Pedro Tammela says:
====================
net/sched: fixes for sch_qfq
Patch 1 fixes a regression introduced in 6.4 where the MTU size could be
bigger than 'lmax'.
Patch 3 fixes an issue where the code doesn't account for qdisc_pkt_len()
returning a size bigger then 'lmax'.
Patches 2 and 4 are selftests for the issues above.
====================
Link: https://lore.kernel.org/r/20230711210103.597831-1-pctammela@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A packet with stab overhead greater than QFQ_MAX_LMAX should be dropped
by the QFQ qdisc as it can't handle such lengths.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Lion says:
-------
In the QFQ scheduler a similar issue to CVE-2023-31436
persists.
Consider the following code in net/sched/sch_qfq.c:
static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch,
struct sk_buff **to_free)
{
unsigned int len = qdisc_pkt_len(skb), gso_segs;
// ...
if (unlikely(cl->agg->lmax < len)) {
pr_debug("qfq: increasing maxpkt from %u to %u for class %u",
cl->agg->lmax, len, cl->common.classid);
err = qfq_change_agg(sch, cl, cl->agg->class_weight, len);
if (err) {
cl->qstats.drops++;
return qdisc_drop(skb, sch, to_free);
}
// ...
}
Similarly to CVE-2023-31436, "lmax" is increased without any bounds
checks according to the packet length "len". Usually this would not
impose a problem because packet sizes are naturally limited.
This is however not the actual packet length, rather the
"qdisc_pkt_len(skb)" which might apply size transformations according to
"struct qdisc_size_table" as created by "qdisc_get_stab()" in
net/sched/sch_api.c if the TCA_STAB option was set when modifying the qdisc.
A user may choose virtually any size using such a table.
As a result the same issue as in CVE-2023-31436 can occur, allowing heap
out-of-bounds read / writes in the kmalloc-8192 cache.
-------
We can create the issue with the following commands:
tc qdisc add dev $DEV root handle 1: stab mtu 2048 tsize 512 mpu 0 \
overhead 999999999 linklayer ethernet qfq
tc class add dev $DEV parent 1: classid 1:1 htb rate 6mbit burst 15k
tc filter add dev $DEV parent 1: matchall classid 1:1
ping -I $DEV 1.1.1.2
This is caused by incorrectly assuming that qdisc_pkt_len() returns a
length within the QFQ_MIN_LMAX < len < QFQ_MAX_LMAX.
Fixes: 462dbc9101 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Reported-by: Lion <nnamrec@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
QFQ only supports a certain bound of MTU size so make sure
we check for this requirement in the tests.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
25369891fc deletes a check for the case where no 'lmax' is
specified which 3037933448 previously fixed as 'lmax'
could be set to the device's MTU without any bound checking
for QFQ_LMAX_MIN and QFQ_LMAX_MAX. Therefore, reintroduce the check.
Fixes: 25369891fc ("net/sched: sch_qfq: refactor parsing of netlink parameters")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The AC5/AC5X SoC has a NAND flash controller (NFC). Add this to
the base SoC dtsi file as a disabled node. The NFC integration
on the AC5/AC5X only supports SDR timing modes up to 3 so requires a
dedicated compatible property so this limitation can be enforced.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The mixer, PCM prepare, MIDI, synth driver, and procfs callbacks are all
always invoked with IRQs enabled, so there is no point in saving the
state.
snd_emu1010_load_firmware_entry() is called from emu1010_firmware_work()
and snd_emu10k1_emu1010_init(); the latter from snd_emu10k1_create() and
snd_emu10k1_resume(), all of which have IRQs enabled.
The voice and memory functions are called from mixed contexts, so they
keep the state saving.
The low-level functions all keep the state saving, because it's not
feasible to keep track of what is called where.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230712145750.125086-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-39-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-38-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Acked-by: Gao Xiang <xiang@kernel.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230705190309.579783-37-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-36-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-35-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-34-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-33-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-32-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-31-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Joel Becker <jlbec@evilplan.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-30-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-29-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-28-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-27-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-26-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230705190309.579783-25-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Reviewed-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230705190309.579783-24-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230705190309.579783-23-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230705190309.579783-22-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230705190309.579783-21-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230705190309.579783-20-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230705190309.579783-19-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230705190309.579783-18-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230705190309.579783-17-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230705190309.579783-16-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230705190309.579783-15-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230705190309.579783-14-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
After adding the missing notifier.h header, let's order all includes
alphabetically.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
It was supposed to say 'for' not 'fo'.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
As all level 2 and level 3 caches are unified, add required
cache-unified and cache-level properties to fix warnings like:
lg1312-ref.dtb: l2-cache0: 'cache-level' is a required property
Acked-by: Chanho Min <chanho.min@lge.com>
Link: https://lore.kernel.org/r/20230421223201.115439-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
As all level 2 and level 3 caches are unified, add required
cache-unified and cache-level properties to fix warnings like:
nuvoton-npcm845-evb.dtb: l2-cache: 'cache-level' is a required property
nuvoton-npcm845-evb.dtb: l2-cache: 'cache-unified' is a required property
Reviewed-by: Tomer Maimon <tmaimon77@gmail.com>
Link: https://lore.kernel.org/r/20230421223154.115312-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
A recent change to start counting SuperH IRQ #s from 16 breaks support
for the Hitachi HD64461 companion chip.
Move the offchip IRQ base and HD64461 IRQ # by 16 in order to
accommodate for the new virq numbering rules.
Fixes: a8ac296114 ("sh: Avoid using IRQ0 on SH3 and SH4")
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230710233132.69734-1-contact@artur-rojek.eu
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
When booting rts7751r2dplus_defconfig on QEMU, the system hangs due to
an interrupt storm on IRQ 20. IRQ 20 aka event 0x280 is a cascaded IRL
interrupt, which maps to IRQ_VOYAGER, the interrupt used by the Silicon
Motion SM501 multimedia companion chip. As rts7751r2d_irq_demux() does
not take into account the new virq offset, the interrupt is no longer
translated, leading to an unhandled interrupt.
Fix this by taking into account the virq offset when translating
cascaded IRL interrupts.
Fixes: a8ac296114 ("sh: Avoid using IRQ0 on SH3 and SH4")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/r/fbfea3ad-d327-4ad5-ac9c-648c7ca3fe1f@roeck-us.net
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/2c99d5df41c40691f6c407b7b6a040d406bc81ac.1688901306.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
In the case where a sysfs file cannot be opened the error return path
fcloses file pointer fpl, however, fpl has already been closed in the
previous stanza. Fix the double fclose by removing it.
Fixes: 10b98a4db1 ("selftests: ALSA: Add test for the 'pcmtest' driver")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230712140122.457206-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This code has two problems:
1) The devm_ioremap() function returns NULL, not error pointers.
2) It's checking the wrong variable. ->mmio instead of ->acp_mmio.
Fixes: d8f48fbdfd ("soundwire: amd: Add support for AMD Manager driver")
Suggested-by: "Mukunda,Vijendar" <vijendar.mukunda@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/9863b2bf-0de2-4bf8-8f09-fe24dc5c63ff@moroto.mountain
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Use new cifs_smb_ses_inc_refcount() helper to get an active reference
of @ses and @ses->dfs_root_ses (if set). This will prevent
@ses->dfs_root_ses of being put in the next call to cifs_put_smb_ses()
and thus potentially causing an use-after-free bug.
Fixes: 8e3554150d ("cifs: fix sharing of DFS connections")
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
pSMB->hdr.Protocol is an array of size 4 bytes, hence when the compiler
analyzes this line of code
parm_data = ((char *) &pSMB->hdr.Protocol) + offset;
it legitimately complains about the fact that offset points outside the
bounds of the array. Notice that the compiler gives priority to the object
as an array, rather than merely the address of one more byte in a structure
to wich offset should be added (which seems to be the actual intention of
the original implementation).
Fix this by explicitly instructing the compiler to treat the code as a
sequence of bytes in struct smb_com_transaction2_spi_req, and not as an
array accessed through pointer notation.
Notice that ((char *)pSMB) + sizeof(pSMB->hdr.smb_buf_length) points to
the same address as ((char *) &pSMB->hdr.Protocol), therefore this results
in no differences in binary output.
Fixes the following -Wstringop-overflow warnings when built s390
architecture with defconfig (GCC 13):
CC [M] fs/smb/client/cifssmb.o
In function 'cifs_init_ace',
inlined from 'posix_acl_to_cifs' at fs/smb/client/cifssmb.c:3046:3,
inlined from 'cifs_do_set_acl' at fs/smb/client/cifssmb.c:3191:15:
fs/smb/client/cifssmb.c:2987:31: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
2987 | cifs_ace->cifs_e_perm = local_ace->e_perm;
| ~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
In file included from fs/smb/client/cifssmb.c:27:
fs/smb/client/cifspdu.h: In function 'cifs_do_set_acl':
fs/smb/client/cifspdu.h:384:14: note: at offset [7, 11] into destination object 'Protocol' of size 4
384 | __u8 Protocol[4];
| ^~~~~~~~
In function 'cifs_init_ace',
inlined from 'posix_acl_to_cifs' at fs/smb/client/cifssmb.c:3046:3,
inlined from 'cifs_do_set_acl' at fs/smb/client/cifssmb.c:3191:15:
fs/smb/client/cifssmb.c:2988:30: warning: writing 1 byte into a region of size 0 [-Wstringop-overflow=]
2988 | cifs_ace->cifs_e_tag = local_ace->e_tag;
| ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
fs/smb/client/cifspdu.h: In function 'cifs_do_set_acl':
fs/smb/client/cifspdu.h:384:14: note: at offset [6, 10] into destination object 'Protocol' of size 4
384 | __u8 Protocol[4];
| ^~~~~~~~
This helps with the ongoing efforts to globally enable
-Wstringop-overflow.
Link: https://github.com/KSPP/linux/issues/310
Fixes: dc1af4c4b4 ("cifs: implement set acl method")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Most SPI NOR devices do not require a specific compatible, their ID can
in general be discovered with the JEDEC READ ID opcode. In this case,
only the "jedec,spi-nor" generic compatible is expected. Clarify this
information in the compatible description to (i) help device-tree
writers and (ii) prevent further attempts to extend this list with
useless information.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230616140054.2788684-1-miquel.raynal@bootlin.com
[ta: s/JEDEC/JEDEC SFDP for clarity and s/JEDEC READ ID/READ ID as
the opcode is not part of the JEDEC SFDP standard.]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>