Commit graph

1,215,304 commits

Author SHA1 Message Date
Alexandre Ghiti
2569606720
selftests: riscv: Fix compilation error with vstate_exec_nolibc.c
The following error happens:

In file included from vstate_exec_nolibc.c:2:
/usr/include/riscv64-linux-gnu/sys/prctl.h:42:12: error: conflicting types for ‘prctl’; h
ave ‘int(int, ...)’
   42 | extern int prctl (int __option, ...) __THROW;
      |            ^~~~~
In file included from ./../../../../include/nolibc/nolibc.h:99,
                 from <command-line>:
./../../../../include/nolibc/sys.h:892:5: note: previous definition of ‘prctl’ with type
‘int(int,  long unsigned int,  long unsigned int,  long unsigned int,  long unsigned int)
’
  892 | int prctl(int option, unsigned long arg2, unsigned long arg3,
      |     ^~~~~

Fix this by not including <sys/prctl.h>, which is not needed here since
prctl syscall is directly called using its number.

Fixes: 7cf6198ce2 ("selftests: Test RISC-V Vector prctl interface")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230713115829.110421-1-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-02 13:48:10 -07:00
John Hubbard
8c82d2bf59
selftests/riscv: fix potential build failure during the "emit_tests" step
The riscv selftests (which were modeled after the arm64 selftests) are
improperly declaring the "emit_tests" target to depend upon the "all"
target. This approach, when combined with commit 9fc96c7c19
("selftests: error out if kernel header files are not yet built"), has
caused build failures [1] on arm64, and is likely to cause similar
failures for riscv.

To fix this, simply remove the unnecessary "all" dependency from the
emit_tests target. The dependency is still effectively honored, because
again, invocation is via "install", which also depends upon "all".

An alternative approach would be to harden the emit_tests target so that
it can depend upon "all", but that's a lot more complicated and hard to
get right, and doesn't seem worth it, especially given that emit_tests
should probably not be overridden at all.

[1] https://lore.kernel.org/20230710-kselftest-fix-arm64-v1-1-48e872844f25@kernel.org

Fixes: 9fc96c7c19 ("selftests: error out if kernel header files are not yet built")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230712193514.740033-1-jhubbard@nvidia.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-02 13:47:47 -07:00
Justin Stitt
12d61a1bc2
RISC-V: cpu: refactor deprecated strncpy
`strncpy` is deprecated for use on NUL-terminated destination strings [1].

Favor not copying strings onto stack and instead use strings directly.
This avoids hard-coding sizes and buffer lengths all together.

Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230802-arch-riscv-kernel-v2-1-24266e85bc96@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-08-02 13:45:28 -07:00
Bibo Mao
b859b018aa KVM: selftests: use unified time type for comparison
With test case kvm_page_table_test, start time is acquired with
time type CLOCK_MONOTONIC_RAW, however end time in timespec_elapsed()
is acquired with time type CLOCK_MONOTONIC. This can cause inaccurate
elapsed time calculation due to mixing timebases, e.g. LoongArch in
particular will see weirdness.

Modify kvm_page_table_test to use unified time type CLOCK_MONOTONIC for
start time.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20230731022405.854884-1-maobibo@loongson.cn
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-08-02 13:36:08 -07:00
Michal Luczaj
0de704d2d6 KVM: selftests: Extend x86's sync_regs_test to check for exception races
Attempt to set the to-be-queued exception to be both pending and injected
_after_ KVM_CAP_SYNC_REGS's kvm_vcpu_ioctl_x86_set_vcpu_events() squashes
the pending exception (if there's also an injected exception).  Buggy KVM
versions will eventually yell loudly about having impossible state when
processing queued excpetions, e.g.

  WARNING: CPU: 0 PID: 1115 at arch/x86/kvm/x86.c:10095 kvm_check_and_inject_events+0x220/0x500 [kvm]

  arch/x86/kvm/x86.c:kvm_check_and_inject_events():
  WARN_ON_ONCE(vcpu->arch.exception.injected &&
	       vcpu->arch.exception.pending);

Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20230728001606.2275586-3-mhal@rbox.co
[sean: split to separate patch, massage changelog and comment]
Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-08-02 13:33:20 -07:00
Michal Luczaj
60c4063b47 KVM: selftests: Extend x86's sync_regs_test to check for event vector races
Attempt to modify the to-be-injected exception vector to an illegal value
_after_ the sanity checks performed by KVM_CAP_SYNC_REGS's
arch/x86/kvm/x86.c:kvm_vcpu_ioctl_x86_set_vcpu_events().  Buggy KVM
versions will eventually yells loudly about attempting to inject a bogus
vector, e.g.

  WARNING: CPU: 0 PID: 1107 at arch/x86/kvm/x86.c:547 kvm_check_and_inject_events+0x4a0/0x500 [kvm]

  arch/x86/kvm/x86.c:exception_type():
  WARN_ON(vector > 31 || vector == NMI_VECTOR)

Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20230728001606.2275586-3-mhal@rbox.co
[sean: split to separate patch]
Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-08-02 13:33:20 -07:00
Michal Luczaj
ae895cbe61 KVM: selftests: Extend x86's sync_regs_test to check for CR4 races
Attempt to modify vcpu->run->s.regs _after_ the sanity checks performed by
KVM_CAP_SYNC_REGS's arch/x86/kvm/x86.c:sync_regs().  This can lead to some
nonsensical vCPU states accompanied by kernel splats, e.g. disabling PAE
while long mode is enabled makes KVM all kinds of confused:

 WARNING: CPU: 0 PID: 1142 at arch/x86/kvm/mmu/paging_tmpl.h:358 paging32_walk_addr_generic+0x431/0x8f0 [kvm]

 arch/x86/kvm/mmu/paging_tmpl.h:
 KVM_BUG_ON(is_long_mode(vcpu) && !is_pae(vcpu), vcpu->kvm)

Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20230728001606.2275586-3-mhal@rbox.co
[sean: see link]
Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-08-02 13:33:17 -07:00
Michal Luczaj
0d033770d4 KVM: x86: Fix KVM_CAP_SYNC_REGS's sync_regs() TOCTOU issues
In a spirit of using a sledgehammer to crack a nut, make sync_regs() feed
__set_sregs() and kvm_vcpu_ioctl_x86_set_vcpu_events() with kernel's own
copy of data.

Both __set_sregs() and kvm_vcpu_ioctl_x86_set_vcpu_events() assume they
have exclusive rights to structs they operate on. While this is true when
coming from an ioctl handler (caller makes a local copy of user's data),
sync_regs() breaks this contract; a pointer to a user-modifiable memory
(vcpu->run->s.regs) is provided. This can lead to a situation when incoming
data is checked and/or sanitized only to be re-set by a user thread running
in parallel.

Signed-off-by: Michal Luczaj <mhal@rbox.co>
Fixes: 01643c51bf ("KVM: x86: KVM_CAP_SYNC_REGS")
Link: https://lore.kernel.org/r/20230728001606.2275586-2-mhal@rbox.co
Signed-off-by: Sean Christopherson <seanjc@google.com>
2023-08-02 13:30:15 -07:00
Qiuxu Zhuo
ce53ad81ed EDAC/igen6: Fix the issue of no error events
Current igen6_edac checks for pending errors before the registration
of the error handler. However, there is a possibility that the error
occurs during the registration process, leading to unhandled pending
errors and no future error events. This issue can be reproduced by
repeatedly injecting errors during the loading of the igen6_edac.

Fix this issue by moving the pending error handler after the registration
of the error handler, ensuring that no pending errors are left unhandled.

Fixes: 10590a9d4f ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC")
Reported-by: Ee Wey Lim <ee.wey.lim@intel.com>
Tested-by: Ee Wey Lim <ee.wey.lim@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20230725080427.23883-1-qiuxu.zhuo@intel.com
2023-08-02 13:09:56 -07:00
Miaohe Lin
a2c15fece4 cgroup: fix obsolete function name above css_free_rwork_fn()
Since commit 8f36aaec9c ("cgroup: Use rcu_work instead of explicit rcu
and work item"), css_free_work_fn has been renamed to css_free_rwork_fn.
Update corresponding comment.

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-08-02 09:37:59 -10:00
Cai Xinchen
05f76ae95e cgroup/cpuset: fix kernel-doc
Add kernel-doc of param @rotor to fix warnings:

kernel/cgroup/cpuset.c:4162: warning: Function parameter or member
'rotor' not described in 'cpuset_spread_node'
kernel/cgroup/cpuset.c:3771: warning: Function parameter or member
'work' not described in 'cpuset_hotplug_workfn'

Signed-off-by: Cai Xinchen <caixinchen1@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-08-02 09:37:03 -10:00
Kamalesh Babulal
55a5956a55 cgroup: clean up printk()
Convert the only printk() to use pr_*() helper. No functional change.

Signed-off-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2023-08-02 09:36:24 -10:00
Brett Creeley
30ff01ee99 pds_core: Fix documentation for pds_client_register
The documentation above pds_client_register states that it returns 0 on
success and negative on error. However, it actually returns a positive
client ID on success and negative on error. Fix the documentation to
state exactly that.

Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: https://lore.kernel.org/r/20230801165833.1622-1-brett.creeley@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02 12:28:32 -07:00
Yue Haibing
f85b1c7da7 net: switchdev: Remove unused typedef switchdev_obj_dump_cb_t()
Commit 29ab586c3d ("net: switchdev: Remove bridge bypass support from switchdev")
leave this unused.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230801144209.27512-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02 12:28:26 -07:00
Yue Haibing
e12f2a6d1b netlabel: Remove unused declaration netlbl_cipsov4_doi_free()
Since commit b1edeb1023 ("netlabel: Replace protocol/NetLabel linking with refrerence counts")
this declaration is unused and can be removed.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20230801143453.24452-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02 12:28:22 -07:00
Yue Haibing
2fca1b5ef8 ila: Remove unnecessary file net/ila.h
Commit 642c2c9558 ("ila: xlat changes") removed ila_xlat_outgoing()
and ila_xlat_incoming() functions, then this file became unnecessary.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230801143129.40652-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02 12:28:16 -07:00
Shubhrajyoti Datta
03d4a10040 dt-bindings: clock: versal: Convert the xlnx,zynqmp-clk.txt to yaml
Convert the xlnx,zynqmp-clk.txt to yaml.
versal-clk.yaml already exists that's why ZynqMP is converted and
merged.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://lore.kernel.org/r/20230802043557.26478-1-shubhrajyoti.datta@amd.com
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-08-02 12:12:09 -07:00
Krzysztof Kozlowski
172044e30b dt-bindings: clock: xlnx,versal-clk: drop select:false
select:false makes the schema basically ignored and not effective, which
is clearly not what we want for a device binding.

Fixes: 352546805a ("dt-bindings: clock: Add bindings for versal clock driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230728165923.108589-1-krzysztof.kozlowski@linaro.org
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2023-08-02 12:12:05 -07:00
Yue Haibing
9e63a99c56 udp: Remove unused function declaration udp_bpf_get_proto()
commit 8a59f9d1e3 ("sock: Introduce sk->sk_prot->psock_update_sk_prot()")
left behind this.

Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230801133902.3660-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02 12:10:46 -07:00
Ruan Jinjie
497c3a5fb3 cirrus: cs89x0: fix the return value handle and remove redundant dev_warn() for platform_get_irq()
There is no possible for platform_get_irq() to return 0
and the return value of platform_get_irq() is more sensible
to show the error reason.

And there is no need to call the dev_warn() function directly to print
a custom message when handling an error from platform_get_irq() function as
it is going to display an appropriate error message in case of a failure.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20230801133121.416319-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02 12:10:39 -07:00
Kurt Kanzenbach
ae3683a342 net: dsa: hellcreek: Replace bogus comment
Replace bogus comment about matching the latched timestamp to one of the
received frames. That comment is probably copied from mv88e6xxx and true for
these switches. However, the hellcreek switch is configured to insert the
timestamp directly into the PTP packets.

While here, remove the other comments regarding the list splicing and locking as
well, because it doesn't add any value.

Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230801131647.84697-1-kurt@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02 12:10:35 -07:00
Ruan Jinjie
ae336f30d5 bnx2x: Remove unnecessary ternary operators
There are a little ternary operators, the true or false judgement
of which is unnecessary in C language semantics.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230801111928.300231-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02 12:09:13 -07:00
Ruan Jinjie
c7606d49e6 octeontx2: Remove unnecessary ternary operators
There are a little ternary operators, the true or false judgement
of which is unnecessary in C language semantics. So remove it
to clean Code.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20230801112638.317149-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02 12:08:27 -07:00
Ruan Jinjie
ae1d60c41e net: hisilicon: fix the return value handle and remove redundant netdev_err() for platform_get_irq()
There is no possible for platform_get_irq() to return 0
and the return value of platform_get_irq() is more sensible
to show the error reason.

And there is no need to call the netdev_err() function directly to print
a custom message when handling an error from platform_get_irq() function as
it is going to display an appropriate error message in case of a failure.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20230731073858.3633193-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02 12:06:23 -07:00
Linus Torvalds
4b954598a4 Description for this pull request:
- Fix page allocation failure from allocation bitmap by using kvmalloc_array/kvfree.
  - Add the check to validate if filename entries exceeds max filename length.
  - Fix potential deadlock condition from dir_emit*().
 -----BEGIN PGP SIGNATURE-----
 
 iQJKBAABCgA0FiEE6NzKS6Uv/XAAGHgyZwv7A1FEIQgFAmTKWboWHGxpbmtpbmpl
 b25Aa2VybmVsLm9yZwAKCRBnC/sDUUQhCIBGD/9MGxo2t2khD1TyT0tI4yyvzL8F
 ICmHdpgc0DWpkySo1MtALL7G6WtT2hul+Pv9XapJI99WlwtSBfQnYWaYiQJ2JYWZ
 dtE2ss5FL4FiQqUxdTbSfQsKF+bGc08muvu7gC8QvsUY3J4Cj8yf5wtawu/nkONR
 tK2kqzFsEFcfN4y2dqtGESi/pVvFjpIoLTimZkO47e7mNTmiSwvxcRvnFiwe79pC
 9V51NfxIwxHLtJk8i3s4farp/ehDEYU+EmoL1/wiFRtjdSddDqZv036NLIasXK3V
 ZRIRqYjyxceES7sEShPdrw/PgGdsfQ+oMD2R6rmOoA6lt9aWon1Y/B36tC7mTObe
 cAa5lvMk5paFoXfGgikF3/e51qMWo6eo4lGpJ1HHBHRLuVRlOskduXrJKo8Nuk/k
 JtuQ0rzYrqzlDJ+whwnY3YzckyFSfEHRjNn9Nm8f6LbNGsn6C+/QqLGyXt7uiXAt
 AM1pW3UMfDWHIZFRL6yFlrh6WDv4VKlK+h832x2D2F+8tPIBcAGw77+lMi1okQ6p
 +aqe3kKRNKtyUJyW+VvIBXIK3p2hIYZCstInZ1CKhkD+Z+wIzKVpRctYNg01DaT5
 YOGTE+SZH3lDTPVMP0SYUpQ2zAZcDBDS5lcq3HqqV8e4fEczmmR2p5cgbhv6rC2z
 0bcHJH44B2illfK1pQ==
 =S9Uj
 -----END PGP SIGNATURE-----

Merge tag 'exfat-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat

Pull exfat fixes from Namjae Jeon:

 - Fix page allocation failure from allocation bitmap by using
   kvmalloc_array/kvfree

 - Add the check to validate if filename entries exceeds max filename
   length

 - Fix potential deadlock condition from dir_emit*()

* tag 'exfat-for-6.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: release s_lock before calling dir_emit()
  exfat: check if filename entries exceeds max filename length
  exfat: use kvmalloc_array/kvfree instead of kmalloc_array/kfree
2023-08-02 11:43:06 -07:00
Paulo Alcantara
11260c3d60 smb: client: fix dfs link mount against w2k8
Customer reported that they couldn't mount their DFS link that was
seen by the client as a DFS interlink -- special form of DFS link
where its single target may point to a different DFS namespace -- and
it turned out that it was just a regular DFS link where its referral
header flags missed the StorageServers bit thus making the client
think it couldn't tree connect to target directly without requiring
further referrals.

When the DFS link referral header flags misses the StoraServers bit
and its target doesn't respond to any referrals, then tree connect to
it.

Fixes: a1c0d00572 ("cifs: share dfs connections and supers")
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2023-08-02 13:36:12 -05:00
Christoph Hellwig
9011e49d54 modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules
It has recently come to my attention that nvidia is circumventing the
protection added in 262e6ae708 ("modules: inherit
TAINT_PROPRIETARY_MODULE") by importing exports from their proprietary
modules into an allegedly GPL licensed module and then rexporting them.

Given that symbol_get was only ever intended for tightly cooperating
modules using very internal symbols it is logical to restrict it to
being used on EXPORT_SYMBOL_GPL and prevent nvidia from costly DMCA
Circumvention of Access Controls law suites.

All symbols except for four used through symbol_get were already exported
as EXPORT_SYMBOL_GPL, and the remaining four ones were switched over in
the preparation patches.

Fixes: 262e6ae708 ("modules: inherit TAINT_PROPRIETARY_MODULE")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-08-02 11:18:22 -07:00
Christoph Hellwig
95e7ebc682 rtc: ds1685: use EXPORT_SYMBOL_GPL for ds1685_rtc_poweroff
ds1685_rtc_poweroff is only used externally via symbol_get, which was
only ever intended for very internal symbols like this one.  Use
EXPORT_SYMBOL_GPL for it so that symbol_get can enforce only being used
on EXPORT_SYMBOL_GPL symbols.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Joshua Kinard <kumba@gentoo.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-08-02 11:18:22 -07:00
Christoph Hellwig
569820befb net: enetc: use EXPORT_SYMBOL_GPL for enetc_phc_index
enetc_phc_index is only used via symbol_get, which was only ever
intended for very internal symbols like this one.  Use EXPORT_SYMBOL_GPL
for it so that symbol_get can enforce only being used on
EXPORT_SYMBOL_GPL symbols.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-08-02 11:18:22 -07:00
Christoph Hellwig
d4a5c59a95 mmc: au1xmmc: force non-modular build and remove symbol_get usage
au1xmmc is split somewhat awkwardly into the main mmc subsystem driver,
and callbacks in platform_data that sit under arch/mips/ and are
always built in.  The latter than call mmc_detect_change through
symbol_get.  Remove the use of symbol_get by requiring the driver
to be built in.  In the future the interrupt handlers for card
insert/eject detection should probably be moved into the main driver,
and which point it can be built modular again.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Manuel Lauss <manuel.lauss@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
[mcgrof: squashed in depends on MMC=y suggested by Arnd]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-08-02 11:17:35 -07:00
Arnd Bergmann
0faa29c420 ARM: pxa: remove use of symbol_get()
The spitz board file uses the obscure symbol_get() function
to optionally call a function from sharpsl_pm.c if that is
built. However, the two files are always built together
these days, and have been for a long time, so this can
be changed to a normal function call.

Link: https://lore.kernel.org/lkml/20230731162639.GA9441@lst.de/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2023-08-02 11:15:11 -07:00
Vinay Belgaumkar
28e671114f drm/i915/guc/slpc: Restore efficient freq earlier
This should be done before the soft min/max frequencies are restored.
When we disable the "Ignore efficient frequency" flag, GuC does not
actually bring the requested freq down to RPn.

Specifically, this scenario-

- ignore efficient freq set to true
- reduce min to RPn (from efficient)
- suspend
- resume (includes GuC load, restore soft min/max, restore efficient freq)
- validate min freq has been resored to RPn

This will fail if we didn't first restore(disable, in this case) efficient
freq flag before setting the soft min frequency.

v2: Bring the min freq down to RPn when we disable efficient freq (Rodrigo)
Also made the change to set the min softlimit to RPn at init. Otherwise, we
were storing RPe there.

Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8736
Fixes: 55f9720dbf ("drm/i915/guc/slpc: Provide sysfs for efficient freq")
Fixes: 95ccf312a1 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency")
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230726010044.3280402-1-vinay.belgaumkar@intel.com
2023-08-02 11:08:02 -07:00
Linus Torvalds
79d65ee53b SCSI fixes on 20230731
Three small fixes, all in drivers.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZMffbCYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbQwAP443iHJ
 QxObdOIAoB0eQLtXlmmgS/TkSGjIu278qIsfSQEAzagC4bNt7RXzY1b61tz/OgFW
 sqsoEXGE6PBAbpj0FWk=
 =e77e
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Three small fixes, all in drivers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: pm80xx: Fix error return code in pm8001_pci_probe()
  scsi: zfcp: Defer fc_rport blocking until after ADISC response
  scsi: storvsc: Limit max_sectors for virtual Fibre Channel devices
2023-08-02 11:04:27 -07:00
ndesaulniers@google.com
79e8328e5a word-at-a-time: use the same return type for has_zero regardless of endianness
Compiling big-endian targets with Clang produces the diagnostic:

  fs/namei.c:2173:13: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical]
	} while (!(has_zero(a, &adata, &constants) | has_zero(b, &bdata, &constants)));
	          ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                                               ||
  fs/namei.c:2173:13: note: cast one or both operands to int to silence this warning

It appears that when has_zero was introduced, two definitions were
produced with different signatures (in particular different return
types).

Looking at the usage in hash_name() in fs/namei.c, I suspect that
has_zero() is meant to be invoked twice per while loop iteration; using
logical-or would not update `bdata` when `a` did not have zeros.  So I
think it's preferred to always return an unsigned long rather than a
bool than update the while loop in hash_name() to use a logical-or
rather than bitwise-or.

[ Also changed powerpc version to do the same  - Linus ]

Link: https://github.com/ClangBuiltLinux/linux/issues/1832
Link: https://lore.kernel.org/lkml/20230801-bitwise-v1-1-799bec468dc4@google.com/
Fixes: 36126f8f2e ("word-at-a-time: make the interfaces truly generic")
Debugged-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-08-02 10:23:36 -07:00
Wen Gong
3742928a52 wifi: ath12k: change to use dynamic memory for channel list of scan
Currently there are about 60 channels for 6 GHz, then the size of
chan_list in struct scan_req_params which is 40 is not enough to
fill all the channel list of 6 GHz.

Use dynamic memory to save the channel list of scan.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230717033431.21983-1-quic_wgong@quicinc.com
2023-08-02 20:00:59 +03:00
Wen Gong
68c35cc39b wifi: ath12k: trigger station disconnect on hardware restart
Currently after the hardware restart triggered from the driver, the
station interface connection remains intact, since a disconnect
trigger is not sent to userspace. This can lead to a problem in
targets where the wifi mac sequence is added by the firmware.

After the target restart, its wifi mac sequence number gets reset to
zero. Hence AP to which our device is connected will receive frames
with a wifi mac sequence number jump to the past, thereby resulting
in the AP dropping all these frames, until the frame arrives with a
wifi mac sequence number which AP was expecting.

To avoid such frame drops, its better to trigger a station disconnect
upon target hardware restart which can be done with API
ieee80211_reconfig_disconnect exposed to mac80211.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230714092555.2018-1-quic_wgong@quicinc.com
2023-08-02 20:00:25 +03:00
Baochen Qiang
7ee027abd4 wifi: ath12k: Use pdev_id rather than mac_id to get pdev
We are seeing kernel crash in below test scenario:
 1. make DUT connect to an WPA3 encrypted 11ax AP in Ch44 HE80
 2. use "wpa_cli -i <inf> disconnect" to disconnect
 3. wait for DUT to automatically reconnect

Kernel crashes while waiting, below shows the crash stack:
[  755.120868] BUG: kernel NULL pointer dereference, address: 0000000000000000
[  755.120871] #PF: supervisor read access in kernel mode
[  755.120872] #PF: error_code(0x0000) - not-present page
[  755.120873] PGD 0 P4D 0
[  755.120875] Oops: 0000 [#1] PREEMPT SMP NOPTI
[  755.120876] CPU: 7 PID: 0 Comm: swapper/7 Kdump: loaded Not tainted 5.19.0-rc1+ #3
[  755.120878] Hardware name: Intel(R) Client Systems NUC11PHi7/NUC11PHBi7, BIOS PHTGL579.0063.2021.0707.1057 07/07/2021
[  755.120879] RIP: 0010:ath12k_dp_process_rx_err+0x2b6/0x14a0 [ath12k]
[  755.120890] Code: 01 c0 48 c1 e0 05 48 8b 9c 07 b8 b2 00 00 48 c7 c0 61 ff 0e c1 48 85 db 53 48 0f 44 c6 48 c7 c6 80 9d 0f c1 50 e8 1a 25 00 00 <4c> 8b 3b 4d 8b 76 14 41 59 41 5a 41 8b 87 78 43 01 00 4d 85 f6 89
[  755.120891] RSP: 0018:ffff9a93402c8d10 EFLAGS: 00010282
[  755.120892] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000303
[  755.120893] RDX: 0000000000000000 RSI: ffffffff93b7cbe9 RDI: 00000000ffffffff
[  755.120894] RBP: ffff9a93402c8e50 R08: ffffffff93e65360 R09: ffffffff942e044d
[  755.120894] R10: 0000000000000000 R11: 0000000000000063 R12: ffff8dbec5420000
[  755.120895] R13: ffff8dbec5420000 R14: ffff8dbdefe9a0a0 R15: ffff8dbec5420000
[  755.120896] FS:  0000000000000000(0000) GS:ffff8dc2705c0000(0000) knlGS:0000000000000000
[  755.120897] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  755.120898] CR2: 0000000000000000 CR3: 0000000107be4005 CR4: 0000000000770ee0
[  755.120898] PKRU: 55555554
[  755.120899] Call Trace:
[  755.120900]  <IRQ>
[  755.120903]  ? ath12k_pci_write32+0x2e/0x80 [ath12k]
[  755.120910]  ath12k_dp_service_srng+0x214/0x2e0 [ath12k]
[  755.120917]  ath12k_pci_ext_grp_napi_poll+0x26/0x80 [ath12k]
[  755.120923]  __napi_poll+0x2b/0x1c0
[  755.120925]  net_rx_action+0x2a1/0x2f0
[  755.120927]  __do_softirq+0xfa/0x2e9
[  755.120929]  irq_exit_rcu+0xb9/0xd0
[  755.120932]  common_interrupt+0xc1/0xe0
[  755.120934]  </IRQ>
[  755.120934]  <TASK>
[  755.120935]  asm_common_interrupt+0x2c/0x40
[  755.120936] RIP: 0010:cpuidle_enter_state+0xdd/0x3a0
[  755.120938] Code: 00 31 ff e8 45 e2 74 ff 80 7d d7 00 74 16 9c 58 0f 1f 40 00 f6 c4 02 0f 85 a0 02 00 00 31 ff e8 69 79 7b ff fb 0f 1f 44 00 00 <45> 85 ff 0f 88 6d 01 00 00 49 63 d7 4c 2b 6d c8 48 8d 04 52 48 8d
[  755.120939] RSP: 0018:ffff9a934018be50 EFLAGS: 00000246
[  755.120940] RAX: ffff8dc2705c0000 RBX: 0000000000000002 RCX: 000000000000001f
[  755.120941] RDX: 000000afd0b532d3 RSI: ffffffff93b7cbe9 RDI: ffffffff93b8b66e
[  755.120942] RBP: ffff9a934018be88 R08: 0000000000000002 R09: 0000000000030500
[  755.120942] R10: ffff9a934018be18 R11: 0000000000000741 R12: ffffba933fdc0600
[  755.120943] R13: 000000afd0b532d3 R14: ffffffff93fcbc60 R15: 0000000000000002
[  755.120945]  cpuidle_enter+0x2e/0x40
[  755.120946]  call_cpuidle+0x23/0x40
[  755.120948]  do_idle+0x1ff/0x260
[  755.120950]  cpu_startup_entry+0x1d/0x20
[  755.120951]  start_secondary+0x10d/0x130
[  755.120953]  secondary_startup_64_no_verify+0xd3/0xdb
[  755.120956]  </TASK>
[  755.120956] Modules linked in: michael_mic rfcomm cmac algif_hash algif_skcipher af_alg bnep qrtr_mhi intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio kvm_intel qrtr snd_hda_codec_hdmi kvm irqbypass ath12k snd_hda_intel snd_seq_midi crct10dif_pclmul mhi ghash_clmulni_intel snd_intel_dspcfg snd_seq_midi_event aesni_intel qmi_helpers i915 snd_rawmidi crypto_simd snd_hda_codec cryptd cec intel_cstate snd_hda_core mac80211 rc_core nouveau snd_seq snd_hwdep btusb drm_buddy drm_ttm_helper nls_iso8859_1 snd_pcm ttm btrtl snd_seq_device wmi_bmof mxm_wmi input_leds cfg80211 joydev btbcm drm_display_helper snd_timer btintel mei_me libarc4 drm_kms_helper bluetooth i2c_algo_bit snd fb_sys_fops syscopyarea mei sysfillrect ecdh_generic soundcore sysimgblt ecc acpi_pad mac_hid sch_fq_codel ipmi_devintf ipmi_msghandler msr parport_pc ppdev lp ramoops parport reed_solomon drm efi_pstore ip_tables x_tables autofs4
[  755.120992]  hid_generic usbhid hid ax88179_178a usbnet mii nvme nvme_core rtsx_pci_sdmmc crc32_pclmul i2c_i801 intel_lpss_pci i2c_smbus intel_lpss rtsx_pci idma64 virt_dma vmd wmi video
[  755.121002] CR2: 0000000000000000

The crash is because, for WCN7850, only ab->pdev[0] is initialized, while mac_id here is
misused to retrieve pdev and it is not zero, leading to a NULL pointer access.

Fix this issue by getting pdev_id first and then use it to retrieve pdev.

Also fix some other code snippets which have the same issue.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230714080658.3140-1-quic_bqiang@quicinc.com
2023-08-02 19:59:04 +03:00
Wen Gong
1e9b1363e2 wifi: ath12k: avoid array overflow of hw mode for preferred_hw_mode
Currently ath12k define WMI_HOST_HW_MODE_DBS_OR_SBS=5 as max hw mode
for enum wmi_host_hw_mode_config_type, it is also same for the array
ath12k_hw_mode_pri_map.

When tested with new version firmware/board data which support new
hw mode eMLSR mode with hw mode value 8, it leads overflow usage for
array ath12k_hw_mode_pri_map in function ath12k_wmi_hw_mode_caps(),
and then lead preferred_hw_mode changed to 8, and finally function
ath12k_pull_mac_phy_cap_svc_ready_ext() select the capability of hw
mode 8, but the capability of eMLSR mode report from firmware does
not support 2.4 GHz band for WCN7850, so finally 2.4 GHz band is
disabled.

Skip the hw mode which exceeds WMI_HOST_HW_MODE_MAX in function
ath12k_wmi_hw_mode_caps() helps to avoid array overflow, then the 2.4
GHz band will not be disabled.

This is to keep compatibility with newer version firmware/board data
files, this change is still needed after ath12k add eMLSR hw mode 8 in
array ath12k_hw_mode_pri_map and enum wmi_host_hw_mode_config_type,
because more hw mode maybe added in next firmware/board data version
e.g hw mode 9, then it will also lead new array overflow without this
change.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230714072405.28705-1-quic_wgong@quicinc.com
2023-08-02 19:57:56 +03:00
Arnd Bergmann
603cf6c2fc wifi: ath12k: fix memcpy array overflow in ath12k_peer_assoc_h_he()
Two memory copies in this function copy from a short array into a longer one,
using the wrong size, which leads to an out-of-bounds access:

include/linux/fortify-string.h:592:4: error: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
                        __read_overflow2_field(q_size_field, size);
                        ^
include/linux/fortify-string.h:592:4: error: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
2 errors generated.

Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230703123737.3420464-1-arnd@kernel.org
2023-08-02 19:55:53 +03:00
Wen Gong
15c8441dc1 wifi: ath12k: correct the data_type from QMI_OPT_FLAG to QMI_UNSIGNED_1_BYTE for mlo_capable
Currently, the encoding rule for field mlo_capable in struct
qmi_wlanfw_host_cap_req_msg_v01 defined in array
qmi_wlanfw_host_cap_req_msg_v01_ei uses type QMI_OPT_FLAG.

Unfortunately, all ath12k firmware actually expects this field to be of
type NON QMI_OPT_FLAG such as QMI_UNSIGNED_1_BYTE/QMI_UNSIGNED_8_BYTE...
And as a result, firmware is unable to correctly decode the mlo_capable
field.

Change the ath12k definition as QMI_UNSIGNED_1_BYTE to match the firmware
definition so that firmware can correctly parse the mlo_capable info from
message QMI_WLANFW_HOST_CAP_REQ_V01 at wlan load time.

This is just an accidental typo and that both WCN7850 and QCN9274 firmwares
use QMI_UNSIGNED_1_BYTE.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230726093857.3610-1-quic_wgong@quicinc.com
2023-08-02 19:54:57 +03:00
Wen Gong
8ad314da54 wifi: ath12k: Fix a NULL pointer dereference in ath12k_mac_op_hw_scan()
In ath12k_mac_op_hw_scan(), the return value of kzalloc() is directly
used in memcpy(), which may lead to a NULL pointer dereference on
failure of kzalloc().

Fix this bug by adding a check of arg.extraie.ptr.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4

Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230726092625.3350-1-quic_wgong@quicinc.com
2023-08-02 19:54:18 +03:00
Seevalamuthu Mariappan
13329d0cb7 wifi: ath11k: Remove cal_done check during probe
In some race conditions, calibration done QMI message is received even
before host wait starts for calibration to be done.
Due to this, resetting firmware was not performed after calibration.

Hence, remove cal_done check in ath11k_qmi_fwreset_from_cold_boot()
as this is called only from probe.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: Seevalamuthu Mariappan <quic_seevalam@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230726141032.3061-4-quic_rajkbhag@quicinc.com
2023-08-02 19:49:39 +03:00
Anilkumar Kolli
bdfc967bf5 wifi: ath11k: Add coldboot calibration support for QCN9074
QCN9074 supports 6 GHz, which has increased number of channels
compared to 5 GHz/2 GHz. So, to support coldboot calibration in
QCN9074 ATH11K_COLD_BOOT_FW_RESET_DELAY extended to 60 seconds. To
avoid code redundancy, fwreset_from_cold_boot moved to QMI and made
common for both ahb and pci. Coldboot calibration is enabled only in
FTM mode for QCN9074. QCN9074 requires firmware restart after coldboot,
hence enable cbcal_restart_fw in hw_params.

This support can be enabled/disabled using hw params for different
hardware. Currently it is not enabled for QCA6390.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: Anilkumar Kolli <quic_akolli@quicinc.com>
Signed-off-by: Seevalamuthu Mariappan <quic_seevalam@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230726141032.3061-3-quic_rajkbhag@quicinc.com
2023-08-02 19:49:39 +03:00
Seevalamuthu Mariappan
011e5a3052 wifi: ath11k: Split coldboot calibration hw_param
QCN9074 enables coldboot calibration only in Factory Test Mode (FTM).
Hence, split cold_boot_calib to two hw_params for mission and FTM
mode.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

Signed-off-by: Seevalamuthu Mariappan <quic_seevalam@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230726141032.3061-2-quic_rajkbhag@quicinc.com
2023-08-02 19:49:38 +03:00
Colin Ian King
cc69c93bcb accel/qaic: remove redundant pointer pexec
Pointer pexec is being assigned a value however it is never read. The
assignment is redundant and can be removed. Replace sizeof(*pexec)
with sizeof the type and remove the declaration of pointer pexec.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230726140626.264952-1-colin.i.king@gmail.com
2023-08-02 09:14:18 -06:00
Christoph Hellwig
925c86a19b fs: add CONFIG_BUFFER_HEAD
Add a new config option that controls building the buffer_head code, and
select it from all file systems and stacking drivers that need it.

For the block device nodes and alternative iomap based buffered I/O path
is provided when buffer_head support is not enabled, and iomap needs a
a small tweak to define the IOMAP_F_BUFFER_HEAD flag to 0 to not call
into the buffer_head code when it doesn't exist.

Otherwise this is just Kconfig and ifdef changes.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230801172201.1923299-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-02 09:13:09 -06:00
Christoph Hellwig
487c607df7 block: use iomap for writes to block devices
Use iomap in buffer_head compat mode to write to block devices.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230801172201.1923299-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-02 09:13:09 -06:00
Christoph Hellwig
a05f7bd957 block: stop setting ->direct_IO
Direct I/O on block devices now nevers goes through aops->direct_IO.
Stop setting it and set the FMODE_CAN_ODIRECT in ->open instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230801172201.1923299-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-02 09:13:09 -06:00
Christoph Hellwig
727cfe9767 block: open code __generic_file_write_iter for blkdev writes
Open code __generic_file_write_iter to remove the indirect call into
->direct_IO and to prepare using the iomap based write code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20230801172201.1923299-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-02 09:13:09 -06:00
Christoph Hellwig
2ba39cc46b fs: rename and move block_page_mkwrite_return
block_page_mkwrite_return is neither block nor mkwrite specific, and
should not be under CONFIG_BLOCK.  Move it to mm.h and rename it to
vmf_fs_error.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230801172201.1923299-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-08-02 09:13:09 -06:00