Commit graph

1,215,304 commits

Author SHA1 Message Date
Simon Ser
1ca67aba8d drm/amd/display: only accept async flips for fast updates
Up until now, amdgpu was silently degrading to vsync when
user-space requested an async flip but the hardware didn't support
it.

The hardware doesn't support immediate flips when the update changes
the FB pitch, the DCC state, the rotation, enables or disables CRTCs
or planes, etc. This is reflected in the dm_crtc_state.update_type
field: UPDATE_TYPE_FAST means that immediate flip is supported.

Silently degrading async flips to vsync is not the expected behavior
from a uAPI point-of-view. Xorg expects async flips to fail if
unsupported, to be able to fall back to a blit. i915 already behaves
this way.

This patch aligns amdgpu with uAPI expectations and returns a failure
when an async flip is not possible.

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2023-07-18 14:21:02 -04:00
Guchun Chen
b42ae87a7b drm/amdgpu/vkms: relax timer deactivation by hrtimer_try_to_cancel
In below thousands of screen rotation loop tests with virtual display
enabled, a CPU hard lockup issue may happen, leading system to unresponsive
and crash.

do {
	xrandr --output Virtual --rotate inverted
	xrandr --output Virtual --rotate right
	xrandr --output Virtual --rotate left
	xrandr --output Virtual --rotate normal
} while (1);

NMI watchdog: Watchdog detected hard LOCKUP on cpu 1

? hrtimer_run_softirq+0x140/0x140
? store_vblank+0xe0/0xe0 [drm]
hrtimer_cancel+0x15/0x30
amdgpu_vkms_disable_vblank+0x15/0x30 [amdgpu]
drm_vblank_disable_and_save+0x185/0x1f0 [drm]
drm_crtc_vblank_off+0x159/0x4c0 [drm]
? record_print_text.cold+0x11/0x11
? wait_for_completion_timeout+0x232/0x280
? drm_crtc_wait_one_vblank+0x40/0x40 [drm]
? bit_wait_io_timeout+0xe0/0xe0
? wait_for_completion_interruptible+0x1d7/0x320
? mutex_unlock+0x81/0xd0
amdgpu_vkms_crtc_atomic_disable

It's caused by a stuck in lock dependency in such scenario on different
CPUs.

CPU1                                             CPU2
drm_crtc_vblank_off                              hrtimer_interrupt
    grab event_lock (irq disabled)                   __hrtimer_run_queues
        grab vbl_lock/vblank_time_block                  amdgpu_vkms_vblank_simulate
            amdgpu_vkms_disable_vblank                       drm_handle_vblank
                hrtimer_cancel                                         grab dev->event_lock

So CPU1 stucks in hrtimer_cancel as timer callback is running endless on
current clock base, as that timer queue on CPU2 has no chance to finish it
because of failing to hold the lock. So NMI watchdog will throw the errors
after its threshold, and all later CPUs are impacted/blocked.

So use hrtimer_try_to_cancel to fix this, as disable_vblank callback
does not need to wait the handler to finish. And also it's not necessary
to check the return value of hrtimer_try_to_cancel, because even if it's
-1 which means current timer callback is running, it will be reprogrammed
in hrtimer_start with calling enable_vblank to make it works.

v2: only re-arm timer when vblank is enabled (Christian) and add a Fixes
tag as well

v3: drop warn printing (Christian)

v4: drop superfluous check of blank->enabled in timer function, as it's
guaranteed in drm_handle_vblank (Christian)

Fixes: 84ec374bd5 ("drm/amdgpu: create amdgpu_vkms (v4)")
Cc: stable@vger.kernel.org
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 14:18:05 -04:00
Aurabindo Pillai
d1792509e1 drm/amd/display: add DCN301 specific logic for OTG programming
[Why&How]
DCN301 does not have FAMS hence the workaround needed on other DCN3x
variants related to OTG min/max selector programming is not applicable for it.
Hence isolate it and have it use the old sequence without workaround.

Fixes: 1598fc5764 ("drm/amd/display: Program OTG vtotal min/max selectors unconditionally for DCN1+")
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 14:17:35 -04:00
Aurabindo Pillai
2ed5a4c461 drm/amd/display: export some optc function for reuse
[Why&How]
Make a few functions non static so that they can be reused for other
asic. This is in preparation for separating out OTG programming sequence
for DCN301

Fixes: 1598fc5764 ("drm/amd/display: Program OTG vtotal min/max selectors unconditionally for DCN1+")
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 14:17:11 -04:00
Mario Limonciello
60a2dae490 drm/amd: Use amdgpu_device_pcie_dynamic_switching_supported() for SMU7
SMU7 does a check if the dGPU is inserted into a Rocket Lake system,
to turn off DPM.  Extend this check to all systems that have problems
with dynamic switching by using the
amdgpu_device_pcie_dynamic_switching_supported() helper.

Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 14:16:38 -04:00
Breno Leitao
91019b5bc7 cxl/acpi: Return 'rc' instead of '0' in cxl_parse_cfmws()
Driver initialization returned success (return 0) even if the
initialization (cxl_decoder_add() or acpi_table_parse_cedt()) failed.

Return the error instead of swallowing it.

Fixes: f4ce1f766f ("cxl/acpi: Convert CFMWS parsing to ACPI sub-table helpers")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20230714093146.2253438-2-leitao@debian.org
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2023-07-18 11:55:09 -06:00
Breno Leitao
4cf67d3cc9 cxl/acpi: Fix a use-after-free in cxl_parse_cfmws()
KASAN and KFENCE detected an user-after-free in the CXL driver. This
happens in the cxl_decoder_add() fail path. KASAN prints the following
error:

   BUG: KASAN: slab-use-after-free in cxl_parse_cfmws (drivers/cxl/acpi.c:299)

This happens in cxl_parse_cfmws(), where put_device() is called,
releasing cxld, which is accessed later.

Use the local variables in the dev_err() instead of pointing to the
released memory. Since the dev_err() is printing a resource, change the open
coded print format to use the %pr format specifier.

Fixes: e50fe01e1f ("cxl/core: Drop ->platform_res attribute for root decoders")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20230714093146.2253438-1-leitao@debian.org
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2023-07-18 11:55:02 -06:00
Tudor Ambarus
d4996700ab
mtd: spi-nor: rename method for enabling or disabling octal DTR
Having an *_enable(..., bool enable) definition was misleading
as the method is used both to enable and to disable the octal DTR
mode. Splitting the method in the core in two, one to enable and
another to disable the octal DTR mode does not make sense as the
method is straight forward and we'd introduce code duplication.

Update the core to use:
int (*set_octal_dtr)(struct spi_nor *nor, bool enable);

Manufacturer drivers use different sequences of commands to enable
and disable the octal DTR mode, thus for clarity they shall
implement it as:
static int manufacturer_snor_set_octal_dtr(struct spi_nor *nor, bool enable)
{
	return enable ? manufacturer_snor_octal_dtr_enable() :
			manufacturer_snor_octal_dtr_disable();
}

Reviewed-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20230714150757.15372-1-tudor.ambarus@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2023-07-18 20:40:51 +03:00
Linus Walleij
83e824a4a5
mtd: spi-nor: Correct flags for Winbond w25q128
The Winbond "w25q128" (actual vendor name W25Q128JV) has
exactly the same flags as the sibling device "w25q128jv".
The devices both require unlocking to enable write access.

The actual product naming between devices vs the Linux
strings in winbond.c:

0xef4018: "w25q128"   W25Q128JV-IN/IQ/JQ
0xef7018: "w25q128jv" W25Q128JV-IM/JM

The latter device, "w25q128jv" supports features named DTQ
and QPI, otherwise it is the same.

Not having the right flags has the annoying side effect
that write access does not work.

After this patch I can write to the flash on the Inteno
XG6846 router.

The flash memory also supports dual and quad SPI modes.
This does not currently manifest, but by turning on SFDP
parsing, the right SPI modes are emitted in
/sys/kernel/debug/spi-nor/spi1.0/capabilities
for this chip, so we also turn on this.

Since we now have determined that SFDP parsing works on
the device, we also detect the geometry using SFDP.

After this dmesg and sysfs says:
[    1.062401] spi-nor spi1.0: w25q128 (16384 Kbytes)
cat erasesize
65536
(16384*1024)/65536 = 256 sectors

spi-nor sysfs:
cat jedec_id
ef4018
cat manufacturer
winbond
cat partname
w25q128
hexdump -v -C sfdp
00000000  53 46 44 50 05 01 00 ff  00 05 01 10 80 00 00 ff
00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000020  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000030  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000040  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000050  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000060  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000070  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff
00000080  e5 20 f9 ff ff ff ff 07  44 eb 08 6b 08 3b 42 bb
00000090  fe ff ff ff ff ff 00 00  ff ff 40 eb 0c 20 0f 52
000000a0  10 d8 00 00 36 02 a6 00  82 ea 14 c9 e9 63 76 33
000000b0  7a 75 7a 75 f7 a2 d5 5c  19 f7 4d ff e9 30 f8 80

Cc: stable@vger.kernel.org
Suggested-by: Michael Walle <michael@walle.cc>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230718-spi-nor-winbond-w25q128-v5-1-a73653ee46c3@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2023-07-18 20:39:20 +03:00
Bjorn Andersson
d629e5bcdf rpmsg: glink: Avoid dereferencing NULL channel
The newly introduced signal command handler checks for non-existing
channel and print an error message, but then continues on to dereference
that same channel.

Instead abort the handler when no channel is found.

Fixes: a2b73aa512 ("rpmsg: glink: Add support to handle signals command")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202307160800.sb7gMnL6-lkp@intel.com/
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Link: https://lore.kernel.org/r/20230717165538.1542034-1-quic_bjorande@quicinc.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
2023-07-18 10:12:26 -06:00
Linus Torvalds
74f1456c4a linux-kselftest-fixes-6.5-rc3
This Kselftest fixes update for Linux 6.5-rc3 consists of fixes to
 bugs that are interfering with arm64 and risc workflows. This update
 also includes two fixes to timer and mincore tests that are causing
 test failures.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmS2qwsACgkQCwJExA0N
 Qxxk1g//Xe6yQnKYz5OVGZmWOoXn6VbOfnHiZMuTnIIJ25p1uWVbVBws6TX10DTB
 U/qgqcobs7vTkKywRhfVVnWWK1AIvPsYx7Cuy9bhqPaEfiv3U9KHauZZ42j8rVOW
 piDCgAKpobwBxE8279zxajPndEWPC7TbugDHPig7gRF0Y+kmU9i6n1sUymegKcVy
 lDQwsWG5brseb1HEs5S+3HJeV2VXfmjOleqwWqUVT+8xoKeTKteaWpkEkdbZP1Xb
 P8nn15/sMyWMRtZHgHmG8oR53SX4/6DMWAwL5ZXnOV240Wi4IBl8DnBQQpytrcK4
 YIbUNgRbrYQs7YQRYUdejlX2n2KwRBZB6If2kNF4WxZBW63JB1CftnAzbqhHLqwO
 8V83PAsK9bMuwPRUUI5ZHaVp7k54VszMHP1MwkbJDAilFPeYqdKR4XJT+KZ23k1F
 nXdqpbadTBIvmurEOR/lKPvWMr/FFIlUAhsG4YELYfiIIUVy7bCeA6Q/bVaclqnp
 jdkKSUbpe3rpwmhHxD+vpZP8EAFaljEMih+z9ollEd2/d1h64Ul4UyVScyZLr06M
 aGoblt7C0iE7sZUek+6Zfi+bxDyx/6EKtFUKrHw2iHMc7QpEu/z8PTviMz9KbOcw
 uoLthFkv1QUJtSzusAEGGncNc5cPEXG7WsWW5YjDmhoof5P1Z78=
 =IBin
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-fixes-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:
 "Fixes to bugs that are interfering with arm64 and risc workflows. Also
  two fixes to timer and mincore tests that are causing test failures"

* tag 'linux-kselftest-fixes-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/arm64: fix build failure during the "emit_tests" step
  selftests/riscv: fix potential build failure during the "emit_tests" step
  tools: timers: fix freq average calculation
  selftests/mincore: fix skip condition for check_huge_pages test
2023-07-18 08:56:02 -07:00
Linus Torvalds
f2f393c385 Hi Linus,
This the trimmed down version of the previous pull request.
 
 BR, Jarkko
 -----BEGIN PGP SIGNATURE-----
 
 iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCZLW0JxIcamFya2tvQGtl
 cm5lbC5vcmcACgkQGnq6IXRrq9JawQEAihoRREYBYq+SjsQgn75Nj1PAsqP4FSAy
 7/Oy4s54j/MA/0j6bcyfC8rqUk/m2o4A1ssNJ2dnEYYV6Z5sKXNpDDoI
 =qhda
 -----END PGP SIGNATURE-----

Merge tag 'tpmdd-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd

Pull tpm fixes from Jarkko Sakkinen.

Mostly interrupt storm fixes, with some other minor changes.

* tag 'tpmdd-v6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm,tpm_tis: Disable interrupts after 1000 unhandled IRQs
  tpm/tpm_tis: Disable interrupts for Lenovo L590 devices
  tpm: Do not remap from ACPI resources again for Pluton TPM
  tpm/tpm_tis: Disable interrupts for Framework Laptop Intel 13th gen
  tpm/tpm_tis: Disable interrupts for Framework Laptop Intel 12th gen
  security: keys: Modify mismatched function name
  tpm: return false from tpm_amd_is_rng_defective on non-x86 platforms
  keys: Fix linking a duplicate key to a keyring's assoc_array
  tpm: tis_i2c: Limit write bursts to I2C_SMBUS_BLOCK_MAX (32) bytes
  tpm: tis_i2c: Limit read bursts to I2C_SMBUS_BLOCK_MAX (32) bytes
  tpm_tis_spi: Release chip select when flow control fails
  tpm: tpm_tis: Disable interrupts *only* for AEON UPX-i11
  tpm: tpm_vtpm_proxy: fix a race condition in /dev/vtpmx creation
2023-07-18 08:43:35 -07:00
Trond Myklebust
f75546f58a nfsd: Remove incorrect check in nfsd4_validate_stateid
If the client is calling TEST_STATEID, then it is because some event
occurred that requires it to check all the stateids for validity and
call FREE_STATEID on the ones that have been revoked. In this case,
either the stateid exists in the list of stateids associated with that
nfs4_client, in which case it should be tested, or it does not. There
are no additional conditions to be considered.

Reported-by: "Frank Ch. Eigler" <fche@redhat.com>
Fixes: 7df302f75e ("NFSD: TEST_STATEID should not return NFS4ERR_STALE_STATEID")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-07-18 11:34:09 -04:00
Guchun Chen
18cf073faa drm/amdgpu: use a macro to define no xcp partition case
~0 as no xcp partition is used in several places, so improve its
definition by a macro for code consistency.

Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:19:02 -04:00
Guchun Chen
e379b5e7dc drm/amdgpu/vm: use the same xcp_id from root PD
Other PDs/PTs allocation should just use the same xcp_id as that
stored in root PD.

Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:18:53 -04:00
Guchun Chen
5003ca63bc drm/amdgpu: fix slab-out-of-bounds issue in amdgpu_vm_pt_create
Recent code set xcp_id stored from file private data when opening
device to amdgpu bo for accounting memory usage etc, but not all
VMs are attached to this fpriv structure like the vm cases in
amdgpu_mes_self_test, otherwise, KASAN will complain below out
of bound access. And more importantly, VM code should not touch
fpriv structure, so drop fpriv code handling from amdgpu_vm_pt.

[   77.292314] BUG: KASAN: slab-out-of-bounds in amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[   77.293845] Read of size 4 at addr ffff888102c48a48 by task modprobe/1069
[   77.294146] Call Trace:
[   77.294178]  <TASK>
[   77.294208]  dump_stack_lvl+0x49/0x63
[   77.294260]  print_report+0x16f/0x4a6
[   77.294307]  ? amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[   77.295979]  ? kasan_complete_mode_report_info+0x3c/0x200
[   77.296057]  ? amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[   77.297556]  kasan_report+0xb4/0x130
[   77.297609]  ? amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[   77.299202]  __asan_load4+0x6f/0x90
[   77.299272]  amdgpu_vm_pt_create+0x17e/0x4b0 [amdgpu]
[   77.300796]  ? amdgpu_init+0x6e/0x1000 [amdgpu]
[   77.302222]  ? amdgpu_vm_pt_clear+0x750/0x750 [amdgpu]
[   77.303721]  ? preempt_count_sub+0x18/0xc0
[   77.303786]  amdgpu_vm_init+0x39e/0x870 [amdgpu]
[   77.305186]  ? amdgpu_vm_wait_idle+0x90/0x90 [amdgpu]
[   77.306683]  ? kasan_set_track+0x25/0x30
[   77.306737]  ? kasan_save_alloc_info+0x1b/0x30
[   77.306795]  ? __kasan_kmalloc+0x87/0xa0
[   77.306852]  amdgpu_mes_self_test+0x169/0x620 [amdgpu]

v2: without specifying xcp partition for PD/PT bo, the xcp id is -1.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2686
Fixes: 3ebfd221c1 ("drm/amdkfd: Store xcp partition id to amdgpu bo")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:18:16 -04:00
Guchun Chen
50e633081e drm/amdgpu: Allocate root PD on correct partition
file_priv needs to be setup firstly, otherwise, root PD
will always be allocated on partition 0, even if opening
the device from other partitions.

Fixes: 3ebfd221c1 ("drm/amdkfd: Store xcp partition id to amdgpu bo")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:16:48 -04:00
Victor Lu
8ed49dd1d3 drm/amdgpu: Add RLCG interface driver implementation for gfx v9.4.3 (v3)
Add RLCG interface support for gfx v9.4.3 and multiple XCCs.
Do not enable it yet.

v2: Fix amdgpu_rlcg_reg_access_ctrl init, add support for multiple XCCs
    in amdgpu_mm_wreg_mmio_rlc

v3: Use GET_INST() when indexing amdgpu_rlcg_reg_access_ctrl

Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:16:41 -04:00
Aric Cyr
4a8e0f9558 drm/amd/display: Promote DAL to 3.2.243
This version brings along following fixes:
- Update 128b/132b downspread factor to 0.3%
- Add helpers to get DMUB FW boot options
- Initialize necessary uninitialized variables
- Add stream overhead in BW calculations for 128b/132b
- Add link encoding to timing BW calculation parameters
- Prevent vtotal from being set to 0
- Fix race condition when turning off an output alone
- Keep PHY active for DP displays on DCN31
- Fix ASIC check in aux timeout workaround
- ABM pause toggle
- Add missing triggers for full updates
- Disable MPC split by default on special asic
- Add additional refresh rate conditions for SubVP cases
- Fix DP2 link training failure with RCO
- Reenable all root clock gating options
- Cache backlight_millinits in link structure and setting brightness accordingly
- Refine to decide the verified link setting
- Update SW cursor fallback for subvp high refresh

Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:16:35 -04:00
Alvin Lee
157f75a79a drm/amd/display: Add missing triggers for full updates
[Description]
- Full update was missed for the following cases:
	- Idle optimization is enabled
	- Plane is not in current context
- Also don't clear surface updates at end of
  commit_plane_for_stream_fast as they are cleared at
  the beginning of each flip (only stream updates need
  to be cleared in case there is no stream update in
  the next flip)

Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:16:28 -04:00
Reza Amini
da915efaa2 drm/amd/display: ABM pause toggle
[why]
Allow ABM states to be transferred across display
adapters for smooth display transitions.

[how]
We call DMUB to pause and get ABM states. We
transfer data to other gpu, and deliver data and
ask ABM to un-pause.

Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Reza Amini <reza.amini@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:16:23 -04:00
Taimur Hassan
085f7bd955 drm/amd/display: Fix ASIC check in aux timeout workaround
[Why]
Aux write was meant to be ASIC specific, and is
causing compliance failures on newer parts.

[How]
Make workaround specific to single ASIC.

Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:16:17 -04:00
Nicholas Kazlauskas
9c553d00c5 drm/amd/display: Keep PHY active for DP displays on DCN31
[Why & How]
Port of a change that went into DCN314 to keep the PHY enabled
when we have a connected and active DP display.

The PHY can hang if PHY refclk is disabled inadvertently.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Josip Pavic <josip.pavic@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:16:09 -04:00
Daniel Miess
250a636a3f drm/amd/display: Prevent vtotal from being set to 0
[Why]
In dcn314 DML the destination pipe vtotal was being set
to the crtc adjustment vtotal_min value even in cases
where that value is 0.

[How]
Only set vtotal to the crtc adjustment vtotal_min value
in cases where the value is non-zero.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:15:57 -04:00
George Shen
63c0bf99c1 drm/amd/display: Add link encoding to timing BW calculation parameters
[Why]
There certain cases where the timing BW is dependent on the type of link
encoding in use. Thus to calculate the correct BW required for a given
timing, the link encoding should be added as a parameter.

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:15:51 -04:00
George Shen
9747641808 drm/amd/display: Add stream overhead in BW calculations for 128b/132b
[Why]
Current BW calculations do not account for the additional padding added
for uncompressed pixel-to-symbol packing.

This results in X.Y being too low for 128b/132b SST streams in certain
scenarios. If X.Y is too low, end user can observe image corruption.

[How]
Add function to calculate stream overhead to timing BW calculation for
128b/132b SST cases.

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:15:45 -04:00
Meera Patel
3999edf8ba drm/amd/display: Initialize necessary uninitialized variables
This commit initializes uninitialized variables.
For some compilers uninitialized variable warnings are treated as Error.

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Meera Patel <meera.patel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:15:38 -04:00
Cruise Hung
6c3162d03b drm/amd/display: Add helpers to get DMUB FW boot options
[Why & How]
To query the bits and print them out for debug purposes.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Cruise Hung <cruise.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:15:32 -04:00
Aric Cyr
65e9d632e3 drm/amd/display: Promote DAL to 3.2.242
This version brings along following fixes:
- Setup stream encoder before link enable for TMDS
- Use is_dig_enable function instead of dcn10 hardcode
- Re-add aux intercept disable delay generically for 2+ LTTPRs
- Add polling method to handle MST reply packet
- Remove unused function
- Improve the include of header file
- Add missing static
- Hardcode vco_freq for dcn316
- Reduce stack size
- Skip enabling DMCUB when using emulation
- Check TG is non-null before checking if enabled
- Update scaler recout data for visual confirm
- Skip querying caps when DMCUB emulation is in use

Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:15:26 -04:00
Zhikai Zhai
dfa7a18303 drm/amd/display: Disable MPC split by default on special asic
[WHY]
All of pipes will be used when the MPC split enable on the dcn
which just has 2 pipes. Then MPO enter will trigger the minimal
transition which need programe dcn from 2 pipes MPC split to 2
pipes MPO. This action will cause lag if happen frequently.

[HOW]
Disable the MPC split for the platform which dcn resource is limited

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:15:11 -04:00
Christoffer Sandberg
c250ef8954 ALSA: hda/realtek: Add quirk for Clevo NS70AU
Fixes headset detection on Clevo NS70AU.

Co-developed-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230718145722.10592-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-07-18 17:15:10 +02:00
George Shen
b97089b88c drm/amd/display: Update 128b/132b downspread factor to 0.3%
[Why]
Updating downspread factor to 0.3% to add additional margin to account
for potential link rate deviations (up to 300ppm as per the DP spec).

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:15:05 -04:00
Alan Liu
fff7b95a50 drm/amd/display: Fix race condition when turning off an output alone
[Why]
When 2 threads are doing commit_tail parallelly, one thread could
commit new streams to dc state but another thread remove it from dc
right away.

[How]
If we don't have new dm state change from commit_check, then we should
not call dc_commit_streams() in commit_tail. A new function
amdgpu_dm_commit_streams() is introduced to refator dc_commit_stream()
adjacent code and fix this issue.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Alan Liu <haoping.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:14:56 -04:00
Samson Tam
c4ba2b50f2 drm/amd/display: add additional refresh rate conditions for SubVP cases
[Why]
Want to further constrain these refresh rate conditions for SubVP:
- SubVP + SubVP: either both <= 120Hz or both between 120-165Hz
- SubVP + DRR: SubVP <= 120Hz
- SubVP + VBlank: SubVP <= 120Hz

[How]
Add constraints in subvp_subvp_admissable(),
dcn32_subvp_drr_admissable() and dcn32_subvp_vblank_admissable()

Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:14:50 -04:00
Zhikai Zhai
c99fcb02bc drm/amd/display: refine to decide the verified link setting
[WHY]
We return false by default when link training fail at link loss.
It will cause we get a fail verified link caps directly.

[HOW]
Record the highest verified link caps. Use the recorded value as
the verified link caps if it is not successful in the last attempt
to avoid to use the lowest link setting.

Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:14:44 -04:00
Daniel Miess
3a87e25aaa drm/amd/display: Fix DP2 link training failure with RCO
[Why]
When RCO is enabled for symclk32_le we get failures during
DP2 link traing compliance tests.

[How]
Break out symclk32_le RCO into a separate function that is
called for hpo when link is enabled/disabled.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:14:36 -04:00
Nicholas Susanto
2ad127ba4c drm/amd/display: Cache backlight_millinits in link structure and setting brightness accordingly
[Why]
Need to save the cached backlight level so that display lights up using
appropriate brightness level instead of the default brightness when
waking up from s0i3.

[How]
Adding a backlight level cache in link structure. Also instead on
calling set_default_brightness_aux, check if cached values exists.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:14:30 -04:00
Daniel Miess
6d435a2e86 drm/amd/display: Reenable all root clock gating options
[Why & How]
Re-enable all RCO options now that all known issues with
RCO have been addressed

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:14:22 -04:00
Alvin Lee
cedac798fd drm/amd/display: Update SW cursor fallback for subvp high refresh
[Description]
Since SubVP high refresh is now enabled, we must
fallback to SW cursor under if we're in a SubVP
high refresh config

Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:14:15 -04:00
Nicholas Kazlauskas
a243e38e69 drm/amd/display: Skip querying caps when DMCUB emulation is in use
[Why]
Workaround to avoid accessing DMCUB state too early if the emulator
is in use - we don't support any of the features the caps are querying
with emulation anyway.

[How]
Guard the query if emulation is in use.

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:14:08 -04:00
Leo Ma
bf27f5defe drm/amd/display: Update scaler recout data for visual confirm
[Why]
Visual confirm color is not as expected for Autoa Color Management
feature test.

[How]
Calculate scaler recout data when visual confirm enabled to update
the visual confirm bar on the display.

Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:14:02 -04:00
Taimur Hassan
ab02d4ae4a drm/amd/display: check TG is non-null before checking if enabled
[Why & How]
If there is no TG allocation we can dereference a NULL pointer when
checking if the TG is enabled.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:13:55 -04:00
Taimur Hassan
e198a746fc drm/amd/display: Skip enabling DMCUB when using emulation
[Why & How]
Shouldn't be touching path for HW DMCUB when emulating.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Taimur Hassan <syed.hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:13:49 -04:00
Rodrigo Siqueira
135fd1b356 drm/amd/display: Reduce stack size
Reduce stack size pointed by clang:

amdgpu_dm/amdgpu_dm.c:8655:13: error: stack frame size (1048) exceeds limit (1024) in 'amdgpu_dm_atomic_commit_tail' [-Werror,-Wframe-larger-than]

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:13:42 -04:00
Alan Liu
30e9b7cb9c drm/amd/display: Hardcode vco_freq for dcn316
There is no need to calculate the VCO frequency. In our internal branch
we've hard-coded this for a while, so it's well-tested. This also allows
us to remove the now unused code for calculating the VCO frequency.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Alan Liu <haoping.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:13:36 -04:00
Rodrigo Siqueira
6f2bde9b0f drm/amd/display: Add missing static
After enable DRM_AMDGPU_WERROR, clang highlight multiple functions that
need to have `static`, and this commit address those issues and also
improve the indents.

Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:13:30 -04:00
Rodrigo Siqueira
c324065cd4 drm/amd/display: Remove unused function
The get_engine_type is never used in the code, for this reason, this
commit drops this function.

Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:13:23 -04:00
Rodrigo Siqueira
c2de8bc9da drm/amd/display: Improve the include of header file
This commit improves the include of some header files to make them align
with other includes.

Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:13:08 -04:00
Wayne Lin
bb4fa525f3 drm/amd/display: Add polling method to handle MST reply packet
[Why]
Specific TBT4 dock doesn't send out short HPD to notify source
that IRQ event DOWN_REP_MSG_RDY is set. Which violates the spec
and cause source can't send out streams to mst sinks.

[How]
To cover this misbehavior, add an additional polling method to detect
DOWN_REP_MSG_RDY is set. HPD driven handling method is still kept.
Just hook up our handler to drm mgr->cbs->poll_hpd_irq().

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:12:50 -04:00
Michael Strauss
c4e532f753 drm/amd/display: Re-add aux intercept disable delay generically for 2+ LTTPRs
[WHY]
Issue not display generic, required for multiple 2+ LTTPR link configurations.

[HOW]
Revert monitor patch change and remove delay for single LTTPR case

Reviewed-by: George Shen <george.shen@amd.com>
Acked-by: Alan Liu <haoping.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-07-18 11:12:42 -04:00