Commit graph

1,215,304 commits

Author SHA1 Message Date
Jens Axboe
78848b9b05 io_uring/io-wq: don't grab wq->lock for worker activation
The worker free list is RCU protected, and checks for workers going away
when iterating it. There's no need to hold the wq->lock around the
lookup.

Reviewed-by: Hao Xu <howeyxu@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-11 10:36:12 -06:00
Aneesh Kumar K.V
feb72e9b20 nvdimm/pfn_dev: Avoid unnecessary endian conversion
use the local variable that already have the converted values.

No functional change in this patch.

Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/20230809053512.350660-2-aneesh.kumar@linux.ibm.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2023-08-11 09:15:05 -07:00
Aneesh Kumar K.V
e96d9a938e nvdimm/pfn_dev: Prevent the creation of zero-sized namespaces
On architectures that have different page size values used for kernel
direct mapping and userspace mappings, the user can end up creating zero-sized
namespaces as shown below

:/sys/bus/nd/devices/region1# cat align
0x1000000
/sys/bus/nd/devices/region1# echo 0x200000 > align
/sys/bus/nd/devices/region1/dax1.0# cat supported_alignments
65536 16777216
 $ ndctl create-namespace -r region1 -m devdax -s 18M --align 64K
{
  "dev":"namespace1.0",
  "mode":"devdax",
  "map":"dev",
  "size":0,
  "uuid":"3094329a-0c66-4905-847e-357223e56ab0",
  "daxregion":{
    "id":1,
    "size":0,
    "align":65536
  },
  "align":65536
}
similarily for fsdax

 $ ndctl create-namespace -r region1 -m fsdax  -s 18M --align 64K
{
  "dev":"namespace1.0",
  "mode":"fsdax",
  "map":"dev",
  "size":0,
  "uuid":"45538a6f-dec7-405d-b1da-2a4075e06232",
  "sector_size":512,
  "align":65536,
  "blockdev":"pmem1"
}

In commit 9ffc1d19fc ("mm/memremap_pages: Introduce memremap_compat_align()")
memremap_compat_align was added to make sure the kernel always creates
namespaces with 16MB alignment. But the user can still override the
region alignment and no input validation is done in the region alignment
values to retain the flexibility user had before. However, the kernel
ensures that only part of the namespace that can be mapped via kernel
direct mapping page size is enabled. This is achieved by tracking the
unmapped part of the namespace in pfn_sb->end_trunc. The kernel also
ensures that the start address of the namespace is also aligned to the
kernel direct mapping page size.

Depending on the user request, the kernel implements userspace mapping
alignment by updating pfn device alignment attribute and this value is
used to adjust the start address for userspace mappings. This is tracked
in pfn_sb->dataoff. Hence the available size for userspace mapping is:

usermapping_size = size of the namespace - pfn_sb->end_trun - pfn_sb->dataoff

If the kernel finds the user mapping size zero then don't allow the
creation of namespace.

After fix:
$ ndctl create-namespace -f  -r region1 -m devdax  -s 18M --align 64K
libndctl: ndctl_dax_enable: dax1.1: failed to enable
  Error: namespace1.2: failed to enable

failed to create namespace: No such device or address

And existing zero sized namespace will be marked disabled.
root@ltczz75-lp2:/home/kvaneesh# ndctl  list -N -r region1 -i
[
  {
    "dev":"namespace1.0",
    "mode":"raw",
    "size":18874368,
    "uuid":"94a90fb0-8e78-4fb6-a759-ffc62f9fa181",
    "sector_size":512,
    "state":"disabled"
  },

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/20230809053512.350660-1-aneesh.kumar@linux.ibm.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
2023-08-11 09:15:04 -07:00
Linus Torvalds
2a3c17edbf RISC-V Fixes for 6.5-rc6
* Fixes for a pair of kexec_file_load() failures.
 * A fix to ensure the direct mapping is PMD-aligned.
 * A fix for CPU feature detection on SMP=n
 * The MMIO ordering fences have been strengthened to ensure ordering
   WRT delay().
 * Fixes for a pair of -Wmissing-variable-declarations warnings.
 * A fix to avoid PUD mappings in vmap on sv39.
 * flush_cache_vmap() now flushes the TLB to avoid issues on systems that
   cache invalid mappings.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmTWVmUTHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRAuExnzX7sYiVQXD/9BeoO5cwavjj7OH7I4DG9LZ3Gs+4j7
 tHFlE2jSBiqrkAfl8bdTYKagZdyg8WoswnaekeahcxnPFmrDl8Z+uqqAmf1Oy9Lg
 IMcaJL1YjPTK0sTs4uUrYr8TOFY3TrT8nhU5BwwUr/MWLFkiZsyUZbo8BoQlF06K
 xNcKfjxLSytkHitnhZXDYrHusCKRYX1OfvLMroxbRqu1bVqkKo0PvBwl5aSjhrp4
 EqyjAkJJkqq87OCUtNRHRbDSa/9FXE+bwdRg7gElVCRza81J9XfGTc7Dv1vvfElb
 LpUMyaNU0pR8eobCfUMcDxm+0PyaB3h9b+1oLfnRdmAwnNx+ObobygR2cONCRrJ6
 mwDcc1tw5bca29NZ8xJacKrpxPZ9TNi2CJnjsnx71eHAeUmMxbWRchHceOLH7uZo
 4fg59knQQKl//vkxmMumOBlg83qs3g8YlYgoe/PF9oI5kWJWeglyGjSJ9YfsCFpK
 Y4fGqZFg2FJUZY8mM9yvRoH0k36UMETfvZGgXgFscMUMeJfHUAshQMQHKIx5hWbR
 3iL48cY8RtPsjfUh7NdaAJESF89v/ByJUTnAXG0JTv2GGO2XQVQ11UfnaBsdUB7C
 IqQvLn7vmoGZslxTmAqlrwN/v9CTPBkXBXUOJXr7bJ+hbWXr3OY2vmJZklY6Jx8G
 Mv0Mez3Y9KOmSg==
 =ZUbT
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

 - Fixes for a pair of kexec_file_load() failures

 - A fix to ensure the direct mapping is PMD-aligned

 - A fix for CPU feature detection on SMP=n

 - The MMIO ordering fences have been strengthened to ensure ordering
   WRT delay()

 - Fixes for a pair of -Wmissing-variable-declarations warnings

 - A fix to avoid PUD mappings in vmap on sv39

 - flush_cache_vmap() now flushes the TLB to avoid issues on systems
   that cache invalid mappings

* tag 'riscv-for-linus-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Implement flush_cache_vmap()
  riscv: Do not allow vmap pud mappings for 3-level page table
  riscv: mm: fix 2 instances of -Wmissing-variable-declarations
  riscv,mmio: Fix readX()-to-delay() ordering
  riscv: Fix CPU feature detection with SMP disabled
  riscv: Start of DRAM should at least be aligned on PMD size for the direct mapping
  riscv/kexec: load initrd high in available memory
  riscv/kexec: handle R_RISCV_CALL_PLT relocation type
2023-08-11 09:12:44 -07:00
Linus Torvalds
feb0eee9aa parisc architecture fixes for kernel v6.5-rc6:
- Fix LWS code to use same lock words as for the parisc lightweight
   spinlocks
 - Use PTR_ERR_OR_ZERO() in pdt init code
 - Fix lots of sparse warnings
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZNZG5AAKCRD3ErUQojoP
 X4tuAP90TJxRks6fRoqZfiNQEd5gXXWnSY5fhbwsMvEONQChcgEAhUVEJB+oYfH1
 XZC0Sy1+hJtYuPHUMmJi8aKlKfbkSAw=
 =LvUn
 -----END PGP SIGNATURE-----

Merge tag 'parisc-for-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull parisc architecture fixes from Helge Deller:
 "A bugfix in the LWS code, which used different lock words than the
  parisc lightweight spinlock checks. This inconsistency triggered false
  positives when the lightweight spinlock checks checked the locks of
  mutexes.

  The other patches are trivial cleanups and most of them fix sparse
  warnings.

  Summary:

   - Fix LWS code to use same lock words as for the parisc lightweight
     spinlocks

   - Use PTR_ERR_OR_ZERO() in pdt init code

   - Fix lots of sparse warnings"

* tag 'parisc-for-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: perf: Make cpu_device variable static
  parisc: ftrace: Add declaration for ftrace_function_trampoline()
  parisc: boot: Nuke some sparse warnings in decompressor
  parisc: processor: Include asm/smp.h for init_per_cpu()
  parisc: unaligned: Include linux/sysctl.h for unaligned_enabled
  parisc: Move proc_mckinley_root and proc_runway_root to sba_iommu
  parisc: dma: Add prototype for pcxl_dma_start
  parisc: parisc_ksyms: Include libgcc.h for libgcc prototypes
  parisc: ucmpdi2: Fix no previous prototype for '__ucmpdi2' warning
  parisc: firmware: Mark pdc_result buffers local
  parisc: firmware: Fix sparse context imbalance warnings
  parisc: signal: Fix sparse incorrect type in assignment warning
  parisc: ioremap: Fix sparse warnings
  parisc: fault: Use C99 arrary initializers
  parisc: pdt: Use PTR_ERR_OR_ZERO() to simplify code
  parisc: Fix lightweight spinlock checks to not break futexes
2023-08-11 09:07:23 -07:00
Justin Ernst
1393bc8c6a x86/uv: Update HPE Superdome Flex Maintainers
Mike Travis has retired. His expertise will be sorely missed.
Remove Mike's entry under SGI XP/XPC/XPNET DRIVER.
Replace Mike's entry under UV HPE SUPERDOME FLEX.

Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Joel Granados <j.granados@samsung.com>
Link: https://lore.kernel.org/all/20230801155756.22308-1-justin.ernst%40hpe.com
2023-08-11 09:02:39 -07:00
Linus Torvalds
2a5482c284 cpuidle: psci
- Fix the error path to prevent reverting from OSI back to PC mode
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmTWEnwXHHVsZi5oYW5z
 c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCnhEA/+P0fFhNNlSWD9oZLDf+Ehe71z
 i2nA+n0vvjWQZqUfFtTlrc/3umtMSqxvM7G0ojItruJhqKJp1PqA+3WowF+cyR1r
 0o2ynpuSbNPPthGa+Fyw/2n5LXHih9odkNfXhugUbghkZiE7DTUaOZO7h0hajXjE
 VMKfgoaig5iIJOfdxiHs8PyRvWxqQvJeYzG9ciZgxkW1O/eJi0u5ftP6Tvp6i7rc
 GmpqOF/aRoNU4S+anxxI0ovfVb0mzAE9A46lSWBErHXfBPYm4zntVkwxjcI8U1Gk
 ICuYrMdkqQilJjz+Tib2wrL5ClqszoIS1NOr+7hAyXKd9RFWIf8E0K9aZ9qH353e
 jKG1NgekgG07r07G/31yX6Nv/EOfeVlv/0V1V9qnEhnbf8otlT2pjk4l3oxWwGIo
 wxrvx6zLSKWQGDxzkzIhtzLXqG/QMIiXW2py/s4D3oK2cQZRtb8IwfnR6rRj7rla
 DcEA50Tb2BDW97rmumB4haGe6RS0fduKzX0kb+bLzYAOpcW5/n53RweAQUl6kb0n
 CnJEMyC/8MFD+FXWrdCz+uUclJh+sQOZumPKzgN2FlY/RolBdfbGssb20gYKHkBZ
 dwo8GcxsDdNxuZQy+Xdiyqr8fsWggH74F4XiVQm2dyvDSRv9oy+so6gSHoWnVIEZ
 D1UGjuXiTAsaxEZ2bQ4=
 =rDCc
 -----END PGP SIGNATURE-----

Merge tag 'cpuidle-psci-v6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm

Pull cpuidle psci fixes from Ulf Hansson:
 "A couple of cpuidle-psci fixes. Usually, this is managed by arm-soc
  maintainers or Rafael, although due to a busy period I have stepped in
  to help out:

   - Fix the error path to prevent reverting from OSI back to PC mode"

* tag 'cpuidle-psci-v6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
  cpuidle: psci: Move enabling OSI mode after power domains creation
  cpuidle: dt_idle_genpd: Add helper function to remove genpd topology
2023-08-11 09:00:31 -07:00
Linus Torvalds
9b1b1b74dd drm fixes for 6.4-rc6
amdgpu:
 - S/G display workaround for platforms with >= 64G of memory
 - S0i3 fix
 - SMU 13.0.0 fixes
 - Disable SMU 13.x OD features temporarily while the interface is reworked
   to enable additional functionality
 - Fix cursor gamma issues on DCN3+
 - SMU 13.0.6 fixes
 - Fix possible UAF in CS IOCTL
 - Polaris display regression fix
 - Only enable CP GFX shadowing on SR-IOV
 
 amdkfd:
 - Raven/Picasso KFD regression fix
 
 bridge:
 - it6505: runtime PM fix
 - lt9611: revert Do not generate HFP/HBP/HSA and EOT packet
 
 nouveau:
 - enable global memory loads for helper invocations for userspace driver
 - dp 1.3 dpcd+ workaround fix
 - remove unused function
 - revert incorrect NULL check
 
 accel/ivpu:
 - Add set_pages_array_wc/uc for internal buffers
 
 rockchip:
 - Don't spam logs in atomic check
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmTV080ACgkQDHTzWXnE
 hr6JOw//eB0X18Dg86uk95wYCBb6IVcUZSt7gVWUFNmyHgTLFuY01LqGijFhZyia
 Iws1TbShkeBxLzHx80t5VtznfRI69n2WJDkyUPx+bjW4KZob5oA4nN1mwd9RZFli
 4wYja2uAdhTFebRliD3pODWqYb5DfTr0N0jVWRftS0D/Pl6WbtKjKLwyQXdn+r5+
 wf8KUKYOYeTAqlJb7azDG3+7xSbhYOKX1LtUbHlsL02HqSmTA/tzRApBRHpkiU8i
 ks37zsFCb69OzUqaRtJ/sL8MNO2S4stqAq3Ltlxy0tCTKK4xf54y0LIl07Q4JzBK
 G4VKaNssikWtm8K51nN6kf2u5S6wfntttHlftq37tixjGgZRWUGH8SgePKT9oZ8C
 qH82q4BBYKfuF7SwRpo3FrjKijcZXKOgXdb1F/AqP4oHUcE6TDzBCKVbjrE82X6E
 YyZs3WQlTrUiGaFP0sZNkkDH7bSevoDHVXoRdZrEBFSUSQqOC+b/1UEhUW9PDRfu
 zqK/1Lg5MxbEqN1b4hYtao9J2cFjdTZ7/U+BIAvV6l9M13+BbbFm1ire0H/O2Kfd
 dvePpM5sg4Tl+9kHNmwL+jqchtmdh6+19rDg3z6YkYRJXW/zPc2QVS1f5NTzi6w1
 cxvlP1vRO/5RM+ZIPmDVe+gN2q2mAs8e065ItrcWDNcztVIAiFk=
 =iuoN
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-2023-08-11' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "This week's fixes, as expected amdgpu is probably a little larger
  since it skipped a week, but otherwise a few nouveau fixes, a couple
  of bridge, rockchip and ivpu fixes.

  amdgpu:
   - S/G display workaround for platforms with >= 64G of memory
   - S0i3 fix
   - SMU 13.0.0 fixes
   - Disable SMU 13.x OD features temporarily while the interface is
     reworked to enable additional functionality
   - Fix cursor gamma issues on DCN3+
   - SMU 13.0.6 fixes
   - Fix possible UAF in CS IOCTL
   - Polaris display regression fix
   - Only enable CP GFX shadowing on SR-IOV

  amdkfd:
   - Raven/Picasso KFD regression fix

  bridge:
   - it6505: runtime PM fix
   - lt9611: revert Do not generate HFP/HBP/HSA and EOT packet

  nouveau:
   - enable global memory loads for helper invocations for userspace
     driver
   - dp 1.3 dpcd+ workaround fix
   - remove unused function
   - revert incorrect NULL check

  accel/ivpu:
   - Add set_pages_array_wc/uc for internal buffers

  rockchip:
   - Don't spam logs in atomic check"

* tag 'drm-fixes-2023-08-11' of git://anongit.freedesktop.org/drm/drm: (23 commits)
  drm/shmem-helper: Reset vma->vm_ops before calling dma_buf_mmap()
  drm/amdkfd: disable IOMMUv2 support for Raven
  drm/amdkfd: disable IOMMUv2 support for KV/CZ
  drm/amdkfd: ignore crat by default
  drm/amdgpu/gfx11: only enable CP GFX shadowing on SR-IOV
  drm/amd/display: Fix a regression on Polaris cards
  drm/amdgpu: fix possible UAF in amdgpu_cs_pass1()
  drm/amd/pm: Fix SMU v13.0.6 energy reporting
  drm/amd/display: check attr flag before set cursor degamma on DCN3+
  drm/amd/pm: disable the SMU13 OD feature support temporarily
  drm/amd/pm: correct the pcie width for smu 13.0.0
  drm/amd/display: Don't show stack trace for missing eDP
  drm/amdgpu: Match against exact bootloader status
  drm/amd/pm: skip the RLC stop when S0i3 suspend for SMU v13.0.4/11
  drm/amd: Disable S/G for APUs when 64GB or more host memory
  drm/rockchip: Don't spam logs in atomic check
  accel/ivpu: Add set_pages_array_wc/uc for internal buffers
  drm/nouveau/disp: Revert a NULL check inside nouveau_connector_get_modes
  Revert "drm/bridge: lt9611: Do not generate HFP/HBP/HSA and EOT packet"
  drm/nouveau: remove unused tu102_gr_load() function
  ...
2023-08-11 08:53:58 -07:00
Robert Marko
b5ed7a5c1f ARM: dts: qcom: ipq4019: correct SDHCI XO clock
Using GCC_DCD_XO_CLK as the XO clock for SDHCI controller is not correct,
it seems that I somehow made a mistake of passing it instead of the fixed
XO clock.

Fixes: 04b3b72b5b ("ARM: dts: qcom: ipq4019: Add SDHCI controller node")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811110150.229966-1-robert.marko@sartura.hr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-08-11 08:21:55 -07:00
Daniele Palmas
0724869ede bus: mhi: host: pci_generic: add support for Telit FE990 modem
Add support for Telit FE990 that has the same configuration as FN990:

$ lspci -vv
04:00.0 Unassigned class [ff00]: Qualcomm Device 0308
    Subsystem: Device 1c5d:2015

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20230804094039.365102-1-dnlplm@gmail.com
[mani: minor update to commit subject and adjusted comment]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-08-11 20:39:26 +05:30
Arnd Bergmann
b0f9f36079 bus: mhi: host: remove unused-but-set parameter
Clang warns about a parameter that is decremented but never evaluated here:

bus/mhi/host/main.c:803:13: error: parameter 'event_quota' set but not used [-Werror,-Wunused-but-set-parameter]
                             u32 event_quota)

Remove the access to the variable to avoid that warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20230811134547.3231160-1-arnd@kernel.org
[mani: minor spelling fix to commit message]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-08-11 20:37:23 +05:30
Ivan Orlov
1a22ec09a2
fpga: region: make fpga_region_class a static const structure
Now that the driver core allows for struct class to be in read-only
memory, move the fpga_region_class structure to be declared at build
time placing it into read-only memory, instead of having to be
dynamically allocated at boot time.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20230811073043.52808-3-ivan.orlov0322@gmail.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
2023-08-11 23:04:21 +08:00
Ivan Orlov
909960e2e2
fpga: fpga-mgr: make fpga_mgr_class a static const structure
Now that the driver core allows for struct class to be in read-only
memory, move the fpga_mgr_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20230811073043.52808-2-ivan.orlov0322@gmail.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
2023-08-11 23:04:03 +08:00
Ivan Orlov
7bb2d2190d
fpga: bridge: make fpga_bridge_class a static const structure
Now that the driver core allows for struct class to be in read-only
memory, move the fpga_bridge_class structure to be declared at build
time placing it into read-only memory, instead of having to be
dynamically allocated at boot time.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20230811073043.52808-1-ivan.orlov0322@gmail.com
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
2023-08-11 23:03:37 +08:00
Stefan Binding
7c76116639 ALSA: hda/cs8409: Support new Dell Dolphin Variants
Add 4 new Dell Dolphin Systems, same configuration as older systems.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230811123044.1045651-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-11 16:45:52 +02:00
Fabio Estevam
461b487e65 arm64: dts: imx8mm-beacon-baseboard: Remove usbotg2 pinctrl-names
There is no pinctrl description under usbotg2 node, so remove the unneeded
'pinctrl-names' property.

This fixes the following schema warning:

imx8mm-beacon-kit.dtb: usb@32e50000: 'pinctrl-0' is a dependency of 'pinctrl-names'

Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11 22:39:59 +08:00
Fabio Estevam
252810133d arm64: dts: imx8mm-emcon: Remove iomuxc pinctrl-names
Remove a 'pinctrl-names' that is not associated with a corresponding
'pinctrl-names'.

This fixes the following schema warning:

imx8mm-emcon-avari.dtb: pinctrl@30330000: 'pinctrl-0' is a dependency of 'pinctrl-names'

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11 22:39:15 +08:00
Athira Rajeev
e59fea47f8 perf symbols: Fix DSO kernel load and symbol process to correctly map DSO to its long_name, type and adjust_symbols
Test "object code reading" fails sometimes for kernel address as below:

    Reading object code for memory address: 0xc000000000004c3c
    File is: [kernel.kallsyms]
    On file address is: 0x14c3c
    dso__data_read_offset failed
    test child finished with -1
    ---- end ----
    Object code reading: FAILED!

Here dso__data_read_offset() fails for symbol address
0xc000000000004c3c. This is because the DSO long_name here is
"[kernel.kallsyms]" and hence open_dso() fails to open this file. There
is an incorrect DSO to map handling here. The key points here are:

- The DSO long_name is set to "[kernel.kallsyms]". This file is
  not present and hence returns error
- The DSO binary type is set to DSO_BINARY_TYPE__NOT_FOUND
- The DSO adjust_symbols member is set to zero

In the end dso__data_read_offset() returns -1 and the address 0x14c3c
can not be resolved. Hence the test fails. But the address actually maps
to the kernel DSO

    # objdump -z -d --start-address=0xc000000000004c3c --stop-address=0xc000000000004cbc /home/athira/linux/vmlinux

    /home/athira/linux/vmlinux:     file format elf64-powerpcle

    Disassembly of section .head.text:

    c000000000004c3c <exc_virt_0x4c00_system_call+0x3c>:
    c000000000004c3c:	a6 02 9b 7d 	mfsrr1  r12
    c000000000004c40:	78 13 42 7c 	mr      r2,r2
    c000000000004c44:	18 00 4d e9 	ld      r10,24(r13)
    c000000000004c48:	60 c6 4a 61 	ori     r10,r10,50784
    c000000000004c4c:	a6 03 49 7d 	mtctr   r10

Fix dso__process_kernel_symbol() to set the binary_type and
adjust_symbols members. dso->adjust_symbols is used by
map__rip_2objdump() which converts the symbol start address to the
objdump address. Also set dso->long_name in dso__load_vmlinux().

Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20230811051546.70039-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-08-11 11:27:50 -03:00
Fabio Estevam
e679132a31 ARM: dts: imx6dl-b1x5pv2: Fix simple-audio routing property
Per simple-card.yaml, 'simple-audio-card,audio-routing' is not a valid
property.

Change it to 'simple-audio-card,routing'.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11 22:27:30 +08:00
Fabio Estevam
bdbae4c1b4 arm64: dts: imx8m-beacon-kit: Remove extra sound-sai entry
'sound-dai' should contain only 'sai5'. Remove the extra entry to
fix the following schema warning:

imx8mm-beacon-kit.dtb: sound-hdmi: simple-audio-card,cpu:sound-dai: [[110], [0]] is too long
	from schema $id: http://devicetree.org/schemas/sound/simple-card.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11 22:25:23 +08:00
Shenwei Wang
5f6d1998ad gpio: mxc: release the parent IRQ in runtime suspend
Release the parent interrupt request during runtime suspend, allowing
the parent interrupt controller to enter runtime suspend if there are
no active users.

This change may not have a visible impact if the parent controller is
the GIC, but it can enable significant power savings for parent IRQ
controllers like IRQSteer inside a subsystem on i.MX8 SoCs. Releasing
the parent IRQ provides an opportunity for the subsystem to enter suspend
states if there are no active users.

Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-08-11 16:22:46 +02:00
Marco Felsch
8b7b603805 dt-bindings: arm: Add Polyhex DEBIX SOM A based boards
Add devicetree bindings for i.MX8MP based DEBIX SOM A and SOM A I/O
baseboard:
  - https://debix.io/hardware/debix-som-a.html
  - https://debix.io/hardware/debix-som-a-io-board.html

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11 22:21:49 +08:00
Krzysztof Kozlowski
b7df0f340b gpio: mxs: fix Wvoid-pointer-to-enum-cast warning
'devid' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:

  gpio-mxs.c:274:16: error: cast to smaller integer type 'enum mxs_gpio_id' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-08-11 16:21:46 +02:00
Marco Felsch
2305c4bf6a dt-bindings: arm: fsl: fix DEBIX binding
The current imx8mp-debix-model-a.dts uses all three compatibles. Fix the
corresponding bindings by adding an own entry for it. Adapt the comment
for the "polyhex,imx8mp-debix" binding to make it clear that this should
only be used for DEBIX Model A/B i.MX8MP SBCs.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11 22:21:39 +08:00
Marco Felsch
21baf0b47f arm64: dts: freescale: Add DEBIX SOM A and SOM A I/O Board support
Add support for the Debix SOM A + SOM A I/O board. The commit enables
only the basic features like:
 - 2x UART
 - 2x Network
 - eMMC/µSD
 - CAN
 - QSPI
 - USB Host / Device

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11 22:21:09 +08:00
Marco Felsch
574e4099d7 arm64: dts: imx8mp-debix: remove unused fec pinctrl node
The SoM A uses the EQOS ethernet interface and not the FEC, so drop the
interface pinctrl node from the device tree.

Fixes: c86d350aae ("arm64: dts: Add device tree for the Debix Model A Board")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11 22:20:56 +08:00
Rajeshwar R Shinde
a0e3b8e2ac gpio: imx-scu: Use ARRAY_SIZE for array length
Use of macro ARRAY_SIZE to calculate array size minimizes
the redundant code and improves code reusability.
This fixes warnings reported by Coccinelle:
drivers/gpio/gpio-imx-scu.c:106:32-33: WARNING: Use ARRAY_SIZE

Signed-off-by: Rajeshwar R Shinde <coolrrsh@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-08-11 16:20:02 +02:00
Fabio Estevam
9e7bb0af7b arm64: dts: imx8mp-debix-model-a: Remove invalid rtc property
Per haoyu,hym8563.yaml, 'clock-frequency' is not a valid property.

Remove it to fix the following schema warning:

imx8mp-debix-model-a.dtb: rtc@51: Unevaluated properties are not allowed ('clock-frequency' was unexpected)

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11 22:18:48 +08:00
Ranjani Vaidyanathan
c081197a33 firmware: imx: scu-irq: support identifying SCU wakeup source from sysfs
Record SCU wakeup interrupt in /sys/power/pm_wakeup_irq
The user can further identify the exact wakeup source by using the
following interface:
cat /sys/firmware/scu_wakeup_source/wakeup_src

The above will print the wake groups and the irqs that could have
contributed to waking up the kernel. For example if ON/OFF button was the
wakeup source:
cat /sys/firmware/scu_wakeup_source/wakeup_src
Wakeup source group = 3, irq = 0x1

The user can refer to the SCFW API documentation to identify all the
wake groups and irqs.

Signed-off-by: Ranjani Vaidyanathan <ranjani.vaidyanathan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11 22:14:10 +08:00
Peng Fan
6c59ce485f firmware: imx: scu-irq: enlarge the IMX_SC_IRQ_NUM_GROUP
Per SCFW update, update the IMX_SC_IRQ_NUM_GROUP to 9.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11 22:14:08 +08:00
Peng Fan
d2bd250cef firmware: imx: scu-irq: add imx_scu_irq_get_status
Extract the scu irq get status code from imx_scu_irq_work_handler and
make into a new function imx_scu_irq_get_status which could be used
by others, such as SECO.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11 22:14:05 +08:00
Robin Gong
19a72e0cb0 firmware: imx: scu-irq: fix RCU complaint after M4 partition reset
Use blocking_notifier_chain instead of atomic_notifier_chain, otherwise
there will be RCU complaint, because unregister/register_virtio_device()
will issue mbox message.

mbox_send_message() is blocking again after received M4 partition reset.

Actually, no need atomic notifier for scu irq notification since this
notifier is called in worker instead of interrupt handler.

[  389.706645] i2c-rpmsg virtio0.rpmsg-i2c-channel.-1.2: i2c rpmsg driver is removed
[  389.767362] Wait for remote ready timeout, use first_notify.
[  389.774084] ------------[ cut here ]------------
[  389.778729] WARNING: CPU: 0 PID: 397 at kernel/rcu/tree_plugin.h:293 rcu_note_context_switch+0x34/0x338
[  389.788131] Modules linked in:
[  389.791195] CPU: 0 PID: 397 Comm: kworker/0:13 Not tainted 5.4.0-rc5-02977-g08f78722f07b #26
[  389.799633] Hardware name: Freescale i.MX8DXL MEK (DT)
[  389.805481] Workqueue: events imx_scu_irq_work_handler

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11 22:14:02 +08:00
Peng Fan
8314aa8af4 firmware: imx: scu: use EOPNOTSUPP
Per checkpatch.pl, "ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP"
So use EOPNOTSUPP to replace ENOTSUPP.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11 22:14:00 +08:00
Peng Fan
150019dea2 firmware: imx: scu: use soc name for soc_id
Same as soc-imx8m and soc-imx driver, use soc name for soc_id which is
user friendly.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11 22:13:58 +08:00
Dong Aisheng
4b9ccf041e firmware: imx: scu: increase RPC timeout
When system loading is high, we can meet some command timeout
issue occasionally, so increase the timeout to a safe value.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11 22:13:55 +08:00
Dong Aisheng
22420dc71e firmware: imx: scu: change init level to subsys_initcall_sync
Change firmware init level to subsys_initcall_sync to ensure it's
probed before most devices to avoid unnecessary defer probe.

Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11 22:13:40 +08:00
Ming Lei
e24721e441 ublk: fix 'warn: variable dereferenced before check 'req'' from Smatch
The added check of 'req_op(req) == REQ_OP_ZONE_APPEND' should have been
done after the request is confirmed as valid.

Actually here, the request should always been true, so add one
WARN_ON_ONCE(!req), meantime move the zone_append check after
checking the request.

Cc: Andreas Hindborg <a.hindborg@samsung.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 29802d7ca3 ("ublk: enable zoned storage support")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230811135216.420404-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-11 08:13:23 -06:00
Ming Lei
a7a7dabb5d nvme: core: don't hold rcu read lock in nvme_ns_chr_uring_cmd_iopoll
Now nvme_ns_chr_uring_cmd_iopoll() has switched to request based io
polling, and the associated NS is guaranteed to be live in case of
io polling, so request is guaranteed to be valid because blk-mq uses
pre-allocated request pool.

Remove the rcu read lock in nvme_ns_chr_uring_cmd_iopoll(), which
isn't needed any more after switching to request based io polling.

Fix "BUG: sleeping function called from invalid context" because
set_page_dirty_lock() from blk_rq_unmap_user() may sleep.

Fixes: 585079b6e4 ("nvme: wire up async polling for io passthrough commands")
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Cc: Kanchan Joshi <joshi.k@samsung.com>
Cc: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Guangwu Zhang <guazhang@redhat.com>
Link: https://lore.kernel.org/r/20230809020440.174682-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-11 08:12:32 -06:00
Fabio Estevam
8b200238fb arm64: dts: imx8mp-msc-sm2s-ep1: Remove invalid sgtl5000 property
As per sgtl5000.yaml, 'clock-names' is not a valid property.

Remove it to fix the following schema warning:

imx8mp-msc-sm2s-ep1.dtb: audio-codec@a: Unevaluated properties are not allowed ('clock-names' was unexpected)

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11 22:09:07 +08:00
Fabio Estevam
e4f7fbf7e8 arm64: dts: imx8m-venice: Pass "brcm,bcm4329-fmac"
Pass "brcm,bcm4329-fmac" to fix the following schema warnings:

imx8mp-venice-gw74xx.dtb: wifi@0: compatible: 'oneOf' conditional failed, one must be fixed:
	['cypress,cyw4373-fmac'] is too short
	'cypress,cyw4373-fmac' is not one of ['brcm,bcm4329-fmac', 'pci14e4,43dc', 'pci14e4,4464', 'pci14e4,4488', 'pci14e4,4425', 'pci14e4,4433']
	from schema $id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml#

imx8mn-venice-gw7902.dtb: wifi@0: compatible: 'oneOf' conditional failed, one must be fixed:
	['brcm,bcm43455-fmac'] is too short
	'brcm,bcm43455-fmac' is not one of ['brcm,bcm4329-fmac', 'pci14e4,43dc', 'pci14e4,4464', 'pci14e4,4488', 'pci14e4,4425', 'pci14e4,4433']
	from schema $id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml#

Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11 22:07:53 +08:00
Fabio Estevam
961c3def48 arm64: defconfig: Enable CONFIG_DRM_IMX_LCDIF
Enable CONFIG_DRM_IMX_LCDIF so that display output can be functional
by default on the imx8mp-evk board.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11 22:05:59 +08:00
Fabio Estevam
65344b9bed arm64: dts: imx8mp-evk: Add HDMI support
imx8mp-evk has a MIPI DSI port that can be used with a ADV7535 MIPI
DSI to HDMI bridge.

Add support for it.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-08-11 22:05:06 +08:00
Arnaldo Carvalho de Melo
878460e8d0 perf build: Remove -Wno-unused-but-set-variable from the flex flags when building with clang < 13.0.0
clang < 13.0.0 doesn't grok -Wno-unused-but-set-variable, so just remove
it to avoid:

  error: unknown warning option '-Wno-unused-but-set-variable'; did you mean '-Wno-unused-const-variable'? [-Werror,-Wunknown-warning-option]
  make[4]: *** [/git/perf-6.5.0-rc4/tools/build/Makefile.build:128: /tmp/build/perf/util/pmu-flex.o] Error 1
  make[4]: *** Waiting for unfinished jobs....

Fixes: ddc8e4c966 ("perf build: Disable fewer bison warnings")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZNUSWr52jUnVaaa%2F@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-08-11 10:27:21 -03:00
William Breathitt Gray
0988ffa096 gpio: ws16c48: Migrate to the regmap API
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.

The WinSystems WS16C48 provides the following registers:

    Offset 0x0-0x5: Port 0-5 I/O
    Offset 0x6: Int_Pending
    Offset 0x7: Page/Lock
    Offset 0x8-0xA (Page 1): Pol_0-Pol_2
    Offset 0x8-0xA (Page 2): Enab_0-Enab_2
    Offset 0x8-0xA (Page 3): Int_ID0-Int_ID2

Port 0-5 I/O provides access to 48 lines of digital I/O across six
registers, each bit position corresponding to the respective line.
Writing a 1 to a respective bit position causes that output pin to sink
current, while writing a 0 to the same bit position causes that output
pin to go to a high-impedance state and allows it to be used an input.
Reads on a port report the inverted state (0 = high, 1 = low) of an I/O
pin when used in input mode. Interrupts are supported on Port 0-2.

Int_Pending is a read-only register that reports the combined state of
the INT_ID0 through INT_ID2 registers; an interrupt pending is indicated
when any of the low three bits are set.

The Page/Lock register provides the following bits:

    Bit 0-5: Port 0-5 I/O Lock
    Bit 6-7: Page 0-3 Selection

For Bits 0-5, writing a 1 to a respective bit position locks the output
state of the corresponding I/O port. Writing the page number to Bits 6-7
selects that respective register page for use.

Pol_0-Pol_2 are accessible when Page 1 is selected. Writing a 1 to a
respective bit position selects the rising edge detection interrupts for
that input line, while writing a 0 to the same bit position selects the
falling edge detection interrupts.

Enab_0-Enab_2 are accessible when Page 2 is selected. Writing a 1 to a
respective bit position enables interrupts for that input line, while
writing a 0 to that same bit position clears and disables interrupts for
that input line.

Int_ID0-Int_ID2 are accessible when Page 3 is selected. A respective bit
when read as a 1 indicates that an edge of the polarity set in the
corresponding polarity register was detected for the corresponding input
line. Writing any value to this register clears all pending interrupts
for the register.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/f59de81e80f7198bcfa9a15615c459c38b5d0e08.1680708357.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-08-11 14:23:35 +02:00
William Breathitt Gray
1a200a3966 gpio: pcie-idio-24: Migrate to the regmap API
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.

For the PCIe-IDIO-24 series of devices, the following BARs are
available:

    BAR[0]: memory mapped PEX8311
    BAR[1]: I/O mapped PEX8311
    BAR[2]: I/O mapped card registers

There are 24 FET Output lines, 24 Isolated Input lines, and 8 TTL/CMOS
lines (which may be configured for either output or input). The GPIO
lines are exposed by the following card registers:

    Base +0x0-0x2 (Read/Write): FET Outputs
    Base +0xB (Read/Write): TTL/CMOS
    Base +0x4-0x6 (Read): Isolated Inputs
    Base +0x7 (Read): TTL/CMOS

In order for the device to support interrupts, the PLX PEX8311 internal
PCI wire interrupt and local interrupt input must first be enabled.

The following card registers for Change-Of-State may be used:

    Base +0x8-0xA (Read): COS Status Inputs
    Base +0x8-0xA (Write): COS Clear Inputs
    Base +0xB (Read): COS Status TTL/CMOS
    Base +0xB (Write): COS Clear TTL/CMOS
    Base +0xE (Read/Write): COS Enable

The COS Enable register is used to enable/disable interrupts and
configure the interrupt levels; each bit maps to a group of eight inputs
as described below:

    Bit 0: IRQ EN Rising Edge IN0-7
    Bit 1: IRQ EN Rising Edge IN8-15
    Bit 2: IRQ EN Rising Edge IN16-23
    Bit 3: IRQ EN Rising Edge TTL0-7
    Bit 4: IRQ EN Falling Edge IN0-7
    Bit 5: IRQ EN Falling Edge IN8-15
    Bit 6: IRQ EN Falling Edge IN16-23
    Bit 7: IRQ EN Falling Edge TTL0-7

An interrupt is asserted when a change-of-state matching the interrupt
level configuration respective for a particular group of eight inputs
with enabled COS is detected.

The COS Status registers may be read to determine which inputs have
changed; if interrupts were enabled, an IRQ will be generated for the
set bits in these registers. Writing the value read from the COS Status
register back to the respective COS Clear register will clear just those
interrupts.

Reviewed-by: Michael Walle <michael@walle.cc>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/3091e387b1d2eac011a1d84e493663aa2acf982e.1680708357.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-08-11 14:23:33 +02:00
William Breathitt Gray
98aaff7c4e gpio: idio-16: Remove unused legacy interface
All idio-16 library consumers have migrated to the new interface
leveraging the gpio-regmap API. Legacy interface functions and code are
removed as no longer needed.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/651cff1cc3eb57b455a8048121cf6a4d4367f018.1680618405.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-08-11 14:23:32 +02:00
William Breathitt Gray
73d8f3efc5 gpio: pci-idio-16: Migrate to the regmap API
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver. Migrate the pci-idio-16 module to the new
idio-16 library interface leveraging the gpio-regmap API.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/5ba5405c64aca984d5cf3bdbdffa04c325e5a147.1680618405.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-08-11 14:23:31 +02:00
William Breathitt Gray
2c210c9a34 gpio: 104-idio-16: Migrate to the regmap API
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver. Migrate the 104-idio-16 module to the new
idio-16 library interface leveraging the gpio-regmap API.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/1f24a1f18c9a9daa4983713e0a5b53e838d624a8.1680618405.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-08-11 14:23:29 +02:00
William Breathitt Gray
db02247827 gpio: idio-16: Migrate to the regmap API
The regmap API supports IO port accessors so we can take advantage of
regmap abstractions rather than handling access to the device registers
directly in the driver.

By leveraging the regmap API, the idio-16 library is reduced to simply a
devm_idio_16_regmap_register() function and a configuration structure
struct idio_16_regmap_config.

Legacy functions and code will be removed once all consumers have
migrated to the new idio-16 library interface.

For IDIO-16 devices we have the following IRQ registers:

    Base Address +1 (Write): Clear Interrupt
    Base Address +2 (Read): Enable Interrupt
    Base Address +2 (Write): Disable Interrupt

An interrupt is asserted whenever a change-of-state is detected on any
of the inputs. Any write to 0x2 will disable interrupts, while any read
will enable interrupts. Interrupts are cleared by a write to 0x1.

For 104-IDIO-16 devices, there is no IRQ status register, so software
has to assume that if an interrupt is raised then it was for the
104-IDIO-16 device.

For PCI-IDIO-16 devices, there is an additional IRQ register:

    Base Address +6 (Read): Interrupt Status

Interrupt status can be read from 0x6 where bit 2 set indicates that an
IRQ has been generated.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/b45081958ab53dfa697f4a8b15f1bfba46718068.1680618405.git.william.gray@linaro.org/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-08-11 14:23:27 +02:00
Bartosz Golaszewski
39df52ddd9 gpio: sim: use sysfs_streq() and avoid an strdup()
When comparing strings passed to us from configfs, we can pass the page
argument directly to sysfs_streq() and avoid manual string trimming.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2023-08-11 13:58:06 +02:00