This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Link: https://lore.kernel.org/r/20230807105630.11638-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Link: https://lore.kernel.org/r/20230807105400.11560-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Link: https://lore.kernel.org/r/20230807104549.11225-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Link: https://lore.kernel.org/r/20230803104225.29740-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Link: https://lore.kernel.org/r/20230803104142.29694-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This function call was found to be unnecessary as there is no equivalent
platform_get_drvdata() call to access the private data of the driver. Also,
the private data is defined in this driver, so there is no risk of it being
accessed outside of this driver file.
Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
Link: https://lore.kernel.org/r/20230803104102.29647-1-aboutphysycs@gmail.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
According to the dt-bindings, the default value of reg-io-width is 4.
However, the value becomes zero when reg-io-width isn't specified.
Should set the actual value to dws->reg_io_width, considering it
referenced.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20230807001621.196776-1-hayashi.kunihiko@socionext.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The RT5682, RT1015 and RT1015p codecs used in this driver do not seem
capable of distinguishing Line Out connections from Headphone, but
the driver configures its jack object as if it can. Remove the wrong
value from the jack creation call to avoid any confusion.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Link: https://lore.kernel.org/r/20230805162216.441410-1-alpernebiyasak@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With IPC3, we reset hw_params during the stop trigger, so we should also
clean up the link DMA during the stop trigger.
Fixes: 1bf83fa665 ("ASoC: SOF: Intel: hda-dai: Do not perform DMA cleanup during stop")
Closes: https://github.com/thesofproject/linux/issues/4455
Closes: https://github.com/thesofproject/linux/issues/4482
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217673
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230808110627.32375-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
`strncpy` is deprecated for use on NUL-terminated destination strings [1].
A suitable replacement is `strscpy` [2] due to the fact that it
guarantees NUL-termination on its destination buffer argument which is
_not_ the case for `strncpy`!
It should be noted that the current implementation is unlikely to have a
bug because `drv_name` is a string literal with a size of 9 while
`card->driver` has a size of 16. However, it is probably worthwhile to
switch to a more robust and less ambiguous interface.
[1]: www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings
[2]: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20230807-sound-pci-hda-v1-1-6d9cdcd085ca@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Remove redundant definitions of DEVNAME and CARD_NAME, as they're not
useful. The former is not used anywhere, and the latter is used only
in module parameters descriptions.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230804110740.9867-2-ivan.orlov0322@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Trigger callback is not the best place for buffer iterator
initialization, so move it out to the prepare callback, where it
have to be.
Minor enhancement: remove blank line.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230804110740.9867-1-ivan.orlov0322@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Document the sysfs attributes description provided by HCCS driver on
Kunpeng SoC.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This patch creates chip, die and port directory based on the actual
hardware implementation of platform. Some sysfs entries under these
directories are created to query the health status and port information
of HCCS.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The Huawei Cache Coherence System (HCCS) is a multi-chip interconnection
bus protocol. This driver is aimed to support some features about HCCS on
Kunpeng SoC, like, querying the health status of HCCS.
This patch adds the probing of HCCS driver, and obtains all HCCS port
information by the dimension of chip and die on platform.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset first fixes a number of errors made in the hda-mlink
support, then adds Lunar Lake definitions. The main contribution is
the hda-dai changes where the HDaudio DMA is now used for SSP, DMIC
and SoundWire. In previous hardware the GPDMA (aka DesignWare) was
used and controlled by the audio firmware. The volume of code is
minimized with the abstraction added in previous kernel cycles.
Due to cross-dependencies between ASoC and SoundWire trees, the full
support for jack detection will be deferred to the next kernel
cycle. There's not much point to ask for a sync of the two trees to
support one patch for each tree - we are at -rc5 already.
Add WM8904 based analog sound card to Dahlia carrier board.
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230807202159.13095-5-francesco@dolcini.it
Signed-off-by: Nishanth Menon <nm@ti.com>
Add NAU8822 based analog sound card to Development carrier board.
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230807202159.13095-4-francesco@dolcini.it
Signed-off-by: Nishanth Menon <nm@ti.com>
On AM62-based SoCs the AUDIO_REFCLKx clocks can be used as an input to
external peripherals when configured through CTRL_MMR, so add the
clock nodes.
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20230807202159.13095-2-francesco@dolcini.it
Signed-off-by: Nishanth Menon <nm@ti.com>
Make two nonfunctional changes to the vector get/set vector reg
functions and their supporting function for simplification and
readability. The first is to not pass KVM_REG_RISCV_VECTOR, but
rather integrate it directly into the masking. The second is to
rename reg_val to reg_addr where and address is used instead of
a value.
Also opportunistically touch up some of the code formatting for
a third nonfunctional change.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The EBUSY errno is being used for KVM_SET_ONE_REG as a way to tell
userspace that a given reg can't be changed after the vcpu started.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
kvm_riscv_vcpu_(get/set)_reg_vector() now returns ENOENT if V is not
available, EINVAL if reg type is not of VECTOR type, and any error that
might be thrown by kvm_riscv_vcpu_vreg_addr().
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
riscv_vcpu_set_isa_ext_single() will prevent any write of isa_ext regs
if the vcpu already started spinning.
But if there's no extension state (enabled/disabled) made by the
userspace, there's no need to -EBUSY out - we can treat the operation as
a no-op.
zicbom/zicboz_block_size, ISA config reg and mvendorid/march/mimpid
already works in a more permissive manner w.r.t userspace writes being a
no-op, so let's do the same with isa_ext writes.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Right now we do not allow any write in mvendorid/marchid/mimpid if the
vcpu already started, preventing these regs to be changed.
However, if userspace doesn't change them, an alternative is to consider
the reg write a no-op and avoid erroring out altogether. Userpace can
then be oblivious about KVM internals if no changes were intended in the
first place.
Allow the same form of 'lazy writing' that registers such as
zicbom/zicboz_block_size supports: avoid erroring out if userspace makes
no changes in mvendorid/marchid/mimpid during reg write.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
kvm_riscv_vcpu_set_reg_config() will return -EBUSY if the ISA config reg
is being written after the VCPU ran at least once.
The same restriction isn't placed in kvm_riscv_vcpu_get_reg_config(), so
there's a chance that we'll -EBUSY out on an ISA config reg write even
if the userspace intended no changes to it.
We'll allow the same form of 'lazy writing' that registers such as
zicbom/zicboz_block_size supports: avoid erroring out if userspace made
no changes to the ISA config reg.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
vcpu_set_reg_config() and vcpu_set_reg_isa_ext() is throwing an
EOPNOTSUPP error when !vcpu->arch.ran_atleast_once. In similar cases
we're throwing an EBUSY error, like in mvendorid/marchid/mimpid
set_reg().
EOPNOTSUPP has a conotation of finality. EBUSY is more adequate in this
case since its a condition/error related to the vcpu lifecycle.
Change these EOPNOTSUPP instances to EBUSY.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The KVM_REG_RISCV_TIMER_REG can be read via get_one_reg(). But trying to
write anything in this reg via set_one_reg() results in an EOPNOTSUPP.
Change the API to behave like cbom_block_size: instead of always
erroring out with EOPNOTSUPP, allow userspace to write the same value
(riscv_timebase) back, throwing an EINVAL if a different value is
attempted.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
zicbom_block_size and zicboz_block_size have a peculiar API: they can be
read via get_one_reg() but any write will return a EOPNOTSUPP.
It makes sense to return a 'not supported' error since both values can't
be changed, but as far as userspace goes they're regs that are throwing
the same EOPNOTSUPP error even if they were read beforehand via
get_one_reg(), even if the same read value is being written back.
EOPNOTSUPP is also returned even if ZICBOM/ZICBOZ aren't enabled in the
host.
Change both to work more like their counterparts in get_one_reg() and
return -ENOENT if their respective extensions aren't available. After
that, check if the userspace is written a valid value (i.e. the host
value). Throw an -EINVAL if that's not case, let it slide otherwise.
This allows both regs to be read/written by userspace in a 'lazy'
manner, as long as the userspace doesn't change the reg vals.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Following a similar logic as the previous patch let's minimize the EINVAL
usage in *_one_reg() APIs by using ENOENT when an extension that
implements the reg is not available.
For consistency we're also replacing an EOPNOTSUPP instance that should
be an ENOENT since it's an "extension is not available" error.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
get_one_reg() and set_one_reg() are returning EINVAL errors for almost
everything: if a reg doesn't exist, if a reg ID is malformatted, if the
associated CPU extension that implements the reg isn't present in the
host, and for set_one_reg() if the value being written is invalid.
This isn't wrong according to the existing KVM API docs (EINVAL can be
used when there's no such register) but adding more ENOENT instances
will make easier for userspace to understand what went wrong.
Existing userspaces can be affected by this error code change. We
checked a few. As of current upstream code, crosvm doesn't check for any
particular errno code when using kvm_(get|set)_one_reg(). Neither does
QEMU. rust-vmm doesn't have kvm-riscv support yet. Thus we have a good
chance of changing these error codes now while the KVM RISC-V ecosystem
is still new, minimizing user impact.
Change all get_one_reg() and set_one_reg() implementations to return
-ENOENT at all "no such register" cases.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
KVM userspaces need to be aware of the host SATP to allow them to
advertise it back to the guest OS.
Since this information is used to build the guest FDT we can't wait for
the SATP reg to be readable. We just need to read the SATP mode, thus
we can use the existing 'satp_mode' global that represents the SATP reg
with MODE set and both ASID and PPN cleared. E.g. for a 32 bit host
running with sv32 satp_mode is 0x80000000, for a 64 bit host running
sv57 satp_mode is 0xa000000000000000, and so on.
Add a new userspace virtual config register 'satp_mode' to allow
userspace to read the current SATP mode the host is using with
GET_ONE_REG API before spinning the vcpu.
'satp_mode' can't be changed via KVM, so SET_ONE_REG is allowed as long
as userspace writes the existing 'satp_mode'.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Let us sort isa extensions alphabetically in kvm_isa_ext_arr[] and
kvm_riscv_vcpu_isa_disable_allowed() so that future insertions are
more predictable.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zicntr, Zicsr, Zifencei, and Zihpm
extensions for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
We extend the KVM ISA extension ONE_REG interface to allow KVM
user space to detect and enable Zba and Zbs extensions for Guest/VM.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, the ISA extension ONE_REG interface only allows enabling or
disabling one extension at a time. To improve this, we extend the ISA
extension ONE_REG interface (similar to SBI extension ONE_REG interface)
so that KVM user space can enable/disable multiple extensions in one
ioctl.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The VCPU ONE_REG interface has grown over time and it will continue
to grow with new ISA extensions and other features. Let us move all
ONE_REG related code to its own source file so that vcpu.c only
focuses only on high-level VCPU functions.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add clock ID definitions for Intel Agilex5 SoCFPGA.
The registers in Agilex5 handling the clock is named as clock manager.
Signed-off-by: Teh Wen Ping <wen.ping.teh@intel.com>
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Agilex5 is a new SoCFPGA in Intel Agilex SoCFPGA Family,
include compatible string for Agilex5 SoCFPGA board.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The i.MX integration for the DesignWare PCI controller has a _host_exit()
operation which undoes everything that the _host_init() operation does but
does not wire this up as the host_deinit callback for the core, or call it
in any path other than suspend. This means that if we ever unwind the
initial probe of the device, for example because it fails, the regulator
core complains that the regulators for the device were left enabled:
imx6q-pcie 33800000.pcie: iATU: unroll T, 4 ob, 4 ib, align 64K, limit 16G
imx6q-pcie 33800000.pcie: Phy link never came up
imx6q-pcie 33800000.pcie: Phy link never came up
imx6q-pcie: probe of 33800000.pcie failed with error -110
------------[ cut here ]------------
WARNING: CPU: 2 PID: 46 at drivers/regulator/core.c:2396 _regulator_put+0x110/0x128
Wire up the callback so that the core can clean up after itself.
Link: https://lore.kernel.org/r/20230731-pci-imx-regulator-cleanup-v2-1-fc8fa5c9893d@kernel.org
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Compared to all the other work we're already doing to deliver
an skb to userspace this is very cheap - at worse an extra
call to ktime_get_real() - and very useful.
(and indeed it may even be cheaper if we're running from other hooks)
(background: Android occasionally logs packets which
caused wake from sleep/suspend and we'd like to have
timestamps reliably associated with these events)
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
AP_VLAN interfaces are virtual, so doesn't really exist as a type for
capabilities. When passed in as a type, AP is the one that's really intended.
Fixes: c4cbaf7973 ("cfg80211: Add support for HE")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230622165919.46841-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Continuing to use pci_host_common_probe() for the PCIe Root Complex on
PolarFire SoC is leading to an extremely large _init() function and some
unnatural code flow. Re-partition the code so that some tasks are done
in a _probe() routine, which calls pci_host_common_probe() and then use
a much smaller _init() function, mainly to enable interrupts after
address translation tables are set up.
Link: https://lore.kernel.org/r/20230728131401.1615724-8-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
The PCIe Root Complex on PolarFire SoC is configured at bitstream creation
time using Libero. Key MSI-related parameters include the number of
MSIs (1/2/4/8/16/32) and the MSI address. In the device driver, extract
this information from hardware registers at init time, and use it to configure
MSI system, including configuring MSI capability structure correctly in
configuration space.
Link: https://lore.kernel.org/r/20230728131401.1615724-7-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>