Commit graph

1,215,304 commits

Author SHA1 Message Date
Christoph Hellwig
4a8b719f95 fs: remove emergency_thaw_bdev
Fold emergency_thaw_bdev into it's only caller, to prepare for buffer.c
to be built only when buffer_head support is enabled.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230801172201.1923299-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-02 09:13:09 -06:00
Masami Hiramatsu
b65413768a x86/kprobes: Prohibit probing on compiler generated CFI checking code
Prohibit probing on the compiler generated CFI typeid checking code
because it is used for decoding typeid when CFI error happens.

The compiler generates the following instruction sequence for indirect
call checks on x86;

   movl    -<id>, %r10d       ; 6 bytes
   addl    -4(%reg), %r10d    ; 4 bytes
   je      .Ltmp1             ; 2 bytes
   ud2                        ; <- regs->ip

And handle_cfi_failure() decodes these instructions (movl and addl)
for the typeid and the target address. Thus if we put a kprobe on
those instructions, the decode will fail and report a wrong typeid
and target address.

Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/168904025785.116016.12766408611437534723.stgit@devnote2
2023-08-02 16:27:07 +02:00
Phil Auld
88c56cfeae sched/fair: Block nohz tick_stop when cfs bandwidth in use
CFS bandwidth limits and NOHZ full don't play well together.  Tasks
can easily run well past their quotas before a remote tick does
accounting.  This leads to long, multi-period stalls before such
tasks can run again. Currently, when presented with these conflicting
requirements the scheduler is favoring nohz_full and letting the tick
be stopped. However, nohz tick stopping is already best-effort, there
are a number of conditions that can prevent it, whereas cfs runtime
bandwidth is expected to be enforced.

Make the scheduler favor bandwidth over stopping the tick by setting
TICK_DEP_BIT_SCHED when the only running task is a cfs task with
runtime limit enabled. We use cfs_b->hierarchical_quota to
determine if the task requires the tick.

Add check in pick_next_task_fair() as well since that is where
we have a handle on the task that is actually going to be running.

Add check in sched_can_stop_tick() to cover some edge cases such
as nr_running going from 2->1 and the 1 remains the running task.

Reviewed-By: Ben Segall <bsegall@google.com>
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230712133357.381137-3-pauld@redhat.com
2023-08-02 16:19:26 +02:00
Phil Auld
c98c18270b sched, cgroup: Restore meaning to hierarchical_quota
In cgroupv2 cfs_b->hierarchical_quota is set to -1 for all task
groups due to the previous fix simply taking the min.  It should
reflect a limit imposed at that level or by an ancestor. Even
though cgroupv2 does not require child quota to be less than or
equal to that of its ancestors the task group will still be
constrained by such a quota so this should be shown here. Cgroupv1
continues to set this correctly.

In both cases, add initialization when a new task group is created
based on the current parent's value (or RUNTIME_INF in the case of
root_task_group). Otherwise, the field is wrong until a quota is
changed after creation and __cfs_schedulable() is called.

Fixes: c53593e5cb ("sched, cgroup: Don't reject lower cpu.max on ancestors")
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ben Segall <bsegall@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230714125746.812891-1-pauld@redhat.com
2023-08-02 16:19:26 +02:00
Johannes Weiner
113d0a6b39 MAINTAINERS: Add Peter explicitly to the psi section
Peter is kind enough to route the low-volume psi patches through the
scheduler tree, but he is frequently not CC'd on them.

While he is matched through the SCHEDULER maintainers and reviewers on
kern/sched/*, that list is long, and mostly not applicable to psi
code. Thus, patch submitters often just CC the explicit PSI entries.

Add him to that section, to make sure he gets those patches.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230801133235.GA1766885@cmpxchg.org
2023-08-02 16:19:25 +02:00
Randy Dunlap
98dfdd9ee9 sched/psi: Select KERNFS as needed
Users of KERNFS should select it to enforce its being built, so
do this to prevent a build error.

In file included from ../kernel/sched/build_utility.c:97:
../kernel/sched/psi.c: In function 'psi_trigger_poll':
../kernel/sched/psi.c:1479:17: error: implicit declaration of function 'kernfs_generic_poll' [-Werror=implicit-function-declaration]
 1479 |                 kernfs_generic_poll(t->of, wait);

Fixes: aff037078e ("sched/psi: use kernfs polling functions for PSI trigger polling")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Link: lore.kernel.org/r/202307310732.r65EQFY0-lkp@intel.com
2023-08-02 16:19:25 +02:00
Andi Shyti
a899db5b8f drm/i915: Remove unnecessary include
The inclusion of intel_gt_defines.h was initially added to
i915_drv.h to provide the definition of I915_MAX_GT, where it was
originally defined.

However, since I915_MAX_GT is now included in
i915_gem_object_types.h, it sis no longer required in i915_drv.h.

Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801141955.383305-5-andi.shyti@linux.intel.com
2023-08-02 15:56:53 +02:00
Chris Wilson
d6c531ab48 drm/i915: Invalidate the TLBs on each GT
With multi-GT devices, the object may have been bound on each GT.
Invalidate the TLBs across all GT before releasing the pages
back to the system.

Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Fei Yang <fei.yang@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801141955.383305-4-andi.shyti@linux.intel.com
2023-08-02 15:56:44 +02:00
Stefan Binding
cfad53a99d ALSA: hda: cs35l41: Print amp configuration after bind
Print amp configuration information to be able to confirm ACPI
_DSD information (and other useful info) for each amp on each
system using CS35L41, without having to get the acpidump.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230802121235.467358-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-08-02 15:41:41 +02:00
Andi Shyti
a79d48846b i915/drm/gt: Move the gt defines in the gt directory
Create a new intel_gt_defines.h inside the gt/ directory as a
placeholder for all the generic GT based defines.

As of now place only I915_MAX_GT.

Co-developed-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801141955.383305-3-andi.shyti@linux.intel.com
2023-08-02 15:41:31 +02:00
Chris Wilson
568a2e6f0b drm/i915/gt: Move TLB invalidation to its own file
Prepare for supporting more TLB invalidation scenarios by moving
the current MMIO invalidation to its own file.

Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801141955.383305-2-andi.shyti@linux.intel.com
2023-08-02 15:40:11 +02:00
Benjamin Gray
86582e6189 powerpc/powermac: Use early_* IO variants in via_calibrate_decr()
On a powermac platform, via the call path:

  start_kernel()
    time_init()
      ppc_md.calibrate_decr() (pmac_calibrate_decr)
        via_calibrate_decr()

ioremap() and iounmap() are called. The unmap can enable interrupts
unexpectedly (cond_resched() in vunmap_pmd_range()), which causes a
warning later in the boot sequence in start_kernel().

Use the early_* variants of these IO functions to prevent this.

The issue is pre-existing, but is surfaced by commit 721255b982
("genirq: Use a maple tree for interrupt descriptor management").

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230706010816.72682-1-bgray@linux.ibm.com
2023-08-02 22:57:22 +10:00
Michael Ellerman
d1099e2276 powerpc/pseries: Honour current SMT state when DLPAR onlining CPUs
Integrate with the generic SMT support, so that when a CPU is DLPAR
onlined it is brought up with the correct SMT mode.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230705145143.40545-11-ldufour@linux.ibm.com
2023-08-02 22:49:46 +10:00
Michael Ellerman
73c58e7e14 powerpc: Add HOTPLUG_SMT support
Add support for HOTPLUG_SMT, which enables the generic sysfs SMT support
files in /sys/devices/system/cpu/smt, as well as the "nosmt" boot
parameter.

Implement the recently added hooks to allow partial SMT states, allow
any number of threads per core.

Tie the config symbol to HOTPLUG_CPU, which enables it on the major
platforms that support SMT. If there are other platforms that want the
SMT support that can be tweaked in future.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[ldufour: remove topology_smt_supported]
[ldufour: remove topology_smt_threads_supported]
[ldufour: select CONFIG_SMT_NUM_THREADS_DYNAMIC]
[ldufour: update kernel-parameters.txt]
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Link: https://msgid.link/20230705145143.40545-10-ldufour@linux.ibm.com
2023-08-02 22:49:43 +10:00
Michael Ellerman
3b3a4d0fe5 powerpc/pseries: Initialise CPU hotplug callbacks earlier
As part of the generic HOTPLUG_SMT code, there is support for disabling
secondary SMT threads at boot time, by passing "nosmt" on the kernel
command line.

The way that is implemented is the secondary threads are brought partly
online, and then taken back offline again. That is done to support x86
CPUs needing certain initialisation done on all threads. However powerpc
has similar needs, see commit d70a54e2d0 ("powerpc/powernv: Ignore
smt-enabled on Power8 and later").

For that to work the powerpc CPU hotplug callbacks need to be registered
before secondary CPUs are brought online, otherwise __cpu_disable()
fails due to smp_ops->cpu_disable being NULL.

So split the basic initialisation into pseries_cpu_hotplug_init() which
can be called early from setup_arch(). The DLPAR related initialisation
can still be done later, because it needs to do allocations.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230705145143.40545-9-ldufour@linux.ibm.com
2023-08-02 22:43:42 +10:00
Michael Ellerman
d82e6762b0 SMP core changes for powerpc
-----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmTDdHMTHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoawDEACf7tZeCfwnkEVzBO45mKujBstQyV+v
 yATR7YRFG3Li9VaRP/rOrFxh+UPM2YbvQCgcT2BECl5gkBm7j/jgTiL47atN5VCo
 Sg9fDzjkf6+A1ac62kriQT0EyhYYN/V6DxByhqSLvxev9626ge93wBKmChohGOgj
 j66PEg5z+Luw9aTdyKm3cEuXGYyCmdWTgZ6z4f4VI+rVBXFUMiZl28eMlLH+eyVM
 +ntkDoNw00TqypSrcSr8WEzJc3SNAqUsLOW+Mogm4AJK8sKeFtdkjCLFDcV1dLmZ
 9Ak8OxeQGNhh538yCLYiNDu57xpQffS4E2t+Pusv8ZHc6ww5J8vsPq3p9323LbyF
 FXcREHM8W5cKLdy4hzqeqKx2YK4shquYXH10WIbVQXqbxMUD5wGCYuQTS12V+QW0
 1Ut48/RS3a6kaKvX475enFrR/wQNSTJkM+ajFSGY3eSNp9v9EmTepw3aY8RXw+Gr
 QRxCuM4MgaUazJ0RtbjbzSRK2r8MObj+aurfvMQZGFmkkw0DiUZNOnb5VPZSrqb+
 laNQKKAdG99NlTNyvLSSgYTX+FM0AbqKVWnIO4b+3wMvYxfiENKDWVzdQWksNz6U
 J5j7qDqZQ45kEow0Xn0lKxz1zKdcJLZPFjExrgYkRTaRp7VwcQ8st2Lbj1XVk7Wr
 wqXouAvhBSqWEA==
 =jF0X
 -----END PGP SIGNATURE-----

Merge tag 'smp-core-for-ppc-23-07-28' of https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into topic/cpu-smt

SMP core changes for powerpc
2023-08-02 22:39:48 +10:00
Laurent Dufour
7f96539437 powerpc/kexec: fix minor typo
Function name in the descriptor was not correct.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307251721.bUGcsCeQ-lkp@intel.com/
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230725132759.53975-1-ldufour@linux.ibm.com
2023-08-02 22:22:19 +10:00
Uwe Kleine-König
bbfa509d63 powerpc/ep8248e: Mark driver as non removable
Instead of resorting to BUG() ensure that the driver isn't unbound by
suppressing its bind and unbind sysfs attributes. As the driver is
built-in there is no way to remove a device once bound.

As a nice side effect this allows to drop the remove function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230726081442.461026-1-u.kleine-koenig@pengutronix.de
2023-08-02 22:22:19 +10:00
Arnd Bergmann
54f30b83fe powerpc: address missing-prototypes warnings
There are a few warnings in powerpc64 defconfig builds after -Wmissing-prototypes
gets promoted from W=1 to the default warning set:

arch/powerpc/mm/book3s64/pgtable.c:422:6: error: no previous prototype for 'arch_report_meminfo' [-Werror=missing-prototypes]
arch/powerpc/platforms/cell/ras.c:275:5: error: no previous prototype for 'cbe_sysreset_hack' [-Werror=missing-prototypes]
arch/powerpc/platforms/cell/spu_manage.c:29:21: error: no previous prototype for 'spu_devnode' [-Werror=missing-prototypes]
arch/powerpc/platforms/pasemi/time.c:12:17: error: no previous prototype for 'pas_get_boot_time' [-Werror=missing-prototypes]
arch/powerpc/platforms/powermac/feature.c:1532:13: error: no previous prototype for 'g5_phy_disable_cpu1' [-Werror=missing-prototypes]
arch/powerpc/platforms/86xx/pic.c:28:13: error: no previous prototype for 'mpc86xx_init_irq' [-Werror=missing-prototypes]
drivers/pci/pci-sysfs.c:936:13: error: no previous prototype for 'pci_adjust_legacy_attr' [-Werror=missing-prototypes]

Address these by including the right header files or marking the
functions static. The audit.c one is a bit tricky since compat_audit.h
cannot include regular kernel headers tht have conflicting types on
32-bit powerpc.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[mpe: Drop change to __vmemmap_free() which only exists in mm]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230727122720.2558065-1-arnd@kernel.org
2023-08-02 22:22:19 +10:00
Benjamin Gray
c3062ede99 selftests/powerpc/ptrace: Declare test temporary variables as volatile
While the target is volatile, the temporary variables used to access the
target cast away the volatile. This is undefined behaviour, and a
compiler may optimise away/reorder these accesses, breaking the test.

This was observed with GCC 13.1.1, but it can be difficult to reproduce
because of the dependency on compiler behaviour.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230725005841.28854-5-bgray@linux.ibm.com
2023-08-02 22:22:19 +10:00
Benjamin Gray
fc6732a855 selftests/powerpc/ptrace: Fix typo in pid_max search error
pid_max_addr() searches for the 'pid_max' symbol in /proc/kallsyms, and
prints an error if it cannot find it. The error message has a typo,
calling it pix_max.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230725005841.28854-4-bgray@linux.ibm.com
2023-08-02 22:22:19 +10:00
Benjamin Gray
68877ff20a selftests/powerpc/ptrace: Explain why tests are skipped
Many tests require specific hardware features/configurations that a
typical machine might not have. As a result, it's common to see a test
is skipped. But it is tedious to find out why a test is skipped
when all it gives is the file location of the skip macro.

Convert SKIP_IF() to SKIP_IF_MSG(), with appropriate descriptions of why
the test is being skipped. This gives a general idea of why a test is
skipped, which can be looked into further if it doesn't make sense.

Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230725005841.28854-3-bgray@linux.ibm.com
2023-08-02 22:22:19 +10:00
Rob Herring
81d7cac4d1 powerpc: Explicitly include correct DT includes
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
[mpe: Fixup maple/setup.c which needs platform_device]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230724210247.778034-1-robh@kernel.org
2023-08-02 22:22:19 +10:00
Nicholas Piggin
e43c0a0c3c powerpc/64s/radix: combine final TLB flush and lazy tlb mm shootdown IPIs
This performs lazy tlb mm shootdown when doing the exit TLB flush when
all mm users go away and user mappings are removed, which avoids having
to do the lazy tlb mm shootdown IPIs on the final mmput when all kernel
references disappear.

powerpc/64s uses a broadcast TLBIE for the exit TLB flush if remote CPUs
need to be invalidated (unless TLBIE is disabled), so this doesn't
necessarily save IPIs but it does avoid a broadcast TLBIE which is quite
expensive.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Squash in preempt_disable/enable() fix from Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230524060821.148015-5-npiggin@gmail.com
2023-08-02 22:22:19 +10:00
Nicholas Piggin
177255afb4 powerpc: Add mm_cpumask warning when context switching
When context switching away from an mm, add a CONFIG_DEBUG_VM warning
check to ensure this CPU is still set in the mask. This could catch
bugs where the mask is improperly trimmed while the CPU is still using
the mm.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230524060821.148015-4-npiggin@gmail.com
2023-08-02 22:22:19 +10:00
Nicholas Piggin
f74b2a6c01 powerpc/64s: Use dec_mm_active_cpus helper
Avoid open-coded atomic_dec on mm->context.active_cpus and use the
function made for it. Add CONFIG_DEBUG_VM underflow checking on the
counter.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230524060821.148015-3-npiggin@gmail.com
2023-08-02 22:22:18 +10:00
Nicholas Piggin
c3c2e93753 powerpc: Account mm_cpumask and active_cpus in init_mm
init_mm mm_cpumask and context.active_cpus is not maintained at boot
and hotplug. This seems to be harmless because init_mm does not have a
userspace and so never gets user TLBs flushed, but it looks odd and it
prevents some sanity checks being added.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230524060821.148015-2-npiggin@gmail.com
2023-08-02 22:22:18 +10:00
Michael Ellerman
ab48181791 powerpc/64: Enable accelerated crypto algorithms in defconfig
Enable all the acclerated crypto algorithms as modules in the 64-bit
defconfig, to get more test coverage.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230717115223.286158-1-mpe@ellerman.id.au
2023-08-02 22:22:18 +10:00
Omar Sandoval
026fa6c52d powerpc/crypto: don't build aes-gcm-p10 by default
None of the other accelerated crypto modules are built by default.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/40d9c7ebe82c9a9d4ace542ac433753d2f22c6a0.1689007370.git.osandov@osandov.com
2023-08-02 22:22:18 +10:00
Omar Sandoval
9d6e1c21e1 powerpc/crypto: fix missing skcipher dependency for aes-gcm-p10
My stripped down configuration fails to build with:

  ERROR: modpost: "skcipher_walk_aead_encrypt" [arch/powerpc/crypto/aes-gcm-p10-crypto.ko] undefined!
  ERROR: modpost: "skcipher_walk_done" [arch/powerpc/crypto/aes-gcm-p10-crypto.ko] undefined!
  ERROR: modpost: "skcipher_walk_aead_decrypt" [arch/powerpc/crypto/aes-gcm-p10-crypto.ko] undefined!

Fix it by selecting CRYPTO_SKCIPHER.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/c55ad70799e027a3d2756b85ccadc0af52ae8915.1689007370.git.osandov@osandov.com
2023-08-02 22:22:18 +10:00
Christophe Leroy
3a24ea0df8 powerpc/kuap: Use ASM feature fixups instead of static branches
To avoid a useless nop on top of every uaccess enable/disable and
make life easier for objtool, replace static branches by ASM feature
fixups that will nop KUAP enabling instructions out in the unlikely
case KUAP is disabled at boottime.

Leave it as is on book3s/64 for now, it will be handled later when
objtool is activated on PPC64.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/671948788024fd890ec4ed175bc332dab8664ea5.1689091022.git.christophe.leroy@csgroup.eu
2023-08-02 22:22:18 +10:00
Christophe Leroy
eb52f66f0a powerpc/kuap: KUAP enabling/disabling functions must be __always_inline
Objtool reports following warnings:

  arch/powerpc/kernel/signal_32.o: warning: objtool:
    __prevent_user_access.constprop.0+0x4 (.text+0x4):
    redundant UACCESS disable

  arch/powerpc/kernel/signal_32.o: warning: objtool: user_access_begin+0x2c
    (.text+0x4c): return with UACCESS enabled

  arch/powerpc/kernel/signal_32.o: warning: objtool: handle_rt_signal32+0x188
    (.text+0x360): call to __prevent_user_access.constprop.0() with UACCESS enabled

  arch/powerpc/kernel/signal_32.o: warning: objtool: handle_signal32+0x150
    (.text+0x4d4): call to __prevent_user_access.constprop.0() with UACCESS enabled

This is due to some KUAP enabling/disabling functions being outline
allthough they are marked inline. Use __always_inline instead.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/ca5e50ddbec3867db5146ebddbc9a1dc0e443bc8.1689091022.git.christophe.leroy@csgroup.eu
2023-08-02 22:22:18 +10:00
Christophe Leroy
5222a1d514 powerpc/kuap: Simplify KUAP lock/unlock on BOOK3S/32
On book3s/32 KUAP is performed at segment level. At the moment,
when enabling userspace access, only current segment is modified.
Then if a write is performed on another user segment, a fault is
taken and all other user segments get enabled for userspace
access. This then require special attention when disabling
userspace access.

Having a userspace write access crossing a segment boundary is
unlikely. Having a userspace write access crossing a segment boundary
back and forth is even more unlikely. So, instead of enabling
userspace access on all segments when a write fault occurs, just
change which segment has userspace access enabled in order to
eliminate the case when more than one segment has userspace access
enabled. That simplifies userspace access deactivation.

There is however a corner case which is even more unlikely but has
to be handled anyway: an unaligned access which is crossing a
segment boundary. That would definitely require at least having
userspace access enabled on the two segments. To avoid complicating
the likely case for a so unlikely happening, handle such situation
like an alignment exception and emulate the store.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/8de8580513c1a6e880bad1ba9a69d3efad3d4fa5.1689091022.git.christophe.leroy@csgroup.eu
2023-08-02 22:22:18 +10:00
Christophe Leroy
26e0412082 powerpc/kuap: Use MMU_FTR_KUAP on all and refactor disabling kuap
All but book3s/64 use a static branch key for disabling kuap.
book3s/64 uses an mmu feature.

Refactor all targets to use MMU_FTR_KUAP like book3s/64.

For PPC32 that implies updating mmu features fixups once KUAP
has been initialised.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/6b3d7c977bad73378ea368bc6818e9c94ea95ab0.1689091022.git.christophe.leroy@csgroup.eu
2023-08-02 22:22:18 +10:00
Christophe Leroy
4589a2b789 powerpc/kuap: MMU_FTR_BOOK3S_KUAP becomes MMU_FTR_KUAP
In order to reuse MMU_FTR_BOOK3S_KUAP for other targets than BOOK3S,
rename it MMU_FTR_KUAP.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/c8b6f7b8cd0eeaace96879ed0e0a157faa619451.1689091022.git.christophe.leroy@csgroup.eu
2023-08-02 22:22:18 +10:00
Christophe Leroy
6b289911c8 powerpc/features: Add capability to update mmu features later
On powerpc32, features fixup is performed very early and that's too
early to read the cmdline and take into account 'nosmap' parameter.

On the other hand, no userspace access is performed that early and
KUAP feature fixup can be performed later.

Add a function to update mmu features. The function is passed a
mask with the features that can be updated.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/31b27ee2c9d338f4f82cd8cd69d6bff979495290.1689091022.git.christophe.leroy@csgroup.eu
2023-08-02 22:22:17 +10:00
Christophe Leroy
38bb171b95 powerpc/kuap: Fold kuep_is_disabled() into its only user
kuep_is_disabled() was introduced by commit 91bb30822a ("powerpc/32s:
Refactor update of user segment registers") but then all users but one
were removed by commit 526d4a4c77 ("powerpc/32s: Do kuep_lock() and
kuep_unlock() in assembly").

Fold kuep_is_disabled() into init_new_context() which is its only user.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/b2247147c0a8c830ac82966451647850df4a64da.1689091022.git.christophe.leroy@csgroup.eu
2023-08-02 22:22:17 +10:00
Christophe Leroy
1bec4adcd5 powerpc/kuap: Avoid useless jump_label on empty function
Disassembly of interrupt_enter_prepare() shows a pointless nop
before the mftb

  c000abf0 <interrupt_enter_prepare>:
  c000abf0:       81 23 00 84     lwz     r9,132(r3)
  c000abf4:       71 29 40 00     andi.   r9,r9,16384
  c000abf8:       41 82 00 28     beq-    c000ac20 <interrupt_enter_prepare+0x30>
  c000abfc: ===>  60 00 00 00     nop	<====
  c000ac00:       7d 0c 42 e6     mftb    r8
  c000ac04:       80 e2 00 08     lwz     r7,8(r2)
  c000ac08:       81 22 00 28     lwz     r9,40(r2)
  c000ac0c:       91 02 00 24     stw     r8,36(r2)
  c000ac10:       7d 29 38 50     subf    r9,r9,r7
  c000ac14:       7d 29 42 14     add     r9,r9,r8
  c000ac18:       91 22 00 08     stw     r9,8(r2)
  c000ac1c:       4e 80 00 20     blr
  c000ac20:       60 00 00 00     nop
  c000ac24:       7d 5a c2 a6     mfmd_ap r10
  c000ac28:       3d 20 de 00     lis     r9,-8704
  c000ac2c:       91 43 00 b0     stw     r10,176(r3)
  c000ac30:       7d 3a c3 a6     mtspr   794,r9
  c000ac34:       4e 80 00 20     blr

That comes from the call to kuap_loc(), allthough __kuap_lock() is an
empty function on the 8xx.

To avoid that, only perform kuap_is_disabled() check when there is
something to do with __kuap_lock().

Do the same with __kuap_save_and_lock() and
__kuap_get_and_assert_locked().

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/a854d25bea375d4ba6ca9c2617f9edbba397100a.1689091022.git.christophe.leroy@csgroup.eu
2023-08-02 22:22:17 +10:00
Christophe Leroy
880df2d46a powerpc/kuap: Avoid unnecessary reads of MD_AP
A disassembly of interrupt_exit_kernel_prepare() shows a useless read
of MD_AP register. This is shown by r9 being re-used immediately without
doing anything with the value read.

  c000e0e0:       60 00 00 00     nop
  c000e0e4: ===>  7d 3a c2 a6     mfmd_ap r9	<====
  c000e0e8:       7d 20 00 a6     mfmsr   r9
  c000e0ec:       7c 51 13 a6     mtspr   81,r2
  c000e0f0:       81 3f 00 84     lwz     r9,132(r31)
  c000e0f4:       71 29 80 00     andi.   r9,r9,32768

kuap_get_and_assert_locked() is paired with kuap_kernel_restore()
and are only used in interrupt_exit_kernel_prepare(). The value
returned by kuap_get_and_assert_locked() is only used by
kuap_kernel_restore().

On 8xx, kuap_kernel_restore() doesn't use the value read by
kuap_get_and_assert_locked() so modify kuap_get_and_assert_locked()
to not perform the read of MD_AP and return 0 instead.

The same applies on BOOKE.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/bcbc84c2dd90bb1021da792b1968cdc22112dad8.1689091022.git.christophe.leroy@csgroup.eu
2023-08-02 22:22:17 +10:00
Chancel Liu
a38a4090e2
ASoC: fsl_micfil: Use SET_SYSTEM_SLEEP_PM_OPS to simplify PM
Use SET_SYSTEM_SLEEP_PM_OPS to simplify suspend and resume function.
fsl_micfil_suspend() and fsl_micfil_resume() can be deleted.

Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230802052117.1293029-4-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-02 13:10:34 +01:00
Chancel Liu
367365051b
ASoC: fsl_micfil: Add fsl_micfil_use_verid function
fsl_micfil_use_verid() can help to parse the version info in VERID and
PARAM registers. Since the two registers are added only on i.MX93
platform, a member flag called use_verid is introduced to soc data
structure which indicates acquiring MICFIL version.

Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230802052117.1293029-3-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-02 13:10:33 +01:00
Chancel Liu
51d765f79c
ASoC: fsl_micfil: Add new registers and new bit definition
MICFIL IP is upgraded on i.MX93 platform. These new registers and new
bit definition are added to complete the register list.

Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230802052117.1293029-2-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-02 13:10:32 +01:00
Anshuman Khandual
c00701125c coresight: trbe: Directly use ID_AA64DFR0_EL1_TraceBuffer_IMP
is_trbe_available() checks for the TRBE support via extracting TraceBuffer
field value from ID_AA64DFR0_EL1, and ensures that it is implemented. This
replaces the open encoding '0b0001' with 'ID_AA64DFR0_EL1_TraceBuffer_IMP'
which is now available via sysreg tools. Functional change is not intended.

Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230802063658.1069813-1-anshuman.khandual@arm.com
2023-08-02 12:53:28 +01:00
Dmitry Antipov
6f092c98dc wifi: ath11k: simplify ath11k_mac_validate_vht_he_fixed_rate_settings()
In ath11k_mac_validate_vht_he_fixed_rate_settings() ar->ab->peers
list is not altered so list_for_each_entry() should be safe.

Compile tested only.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230726092113.78794-1-dmantipov@yandex.ru
2023-08-02 14:52:15 +03:00
Aditya Kumar Singh
72c8caf904 wifi: ath11k: fix band selection for ppdu received in channel 177 of 5 GHz
5 GHz band channel 177 support was added with the commit e5e94d10c8 ("wifi:
ath11k: add channel 177 into 5 GHz channel list"). However, during processing
for the received ppdu in ath11k_dp_rx_h_ppdu(), channel number is checked only
till 173. This leads to driver code checking for channel and then fetching the
band from it which is extra effort since firmware has already given the channel
number in the metadata.

Fix this issue by checking the channel number till 177 since we support
it now.

Found via code review. Compile tested only.

Fixes: e5e94d10c8 ("wifi: ath11k: add channel 177 into 5 GHz channel list")
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230726044624.20507-1-quic_adisi@quicinc.com
2023-08-02 14:48:40 +03:00
Jeffrey Hugo
14a2714085 docs: ABI: sysfs-bus-mhi: Update contact info
@codeaurora.org email addresses are no longer valid and will bounce to
sender.  Also, Bhaumik has previously indicated he is no longer interested
in participating in MHI bus discussions.

Update contact info from Bhaumik to the mhi mail list so that mails will
be routed to the MHI maintainers and interested parties.

Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20230628182346.3855-1-quic_jhugo@quicinc.com
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2023-08-02 16:51:46 +05:30
Otto Pflüger
3a63ef6e4b drm/tiny: panel-mipi-dbi: Allow sharing the D/C GPIO
Displays that are connected to the same SPI bus may share the D/C GPIO.
Use GPIOD_FLAGS_BIT_NONEXCLUSIVE to allow access to the same GPIO for
multiple panel-mipi-dbi instances. Exclusive access to the GPIO during
transfers is ensured by the locking in drm_mipi_dbi.c.

Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230724065654.5269-3-otto.pflueger@abscue.de
2023-08-02 13:18:34 +02:00
Otto Pflüger
8cc8ccbaa5 drm/mipi-dbi: Lock SPI bus before setting D/C GPIO
Multiple displays may be connected to the same bus and share a D/C GPIO,
so the display driver needs exclusive access to the bus to ensure that
it can control the D/C GPIO safely.

Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230724065654.5269-2-otto.pflueger@abscue.de
2023-08-02 13:18:07 +02:00
Yang Li
34093c9fa0 net: Remove duplicated include in mac.c
./drivers/net/ethernet/freescale/fman/mac.c: linux/of_platform.h is included more than once.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6039
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-02 11:42:47 +01:00
Willem de Bruijn
bd60438eeb selftests/net: report rcv_mss in tcp_mmap
tcp_mmap tests TCP_ZEROCOPY_RECEIVE. If 0% of data is received using
mmap, this may be due to mss. Report rcv_mss to identify this cause.

Output of a run failed due to too small mss:

    received 32768 MB (0 % mmap'ed) in 8.40458 s, 32.7057 Gbit
      cpu usage user:0.027922 sys:8.21126, 251.44 usec per MB, 3252 c-switches, rcv_mss 1428

Output on a successful run:

    received 32768 MB (99.9507 % mmap'ed) in 4.69023 s, 58.6064 Gbit
      cpu usage user:0.029172 sys:2.56105, 79.0473 usec per MB, 57591 c-switches, rcv_mss 4096

Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-02 11:40:49 +01:00