Commit graph

1,215,304 commits

Author SHA1 Message Date
Zhu Wang
e5bd91cd39 drm/tve200: remove redundant of_match_ptr
The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr here.

Even for drivers that do not depend on CONFIG_OF, it's almost always
better to leave out the of_match_ptr(), since the only thing it can
possibly do is to save a few bytes of .text if a driver can be used both
with and without it. Hence we remove of_match_ptr.

Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731124222.78643-1-wangzhu9@huawei.com
2023-08-07 22:58:01 +02:00
Alex Sierra
ab3400eb94 drm/amdkfd: avoid unmap dma address when svm_ranges are split
DMA address reference within svm_ranges should be unmapped only after
the memory has been released from the system. In case of range
splitting, the DMA address information should be copied to the
corresponding range after this has split. But leaving dma mapping
intact.

Signed-off-by: Alex Sierra <alex.sierra@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07 16:36:44 -04:00
Kenneth Feng
15f5b0a7ab drm/amd/pm: correct the pcie width for smu 13.0.0
correct the pcie width value in pp_dpm_pcie for smu 13.0.0

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07 16:36:36 -04:00
Mario Limonciello
41519dc455 drm/amd/display: Don't show stack trace for missing eDP
Some systems are only connected by HDMI or DP, so warning related to
missing eDP is unnecessary.  Downgrade to debug instead.

Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Fixes: 6d9b6dceaa ("drm/amd/display: only warn once in dce110_edp_wait_for_hpd_ready()")
Reported-by: Mastan.Katragadda@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07 16:36:01 -04:00
Taimur Hassan
ec4b70db47 drm/amd/display: Fix typo in enable and disable symclk_se
[Why & How]
Symclk should be based on link_enc_inst, and symclk_fe_sel should be based
on stream_enc_inst.

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07 16:35:55 -04:00
Taimur Hassan
927e784c18 drm/amd/display: Add symclk enable/disable during stream enable/disable
[Why & How]
Using dig_stream_mapper, program symclk_en and symclk_fe_src_sel when
enabling or disabling the corresponding stream.

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07 16:35:45 -04:00
Prike Liang
4c340d0034 drm/amdgpu/discovery: add ih 6.1.0 support
Add to IP discovery table.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07 16:35:42 -04:00
Ben Li
0ba96fd3c0 drm/amdgpu: add ih 6.1 support
Add initial support for IH 6.1.

v2: Fix copyright date (Alex)

Signed-off-by: Ben Li <ben.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07 16:35:38 -04:00
Ben Li
85c391abd2 drm/amdgpu: add ih 6.1 registers
Add new registers.

v2: updates (Alex)

Signed-off-by: Ben Li <ben.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07 16:35:31 -04:00
Prike Liang
eff7a442c1 drm/amdgpu/discovery: add smuio 14.0.0 support
Add to IP discovery table.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07 16:35:27 -04:00
Prike Liang
9b9a5e34d4 drm/amdgpu/discovery: add hdp 6.1.0 support
Add to IP discovery table.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07 16:35:23 -04:00
Lijo Lazar
161c908d6a drm/amdgpu: Match against exact bootloader status
On PSP v13.x ASICs, boot loader will set only the MSB to 1 and clear the
least significant bits for any command submission. Hence match against
the exact register value, otherwise a register value of all 0xFFs also
could falsely indicate that boot loader is ready. Also, from PSP v13.0.6
and newer, bits[7:0] will be used to indicate command error status.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07 16:34:55 -04:00
Tim Huang
d68a1145dc drm/amd/pm: skip the RLC stop when S0i3 suspend for SMU v13.0.4/11
For SMU v13.0.4/11, driver does not need to stop RLC for S0i3,
the firmwares will handle that properly.

Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07 16:34:09 -04:00
Prike Liang
99af9c950d drm/amdgpu/discovery: enable sdma6 for SDMA 6.1.0
Add to IP discovery table.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07 16:34:04 -04:00
Mario Limonciello
70e64c4d52 drm/amd: Disable S/G for APUs when 64GB or more host memory
Users report a white flickering screen on multiple systems that
is tied to having 64GB or more memory.  When S/G is enabled pages
will get pinned to both VRAM carve out and system RAM leading to
this.

Until it can be fixed properly, disable S/G when 64GB of memory or
more is detected.  This will force pages to be pinned into VRAM.
This should fix white screen flickers but if VRAM pressure is
encountered may lead to black screens.  It's a trade-off for now.

Fixes: 81d0bcf990 ("drm/amdgpu: make display pinning more flexible (v2)")
Cc: Hamza Mahfooz <Hamza.Mahfooz@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: <stable@vger.kernel.org> # 6.1.y: bf0207e172 ("drm/amdgpu: add S/G display parameter")
Cc: <stable@vger.kernel.org> # 6.4.y
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2735
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2354
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07 16:32:54 -04:00
Prike Liang
7a22c147f7 drm/amdgpu/sdma6: initialize sdma 6.1.0
Add firmware declaration.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-07 16:32:46 -04:00
Linus Torvalds
14f9643dc9 workqueue: Fixes for v6.5-rc5
Two commits:
 
 * The recently added cpu_intensive auto detection and warning mechanism was
   spuriously triggered on slow CPUs. While not causing serious issues, it's
   still a nuisance and can cause unintended concurrency management
   behaviors. Relax the threshold on machines with lower BogoMIPS. While
   BogoMIPS is not an accurate measure of performance by most measures, we
   don't have to be accurate and it has rough but strong enough correlation.
 
 * A correction in Kconfig help text.
 -----BEGIN PGP SIGNATURE-----
 
 iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZNFMTQ4cdGpAa2VybmVs
 Lm9yZwAKCRCxYfJx3gVYGb+4AQCniWx3rwWWmLgviPR0AfYWbcQ8/P/qGh++fmsR
 tEF3sQD/bLdeWcVa1pSzXjhGtRVGsTis6oOhk81A0zIZlx0v2Qg=
 =sThu
 -----END PGP SIGNATURE-----

Merge tag 'wq-for-6.5-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq

Pull workqueue fixes from Tejun Heo:

 - The recently added cpu_intensive auto detection and warning mechanism
   was spuriously triggered on slow CPUs.

   While not causing serious issues, it's still a nuisance and can cause
   unintended concurrency management behaviors.

   Relax the threshold on machines with lower BogoMIPS. While BogoMIPS
   is not an accurate measure of performance by most measures, we don't
   have to be accurate and it has rough but strong enough correlation.

 - A correction in Kconfig help text

* tag 'wq-for-6.5-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Scale up wq_cpu_intensive_thresh_us if BogoMIPS is below 4000
  workqueue: Fix cpu_intensive_thresh_us name in help text
2023-08-07 13:07:12 -07:00
Jakub Kicinski
6624433751 Merge branch 'page_pool-a-couple-of-assorted-optimizations'
Alexander Lobakin says:

====================
page_pool: a couple of assorted optimizations

That initially was a spin-off of the IAVF PP series[0], but has grown
(and shrunk) since then a bunch. In fact, it consists of three
semi-independent blocks:

* #1-2: Compile-time optimization. Split page_pool.h into 2 headers to
  not overbloat the consumers not needing complex inline helpers and
  then stop including it in skbuff.h at all. The first patch is also
  prereq for the whole series.
* #3: Improve cacheline locality for users of the Page Pool frag API.
* #4-6: Use direct cache recycling more aggressively, when it is safe
  obviously. In addition, make sure nobody wants to use Page Pool API
  with disabled interrupts.

Patches #1 and #5 are authored by Yunsheng and Jakub respectively, with
small modifications from my side as per ML discussions.
For the perf numbers for #3-6, please see individual commit messages.

Also available on my GH with many more Page Pool goodies[1].

[0] https://lore.kernel.org/netdev/20230530150035.1943669-1-aleksander.lobakin@intel.com
[1] https://github.com/alobakin/linux/commits/iavf-pp-frag
====================

Link: https://lore.kernel.org/r/20230804180529.2483231-1-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 13:05:53 -07:00
Alexander Lobakin
4a36d0180c net: skbuff: always try to recycle PP pages directly when in softirq
Commit 8c48eea3ad ("page_pool: allow caching from safely localized
NAPI") allowed direct recycling of skb pages to their PP for some cases,
but unfortunately missed a couple of other majors.
For example, %XDP_DROP in skb mode. The netstack just calls kfree_skb(),
which unconditionally passes `false` as @napi_safe. Thus, all pages go
through ptr_ring and locks, although most of time we're actually inside
the NAPI polling this PP is linked with, so that it would be perfectly
safe to recycle pages directly.
Let's address such. If @napi_safe is true, we're fine, don't change
anything for this path. But if it's false, check whether we are in the
softirq context. It will most likely be so and then if ->list_owner
is our current CPU, we're good to use direct recycling, even though
@napi_safe is false -- concurrent access is excluded. in_softirq()
protection is needed mostly due to we can hit this place in the
process context (not the hardirq though).
For the mentioned xdp-drop-skb-mode case, the improvement I got is
3-4% in Mpps. As for page_pool stats, recycle_ring is now 0 and
alloc_slow counter doesn't change most of time, which means the
MM layer is not even called to allocate any new pages.

Suggested-by: Jakub Kicinski <kuba@kernel.org> # in_softirq()
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230804180529.2483231-7-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 13:05:53 -07:00
Jakub Kicinski
ff4e538c8c page_pool: add a lockdep check for recycling in hardirq
Page pool use in hardirq is prohibited, add debug checks
to catch misuses. IIRC we previously discussed using
DEBUG_NET_WARN_ON_ONCE() for this, but there were concerns
that people will have DEBUG_NET enabled in perf testing.
I don't think anyone enables lockdep in perf testing,
so use lockdep to avoid pushback and arguing :)

Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230804180529.2483231-6-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 13:05:53 -07:00
Alexander Lobakin
5b899c33b3 net: skbuff: avoid accessing page_pool if !napi_safe when returning page
Currently, pp->p.napi is always read, but the actual variable it gets
assigned to is read-only when @napi_safe is true. For the !napi_safe
cases, which yet is still a pack, it's an unneeded operation.
Moreover, it can lead to premature or even redundant page_pool
cacheline access. For example, when page_pool_is_last_frag() returns
false (with the recent frag improvements).
Thus, read it only when @napi_safe is true. This also allows moving
@napi inside the condition block itself. Constify it while we are
here, because why not.

Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230804180529.2483231-5-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 13:05:53 -07:00
Alexander Lobakin
06d0fbdad6 page_pool: place frag_* fields in one cacheline
On x86_64, frag_* fields of struct page_pool are scattered across two
cachelines despite the summary size of 24 bytes. All three fields are
used in pretty much the same places, but the last field, ::frag_users,
is pushed out to the next CL, provoking unwanted false-sharing on
hotpath (frags allocation code).
There are some holes and cold members to move around. Move frag_* one
block up, placing them right after &page_pool_params perfectly at the
beginning of CL2. This doesn't do any meaningful to the second block, as
those are some destroy-path cold structures, and doesn't do anything to
::alloc_stats, which still starts at 200-byte offset, 8 bytes after CL3
(still fitting into 1 cacheline).
On my setup, this yields 1-2% of Mpps when using PP frags actively.
When it comes to 32-bit architectures with 32-byte CL: &page_pool_params
plus ::pad is 44 bytes, the block taken care of is 16 bytes within one
CL, so there should be at least no regressions from the actual change.
::pages_state_hold_cnt is not related directly to that triple, but is
paired currently with ::frags_offset and decoupling them would mean
either two 4-byte holes or more invasive layout changes.

Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230804180529.2483231-4-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 13:05:53 -07:00
Alexander Lobakin
75eaf63ea7 net: skbuff: don't include <net/page_pool/types.h> to <linux/skbuff.h>
Currently, touching <net/page_pool/types.h> triggers a rebuild of more
than half of the kernel. That's because it's included in
<linux/skbuff.h>. And each new include to page_pool/types.h adds more
[useless] data for the toolchain to process per each source file from
that pile.

In commit 6a5bcd84e8 ("page_pool: Allow drivers to hint on SKB
recycling"), Matteo included it to be able to call a couple of functions
defined there. Then, in commit 57f05bc2ab ("page_pool: keep pp info as
long as page pool owns the page") one of the calls was removed, so only
one was left. It's the call to page_pool_return_skb_page() in
napi_frag_unref(). The function is external and doesn't have any
dependencies. Having very niche page_pool_types.h included only for that
looks like an overkill.

As %PP_SIGNATURE is not local to page_pool.c (was only in the
early submissions), nothing holds this function there. Teleport
page_pool_return_skb_page() to skbuff.c, just next to the main consumer,
skb_pp_recycle(), and rename it to napi_pp_put_page(), as it doesn't
work with skbs at all and the former name tells nothing. The #if guards
here are only to not compile and have it in the vmlinux when not needed
-- both call sites are already guarded.
Now, touching page_pool_types.h only triggers rebuilding of the drivers
using it and a couple of core networking files.

Suggested-by: Jakub Kicinski <kuba@kernel.org> # make skbuff.h less heavy
Suggested-by: Alexander Duyck <alexanderduyck@fb.com> # move to skbuff.c
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230804180529.2483231-3-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 13:05:53 -07:00
Yunsheng Lin
a9ca9f9cef page_pool: split types and declarations from page_pool.h
Split types and pure function declarations from page_pool.h
and add them in page_page/types.h, so that C sources can
include page_pool.h and headers should generally only include
page_pool/types.h as suggested by jakub.
Rename page_pool.h to page_pool/helpers.h to have both in
one place.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230804180529.2483231-2-aleksander.lobakin@intel.com
[Jakub: change microsoft/mana, fix kdoc paths in Documentation]
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 13:05:19 -07:00
Linus Torvalds
8043e2225a Hi,
contains a few more bug fixes.
 
 BR, Jarkko
 -----BEGIN PGP SIGNATURE-----
 
 iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCZNE5LRIcamFya2tvQGtl
 cm5lbC5vcmcACgkQGnq6IXRrq9JUvwD/TWeVqdhA8EUPD2kNEDdx6jbsoOb4zEY4
 JM0ek9Mw5s0A/R+aHpIXCX4e0HYataLT3ae6ioouJlUEfDLERsa+rEsF
 =iyQs
 -----END PGP SIGNATURE-----

Merge tag 'tpmdd-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull tpm fixes from Jarkko Sakkinen:
 "A few more bug fixes"

* tag 'tpmdd-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm/tpm_tis: Disable interrupts for Lenovo P620 devices
  tpm: Disable RNG for all AMD fTPMs
  sysctl: set variable key_sysctls storage-class-specifier to static
  tpm/tpm_tis: Disable interrupts for TUXEDO InfinityBook S 15/17 Gen7
2023-08-07 13:03:36 -07:00
Przemek Kitszel
b6143c9b07 ice: clean up __ice_aq_get_set_rss_lut()
Refactor __ice_aq_get_set_rss_lut() to improve reader experience and limit
misuse scenarios (undesired LUT size for given LUT type).

Allow only 3 RSS LUT type+size variants:
PF LUT sized 2048, GLOBAL LUT sized 512, and VSI LUT sized 64, which were
used on default flows prior to this commit.

Prior to the change, code was mixing the meaning of @params->lut_size and
@params->lut_type, flag assigning logic was cryptic, while long defines
made everything harder to follow.

Fix that by extracting some code out to separate helpers.
Drop some of "shift by 0" statements that originated from Intel's
internal HW documentation.

Drop some redundant VSI masks (since ice_is_vsi_valid() gives "valid" for
up to 0x300 VSIs).

After sweeping all the defines out of struct ice_aqc_get_set_rss_lut,
it fits into 7 lines.

Finally apply some cleanup to the callsite
(use of the new enums, tmp var for lengthy bit extraction).

Note that flags for 128 and 64 sized VSI LUT are the same,
and 64 is used everywhere in the code (updated to new enum here), it just
happened that there was 128 in flag name.

__ice_aq_get_set_rss_key() uses the same VSI valid bit, make constant
common for it and __ice_aq_get_set_rss_lut().

Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-07 13:01:29 -07:00
Jan Sokolowski
5708155d90 ice: add FW load wait
As some cards load FW from external sources, we have to wait
to be sure that FW is ready before setting link up.

Add check and wait for FW readiness

Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-07 13:01:29 -07:00
Karol Kolacinski
272ad7944a ice: Add get C827 PHY index function
Add a function to find the C827 PHY node handle and return C827 PHY
index for the E810 products.

In order to bring this function to full functionality, some
helpers for this were written by Michal Michalik.

Co-developed-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-07 13:01:29 -07:00
Marcin Szycik
41ad9f8ee6 ice: Rename enum ice_pkt_flags values
enum ice_pkt_flags contains values such as ICE_PKT_FLAGS_VLAN and
ICE_PKT_FLAGS_TUNNEL, but actually the flags words which they refer to
contain a range of unrelated values - e.g. word 0 (ICE_PKT_FLAGS_VLAN)
contains fields such as from_network and ucast, which have nothing to do
with VLAN. Rename each enum value to ICE_PKT_FLAGS_MDID<number>, so it's
clear in which flags word does some value reside.

Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-07 13:01:29 -07:00
Marcin Szycik
0960a27bd4 ice: Add direction metadata
Currently it is possible to create a filter which breaks TX traffic, e.g.:

tc filter add dev $PF1 ingress protocol ip prio 1 flower ip_proto udp
dst_port $PORT action mirred egress redirect dev $VF1_PR

This adds a rule which might match both TX and RX traffic, and in TX path
the PF will actually receive the traffic, which breaks communication.

To fix this, add a match on direction metadata flag when adding a tc rule.

Because of the way metadata is currently handled, a duplicate lookup word
would appear if VLAN metadata is also added. The lookup would still work
correctly, but one word would be wasted. To prevent it, lookup 0 now always
contains all metadata. When any metadata needs to be added, it is added to
lookup 0 and lookup count is not incremented. This way, two flags residing
in the same word will take up one word, instead of two.

Note: the drop action is also affected, i.e. it will now only work in one
direction.

Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-07 13:01:29 -07:00
Wojciech Drewek
505a1fdada ice: Accept LAG netdevs in bridge offloads
Allow LAG interfaces to be used in bridge offload using
netif_is_lag_master. In this case, search for ice netdev in
the list of LAG's lower devices.

Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-07 13:01:29 -07:00
Arnaldo Carvalho de Melo
aeb50d3f2c perf probe: Make synthesize_perf_probe_point() private to probe-event.c
Not used in any other place, so just make it static.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZM0pjfOe6R4X%2Fcql@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-08-07 16:40:29 -03:00
Arnaldo Carvalho de Melo
a612bbf8b8 perf probe: Free string returned by synthesize_perf_probe_point() on failure in synthesize_perf_probe_command()
Building perf with EXTRA_CFLAGS="-fsanitize=address" a leak was detected
elsewhere and lead to an audit, where we found that
synthesize_perf_probe_command() may leak synthesize_perf_probe_point()
return on failure, fix it.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZM0mzpQktHnhXJXr@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-08-07 16:40:29 -03:00
Arnaldo Carvalho de Melo
7bc0153c53 perf probe: Free string returned by synthesize_perf_probe_point() on failure to add a probe
Building perf with EXTRA_CFLAGS="-fsanitize=address" a leak is detect
when trying to add a probe to a non-existent function:

  # perf probe -x ~/bin/perf dso__neW
  Probe point 'dso__neW' not found.
    Error: Failed to add events.

  =================================================================
  ==296634==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 128 byte(s) in 1 object(s) allocated from:
      #0 0x7f67642ba097 in calloc (/lib64/libasan.so.8+0xba097)
      #1 0x7f67641a76f1 in allocate_cfi (/lib64/libdw.so.1+0x3f6f1)

  Direct leak of 65 byte(s) in 1 object(s) allocated from:
      #0 0x7f67642b95b5 in __interceptor_realloc.part.0 (/lib64/libasan.so.8+0xb95b5)
      #1 0x6cac75 in strbuf_grow util/strbuf.c:64
      #2 0x6ca934 in strbuf_init util/strbuf.c:25
      #3 0x9337d2 in synthesize_perf_probe_point util/probe-event.c:2018
      #4 0x92be51 in try_to_find_probe_trace_events util/probe-event.c:964
      #5 0x93d5c6 in convert_to_probe_trace_events util/probe-event.c:3512
      #6 0x93d6d5 in convert_perf_probe_events util/probe-event.c:3529
      #7 0x56f37f in perf_add_probe_events /var/home/acme/git/perf-tools-next/tools/perf/builtin-probe.c:354
      #8 0x572fbc in __cmd_probe /var/home/acme/git/perf-tools-next/tools/perf/builtin-probe.c:738
      #9 0x5730f2 in cmd_probe /var/home/acme/git/perf-tools-next/tools/perf/builtin-probe.c:766
      #10 0x635d81 in run_builtin /var/home/acme/git/perf-tools-next/tools/perf/perf.c:323
      #11 0x6362c1 in handle_internal_command /var/home/acme/git/perf-tools-next/tools/perf/perf.c:377
      #12 0x63667a in run_argv /var/home/acme/git/perf-tools-next/tools/perf/perf.c:421
      #13 0x636b8d in main /var/home/acme/git/perf-tools-next/tools/perf/perf.c:537
      #14 0x7f676302950f in __libc_start_call_main (/lib64/libc.so.6+0x2950f)

  SUMMARY: AddressSanitizer: 193 byte(s) leaked in 2 allocation(s).
  #

synthesize_perf_probe_point() returns a "detachec" strbuf, i.e. a
malloc'ed string that needs to be free'd.

An audit will be performed to find other such cases.

Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZM0l1Oxamr4SVjfY@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2023-08-07 16:40:13 -03:00
Jakub Kicinski
fa41884c1c Merge branch 'wireguard-fixes-for-6-5-rc6'
Jason A. Donenfeld says:

====================
wireguard fixes for 6.5-rc6

Just one patch this time, somewhat late in the cycle:

1) Fix an off-by-one calculation for the maximum node depth size in the
   allowedips trie data structure, and also adjust the self-tests to hit
   this case so it doesn't regress again in the future.
====================

Link: https://lore.kernel.org/r/20230807132146.2191597-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 12:26:58 -07:00
Jason A. Donenfeld
46622219aa wireguard: allowedips: expand maximum node depth
In the allowedips self-test, nodes are inserted into the tree, but it
generated an even amount of nodes, but for checking maximum node depth,
there is of course the root node, which makes the total number
necessarily odd. With two few nodes added, it never triggered the
maximum depth check like it should have. So, add 129 nodes instead of
128 nodes, and do so with a more straightforward scheme, starting with
all the bits set, and shifting over one each time. Then increase the
maximum depth to 129, and choose a better name for that variable to
make it clear that it represents depth as opposed to bits.

Cc: stable@vger.kernel.org
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20230807132146.2191597-2-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 12:26:57 -07:00
Jakub Kicinski
96bc313783 linux-can-next-for-6.6-20230807
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmTQn1YTHG1rbEBwZW5n
 dXRyb25peC5kZQAKCRC+UBxKKooE6Eh3CACQmSMV6FLXhFsOUzQS9ZyiKwQaAMG7
 1giCbXRJS6CiyHIbkye/h7AIC4WYcr9bTXxFTLypWBMqo9uFEm/jiFRPMyJcPsZa
 g8ySbQqkYeaGb0RkrHFbChsJaSnZhH1niatrAw+Vk2jeh/3Dait+LPFtdDWbLFsw
 6mPoZMv18tVy1r/0kiqPCive1Gie3eKzmVwBk9AK6XVUPS88bX7OKRppoRXv3f9x
 DpNKfJjhyWtBCoK8wsR3vVc1jRNL3eeLN7t8E7zYhfKRQsts1rVnyrWdihEjZ9ik
 e97oMG5Zeu8yStYiAkbGjNlhs1Uujlzc3yJoN0tuIFvniD2xC4bxeZ+X
 =X3r+
 -----END PGP SIGNATURE-----

Merge tag 'linux-can-next-for-6.6-20230807' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2023-08-07

The patch is from me and reverts the addition of the CAN controller
nodes in the allwinner d1 SoC.

* tag 'linux-can-next-for-6.6-20230807' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
  Revert "riscv: dts: allwinner: d1: Add CAN controller nodes"
====================

Link: https://lore.kernel.org/r/20230807074222.1576119-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 12:25:46 -07:00
Ruan Jinjie
200ee464f7
regulator: rpi-panel-attiny-regulator: Remove redundant of_match_ptr()
The driver depends on CONFIG_OF, so it is not necessary to use
of_match_ptr() here, and __maybe_unused can also be removed.

Even for drivers that do not depend on CONFIG_OF, it's almost always
better to leave out the of_match_ptr(), since the only thing it can
possibly do is to save a few bytes of .text if a driver can be used both
with and without it.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230807134127.2380390-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-07 20:20:12 +01:00
Ziyang Xuan
01f4fd2708 bonding: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves
BUG_ON(!vlan_info) is triggered in unregister_vlan_dev() with
following testcase:

  # ip netns add ns1
  # ip netns exec ns1 ip link add bond0 type bond mode 0
  # ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2
  # ip netns exec ns1 ip link set bond_slave_1 master bond0
  # ip netns exec ns1 ip link add link bond_slave_1 name vlan10 type vlan id 10 protocol 802.1ad
  # ip netns exec ns1 ip link add link bond0 name bond0_vlan10 type vlan id 10 protocol 802.1ad
  # ip netns exec ns1 ip link set bond_slave_1 nomaster
  # ip netns del ns1

The logical analysis of the problem is as follows:

1. create ETH_P_8021AD protocol vlan10 for bond_slave_1:
register_vlan_dev()
  vlan_vid_add()
    vlan_info_alloc()
    __vlan_vid_add() // add [ETH_P_8021AD, 10] vid to bond_slave_1

2. create ETH_P_8021AD protocol bond0_vlan10 for bond0:
register_vlan_dev()
  vlan_vid_add()
    __vlan_vid_add()
      vlan_add_rx_filter_info()
          if (!vlan_hw_filter_capable(dev, proto)) // condition established because bond0 without NETIF_F_HW_VLAN_STAG_FILTER
              return 0;

          if (netif_device_present(dev))
              return dev->netdev_ops->ndo_vlan_rx_add_vid(dev, proto, vid); // will be never called
              // The slaves of bond0 will not refer to the [ETH_P_8021AD, 10] vid.

3. detach bond_slave_1 from bond0:
__bond_release_one()
  vlan_vids_del_by_dev()
    list_for_each_entry(vid_info, &vlan_info->vid_list, list)
        vlan_vid_del(dev, vid_info->proto, vid_info->vid);
        // bond_slave_1 [ETH_P_8021AD, 10] vid will be deleted.
        // bond_slave_1->vlan_info will be assigned NULL.

4. delete vlan10 during delete ns1:
default_device_exit_batch()
  dev->rtnl_link_ops->dellink() // unregister_vlan_dev() for vlan10
    vlan_info = rtnl_dereference(real_dev->vlan_info); // real_dev of vlan10 is bond_slave_1
	BUG_ON(!vlan_info); // bond_slave_1->vlan_info is NULL now, bug is triggered!!!

Add S-VLAN tag related features support to bond driver. So the bond driver
will always propagate the VLAN info to its slaves.

Fixes: 8ad227ff89 ("net: vlan: add 802.1ad support")
Suggested-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230802114320.4156068-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 12:19:16 -07:00
Jakub Kicinski
0d0c5f0b9b Merge branch 'net-stmmac-correct-mac-propagation-delay'
Johannes Zink says:

====================
net: stmmac: correct MAC propagation delay

Changes in v3:
- work in Richard's review feedback. Thank you for reviewing my patch:
  - as some of the hardware may have no or invalid correction value
    registers: introduce feature switch which can be enabled in the glue
    code drivers depending on the actual hardware support
  - only enable the feature on the i.MX8MP for the time being, as the patch
    improves timing accuracy and is tested for this hardware
- Link to v2: https://lore.kernel.org/r/20230719-stmmac_correct_mac_delay-v2-1-3366f38ee9a6@pengutronix.de

Changes in v2:
- fix builds for 32bit, this was found by the kernel build bot
	Reported-by: kernel test robot <lkp@intel.com>
	Closes: https://lore.kernel.org/oe-kbuild-all/202307200225.B8rmKQPN-lkp@intel.com/
- while at it also fix an overflow by shifting a u32 constant from macro by 10bits
  by casting the constant to u64
- Link to v1: https://lore.kernel.org/r/20230719-stmmac_correct_mac_delay-v1-1-768aa4d09334@pengutronix.de

Tested-by: Kurt Kanzenbach <kurt@linutronix.de> # imx8mp
====================

Link: https://lore.kernel.org/r/20230719-stmmac_correct_mac_delay-v3-0-61e63427735e@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 12:17:15 -07:00
Johannes Zink
6cb2e613c7 net: stmmac: dwmac-imx: enable MAC propagation delay correction for i.MX8MP
As the i.MX8MP supports reading MAC propagation delay and correcting the
Hardware timestamp counter for additional delays [1], enable the feature
for this SoC.

This reduces phase error of the PPS output from the PTP Hardware Clock
from approx 150ns to 100ns.

[1] i.MX8MP Reference Manual, rev.1 Section 11.7.2.5.3 "Timestamp
correction"

Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Link: https://lore.kernel.org/r/20230719-stmmac_correct_mac_delay-v3-2-61e63427735e@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 12:17:13 -07:00
Johannes Zink
26cfb838aa net: stmmac: correct MAC propagation delay
The IEEE1588 Standard specifies that the timestamps of Packets must be
captured when the PTP message timestamp point (leading edge of first
octet after the start of frame delimiter) crosses the boundary between
the node and the network. As the MAC latches the timestamp at an
internal point, the captured timestamp must be corrected for the
additional data transmission latency, as described in the publicly
available datasheet [1].

This patch only corrects for the MAC-Internal delay, which can be read
out from the MAC_Ingress_Timestamp_Latency register on DWMAC version 5,
since the Phy framework currently does not support querying the Phy
ingress and egress latency. The Closs Domain Crossing Circuits errors as
indicated in [1] are already being accounted in the
stmmac_get_tx_hwtstamp() function and are not corrected here.

As the Latency varies for different link speeds and MII
modes of operation, the correction value needs to be updated on each
link state change.

As the delay also causes a phase shift in the timestamp counter compared
to the rest of the network, this correction will also reduce phase error
when generating PPS outputs from the timestamp counter.

Since the correction registers may be unavailable on some hardware and
no feature bits are documented for dynamically detection of the MAC
propagation delay readout, introduce a feature bit to explicitely enable
MAC delay Correction in the gluecode driver.

[1] i.MX8MP Reference Manual, rev.1 Section 11.7.2.5.3 "Timestamp
correction"

Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
Link: https://lore.kernel.org/r/20230719-stmmac_correct_mac_delay-v2-1-3366f38ee9a6@pengutronix.de
Link: https://lore.kernel.org/r/20230719-stmmac_correct_mac_delay-v3-1-61e63427735e@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-07 12:17:13 -07:00
Mark Brown
c82197491f
Add Richtek RTQ2208 SubPMIC support
Merge series from Alina Yu <alina_yu@richtek.com>:

This patch series adds support for RTQ2208 SubPMIC regulators.
The RTQ2208 is a multi-phase, programmable power management IC that
integrate with dual multi-configurable, synchronous buck converters
and two ldos. The bucks features wide output voltage range from 0.4V to 2.05V
and the capability to configure the corresponding power stages.
2023-08-07 20:16:22 +01:00
Ard Biesheuvel
a1b87d54f4 x86/efistub: Avoid legacy decompressor when doing EFI boot
The bare metal decompressor code was never really intended to run in a
hosted environment such as the EFI boot services, and does a few things
that are becoming problematic in the context of EFI boot now that the
logo requirements are getting tighter: EFI executables will no longer be
allowed to consist of a single executable section that is mapped with
read, write and execute permissions if they are intended for use in a
context where Secure Boot is enabled (and where Microsoft's set of
certificates is used, i.e., every x86 PC built to run Windows).

To avoid stepping on reserved memory before having inspected the E820
tables, and to ensure the correct placement when running a kernel build
that is non-relocatable, the bare metal decompressor moves its own
executable image to the end of the allocation that was reserved for it,
in order to perform the decompression in place. This means the region in
question requires both write and execute permissions, which either need
to be given upfront (which EFI will no longer permit), or need to be
applied on demand using the existing page fault handling framework.

However, the physical placement of the kernel is usually randomized
anyway, and even if it isn't, a dedicated decompression output buffer
can be allocated anywhere in memory using EFI APIs when still running in
the boot services, given that EFI support already implies a relocatable
kernel. This means that decompression in place is never necessary, nor
is moving the compressed image from one end to the other.

Since EFI already maps all of memory 1:1, it is also unnecessary to
create new page tables or handle page faults when decompressing the
kernel. That means there is also no need to replace the special
exception handlers for SEV. Generally, there is little need to do
any of the things that the decompressor does beyond

- initialize SEV encryption, if needed,
- perform the 4/5 level paging switch, if needed,
- decompress the kernel
- relocate the kernel

So do all of this from the EFI stub code, and avoid the bare metal
decompressor altogether.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-24-ardb@kernel.org
2023-08-07 21:07:43 +02:00
Ard Biesheuvel
31c77a5099 x86/efistub: Perform SNP feature test while running in the firmware
Before refactoring the EFI stub boot flow to avoid the legacy bare metal
decompressor, duplicate the SNP feature check in the EFI stub before
handing over to the kernel proper.

The SNP feature check can be performed while running under the EFI boot
services, which means it can force the boot to fail gracefully and
return an error to the bootloader if the loaded kernel does not
implement support for all the features that the hypervisor enabled.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-23-ardb@kernel.org
2023-08-07 21:03:53 +02:00
Ard Biesheuvel
bc5ddceff4 efi/libstub: Add limit argument to efi_random_alloc()
x86 will need to limit the kernel memory allocation to the lowest 512
MiB of memory, to match the behavior of the existing bare metal KASLR
physical randomization logic. So in preparation for that, add a limit
parameter to efi_random_alloc() and wire it up.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-22-ardb@kernel.org
2023-08-07 21:01:46 +02:00
Ard Biesheuvel
8338151935 x86/decompressor: Factor out kernel decompression and relocation
Factor out the decompressor sequence that invokes the decompressor,
parses the ELF and applies the relocations so that it can be called
directly from the EFI stub.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-21-ardb@kernel.org
2023-08-07 20:59:13 +02:00
Ard Biesheuvel
24388292e2 x86/decompressor: Move global symbol references to C code
It is no longer necessary to be cautious when referring to global
variables in the position independent decompressor code, now that it is
built using PIE codegen and makes an assertion in the linker script that
no GOT entries exist (which would require adjustment for the actual
runtime load address of the decompressor binary).

This means global variables can be referenced directly from C code,
instead of having to pass their runtime addresses into C routines from
asm code, which needs to happen at each call site. Do so for the code
that will be called directly from the EFI stub after a subsequent patch,
and avoid the need to duplicate this logic a third time.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-20-ardb@kernel.org
2023-08-07 20:58:02 +02:00
Yang Yingliang
93fd2be6eb
ASoC: SOF: ipc3-dtrace: Switch to memdup_user_nul() helper
Use memdup_user_nul() helper instead of open-coding to
simplify the code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230725120247.509422-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-07 19:56:07 +01:00
Hans de Goede
f957172bf7
ASoC: lower "no backend DAIs enabled for ... Port" log severity
If SNDRV_PCM_IOCTL_PREPARE is called when the mixer settings linking
frontend and backend have not been setup yet this results in
e.g. the following errors getting logged:

[   43.244549]  Baytrail Audio Port: ASoC: no backend DAIs enabled for Baytrail Audio Port
[   43.244744]  Baytrail Audio Port: ASoC: error at dpcm_fe_dai_prepare on Baytrail Audio Port: -22

pipewire triggers this leading to 96 lines getting logged
after the user has logged into a GNOME session.

Change the actual "no backend DAIs enabled for ... Port" error to
dev_err_once() to avoid it getting repeated 48 times. While at it
also improve the error by hinting the user how to fix this.

To not make developing new UCM profiles harder, also log the error
at dev_dbg() level all the time (vs once). So that e.g. dyndbg can
be used to (re)enable the messages.

Also changes _soc_pcm_ret() to not log for -EINVAL errors, to fix
the other error getting logged 48 times. Userspace passing wrong
parameters should not lead to dmesg messages.

Link: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/3407
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230805171435.31696-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-07 19:56:06 +01:00