- Rearranged defs order
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DPCD read is skipped first time after driver initialization.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following to align to linux coding style:
WARNING: braces {} are not necessary for any arm of this statement
WARNING: Missing a blank line after declarations
ERROR: space prohibited before that close parenthesis ')'
WARNING: unnecessary whitespace before a quoted newline
WARNING: %LX is non-standard C, use %llX
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In some vendor specific retimer setups for downstream 4-lane HBR3
configuration, the sink will show severe corruption (horizontal shifting)
and intermittent blanking.
[How]
Add new retimer programming sequence before clock recovery when 4 lanes
are active.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Last ODM slice could be slightly larger than other slice because it can be
including the residual.
[How]
Update DPG pattern programming sequence to use a different width for
last odm slice.
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
vstartup is calculated to be a large number. It works because
it is within vertical blank, but it reduces region of blank that
can be used for power gating.
[How]
Calculation needs to convert micro seconds to number of
vertical lines.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Reza Amini <reza.amini@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
DMUB may hang when powering down pixel clocks due to no dprefclk.
It is fixed by exiting idle optimization before the attempt to access PHY.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current recout calculation has a few assumptions and implementation
for MPO + ODM combine calculation is very specific. The equation has
too many cases without enough comments to document the detail.
[How]
The change remove the following assumptions:
1. When MPO is enabled, we only allow ODM Combine 2:1
2. ODM Combine always has even segment width.
3. Secondary MPO plane's pipe_ctx copies pre_odm_pipe from
its top pipe.
The change applies a generic formula with more details in comment to
document this solution so it is eaiser to learn and debug later.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Panels show corruption with high refresh rate timings when
ss is enabled.
[How]
Read down-spread percentage from lut to adjust dprefclk.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Martin Tsai <martin.tsai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
It is not valid to set the WDIVIDER value to 0, so do not
re-write to DISPCLK_WDIVIDER if the current value is 0
(i.e., it is at it's initial value and we have not made any
requests to change DISPCLK yet).
Reviewed-by: Saaem Rizvi <syedsaaem.rizvi@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Prevent ODM pipe connections between pipes that are not part
of the same plane when adding a plane to context
- Re-attach child pipes of ODM slice about to be disconnected
to prevent any lost pipes with invalid tops/bottoms
- We cannot split if head_pipe is not in ODM. Preventing this
avoids creating an invalid context with an invalid pipe.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ethan Bitnun <ethan.bitnun@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not all rings have scheduler associated. Only update scheduler data for
rings with scheduler. It could result in out of bound access as total
rings are more than those associated with particular IPs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch will enable VCN FW workaround using
DRM KEY INJECT WORKAROUND method,
which is helping in fixing the secure playback.
Signed-off-by: sguttula <Suresh.Guttula@amd.com>
Reviewed-by: Leo Liu <leo.liiu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[How & Why]
When determining default aux backlight level, read from
DPCD address 0x734 for VESA SCR on OLED.
Reviewed-by: Felipe Clark <felipe.clark@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Iswara Nagulendran <iswara.nagulendran@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Changed from pr_err/info to dev_* variants so that
we get better debug info when there are multiple GPUs
in the system.
Fixes: 09edeb4c16 ("drm/radeon: Prefer pr_err/_info over printk")
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Conform to Linux kernel coding style.
Fixes the following & other checks in radeon_encoders.c & radeon_gart.c:
WARNING: Missing a blank line after declarations
WARNING: Block comments use * on subsequent lines
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: braces {} are not necessary for single statement blocks
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the below checkpatch.pl warnings:
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
WARNING: suspect code indent for conditional statements (8, 12)
WARNING: braces {} are not necessary for single statement blocks
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following:
- WARNING: externs should be avoided in .c files
- ERROR: do not initialise globals to 0
- WARNING: Missing a blank line after declarations
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current yellow carp B0 PHYD32CLK logic is incorrectly applied to other
ASICs.
[How]
Add guard to check chip family is yellow carp before applying logic.
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
There are grammer mistakes in comments
[How]
Correct grammar mistakes
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Reza Amini <reza.amini@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return -ENOMEM, when there is no sufficient dynamically allocated memory
to create MQD backup for ring
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following to align to coding style:
WARNING: do not add new typedefs
+typedef struct FW_ATT_DB_HEADER
WARNING: do not add new typedefs
+typedef struct FW_ATT_RECORD
WARNING: Symbolic permissions 'S_IRUSR' are not preferred. Consider using octal permissions '0400'.
+ S_IRUSR,
ERROR: "(foo*)" should be "(foo *)"
WARNING: please, no space before tabs
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adhere to linux coding style
Fixes the following:
WARNING: Prefer IS_ENABLED(<FOO>) to CONFIG_<FOO> || CONFIG_<FOO>_MODULE
+#if defined(CONFIG_DRM_RADEON) || defined(CONFIG_DRM_RADEON_MODULE)
WARNING: Prefer IS_ENABLED(<FOO>) to CONFIG_<FOO> || CONFIG_<FOO>_MODULE
+#if defined(CONFIG_DRM_RADEON) || defined(CONFIG_DRM_RADEON_MODULE)
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MES can concurrently schedule queues on the device that require
exclusive device access if marked exclusively_scheduled without the
requirement of GWS. Similar to the F32 HWS, MES will manage
quality of service for these queues.
Use this for cooperative groups since cooperative groups are device
occupancy limited.
Since some GFX11 devices can only be debugged with partial CUs, do not
allow the debugging of cooperative groups on these devices as the CU
occupancy limit will change on attach.
In addition, zero initialize the MES add queue submission vector for MES
initialization tests as we do not want these to be cooperative
dispatches.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current SR-IOV will not set GC to off state, while it is a real
GC hard reset. Whthout GFX off flag, driver may do gfxhub invalidation
before firmware load and gfxhub gart enable. This operation may cause
CP to become busy because GC is not in the right state for invalidation.
[How]
Add a function for SR-IOV to clean up some sw state before recover. Set
adev->gfx.is_poweron to false to prevent gfxhub invalidation before gfx
firmware autoload complete.
Signed-off-by: Horace Chen <horace.chen@amd.com>
Reviewed-by: HaiJun Chang <HaiJun.Chang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Report current GFX clock also from average clock value as the original
CurrClock data is not valid/accurate any more as per FW team
Signed-off-by: Jane Jian <Jane.Jian@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reconcile devices.txt with serial/ucc_uart.c regarding device number
assignments. ucc_uart.c supports 4 ports and uses minor devnums
46-49, so update devices.txt with that info.
Then update ucc_uart.c's reference to the location of the devices.txt
list in the kernel source tree.
Fixes: d7584ed2b9 ("[POWERPC] qe-uart: add support for Freescale QUICCEngine UART")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Timur Tabi <timur@kernel.org>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: linux-serial@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/20230724063341.28198-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add mailing lists for linux-serial and lkml for the TTY layer. And let's
list the recently added files. This makes it easier for get_maintainer.pl
to include linux-serial for patches.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230721072334.59272-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The local 'flag' variable carries only TTY_NORMAL. So use that constant
directly and drop the variable.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230712081811.29004-10-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* move the declaration of flg (with the initializer) to the loop, so
there is no need to reset it to TTY_NORMAL by an 'else' branch.
* use TTY_NORMAL as initializer above, not a magic zero constant
* remove the outer 'if' from this construct:
if (S & (A | B)) {
if (S & A)
X;
if (S & B)
Y;
}
* drop unlikely() as I doubt it has any benefits here. If it does,
provide numbers.
All four make the code easier to read.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Vineet Gupta <vgupta@kernel.org>
Acked-by: Vineet Gupta <vgupta@kernel.org>
Link: https://lore.kernel.org/r/20230712081811.29004-9-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__uart_start() does not need a tty struct. It works only with
uart_state. So pass the latter directly.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230712081811.29004-8-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Both the character and flag are 8-bit values. So switch from unsigned
ints to u8s. The drivers will be cleaned up in the next round.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230712081811.29004-7-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Propagate u8 from the sysrq code further up to serial's
uart_handle_sysrq_char() and friends.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230712081811.29004-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using switch with range cases makes the code more aligned and readable.
Expand also that 36 as explicit addition of 10 + 26 to make the source
of the constant more obvious.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230712081811.29004-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Propagate u8 more from the bottom to the interface, so that sysrq
callers (usually drivers) see that u8 is expected.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230712081811.29004-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The passed parameter to sysrq handlers is a key (a character). So change
the type from 'int' to 'u8'. Let it specifically be 'u8' for two
reasons:
* unsigned: unsigned values come from the upper layers (devices) and the
tty layer assumes unsigned on most places, and
* 8-bit: as that what's supposed to be one day in all the layers built
on the top of tty. (Currently, we use mostly 'unsigned char' and
somewhere still only 'char'. (But that also translates to the former
thanks to -funsigned-char.))
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Zqiang <qiang.zhang1211@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de> # DRM
Acked-by: WANG Xuerui <git@xen0n.name> # loongarch
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20230712081811.29004-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'i' is a too generic name for something which carries a 'loglevel'. Name
it as such and make it 'u8', the same as key will become in the next
patches.
Note that we are not stripping any high bits away, 'key' is given only
8bit values.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230712081811.29004-2-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In many n_tty functions, the 'tty' parameter is used to either obtain
'ldata', or test the tty flags. So mark 'tty' in them const to make
obvious that it is only read.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230712064216.12150-5-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'tty' is not needed in canon_skip_eof(), so we can pass 'ldata' directly
instead.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230712064216.12150-4-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Make 'tty' parameter const as we only look at tty flags here.
* Make 'size' parameter of size_t type as everyone passes that and
memset() (the consumer) expects size_t too. So be consistent.
* Remove redundant local variables, place the content directly to the
'if'.
* Use 0 instead of 0x00 in memset(). The former is more obvious.
No functional changes expected.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230712064216.12150-3-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clang warns (or errors with CONFIG_WERROR=y):
drivers/input/keyboard/mcs_touchkey.c:149:49: error: variable 'error' is uninitialized when used here [-Werror,-Wuninitialized]
149 | dev_err(&client->dev, "i2c read error[%d]\n", error);
| ^~~~~
include/linux/dev_printk.h:144:65: note: expanded from macro 'dev_err'
144 | dev_printk_index_wrap(_dev_err, KERN_ERR, dev, dev_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~~~~~~
include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap'
110 | _p_func(dev, fmt, ##__VA_ARGS__); \
| ^~~~~~~~~~~
drivers/input/keyboard/mcs_touchkey.c:110:11: note: initialize the variable 'error' to silence this warning
110 | int error;
| ^
| = 0
1 error generated.
A refactoring updated the error handling in this block but did not
update the dev_err() call to use fw_ver instead of error. Do so now to
fix the warning and avoid printing uninitialized memory.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1893
Fixes: e175eae16c ("Input: mcs-touchkey - convert to use devm_* api")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230725-mcs_touchkey-fix-wuninitialized-v1-1-615db39af51c@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
commit b36ece8325 ("spi/mpc8xxx: refactor the common code for SPI/eSPI controller")
left mpc8xxx_spi_bufs() behind.
And since commit 3c5395b66f ("spi: fsl-(e)spi: simplify cleanup code")
mpc8xxx_spi_remove() is not used anymore.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230725135411.21152-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The :export: keyword makes sense only for C-files, where EXPORT_SYMBOL()
might appear. Otherwise kernel-doc may not produce anything out of this
file.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: f97fa3dcb2 ("lib/math: Move dvb_math.c into lib/math/int_log.c")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20230725104956.47806-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs42l51_of_match is only used in cs42l51-i2c.c now,
change it to static.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230725120917.513064-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>