Commit graph

1,215,304 commits

Author SHA1 Message Date
Daire McNamara
4f0b91247f PCI: microchip: Clean up initialisation of interrupts
Refactor interrupt handling in _init() function into
disable_interrupts(), init_interrupts(), clear_sec_errors() and clear
ded_errors() because current code is unwieldy and prone to bugs.

Disable interrupts as soon as possible and only enable interrupts after
address translation is setup to prevent spurious axi2pcie and pcie2axi
translation errors being reported.

Link: https://lore.kernel.org/r/20230728131401.1615724-6-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
2023-08-08 12:58:21 +02:00
Daire McNamara
d1d6a0c9e7 PCI: microchip: Enable event handlers to access bridge and control pointers
Minor re-organisation so that event handlers can access both a pointer
to the bridge area of the PCIe Root Port and the control area of the PCIe
Root Port.

Link: https://lore.kernel.org/r/20230728131401.1615724-5-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
2023-08-08 12:58:21 +02:00
Daire McNamara
4d6bf4c495 PCI: microchip: Align register, offset, and mask names with HW docs
Minor code re-organisation so that macros representing registers ascend in
numerical order and use the same names as their hardware documentation.
Removed registers not used by the driver.

Link: https://lore.kernel.org/r/20230728131401.1615724-4-daire.mcnamara@microchip.com
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
2023-08-08 12:58:21 +02:00
Daire McNamara
2e245bc8a2 PCI: microchip: Enable building driver as a module
Enable building driver as a module. The expected use case is the
driver is built as a module, is installed when needed, and cannot be
removed once installed since it is not possible to clean-up
the irq_chip data structures on removal, as described in:

https://lore.kernel.org/linux-pci/87y1wgbah8.wl-maz@kernel.org/

The driver has .suppress_bind_attrs set to true for the same
reasons (ie prevent unbinding, that would leave the kernel
with stale IRQ configuration that cannot be cleaned up).

Link: https://lore.kernel.org/linux-pci/87y1wgbah8.wl-maz@kernel.org/
Link: https://lore.kernel.org/r/20230728131401.1615724-3-daire.mcnamara@microchip.com
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
2023-08-08 12:55:55 +02:00
Ping-Ke Shih
b74bb07cda wifi: rtw89: fix 8852AE disconnection caused by RX full flags
RX full flags are raised if certain types of RX FIFO are full, and then
drop all following MPDU of AMPDU. In order to resume to receive MPDU
when RX FIFO becomes available, we clear the register bits by the
commit a0d99ebb3e ("wifi: rtw89: initialize DMA of CMAC"). But, 8852AE
needs more settings to support this. To quickly fix disconnection problem,
revert the behavior as before.

Fixes: a0d99ebb3e ("wifi: rtw89: initialize DMA of CMAC")
Reported-by: Damian B <bronecki.damian@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217710
Cc: <Stable@vger.kernel.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Damian B <bronecki.damian@gmail.com>
Link: https://lore.kernel.org/r/20230808005426.5327-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-08-08 12:52:07 +02:00
Larry Finger
017e9420c1 MAINTAINERS: Remove tree entry for rtl8180
This entry is not needed. Remove it.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20230804222438.16076-3-Larry.Finger@lwfinger.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-08-08 12:49:39 +02:00
Larry Finger
6a67fe45fe MAINTAINERS: Update entry for rtl8187
As Herton Ronaldo Krzesinski is no longer active, remove him as maintainer
for rtl8187.

The git tree entry is also removed.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20230804222438.16076-2-Larry.Finger@lwfinger.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-08-08 12:49:33 +02:00
Petr Tesarik
07d6983241 wifi: brcm80211: handle params_v1 allocation failure
Return -ENOMEM from brcmf_run_escan() if kzalloc() fails for v1 params.

Fixes: 398ce273d6 ("wifi: brcmfmac: cfg80211: Add support for scan params v2")
Signed-off-by: Petr Tesarik <petr.tesarik.ext@huawei.com>
Link: https://lore.kernel.org/r/20230802163430.1656-1-petrtesarik@huaweicloud.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-08-08 12:47:37 +02:00
Luca Coelho
757b90bbfa drm/i915/display: pre-initialize some values in probe_gmdid_display()
When intel_display_device_probe() (and, subsequently,
probe_gmdid_display()) returns, the caller expects ver, rel and step
to be initialized.  Since there's no way to check that there was a
failure and no_display was returned without some further refactoring,
pre-initiliaze all these values to zero to keep it simple and safe.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230601090338.80284-1-luciano.coelho@intel.com
2023-08-08 13:45:56 +03:00
Karol Herbst
d5712cd22b drm/nouveau/disp: Revert a NULL check inside nouveau_connector_get_modes
The original commit adding that check tried to protect the kenrel against
a potential invalid NULL pointer access.

However we call nouveau_connector_detect_depth once without a native_mode
set on purpose for non LVDS connectors and this broke DP support in a few
cases.

Cc: Olaf Skibbe <news@kravcenko.com>
Cc: Lyude Paul <lyude@redhat.com>
Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/238
Closes: https://gitlab.freedesktop.org/drm/nouveau/-/issues/245
Fixes: 20a2ce87fb ("drm/nouveau/dp: check for NULL nv_connector->native_mode")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230805101813.2603989-1-kherbst@redhat.com
2023-08-08 12:25:33 +02:00
Ivan Orlov
64917f4c35 RDMA: Make all 'class' structures const
Now that the driver core allows for struct class to be in read-only
memory, making all 'class' structures to be declared at build time
placing them into read-only memory, instead of having to be dynamically
allocated at load time.

Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: "Md. Haris Iqbal" <haris.iqbal@ionos.com>
Cc: Jack Wang <jinpu.wang@ionos.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Yishai Hadas <yishaih@nvidia.com>
Cc: Ivan Orlov <ivan.orlov0322@gmail.com>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/2023080427-commuting-crewless-cbee@gregkh
Signed-off-by: Leon Romanovsky <leon@kernel.org>
2023-08-08 13:25:15 +03:00
Daire McNamara
6d473a5a26 PCI: microchip: Correct the DED and SEC interrupt bit offsets
The SEC and DED interrupt bits are laid out the wrong way round so the SEC
interrupt handler attempts to mask, unmask, and clear the DED interrupt
and vice versa. Correct the bit offsets so that each interrupt handler
operates properly.

Link: https://lore.kernel.org/r/20230728131401.1615724-2-daire.mcnamara@microchip.com
Fixes: 6f15a9c9f9 ("PCI: microchip: Add Microchip PolarFire PCIe controller driver")
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
2023-08-08 11:22:57 +02:00
Yibin Ding
4b430d4ac9 mmc: block: Fix in_flight[issue_type] value error
For a completed request, after the mmc_blk_mq_complete_rq(mq, req)
function is executed, the bitmap_tags corresponding to the
request will be cleared, that is, the request will be regarded as
idle. If the request is acquired by a different type of process at
this time, the issue_type of the request may change. It further
caused the value of mq->in_flight[issue_type] to be abnormal,
and a large number of requests could not be sent.

p1:					      p2:
mmc_blk_mq_complete_rq
  blk_mq_free_request
					      blk_mq_get_request
					        blk_mq_rq_ctx_init
mmc_blk_mq_dec_in_flight
  mmc_issue_type(mq, req)

This strategy can ensure the consistency of issue_type
before and after executing mmc_blk_mq_complete_rq.

Fixes: 81196976ed ("mmc: block: Add blk-mq support")
Cc: stable@vger.kernel.org
Signed-off-by: Yibin Ding <yibin.ding@unisoc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230802023023.1318134-1-yunlong.xing@unisoc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-08-08 11:19:38 +02:00
Anna-Maria Behnsen
e0a99a839f Documentation: core-api/cpuhotplug: Fix state names
Dynamic allocated hotplug states in documentation and the comment above
cpuhp_state enum do not match the code. To not get confused by wrong
documentation, change to proper state names.

Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230515162038.62703-1-anna-maria@linutronix.de
2023-08-08 10:55:58 +02:00
Greg Kroah-Hartman
f90bebb36a Update peci-next for v6.6-rc1
* Add Intel Sapphire Rapids support.
 * Add Nuvoton controller driver.
 -----BEGIN PGP SIGNATURE-----
 
 iQJOBAABCAA4FiEEVeIYQcCloMPRsCC93RgStozwYHYFAmTRcpMaHGl3b25hLndp
 bmlhcnNrYUBpbnRlbC5jb20ACgkQ3RgStozwYHa/mg/7Bhm/+rOfN3F6yYIVZtAk
 kc+VskI4H20wmr76D5mx5lzOlhbXQZIN2J2G8dhOJVVVJa+9OzS5Gw5LsVeLZTaf
 PYZxmkn20hidIz6ULH+CmeN1+JcwSrnbOWzXO/BJbfp9QRbxX2qINB5yi8TgRB9T
 rJSxzxb98aFXAtZJ1jqJSDGN2LZDmr5M7weFN6k9jMT+x0xivqAny6lKeJdjaMye
 /IwMWKWzLObUFvgpWsIVAY/RZWIg+vy6JqREu1RdA7HAALco2f0HpE96tkXLv+g0
 QiAXzWErcmBsQiN04EX+g+J24tpwuyA8TuDZYg49duX9I8BmI0ydIO/9PRtM3H9J
 4wd5EI3vWmH/3gERSHg7QAj9EplJyexWv33gZo0DerglxikfpNryZPhPz+6GEUPr
 r16oFu+kY/kSaGTcZaQ9Jsvtv/dZWZm+8oDVHNNX5VWH0ZUC8JbPK7PgBovvzAYq
 KwbyvqVYhzVMBDk0oWP/cEcWhEwA8Q2/v63dE2+ExVcfimHPai0PBwF5sgUyir3p
 ud9fzjLZUWRumASlRzZNZa3EztP2wuWO/GAo0lJdGDvylX5y8Ms5upwr8RKKhCBi
 F3ceO0S5Ff4zqKjBvKrhBgzyyFkU6ARoEXhoSVAvr8yAOyxMd+HE+Ci08fx6GvKv
 VGL4cvD6E5dzbgoOanZk09o=
 =KO5M
 -----END PGP SIGNATURE-----

Merge tag 'peci-next-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iwi/linux into char-misc-next

Iwona writes:

Update peci-next for v6.6-rc1

* Add Intel Sapphire Rapids support.
* Add Nuvoton controller driver.

* tag 'peci-next-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/iwi/linux:
  arm64: dts: nuvoton: Add PECI controller node
  ARM: dts: nuvoton: Add PECI controller node
  peci: Add peci-npcm controller driver
  dt-bindings: Add bindings for peci-npcm
  hwmon: (peci/dimmtemp) Add Sapphire Rapids support
  hwmon: (peci/cputemp) Add Intel Sapphire Rapids support
  peci: cpu: Add Intel Sapphire Rapids support
2023-08-08 10:53:30 +02:00
Antoniu Miclaus
14b7447cec Documentation: ABI: testing: admv8818: add bypass
Add documentation for the use of the bypass filter mode.

Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20230731084928.8302-2-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-08-08 09:51:06 +01:00
Antoniu Miclaus
1ed8775496 drivers: iio: filter: admv8818: add bypass mode
Add filter bypass mode, which bypasses the low pass filter, high pass
filter and disables/unregister the clock rate notifier.

Currently a feature like bypassing the filter is not achievable
straightforward and not very deductive. The user has to look through the
code and call the set_lpf_3db_frequency and set_hpf_3db_frequency iio
attributes from the user interface using the corner cases (freq >
largest lpf supported by the part, respectively freq < smallest hpf
supported by the part). Moreover, in such case of bypassing the filter,
the input clock rate change might mess up things so we want to make sure
that it is disabled. Also, the feature will help emphasizing the filter
behavior, therefore adding it in the userspace will ease the
charcaterization of the filter's effects when active/disabled.

It was requested by users of the driver to ease the interaction with
different configuration modes of the device.

Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://lore.kernel.org/r/20230731084928.8302-1-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-08-08 09:51:06 +01:00
Matti Vaittinen
fdb48f9d1a iio: light: bd27008: Support BD27010 RGB
The ROHM BU27010 is an RGBC sensor with a flickering detection FIFO. The
RGBC+IR sensor functionality is largely similar to what the BU27008 has.
There are some notable things though:
  - gain setting is once again new and exotic. Now, there is 6bit gain
    setting where 4 of the bits are common to all channels and 2 bits
    can be configured separately for each channel. The BU27010 has
    similar "1X on other channels vs 2X on IR when selector is 0x0"
    gain design as BU27008 had. So, we use same gain setting policy for
    BU27010 as we did for BU27008 - driver sets same gain selector for all
    channels but shows the gains separately for all channels so users
    can (at least in theory) detect this 1X vs 2X madness...
  - BU27010 has suffled all the control register bitfields to new
    addresses and bit positions while still keeping the register naming
    same.
  - Some more power/reset control is added.
  - FIFO for "flickering detection" is added.

The control register suffling made this slightly nasty. Still, it is
easier for maintenance perspective to add the BU27010 support in BU27008
driver because - even though the bit positions/addresses were changed -
most of the driver structure can be re-used. Writing own driver for
BU27010 would mean plenty of duplicate code albeit a tad more clarity.

The flickering FIFO is not supported by the driver.

Add BU27010 RGBC+IR support to rohm-bu27008 driver.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/111cd217ccece1c1f16ab4287532dc4e1ddb8a3f.1690958450.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-08-08 09:51:06 +01:00
Matti Vaittinen
ccca97fb3c iio: light: bu27008: add chip info
The ROHM BU27010 RGB + flickering sensor is in many regards similar to
the BU27008. Prepare for adding support for BU27010 by allowing
chip-specific properties to be brought from the of_device_id data.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/d5994648033d5513993b8d72eb186ddda211b5ac.1690958450.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-08-08 09:50:51 +01:00
Matti Vaittinen
ce2a8c1600 dt-bindings: iio: ROHM BU27010 RGBC + flickering sensor
The ROHM BU27010 is a sensor with 6 photodiodes (red, green, blue, clear,
IR and flickering detection) with five configurable channels. Red, green
and flickering detection being always available and two out of the rest
three (blue, clear, IR) can be selected to be simultaneously measured.
Typical application is adjusting LCD/OLED backlight of TVs, mobile phones
and tablet PCs.

Add binding document for ROHM BU27010.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/717d30694ba6864b8c28772d7478bed93ea10138.1690958450.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-08-08 09:50:34 +01:00
Alan Stern
ff33299ec8 USB: core: Fix race by not overwriting udev->descriptor in hub_port_init()
Syzbot reported an out-of-bounds read in sysfs.c:read_descriptors():

BUG: KASAN: slab-out-of-bounds in read_descriptors+0x263/0x280 drivers/usb/core/sysfs.c:883
Read of size 8 at addr ffff88801e78b8c8 by task udevd/5011

CPU: 0 PID: 5011 Comm: udevd Not tainted 6.4.0-rc6-syzkaller-00195-g40f71e7cd3c6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
 print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:351
 print_report mm/kasan/report.c:462 [inline]
 kasan_report+0x11c/0x130 mm/kasan/report.c:572
 read_descriptors+0x263/0x280 drivers/usb/core/sysfs.c:883
...
Allocated by task 758:
...
 __do_kmalloc_node mm/slab_common.c:966 [inline]
 __kmalloc+0x5e/0x190 mm/slab_common.c:979
 kmalloc include/linux/slab.h:563 [inline]
 kzalloc include/linux/slab.h:680 [inline]
 usb_get_configuration+0x1f7/0x5170 drivers/usb/core/config.c:887
 usb_enumerate_device drivers/usb/core/hub.c:2407 [inline]
 usb_new_device+0x12b0/0x19d0 drivers/usb/core/hub.c:2545

As analyzed by Khazhy Kumykov, the cause of this bug is a race between
read_descriptors() and hub_port_init(): The first routine uses a field
in udev->descriptor, not expecting it to change, while the second
overwrites it.

Prior to commit 45bf39f8df ("USB: core: Don't hold device lock while
reading the "descriptors" sysfs file") this race couldn't occur,
because the routines were mutually exclusive thanks to the device
locking.  Removing that locking from read_descriptors() exposed it to
the race.

The best way to fix the bug is to keep hub_port_init() from changing
udev->descriptor once udev has been initialized and registered.
Drivers expect the descriptors stored in the kernel to be immutable;
we should not undermine this expectation.  In fact, this change should
have been made long ago.

So now hub_port_init() will take an additional argument, specifying a
buffer in which to store the device descriptor it reads.  (If udev has
not yet been initialized, the buffer pointer will be NULL and then
hub_port_init() will store the device descriptor in udev as before.)
This eliminates the data race responsible for the out-of-bounds read.

The changes to hub_port_init() appear more extensive than they really
are, because of indentation changes resulting from an attempt to avoid
writing to other parts of the usb_device structure after it has been
initialized.  Similar changes should be made to the code that reads
the BOS descriptor, but that can be handled in a separate patch later
on.  This patch is sufficient to fix the bug found by syzbot.

Reported-and-tested-by: syzbot+18996170f8096c6174d0@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/000000000000c0ffe505fe86c9ca@google.com/#r
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Khazhy Kumykov <khazhy@google.com>
Fixes: 45bf39f8df ("USB: core: Don't hold device lock while reading the "descriptors" sysfs file")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/b958b47a-9a46-4c22-a9f9-e42e42c31251@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-08 10:45:32 +02:00
Alan Stern
de28e469da USB: core: Change usb_get_device_descriptor() API
The usb_get_device_descriptor() routine reads the device descriptor
from the udev device and stores it directly in udev->descriptor.  This
interface is error prone, because the USB subsystem expects in-memory
copies of a device's descriptors to be immutable once the device has
been initialized.

The interface is changed so that the device descriptor is left in a
kmalloc-ed buffer, not copied into the usb_device structure.  A
pointer to the buffer is returned to the caller, who is then
responsible for kfree-ing it.  The corresponding changes needed in the
various callers are fairly small.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/d0111bb6-56c1-4f90-adf2-6cfe152f6561@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-08 10:45:32 +02:00
Alan Stern
85d07c5562 USB: core: Unite old scheme and new scheme descriptor reads
In preparation for reworking the usb_get_device_descriptor() routine,
it is desirable to unite the two different code paths responsible for
initially determining endpoint 0's maximum packet size in a newly
discovered USB device.  Making this determination presents a
chicken-and-egg sort of problem, in that the only way to learn the
maxpacket value is to get it from the device descriptor retrieved from
the device, but communicating with the device to retrieve a descriptor
requires us to know beforehand the ep0 maxpacket size.

In practice this problem is solved in two different ways, referred to
in hub.c as the "old scheme" and the "new scheme".  The old scheme
(which is the approach recommended by the USB-2 spec) involves asking
the device to send just the first eight bytes of its device
descriptor.  Such a transfer uses packets containing no more than
eight bytes each, and every USB device must have an ep0 maxpacket size
>= 8, so this should succeed.  Since the bMaxPacketSize0 field of the
device descriptor lies within the first eight bytes, this is all we
need.

The new scheme is an imitation of the technique used in an early
Windows USB implementation, giving it the happy advantage of working
with a wide variety of devices (some of them at the time would not
work with the old scheme, although that's probably less true now).  It
involves making an initial guess of the ep0 maxpacket size, asking the
device to send up to 64 bytes worth of its device descriptor (which is
only 18 bytes long), and then resetting the device to clear any error
condition that might have resulted from the guess being wrong.  The
initial guess is determined by the connection speed; it should be
correct in all cases other than full speed, for which the allowed
values are 8, 16, 32, and 64 (in this case the initial guess is 64).

The reason for this patch is that the old- and new-scheme parts of
hub_port_init() use different code paths, one involving
usb_get_device_descriptor() and one not, for their initial reads of
the device descriptor.  Since these reads have essentially the same
purpose and are made under essentially the same circumstances, this is
illogical.  It makes more sense to have both of them use a common
subroutine.

This subroutine does basically what the new scheme's code did, because
that approach is more general than the one used by the old scheme.  It
only needs to know how many bytes to transfer and whether or not it is
being called for the first iteration of a retry loop (in case of
certain time-out errors).  There are two main differences from the
former code:

	We initialize the bDescriptorType field of the transfer buffer
	to 0 before performing the transfer, to avoid possibly
	accessing an uninitialized value afterward.

	We read the device descriptor into a temporary buffer rather
	than storing it directly into udev->descriptor, which the old
	scheme implementation used to do.

Since the whole point of this first read of the device descriptor is
to determine the bMaxPacketSize0 value, that is what the new routine
returns (or an error code).  The value is stored in a local variable
rather than in udev->descriptor.  As a side effect, this necessitates
moving a section of code that checks the bcdUSB field for SuperSpeed
devices until after the full device descriptor has been retrieved.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/495cb5d4-f956-4f4a-a875-1e67e9489510@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-08 10:45:32 +02:00
Ruan Jinjie
af6248afd7 USB: usbip: Remove an unnecessary goto
When udc_dev = NULL, it is not necessary to goto out to return, just
return NULL directly. And the out goto label can be removed.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230805045631.1858638-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-08 10:36:51 +02:00
Yue Haibing
a647b414e0 USB: misc: Remove unused include file usb_u132.h
Since commit 8be174835f ("usb: ftdi-elan: Delete driver") this include file
is not used anymore, so can remove it.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230807141128.39092-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-08 10:36:46 +02:00
Yue Haibing
d4255ac3fd usb: musb: Remove unused function declarations
Commit 32fee1df51 ("usb: musb: remove unused davinci support")
removed these implementations but leave declaration.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230807140928.35932-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-08 10:36:43 +02:00
Saranya Gopal
df0383ffad usb: typec: ucsi: Add debugfs for ucsi commands
Add support for UCSI commands through the following debugfs:
  # /sys/kernel/debug/usb/ucsi/$UCSI_DEVICE/command
  # /sys/kernel/debug/usb/ucsi/$UCSI_DEVICE/response

Eg: To execute UCSI GetCapabilities:
  # echo 0x6 > /sys/kernel/debug/usb/ucsi/<ucsi device>/command
Then read the result,
  # cat /sys/kernel/debug/usb/ucsi/<ucsi device>/response
    0x02000320000000020000ff0400000445

UCSI command will be written into the command file and the
response for the command can be viewed under the response file.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Saranya Gopal <saranya.gopal@intel.com>
Co-developed-by: Rajaram Regupathy <rajaram.regupathy@intel.com>
Signed-off-by: Rajaram Regupathy <rajaram.regupathy@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230807105205.742819-1-saranya.gopal@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-08 10:36:18 +02:00
Dan Drown
3b563b901e usb: cdc-acm: add PPS support
This patch adds support for PPS to CDC devices. Changes to the DCD pin
are monitored and passed to the ldisc system, which is used by
pps-ldisc.

Signed-off-by: Dan Drown <dan-netdev@drown.org>
Link: https://lore.kernel.org/r/ZM8ExV6bAvJtIA1d@vps3.drown.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-08 10:36:05 +02:00
Greg Kroah-Hartman
f48585c468 thunderbolt: Fixes for v6.5-rc6
This includes two fixes for v6.5-rc6:
 
   - Correct display flickering when connecting a Thunderbolt 3 device to
     an AMD USB4 host controller
   - Fix a memory leak in bandwidth allocation request.
 
 Both have been in linux-next with no reported issues.
 -----BEGIN PGP SIGNATURE-----
 
 iQJUBAABCgA+FiEEVTdhRGBbNzLrSUBaAP2fSd+ZWKAFAmTR0HMgHG1pa2Eud2Vz
 dGVyYmVyZ0BsaW51eC5pbnRlbC5jb20ACgkQAP2fSd+ZWKC3og/+M/WLfU0Ns8Ak
 Sym2mchNDbXrP00dAh8CegKpaHqvVF7XqQgYbavMGM/X+9WwGSyo9yAKwxbzGI7+
 dbDswmcXbawdcSSsngNliwhoE+0Re7hf8pFBA4Ez70B8ObnnFPbCl8cSebZwqh7J
 PDsJNYkHcQMuCL0c3cvQdOBC3Ou0l8AQoJwsRN2Hrmyb8RIwgjaBFECMh7gXkxu2
 A6iz078IJTF8WnGPPO2WhqkKSrTZDSVAA6J1nS9m92U6C3NPsU0a8Bv7JPVETehL
 y/xoFewjNzv3S5oUHlLVB4nvXhg8QM7p2r+K0hNQ1S5AUblFeQOitAmpftvALhBP
 YKHYpNBqg/p8xa2Iy8m7/nmlFyP8Angv23YE1VTGIu4OM8bFY0a/n2NCqeguTDkp
 D3dMPEgCXZsd7k9G4riX/D5mUlGBK2h0jEuFh92DVaz3OppGWS2On5VAlsXdaY0h
 HtTKEfZOkaT8UN3WMW/5Tdk0PO+8lW2jopCfp/Tit4i1NQgx5JbmCmMBm8pxtrqH
 8+q3vhZK/UIcvXImq18tBAUS19DbEiYhhuA6uZFlmMAECH5R5czZJz7muGos8Cgr
 MMSm/Mm+x0F0qS0WirYYyWfv8WQBUwurdDZp/VAEJy86kpx3qreoHEytfzPeB1zk
 DlGf9xiCnUgRe021wNa/7wGGxRfM9CI=
 =T7f1
 -----END PGP SIGNATURE-----

Merge tag 'thunderbolt-for-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus

Mika writes:

thunderbolt: Fixes for v6.5-rc6

This includes two fixes for v6.5-rc6:

  - Correct display flickering when connecting a Thunderbolt 3 device to
    an AMD USB4 host controller
  - Fix a memory leak in bandwidth allocation request.

Both have been in linux-next with no reported issues.

* tag 'thunderbolt-for-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
  thunderbolt: Fix memory leak in tb_handle_dp_bandwidth_request()
  thunderbolt: Fix Thunderbolt 3 display flickering issue on 2nd hot plug onwards
2023-08-08 10:04:47 +02:00
Xin Li
39163d5479 x86/vdso: Choose the right GDT_ENTRY_CPUNODE for 32-bit getcpu() on 64-bit kernel
The vDSO getcpu() reads CPU ID from the GDT_ENTRY_CPUNODE entry when the RDPID
instruction is not available. And GDT_ENTRY_CPUNODE is defined as 28 on 32-bit
Linux kernel and 15 on 64-bit. But the 32-bit getcpu() on 64-bit Linux kernel
is compiled with 32-bit Linux kernel GDT_ENTRY_CPUNODE, i.e., 28, beyond the
64-bit Linux kernel GDT limit. Thus, it just fails _silently_.

When BUILD_VDSO32_64 is defined, choose the 64-bit Linux kernel GDT definitions
to compile the 32-bit getcpu().

Fixes: 877cff5296 ("x86/vdso: Fake 32bit VDSO build on 64bit compile for vgetcpu")
Reported-by: kernel test robot <yujie.liu@intel.com>
Reported-by: Shan Kang <shan.kang@intel.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230322061758.10639-1-xin3.li@intel.com
Link: https://lore.kernel.org/oe-lkp/202303020903.b01fd1de-yujie.liu@intel.com
2023-08-08 09:31:43 +02:00
Vasant Hegde
8e11876a11 iommu/amd: Rearrange DTE bit definations
Rearrage according to 64bit word they are in.

Note that I have not rearranged gcr3 related macros even though
they belong to different 64bit word as its easy to read it in
current format.

No functional changes intended.

Suggested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20230619131908.5887-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2023-08-08 08:30:19 +02:00
Duke Xin (辛安文)
7b672d703e bus: mhi: host: pci_generic: Add support for Quectel RM520N-GL Lenovo variant
Quectel's RM520N-GL Lenovo variant is same as that of the existing
RM520N-GL modem and uses the same config. But this one is designed for
Lenovo laptop usecase, hence Quectel got a new PID.

Signed-off-by: Duke Xin(辛安文) <duke_xinanwen@163.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/20230807030454.37255-1-duke_xinanwen@163.com
[mani: tweaked subject and commit message a bit]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-08-08 11:57:28 +05:30
Mika Westerberg
a3f6445842 Documentation/ABI: thunderbolt: Replace 01.org in contact
The mailing list on 01.org does not work anymore and the whole site
redirects to intel.com Open Source page so replace the 01.org address
with my email address.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-08-08 08:13:22 +03:00
Mika Westerberg
d589fd42cf thunderbolt: Check Intel vendor ID in tb_switch_get_generation()
Only Intel made Thunderbolt 1-3 devices so to avoid possible confusion
check for the Intel vendor ID before deciding the device generation.
While there move the USB4 check to happen first.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-08-08 08:13:17 +03:00
Mika Westerberg
408e1d965a thunderbolt: Log a warning if device links are not found
The software connection manager needs the device links in order to
establish the tunnels before the native protocols so log a warning if
they are not found.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2023-08-08 08:13:11 +03:00
Faith Ekstrand
e05f3938c5 drm/nouveau/sched: Don't pass user flags to drm_syncobj_find_fence()
The flags field in drm_syncobj_find_fence() takes SYNCOBJ_WAIT flags
from the syncobj UAPI whereas sync->flags is from the nouveau UAPI. What
we actually want is 0 flags which tells it to just try to find the
fence and then return without waiting.

Fixes: b88baab828 ("drm/nouveau: implement new VM_BIND uAPI")
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807234210.175968-1-faith.ekstrand@collabora.com
2023-08-08 04:53:49 +02:00
Danilo Krummrich
a3540b46e9 drm/nouveau: uvmm: remove dedicated VM pointer from VMAs
VMAs can find their corresponding VM through their embedded struct
drm_gpuva which already carries a pointer to a struct drm_gpuva_manager
which the VM is based on. Hence, remove the struct nouveau_uvmm pointer
from struct nouveau_uvma to save a couple of bytes per mapping.

Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807163238.2091-6-dakr@redhat.com
2023-08-08 04:47:19 +02:00
Danilo Krummrich
3cbc772107 drm/nouveau: uvmm: remove incorrect calls to mas_unlock()
Remove incorrect calls to mas_unlock() in the unwind path of
__nouveau_uvma_region_insert(). The region maple tree uses an external
lock instead, namely the global uvmm lock.

Fixes: b88baab828 ("drm/nouveau: implement new VM_BIND uAPI")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807163238.2091-5-dakr@redhat.com
2023-08-08 04:47:19 +02:00
Danilo Krummrich
e39701e33a drm/nouveau: remove incorrect __user annotations
Fix copy-paste error causing EXEC and VM_BIND syscalls data pointers
to carry incorrect __user annotations.

Fixes: b88baab828 ("drm/nouveau: implement new VM_BIND uAPI")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807163238.2091-4-dakr@redhat.com
2023-08-08 04:47:19 +02:00
Danilo Krummrich
85b7d20f46 drm/nouveau: nvkm: vmm: silence warning from cast
Cast the integer to a pointer-sized type first to keep the compiler
happy.

Fixes: 6b252cf422 ("drm/nouveau: nvkm/vmm: implement raw ops to manage uvmm")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807163238.2091-3-dakr@redhat.com
2023-08-08 04:47:14 +02:00
Danilo Krummrich
65c54fe0c8 nouveau/dmem: fix copy-paste error in nouveau_dmem_migrate_chunk()
Fix call to nouveau_fence_emit() with wrong channel parameter.

Fixes: 7f2a0b50b2 ("drm/nouveau: fence: separate fence alloc and emit")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807163238.2091-2-dakr@redhat.com
2023-08-08 04:45:00 +02:00
Jeuk Kim
a18e81d17a scsi: ufs: ufs-pci: Add support for QEMU
To ensure that the PCI based QEMU UFS device properly works with Linux,
register the device ID (0x0013) and vendor ID (0x1b36) of QEMU UFS device.

QEMU UFS will enable testing of the UFS driver inside a virtual machine on
systems without UFS host controller. It can also be used to preemptively
implement and test new features before the real device is created.

The new QEMU UFS device can be found at:

https://lore.kernel.org/qemu-devel/20230727155239.GA979354@fedora

Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Link: https://lore.kernel.org/r/20230807013726epcms2p1c604cb8e98680aebebb7cc5ab2d580f5@epcms2p1
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-07 22:39:00 -04:00
Jonas Gorski
2aa71b4b29 net: marvell: prestera: fix handling IPv4 routes with nhid
Fix handling IPv4 routes referencing a nexthop via its id by replacing
calls to fib_info_nh() with fib_info_nhc().

Trying to add an IPv4 route referencing a nextop via nhid:

    $ ip link set up swp5
    $ ip a a 10.0.0.1/24 dev swp5
    $ ip nexthop add dev swp5 id 20 via 10.0.0.2
    $ ip route add 10.0.1.0/24 nhid 20

triggers warnings when trying to handle the route:

[  528.805763] ------------[ cut here ]------------
[  528.810437] WARNING: CPU: 3 PID: 53 at include/net/nexthop.h:468 __prestera_fi_is_direct+0x2c/0x68 [prestera]
[  528.820434] Modules linked in: prestera_pci act_gact act_police sch_ingress cls_u32 cls_flower prestera arm64_delta_tn48m_dn_led(O) arm64_delta_tn48m_dn_cpld(O) [last unloaded: prestera_pci]
[  528.837485] CPU: 3 PID: 53 Comm: kworker/u8:3 Tainted: G           O       6.4.5 #1
[  528.845178] Hardware name: delta,tn48m-dn (DT)
[  528.849641] Workqueue: prestera_ordered __prestera_router_fib_event_work [prestera]
[  528.857352] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  528.864347] pc : __prestera_fi_is_direct+0x2c/0x68 [prestera]
[  528.870135] lr : prestera_k_arb_fib_evt+0xb20/0xd50 [prestera]
[  528.876007] sp : ffff80000b20bc90
[  528.879336] x29: ffff80000b20bc90 x28: 0000000000000000 x27: ffff0001374d3a48
[  528.886510] x26: ffff000105604000 x25: ffff000134af8a28 x24: ffff0001374d3800
[  528.893683] x23: ffff000101c89148 x22: ffff000101c89000 x21: ffff000101c89200
[  528.900855] x20: ffff00013641fda0 x19: ffff800009d01088 x18: 0000000000000059
[  528.908027] x17: 0000000000000277 x16: 0000000000000000 x15: 0000000000000000
[  528.915198] x14: 0000000000000003 x13: 00000000000fe400 x12: 0000000000000000
[  528.922371] x11: 0000000000000002 x10: 0000000000000aa0 x9 : ffff8000013d2020
[  528.929543] x8 : 0000000000000018 x7 : 000000007b1703f8 x6 : 000000001ca72f86
[  528.936715] x5 : 0000000033399ea7 x4 : 0000000000000000 x3 : ffff0001374d3acc
[  528.943886] x2 : 0000000000000000 x1 : ffff00010200de00 x0 : ffff000134ae3f80
[  528.951058] Call trace:
[  528.953516]  __prestera_fi_is_direct+0x2c/0x68 [prestera]
[  528.958952]  __prestera_router_fib_event_work+0x100/0x158 [prestera]
[  528.965348]  process_one_work+0x208/0x488
[  528.969387]  worker_thread+0x4c/0x430
[  528.973068]  kthread+0x120/0x138
[  528.976313]  ret_from_fork+0x10/0x20
[  528.979909] ---[ end trace 0000000000000000 ]---
[  528.984998] ------------[ cut here ]------------
[  528.989645] WARNING: CPU: 3 PID: 53 at include/net/nexthop.h:468 __prestera_fi_is_direct+0x2c/0x68 [prestera]
[  528.999628] Modules linked in: prestera_pci act_gact act_police sch_ingress cls_u32 cls_flower prestera arm64_delta_tn48m_dn_led(O) arm64_delta_tn48m_dn_cpld(O) [last unloaded: prestera_pci]
[  529.016676] CPU: 3 PID: 53 Comm: kworker/u8:3 Tainted: G        W  O       6.4.5 #1
[  529.024368] Hardware name: delta,tn48m-dn (DT)
[  529.028830] Workqueue: prestera_ordered __prestera_router_fib_event_work [prestera]
[  529.036539] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  529.043533] pc : __prestera_fi_is_direct+0x2c/0x68 [prestera]
[  529.049318] lr : __prestera_k_arb_fc_apply+0x280/0x2f8 [prestera]
[  529.055452] sp : ffff80000b20bc60
[  529.058781] x29: ffff80000b20bc60 x28: 0000000000000000 x27: ffff0001374d3a48
[  529.065953] x26: ffff000105604000 x25: ffff000134af8a28 x24: ffff0001374d3800
[  529.073126] x23: ffff000101c89148 x22: ffff000101c89148 x21: ffff00013641fda0
[  529.080299] x20: ffff000101c89000 x19: ffff000101c89020 x18: 0000000000000059
[  529.087471] x17: 0000000000000277 x16: 0000000000000000 x15: 0000000000000000
[  529.094642] x14: 0000000000000003 x13: 00000000000fe400 x12: 0000000000000000
[  529.101814] x11: 0000000000000002 x10: 0000000000000aa0 x9 : ffff8000013cee80
[  529.108985] x8 : 0000000000000018 x7 : 000000007b1703f8 x6 : 0000000000000018
[  529.116157] x5 : 00000000d3497eb6 x4 : ffff000105604081 x3 : 000000008e979557
[  529.123329] x2 : 0000000000000000 x1 : ffff00010200de00 x0 : ffff000134ae3f80
[  529.130501] Call trace:
[  529.132958]  __prestera_fi_is_direct+0x2c/0x68 [prestera]
[  529.138394]  prestera_k_arb_fib_evt+0x6b8/0xd50 [prestera]
[  529.143918]  __prestera_router_fib_event_work+0x100/0x158 [prestera]
[  529.150313]  process_one_work+0x208/0x488
[  529.154348]  worker_thread+0x4c/0x430
[  529.158030]  kthread+0x120/0x138
[  529.161274]  ret_from_fork+0x10/0x20
[  529.164867] ---[ end trace 0000000000000000 ]---

and results in a non offloaded route:

    $ ip route
    10.0.0.0/24 dev swp5 proto kernel scope link src 10.0.0.1 rt_trap
    10.0.1.0/24 nhid 20 via 10.0.0.2 dev swp5 rt_trap

When creating a route referencing a nexthop via its ID, the nexthop will
be stored in a separate nh pointer instead of the array of nexthops in
the fib_info struct. This causes issues since fib_info_nh() only handles
the nexthops array, but not the separate nh pointer, and will loudly
WARN about it.

In contrast fib_info_nhc() handles both, but returns a fib_nh_common
pointer instead of a fib_nh pointer. Luckily we only ever access fields
from the fib_nh_common parts, so we can just replace all instances of
fib_info_nh() with fib_info_nhc() and access the fields via their
fib_nh_common names.

This allows handling IPv4 routes with an external nexthop, and they now
get offloaded as expected:

    $ ip route
    10.0.0.0/24 dev swp5 proto kernel scope link src 10.0.0.1 rt_trap
    10.0.1.0/24 nhid 20 via 10.0.0.2 dev swp5 offload rt_offload

Fixes: 396b80cb5c ("net: marvell: prestera: Add neighbour cache accounting")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
Acked-by: Elad Nachman <enachman@marvell.com>
Link: https://lore.kernel.org/r/20230804101220.247515-1-jonas.gorski@bisdn.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 19:20:50 -07:00
Jakub Kicinski
b98a5aa7e4 Merge branch 'net-remove-redundant-initialization-owner'
Li Zetao says:

====================
net: Remove redundant initialization owner

This patch set removes redundant initialization owner when register a
fsl_mc_driver driver
====================

Link: https://lore.kernel.org/r/20230804095946.99956-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 19:18:30 -07:00
Li Zetao
ca46d207c9 net: dpaa2-switch: Remove redundant initialization owner in dpaa2_switch_drv
The fsl_mc_driver_register() will set "THIS_MODULE" to driver.owner when
register a fsl_mc_driver driver, so it is redundant initialization to set
driver.owner in dpaa2_switch_drv statement. Remove it for clean code.

Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230804095946.99956-3-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 19:18:23 -07:00
Li Zetao
43265d3fce net: dpaa2-eth: Remove redundant initialization owner in dpaa2_eth_driver
The fsl_mc_driver_register() will set "THIS_MODULE" to driver.owner when
register a fsl_mc_driver driver, so it is redundant initialization to set
driver.owner in dpaa2_eth_driver statement. Remove it for clean code.

Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230804095946.99956-2-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 19:18:22 -07:00
Jakub Kicinski
28e6a60f3a Merge branch 'octeontx2-af-tc-flower-offload-changes'
Suman Ghosh says:

====================
octeontx2-af: TC flower offload changes

This patchset includes minor code restructuring related to TC
flower offload for outer vlan and adding support for TC inner
vlan offload.

Patch #1 Code restructure to handle TC flower outer vlan offload

Patch #2 Add TC flower offload support for inner vlan
====================

Link: https://lore.kernel.org/r/20230804045935.3010554-1-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 19:16:01 -07:00
Suman Ghosh
21e748354e octeontx2-af: TC flower offload support for inner VLAN
Extend the current TC flower offload support to enable filters matching
inner VLAN, and support offload of those filters to hardware.

Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230804045935.3010554-3-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 19:15:59 -07:00
Suman Ghosh
aa07a0f421 octeontx2-af: Code restructure to handle TC outer VLAN offload
Moved the TC outer VLAN offload support to a separate function.
This change is done to handle all VLAN related changes cleanly from
a dedicated function.

Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230804045935.3010554-2-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 19:15:59 -07:00
Andrew Kanner
d14eea09ed net: core: remove unnecessary frame_sz check in bpf_xdp_adjust_tail()
Syzkaller reported the following issue:
=======================================
Too BIG xdp->frame_sz = 131072
WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121
  ____bpf_xdp_adjust_tail net/core/filter.c:4121 [inline]
WARNING: CPU: 0 PID: 5020 at net/core/filter.c:4121
  bpf_xdp_adjust_tail+0x466/0xa10 net/core/filter.c:4103
...
Call Trace:
 <TASK>
 bpf_prog_4add87e5301a4105+0x1a/0x1c
 __bpf_prog_run include/linux/filter.h:600 [inline]
 bpf_prog_run_xdp include/linux/filter.h:775 [inline]
 bpf_prog_run_generic_xdp+0x57e/0x11e0 net/core/dev.c:4721
 netif_receive_generic_xdp net/core/dev.c:4807 [inline]
 do_xdp_generic+0x35c/0x770 net/core/dev.c:4866
 tun_get_user+0x2340/0x3ca0 drivers/net/tun.c:1919
 tun_chr_write_iter+0xe8/0x210 drivers/net/tun.c:2043
 call_write_iter include/linux/fs.h:1871 [inline]
 new_sync_write fs/read_write.c:491 [inline]
 vfs_write+0x650/0xe40 fs/read_write.c:584
 ksys_write+0x12f/0x250 fs/read_write.c:637
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

xdp->frame_sz > PAGE_SIZE check was introduced in commit c8741e2bfe
("xdp: Allow bpf_xdp_adjust_tail() to grow packet size"). But Jesper
Dangaard Brouer <jbrouer@redhat.com> noted that after introducing the
xdp_init_buff() which all XDP driver use - it's safe to remove this
check. The original intend was to catch cases where XDP drivers have
not been updated to use xdp.frame_sz, but that is not longer a concern
(since xdp_init_buff).

Running the initial syzkaller repro it was discovered that the
contiguous physical memory allocation is used for both xdp paths in
tun_get_user(), e.g. tun_build_skb() and tun_alloc_skb(). It was also
stated by Jesper Dangaard Brouer <jbrouer@redhat.com> that XDP can
work on higher order pages, as long as this is contiguous physical
memory (e.g. a page).

Reported-and-tested-by: syzbot+f817490f5bd20541b90a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000774b9205f1d8a80d@google.com/T/
Link: https://syzkaller.appspot.com/bug?extid=f817490f5bd20541b90a
Link: https://lore.kernel.org/all/20230725155403.796-1-andrew.kanner@gmail.com/T/
Fixes: 43b5169d83 ("net, xdp: Introduce xdp_init_buff utility routine")
Signed-off-by: Andrew Kanner <andrew.kanner@gmail.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20230803190316.2380231-1-andrew.kanner@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 19:14:41 -07:00