Empty BUGS and TODO sections don't really help anyone, so remove them.
Version information is chronically outdated, and not really useful in a
git world anyway, so remove it as well.
Also remove duplicated (and outdated, of course) status section from
p16v.h (the one in p16v.c is in better shape).
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230715160839.326978-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Given that the filter is already set to neutral for PCM voices, the
only observable effect is that the Z1/Z2/FXBUS registers don't have a
stray bit set for negative numbers anymore. The bit is below the ones
significant for output, but it would mess with 32-bit sample
recombination, which we intend to add.
kX-project does that, but I had to figure out myself why.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230715160802.326872-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Got kmemleak errors with the following ltp can_filter testcase:
for ((i=1; i<=100; i++))
do
./can_filter &
sleep 0.1
done
==============================================================
[<00000000db4a4943>] can_rx_register+0x147/0x360 [can]
[<00000000a289549d>] raw_setsockopt+0x5ef/0x853 [can_raw]
[<000000006d3d9ebd>] __sys_setsockopt+0x173/0x2c0
[<00000000407dbfec>] __x64_sys_setsockopt+0x61/0x70
[<00000000fd468496>] do_syscall_64+0x33/0x40
[<00000000b7e47d51>] entry_SYSCALL_64_after_hwframe+0x61/0xc6
It's a bug in the concurrent scenario of unregister_netdevice_many()
and raw_release() as following:
cpu0 cpu1
unregister_netdevice_many(can_dev)
unlist_netdevice(can_dev) // dev_get_by_index() return NULL after this
net_set_todo(can_dev)
raw_release(can_socket)
dev = dev_get_by_index(, ro->ifindex); // dev == NULL
if (dev) { // receivers in dev_rcv_lists not free because dev is NULL
raw_disable_allfilters(, dev, );
dev_put(dev);
}
...
ro->bound = 0;
...
call_netdevice_notifiers(NETDEV_UNREGISTER, )
raw_notify(, NETDEV_UNREGISTER, )
if (ro->bound) // invalid because ro->bound has been set 0
raw_disable_allfilters(, dev, ); // receivers in dev_rcv_lists will never be freed
Add a net_device pointer member in struct raw_sock to record bound
can_dev, and use rtnl_lock to serialize raw_socket members between
raw_bind(), raw_release(), raw_setsockopt() and raw_notify(). Use
ro->dev to decide whether to free receivers in dev_rcv_lists.
Fixes: 8d0caedb75 ("can: bcm/raw/isotp: use per module netdevice notifier")
Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Link: https://lore.kernel.org/all/20230711011737.1969582-1-william.xuanziyang@huawei.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
85;95;0c
This uses IRQs to track spontaneous changes to the word clock source
register.
FWIW, that this can happen in the first place is the reason why it is
futile to lock the clock source mixer setting while the device is open -
we can't consistently control the rate anyway. Though arguably, we
should reset any open streams when that happens, as they become
corrupted anyway.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230715160738.326832-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Referenced commit missed that for chip versions 42 and 43 ASPM
remained disabled in the respective rtl_hw_start_...() routines.
This resulted in problems as described in the referenced bug
ticket. Therefore re-instantiate the previous logic.
Fixes: 5fc3f6c90c ("r8169: consolidate disabling ASPM before EPHY access")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217635
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The KSZ8795 driver code was modified to use on KSZ8863/73, which has
different register definitions. Some of the new KSZ8795 register
information are wrong compared to previous code.
KSZ8795 also behaves differently in that the STATIC_MAC_TABLE_USE_FID
and STATIC_MAC_TABLE_FID bits are off by 1 when doing MAC table reading
than writing. To compensate that a special code was added to shift the
register value by 1 before applying those bits. This is wrong when the
code is running on KSZ8863, so this special code is only executed when
KSZ8795 is detected.
Fixes: 4b20a07e10 ("net: dsa: microchip: ksz8795: add support for ksz88xx chips")
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174946.4063995-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Justin Chen says:
====================
Brcm ASP 2.0 Ethernet Controller
Add support for the Broadcom ASP 2.0 Ethernet controller which is first
introduced with 72165.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add maintainers entry for ASP 2.0 Ethernet driver.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
74165 is a 16nm process SoC with a 10/100 integrated Ethernet PHY,
utilize the recently defined 16nm EPHY macro to configure that PHY.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add mdio compat string for ASP 2.0 ethernet driver.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for ethernet driver specific stats.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for eth_mac_stats, rmon_stats, and eth_ctrl_stats.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for wake on network filters. The max match is 256 bytes.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for Wake-On-Lan magic packet and magic packet with password.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the Broadcom ASP 2.0 Ethernet controller which is first
introduced with 72165. This controller features two distinct Ethernet
ports that can be independently operated.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a binding document for the Broadcom ASP 2.0 Ethernet
controller.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ASP 2.0 Ethernet controller uses a brcm unimac.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Victor Nogueira says:
====================
net: sched: Fixes for classifiers
Four different classifiers (bpf, u32, matchall, and flower) are
calling tcf_bind_filter in their callbacks, but arent't undoing it by
calling tcf_unbind_filter if their was an error after binding.
This patch set fixes all this by calling tcf_unbind_filter in such
cases.
This set also undoes a refcount decrement in cls_u32 when an update
fails under specific conditions which are described in patch #3.
v1 -> v2:
* Remove blank line after fixes tag
* Fix reverse xmas tree issues pointed out by Simon
v2 -> v3:
* Inline functions cls_bpf_set_parms and fl_set_parms to avoid adding
yet another parameter (and a return value at it) to them.
* Remove similar fixes for u32 and matchall, which will be sent soon,
once we find a way to do the fixes without adding a return parameter
to their set_parms functions.
v3 -> v4:
* Inline mall_set_parms to avoid adding yet another parameter.
* Remove set_flags parameter from u32_set_parms and create a separate
function for calling tcf_bind_filter and tcf_unbind_filter in case of
failure.
* Change cover letter title to also encompass refcnt fix for u32
v4 -> v5:
* Change back tag to net
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If TCA_FLOWER_CLASSID is specified in the netlink message, the code will
call tcf_bind_filter. However, if any error occurs after that, the code
should undo this by calling tcf_unbind_filter.
Fixes: 77b9900ef5 ("tc: introduce Flower classifier")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If cls_bpf_offload errors out, we must also undo tcf_bind_filter that
was done before the error.
Fix that by calling tcf_unbind_filter in errout_parms.
Fixes: eadb41489f ("net: cls_bpf: add support for marking filters as hardware-only")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the case of an update, when TCA_U32_LINK is set, u32_set_parms will
decrement the refcount of the ht_down (struct tc_u_hnode) pointer
present in the older u32 filter which we are replacing. However, if
u32_replace_hw_knode errors out, the update command fails and that
ht_down pointer continues decremented. To fix that, when
u32_replace_hw_knode fails, check if ht_down's refcount was decremented
and undo the decrement.
Fixes: d34e3e1813 ("net: cls_u32: Add support for skip-sw flag to tc u32 classifier.")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When u32_replace_hw_knode fails, we need to undo the tcf_bind_filter
operation done at u32_set_parms.
Fixes: d34e3e1813 ("net: cls_u32: Add support for skip-sw flag to tc u32 classifier.")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case an error occurred after mall_set_parms executed successfully, we
must undo the tcf_bind_filter call it issues.
Fix that by calling tcf_unbind_filter in err_replace_hw_filter label.
Fixes: ec2507d2a3 ("net/sched: cls_matchall: Fix error path")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename local `struct fec_enet_private *adapter` to `fep` in `fec_ptp_gettime()` to match the rest of the driver
Signed-off-by: Csókás Bence <csokas.bence@prolan.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for drivers/phy/phy-can-transceiver.c
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20230714174841.4061919-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174023.4039938-1-robh@kernel.org
Signed-off-by: Michal Simek <michal.simek@amd.com>
A lot of fixes here for the Qualcomm CODEC drivers, there was quite a
bit of fragility with the SoundWire probe due to the combined DT and
hotplug approach that the bus has which Johan Hovold fixed along with a
bunch of other issues that came up in the process. Srivinvas Kandagatla
also fixed some separate issues that have been lurking for a while in
the Qualcomm AP side, and there's a good set of AMD fixes from Vijendar
Mukunda too.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmS0S+wACgkQJNaLcl1U
h9C/rwf7BgS6oDJUY3dbr+JkCb0ZFnDR583htibhJTG98hSzBDvTRPAeEa4yhzed
MDkrW4S02EezRRtfyHwx4oLeyiarl6KOd2Rth+49nsF1uVzpTyyvcds/B7k38X0Y
mOeO0PDfGxnSZa7kP7EQaQKXsKpA9jAInojRO1ontPpU2GKgB/+JduZ4LS6IqTGs
bRQmAmeHeJcLSVJ83doVlseCvFTj3YUmhRscnxPDiwFdR7le07g8eV1iMex0Q9fr
YQBAmZNtCZNntP/Wn0XF7fnvSu9MioMw4vymJsPElvSupOj4YGNnFUdO6JXRp5pH
ZUlVji17AQ+VmNxi5BlHwX8XvJM8Vg==
=kznt
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.5-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.5
A lot of fixes here for the Qualcomm CODEC drivers, there was quite a
bit of fragility with the SoundWire probe due to the combined DT and
hotplug approach that the bus has which Johan Hovold fixed along with a
bunch of other issues that came up in the process. Srivinvas Kandagatla
also fixed some separate issues that have been lurking for a while in
the Qualcomm AP side, and there's a good set of AMD fixes from Vijendar
Mukunda too.
The previous values were completely bogus, and resulted in the computed
DPI ratio being much lower than reality, causing applications and UIs to
misbehave.
The new values were measured by myself with a ruler.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 8620cc2f99 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2")
Cc: <stable@vger.kernel.org> # v5.8+
Link: https://lore.kernel.org/r/20230714153720.336990-1-paul@crapouillou.net
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The kernel security team does NOT assign CVEs, so document that properly
and provide the "if you want one, ask MITRE for it" response that we
give on a weekly basis in the document, so we don't have to constantly
say it to everyone who asks.
Link: https://lore.kernel.org/r/2023063022-retouch-kerosene-7e4a@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because the linux-distros group forces reporters to release information
about reported bugs, and they impose arbitrary deadlines in having those
bugs fixed despite not actually being kernel developers, the kernel
security team recommends not interacting with them at all as this just
causes confusion and the early-release of reported security problems.
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/2023063020-throat-pantyhose-f110@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add ADI MAX77857/59 and MAX77831 Regulator device tree document.
Signed-off-by: Okan Sahin <okan.sahin@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230717050736.10075-2-okan.sahin@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Regulator driver for MAX77857/59 and MAX77831.
The MAX77857 is a high-efficiency, high-performance
buck-boost converter targeted for systems requiring
a wide input voltage range (2.5V to 16V).
The MAX77859 is high-Efficiency Buck-Boost Converter
for USB-PD/PPS Applications. It has wide input range
(2.5V to 22V)
The MAX77831 is a high-efficiency, high-performance
buck-boost converter targeted for systems requiring
wide input voltage range (2.5V to 16V).
Signed-off-by: Okan Sahin <okan.sahin@analog.com>
Link: https://lore.kernel.org/r/20230717050736.10075-3-okan.sahin@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The example in audio-graph-card2 binding is incomplete, uses
undocumented compatibles strings, and doesn't follow typical .dts
formatting. Rather than try to fix with what would probably be a lengthy
example, just drop the example.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230707221725.1071292-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20230711034846.69437-5-frank.li@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230711034846.69437-4-frank.li@vivo.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If CPU/Codec driver keeps its DAI node, we can directly identify actual
DAI by using snd_soc_get_dai_via_args().
This means we can use multi Component.
This patch enables multi Component support for Simple Card
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878rboo943.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If CPU/Codec driver keeps its DAI node, we can directly identify actual
DAI by using snd_soc_get_dai_via_args().
This means we can use multi Component.
This patch enables multi Component support on Audio Graph Card/Card2.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a5w4o949.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To use multi Component support, we need to check dai_args whether
Card could get DAI from args (CPU/Codec needs set dai_args on DAI driver).
If it could, we need to allocate dai_args for dlc.
This patch adds snd_soc_copy_dai_args() for it.
This is helper function for multi Component support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bkgko94e.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current snd_soc_is_matching_component() checks "of_node" or "dai_args".
Thus coping "of_node" only is not enough to use CPU as Platform.
This patch adds snd_soc_dlc_use_cpu_as_platform() and help it.
This is helper function for multi Component support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87cz10o94k.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To enable multi Component, Card driver need to get DAI via dai_args
to identify it. This patch adds snd_soc_get_dai_via_args() for it.
This is helper function for multi Component support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87edlgo94p.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC Card is using dlc (snd_soc_dai_link_component) to find
target DAI / Component to be used.
Current dlc has below 3 items to identify DAI / Component
(a) name for Component
(b) of_node for Component
(c) dai_name for DAI
(a) or (b) is used to identify target Component, and (c) is used
to identify DAI.
One of the biggest issue on it today is dlc needs "name matching"
for "dai_name" (c).
It was not a big deal when we were using platform_device, because we
could specify nessesary "dai_name" via its platform_data.
But we need to find DAI name pointer from whole registered datas and/or
each related driver somehow in case of DT, because we can't specify it.
Therefore, Card driver parses DT and assumes the DAI, and find its name
pointer. How to assume is based on each Component and/or Card.
Next biggest issue is Component node (a)/(b).
Basically, Component is registered when CPU/Codec driver was
probed() (X). Here, 1 Component is possible to have some DAIs.
int xxx_probe(struct platform_device *pdev)
{
...
(X) ret = devm_snd_soc_register_component(pdev->dev,
&component_driver,
&dai_driver, dai_driver_num);
...
}
The image of each data will be like below.
One note here is "driver" is included for later explanation.
+-driver------+
|+-component-+|
|| dai0||
|| dai1||
|| ...||
|+-----------+|
+-------------+
The point here is 1 driver has 1 Component, because basically driver
calles snd_soc_register_component() (= X) once.
Here is the very basic CPU/Codec connection image.
HW image SW image
+-- Board ------------+ +-card--------------------------+
|+-----+ +------+| |+-driver------+ +-driver------+|
|| CPU | <--> |CodecA|| ||+-component-+| |+-component-+||
|+-----+ +------+| ||| dai|<=>|dai |||
+---------------------+ ||+-----------+| |+-----------+||
|+-------------+ +-------------+|
+-------------------------------+
It will be very complex if it has multi DAIs.
Here is intuitive easy to understandable HW / SW example.
HW image SW image
+-- Board ---------------+ +-card--------------------------+
|+--------+ +------+| |+-driver------+ +-driver------+|
|| CPU ch0| <--> |CodecA|| ||+-component-+| |+-component-+||
|| | +------+| ||| ch0 dai|<=>|dai |||
|| | +------+| ||| || |+-----------+||
|| ch1| <--> |CodecB|| ||| || +-------------+|
|+--------+ +------+| ||| || +-driver------+|
+------------------------+ ||| || |+-component-+||
||| ch1 dai|<=>|dai |||
||+-----------+| |+-----------+||
|+-------------+ +-------------+|
+-------------------------------+
It will be handled as multi interface as "one Card".
card0,0: CPU-ch0 - CodecA
card0,1: CPU-ch1 - CodecB
^
But, here is the HW image example which will be more complex
+-- Basic Board ---------+
|+--------+ +------+|
|| CPU ch0| <--> |CodecA||
|| ch1| <-+ +------+|
|+--------+ | |
+-------------|----------+
+-- expansion board -----+
| | +------+|
| +->|CodecB||
| +------+|
+------------------------+
We intuitively think we want to handle these as "2 Sound Cards".
card0,0: CPU-ch0 - CodecA
card1,0: CPU-ch1 - CodecB
^
But below image which we can register today doesn't allow it,
because the same Component will be connected to both Card0/1,
but it will be rejected by (Z).
+-driver------+
|+-component-+|
+-card0-------------------------+
||| || +-driver------+|
||| || |+-component-+||
||| ch0 dai|<=>|dai |||
||| || |+-----------+||
||| || +-------------+|
+-------------------------------+
|| ||
+-card1-------------------------+
||| || +-driver------+|
||| || |+-component-+||
||| ch1 dai|<=>|dai |||
||| || |+-----------+||
||| || +-------------+|
+-------------------------------+
|+-----------+|
+-------------+
static int soc_probe_component()
{
...
if (component->card) {
(Z) if (component->card != card) {
dev_err(component->dev, ...);
return -ENODEV;
}
return 0;
}
...
}
So, how about to call snd_soc_register_component() (= X) multiple times
on probe() to avoid buplicated component->card limitation, to be like
below ?
+-driver------+
+-card0-------------------------+
|| | +-driver------+|
||+-component-+| |+-component-+||
||| ch0 dai|<=>|dai |||
||+-----------+| |+-----------+||
|| | +-------------+|
+-------------------------------+
| |
+-card1-------------------------+
|| | +-driver------+|
||+-component-+| |+-component-+||
||| ch1 dai|<=>|dai |||
||+-----------+| |+-----------+||
|| | +-------------+|
+-------------------------------+
+-------------+
Yes, looks good. But unfortunately it doesn't help us for now.
Let's see soc_component_to_node() and snd_soc_is_matching_component()
static struct device_node
*soc_component_to_node(struct snd_soc_component *component)
{
...
(A) of_node = component->dev->of_node;
...
}
static int snd_soc_is_matching_component(...)
{
...
(B) if (dlc->of_node && component_of_node != dlc->of_node)
...
}
dlc checkes "of_node" to identify target component (B),
but this "of_node" came from component->dev (A) which is added
by snd_soc_register_component() (X) on probe().
This means we can have different "component->card", but have same
"component->dev" in this case.
Even though we calls snd_soc_register_component() (= X) multiple times,
all Components have same driver's dev, thus it is impossible to
identified the Component.
And if it was impossible to identify Component, it is impossible to
identify DAI on current implementation.
So, how to handle above complex HW image today is 2 patterns.
One is handles it as "1 big sound card".
The SW image is like below.
SW image
+-card--------------------------+
|+-driver------+ +-driver------+|
||+-component-+| |+-component-+||
||| ch0 dai|<=>|dai |||
||| || |+-----------+||
||| || +-------------+|
||| || +-driver------+|
||| || |+-component-+||
||| ch1 dai|<->|dai |||
||+-----------+| |+-----------+||
|+-------------+ +-------------+|
+-------------------------------+
But the problem is not intuitive.
We want to handle it as "2 Cards".
2nd pattern is like below.
SW image
+-card0-------------------------+
|+-driver------+ +-driver------+|
||+-component-+| |+-component-+||
||| ch0 dai|<=>|dai |||
||+-----------+| |+-----------+||
|+-------------+ +-------------+|
+-------------------------------+
+-card1-------------------------+
|+-driver------+ +-driver------+|
||+-component-+| |+-component-+||
||| ch1 dai|<=>|dai |||
||+-----------+| |+-----------+||
|+-------------+ +-------------+|
+-------------------------------+
It handles as "2 Cards", but CPU part needs to be probed as 2 drivers.
It is also not intuitive.
To solve this issue, we need to have multi Component support.
In current implementation, we need to identify Component first
to identify DAI, and it is using name matching to identify DAI.
But how about to be enable to directly identify DAI by unique way
instead of name matching ? In such case, we can directly identify DAI,
then it can identify Component from DAI.
For example Simple-Card / Audio-Graph-Card case, it is specifying DAI
via its node.
Simple-Card
sound-dai = <&cpu-sound>;
Audio-Graph-Card
dais = <&cpu-sound>;
If each CPU/Codec driver keeps this property when probing,
we can identify DAI directly from Card.
Being able to identify DAI directly means being able to identify its
Component as well even though Component has same dev (= B).
This patch adds new "dai_node" for it.
To keeping compatibility, it checks "dai_node" first if it has,
otherwise, use existing method (name matching).
Link: https://lore.kernel.org/r/87fskz5yrr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fs5wo94v.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current ASoC is specifying and checking DAI name.
But where it came from and how to check was ambiguous.
This patch adds snd_soc_dai_name_get() / snd_soc_dlc_dai_is_match()
and makes it clear.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h6qco952.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>