The GMU force shutdown sequence involves some additional register cleanup
which was not implemented previously. Do so.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543340/
Signed-off-by: Rob Clark <robdclark@chromium.org>
While it's not very well understood, there is some sort of a fault
handler implemented in the GMU firmware which triggers when a certain
bit is set, resulting in the M3 core not booting up the way we expect
it to.
Write a magic value to a magic register to hopefully prevent that
from happening.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543335/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Some specific SKUs leave certain protection range registers empty.
Allow for that behavior.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543334/
Signed-off-by: Rob Clark <robdclark@chromium.org>
We have the necessary information, so explain which bit does what.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543332/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add a definition of the GMU_AHB_FENCE_STATUS_CLR reg and CP_PROTECT_CNTL
bitfields.
This may be substituted with a mesa header sync.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543330/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The range is actually len+1.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/545099/
Since the revision becomes an opaque identifier with future GPUs, move
away from treating different ranges of bits as having a given meaning.
This means that we need to explicitly list different patch revisions in
the device table.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549782/
Let's just stash it in adreno_platform_config rather than looking it up
in N different places.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549777/
This is used in a few places, including one that is parsed by userspace
tools. So let's standardize it a bit better.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549774/
Sometimes it is useful to know the sub-generation (or "family"). And in
any case, this helps us get away from infering the generation from the
numerical chip-id.
v2: Fix is_a2xx() typo
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549773/
All of these are derivatives of a630.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549770/
This simplifies the code.
v2: Use a table of structs instead of flat uint32_t[]
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549769/
There are cases where there are differences due to SoC integration.
Such as cache-coherency support, and (in the next patch) e-fuse to
speedbin mappings.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549767/
It is better to explicitly list it. With the move to opaque chip-id's
for future devices, we should avoid trying to infer things like
generation from the numerical value.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549765/
Rather than just open coding a list of gpu-id matches.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549764/
This just duplicates what is in adreno_info, and can cause confusion if
used before it is set.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549761/
Even in the ocmem case, the allocated ocmem buffer size should match the
requested size.
v2: Move stray hunk to previous patch, make OCMEM size mismatch an error
condition.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549759/
No real need to have marketing names in the kernel.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/549757/
When we have a struct pci_dev *, use pci_dev_id() instead of manually
composing the ID with PCI_DEVID() from dev->bus->number and dev->devfn.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230807134858.116051-4-wangxiongfeng2@huawei.com
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
When we have a struct pci_dev *, use pci_dev_id() instead of manually
composing the ID with PCI_DEVID() from dev->bus->number and dev->devfn.
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20230807134858.116051-3-wangxiongfeng2@huawei.com
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Catching-up with drm-next and drm-intel-gt-next.
It will unblock a code refactor around the platform
definitions (names vs acronyms).
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Report VBIOS version in vbios_version sysfs node instead of part number.
Part number remains constant for a SKU type.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix a regression in blank pixel data caused by coding mistake
- Fix a bug when searching for insert_above_mpcc
- Update add plane to context logic with a new algorithm
- Adjust visual confirm dpp height offset to be 1/240 of v addressable
- Add interface to enable DPIA trace
- Support plane clip with zero recout size
- Blocking invalid 420 modes on HDMI TMDS for DCN31 and DCN314
- Make mpc32 functions available to future DCNs
- Change HDCP update sequence for DM
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Refactor the sequence in hdcp_update_display() to use
mod_hdcp_update_display().
Previous sequence:
- remove()->add()
This Sequence was used to update the display, (mod_hdcp_update_display
didn't exist at the time). This meant for any hdcp updates (type changes,
enable/disable) we would remove, reconstruct, and add. This leads to
unnecessary calls to psp eventually
New Sequence using mod_hdcp_update_display():
- add() once when stream is enabled
- use update() for all updates
The update function checks for prev == new states and will not
unnecessarily end up calling psp via add/remove.
Reviewed-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Secondary DPP pipes are used for rendering secondary layers of planes.
The name "for layer" doesn't make it obvious. The function is acquiring
a free pipe as secondary dpp pipe only. We rename it so it is more obvious.
In a future follow up change, we want to add functions to acquire free pipe as
opp head pipe or otg master pipe as well. They will have their separate
allocation priority.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
generic dc resource file should not know what an optimal idle pipe is
because this is dcn hardware dependent.
[how]
We move the optimial pipe searching logic in dcn specific layer.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
In overclocking scenarios the max memclk could be higher
than the DC mode limit. However, for configs that don't
support MCLK switching we need to set the max memclk to
the overclocked max instead of the DC mode max or we
could result in underflow.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new vendor ID code for reference
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Mike Hsieh <mike.hsieh@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
HDMI TMDS does not have ODM support. Filtering 420 modes that
exceed the 4096 FMT limitation on DCN314 will resolve
intermittent corruptions issues.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
HDMI TMDS does not have ODM support. Filtering 420 modes that
exceed the 4096 FMT limitation on DCN31 will resolve
intermittent corruptions issues.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Revert commit 6917b0b711 ("drm/amd/display: Read down-spread percentage from lut to adjust dprefclk.")
This change was causing 240hz display to not light up after s0i3.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
With previous ODM + MPO policy we will only allocate pipes when MPO plane
has intersection with current ODM slice. With this policy we have to indicate
scaling change when plane clip is updated in case plane clip change causes
MPO plane to go in or out current ODM slice.
With new ODM + MPO policy we allocate pipe independent from plane clip size
so we no longer treat it as a scaling change. There no need to do a full update
due to clip size change anymore.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
For timing with large v addressable visual confirm is just too small. It is difficult
to tell visually which DPP we are using. On the other hand with timing with small
v addressable visual confirm is too large and covers the UI area.
[how]
We calculate visual confirm dpp height offset based on v addressable so it stays
relatively the same height i.e. 1/240 verticle portion of the screen.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Preivous algorithm for finding an optimal idle pipe for a new plane was
implemented to handle dynamic pipe allocation when MPO plane moves
from one ODM slice to the other. Now pipe allocation is more static so
it no longer depends on the MPO plane's position. We are simplifying
our logic and remove unnecessary handling in our code.
[how]
Apply a new simplified version of pipe resource allocation logic to reduce
unnecessary flip delay caused by swapping secondary dpp pipe to other
MPC blending tree.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We only acquire MPO pipe for blending tree where the plane clip will
be rendered. If an MPO plane is outside current ODM slice rect, we will
skip pipe allocation. With new programming policy we want to allocate
pipes for every ODM slice blending tree even for those whose ODM slice
rect doesn't intersect with plane clip. This is aligned with DML validation
so the pipe topology is programmed independently from the plane's
position and dst plane size.
[how]
- Remove the logic to allocate pipe only when the MPO plane intersects
with ODM slice and replace with the new logic to always allocate pipes.
- Remove the logic to tear down ODM configuration in favor for supporting
secondary MPO planes.
- Remove the logic to use full update when MPO goes accross ODM slice
boundary.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
If plane clip is outside current pipe's ODM slice rect, our logic will
fail validation because we assume that when a pipe is acquired
to support a plane clip, it must blend some portion of the plane
on the screen. This assumption needs to be changed.
When a pipe is acquired to render the plane, we are now allowing
it to support a case where it can take minimum viewport and draw
with zero recout size when the plane clip is outside current ODM
slice rect. The reason is that we want to allocate and get the pipe
pre-programmed so it is ready to be rendered when user moves
the plane over to the current ODM slice with a fast update.
Whereas with the existing solution when user moves the plane
over, we will need to allocate a pipe as needed and power it up
and program it through a full update. This not only impacts the
user experience with unnecessary delay of a frame but also
doesn't generate any benefit to the user because DML doesn't
support it. DML will invalidate based on worst case scenario and
it doesn't depend on the plane location. So having our
programming sequence support such dynamic pipe allocation is
not meaningful anyway.
[how]
In build scaler params allow recout to be zero size and if viewport
is smaller than minimum, set minimum viewport size.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Flash of corruption observed when UCLK switching after transitioning
from DTBCLK to DPREFCLK on subVP(DP) + subVP(HDMI) config
Scenario where DPREFCLK is required instead of DTBCLK is not expected
[How]
Always set the DTBCLK source as DTBCLK0
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Front-end would be programmed using the stream update flags set
from the previous update and the full update should be triggered
whenever commit_state_no_check gets called.
[How]
Set all stream update flags before programming the front-end
Clear all flags that got set to avoid redundant programming
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Austin Zheng <austin.zheng@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the mpc32 functions available for future DCNs to use
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wesley Chalmers <wesley.chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Currently, when insert_plane is called with insert_above_mpcc
parameter that is equal to tree->opp_list, the function returns NULL.
[HOW]
Instead, the function should insert the plane at the top of the tree.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wesley Chalmers <wesley.chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DPIA traces from DMUB is not enabled by default, which is
less convenient to debug DPIA related issues because we have
to resort to other means to enable DPIA trace.
[How]
Reuse existing DC debug mask to enable DPIA trace log from
kernel command line. This makes debugging DPIA issues easier
especially when system power state (suspend/reboot) is involved.
To turn on DPIA trace, simply add "amdgpu.dcdebugmask=0x80" to
kernel command line.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DPIA traces from DMUB is not enabled by default, which is
less convenient to debug DPIA related issues because we have
to resort to other debug tools to enable DPIA trace.
[How]
Exposes interfaces to update trace mask from the DMUB GPINT commands.
Also provides DC implementations to enable DPIA trace.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There was unfortunately a coding mistake. It gets caught with an ultrawide monitor
that requires ODM 4:1 combine. We are blanking or unblanking pixel data we
are supposed to enumerate through all ODM pipes and program DPG for each
of those pipes. However the coding mistake causes us to program only the
first and last ODM pipes.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Martin Leung <martin.leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MES allocates process level doorbells, but there is no userspace
client to consume it. It was only being used for the MES ring
tests (in kernel), and was written by kernel doorbell write.
The previous patch of this series has changed the MES ring test code to
use kernel level MES doorbells. This patch now cleans up the process level
doorbell allocation code which is not required.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch:
- Removes the existing doorbell management code, and its variables
from the doorbell_init function, it will be done in doorbell
manager now.
- uses the doorbell page created for MES kernel level needs (doorbells
for MES self tests)
- current MES code was allocating MES doorbells in MES process context,
but those were getting written using kernel doorbell calls. This patch
instead allocates a MES kernel doorbell for this (in add_hw_queue).
V2: Create an extra page of doorbells for MES during kernel doorbell
creation (Alex)
V4: Move MES doorbell size and page offset objects in this patch from
patch 6.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch removes some variables and functions from KFD
doorbell handling code, which are no more required since
doorbell manager is handling doorbell calculations.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We should be checking to see if async flips are supported in
amdgpu_dm_atomic_check() (i.e. not dm_crtc_helper_atomic_check()). Also,
async flipping isn't supported if a plane's framebuffer changes memory
domains during an atomic commit. So, move the check from
dm_crtc_helper_atomic_check() to amdgpu_dm_atomic_check() and check if
the memory domain has changed in amdgpu_dm_atomic_check().
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2733
Fixes: c1e18c44dc ("drm/amd/display: only accept async flips for fast updates")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch:
- adds a doorbell object in kfd pdd structure.
- allocates doorbells for a process while creating its queue.
- frees the doorbells with pdd destroy.
- moves doorbell bitmap init function to kfd_doorbell.c
PS: This patch ensures that we don't break the existing KFD
functionality, but now KFD userspace library should also
create doorbell pages as AMDGPU GEM objects using libdrm
functions in userspace. The reference code for the same
is available with AMDGPU Usermode queue libdrm MR. Once
this is done, we will not need to create process doorbells
in kernel.
V2: - Do not use doorbell wrapper API, use amdgpu_bo_create_kernel
instead (Alex).
- Do not use custom doorbell structure, instead use separate
variables for bo and doorbell_bitmap (Alex)
V3:
- Do not allocate doorbell page with PDD, delay doorbell process
page allocation until really needed (Felix)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felilx.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch:
- adds a doorbell bo in kfd device structure.
- creates doorbell page for kfd kernel usages.
- updates the get_kernel_doorbell and free_kernel_doorbell functions
accordingly
V2: Do not use wrapper API, use direct amdgpu_create_kernel(Alex)
V3:
- Move single variable declaration below (Christian)
- Add a to-do item to reuse the KGD kernel level doorbells for
KFD for non-MES cases, instead of reserving one page (Felix)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>