points in intel_soc_dts_iosf_init()
takes place after registering the sensor thermal zones which is
potentially problematic, because it may race with the setting of trip
point temperatures via sysfs, as there is no synchronization between it
and sys_set_trip_temp().
To address this, change the initialization ordering so that the trip
points are configured prior to the registration of thermal zones.
Accordingly, change the cleanup ordering in intel_soc_dts_iosf_exit()
to remove the thermal zones before resetting the trip points.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
After previous changes, update_trip_temp() only uses its dts argument to
get to the sensors field in the struct intel_soc_dts_sensor_entry object
pointed to by that argument, so pass the value of that field directly to
it instead.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Function update_trip_temp() is currently used for the initialization
of trip points as well as for changing trip point temperatures in
sys_set_trip_temp().
This is quite confusing and passing the value of dts->trip_types[trip]
to it so that it can store that value in the same memory location is
not particularly useful, because it only is necessary to set the
trip point type once, at the initialization time.
For this reason, drop the last argument from update_trip_temp() and
introduce configure_trip() calling the former internally for the
initial configuration of trip points.
Modify the majority of update_trip_temp() callers to use
configure_trip() instead of it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
None of the existing callers of intel_soc_dts_iosf_init() passes
INTEL_SOC_DTS_INTERRUPT_NONE as the first argument to it, so the
notification local variable in it is always true and the
notification_support argument of add_dts_thermal_zone() is always
true either.
For this reason, drop the notification local variable from
intel_soc_dts_iosf_init() and the notification_support argument from
add_dts_thermal_zone() and rearrange the latter to always set
writable_trip_cnt and trip_mask.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
We set empty registered buffers to dummy_ubuf as an optimisation.
Currently, we allocate the dummy entry for each ring, whenever we can
simply have one global instance.
We're casting out const on assignment, it's fine as we're not going to
change the content of the dummy, the constness gives us an extra layer
of protection if sth ever goes wrong.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/e4a96dda35ab755914bc43f6781bba0df97ac489.1691757663.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now all callers of io_aux_cqe() set allow_overflow to false, remove the
parameter and not allow overflowing auxilary multishot cqes.
When CQ is full the function callers and all multishot requests in
general are expected to complete the request. That prevents indefinite
in-background grows of the overflow list and let's the userspace to
handle the backlog at its own pace.
Resubmitting a request should also be faster than accounting a bunch of
overflows, so it should be better for perf when it happens, but a well
behaving userspace should be trying to avoid overflows in any case.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/bb20d14d708ea174721e58bb53786b0521e4dd6d.1691757663.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=/0Ra
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.5-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Add Manivannan Sadhasivam as DesignWare PCIe driver co-maintainer
(Krzysztof Wilczyński)
- Revert "PCI: dwc: Wait for link up only if link is started" to fix a
regression on Qualcomm platforms that don't reach interconnect sync
state if the slot is empty (Johan Hovold)
- Revert "PCI: mvebu: Mark driver as BROKEN" so people can use
pci-mvebu even though some others report problems (Bjorn Helgaas)
- Avoid a NULL pointer dereference when using acpiphp for root bus
hotplug to fix a regression added in v6.5-rc1 (Igor Mammedov)
* tag 'pci-v6.5-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus
Revert "PCI: mvebu: Mark driver as BROKEN"
Revert "PCI: dwc: Wait for link up only if link is started"
MAINTAINERS: Add Manivannan Sadhasivam as DesignWare PCIe driver maintainer
All we really care about is finding a free worker. If said worker is
already running, it's either starting new work already or it's just
finishing up existing work. For the latter, we'll be finding this work
item next anyway, and for the former, if the worker does go to sleep,
it'll create a new worker anyway as we have pending items.
This reduces try_to_wake_up() overhead considerably:
23.16% -10.46% [kernel.kallsyms] [k] try_to_wake_up
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we check if we have work to run, we grab the acct lock, check,
drop it, and then return the result. If we do have work to run, then
running the work will again grab acct->lock and get the work item.
This causes us to grab acct->lock more frequently than we need to.
If we have work to do, have io_acct_run_queue() return with the acct
lock still acquired. io_worker_handle_work() is then always invoked
with the acct lock already held.
In a simple test cases that stats files (IORING_OP_STATX always hits
io-wq), we see a nice reduction in locking overhead with this change:
19.32% -12.55% [kernel.kallsyms] [k] __cmpwait_case_32
20.90% -12.07% [kernel.kallsyms] [k] queued_spin_lock_slowpath
Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>